134,694 used machines on RESALE, but how to find them? Machine Search
surface area: 1168 x 508 mm max. table load: 1800 kg travel -x axis: 1016 mm travel -y axis: 508 mm travel -z axis: 508 mm spindle taper: SK40 spindle speed: 10000 U/min spindle capacity: 15 kW spindle torque max.: 99 Nm rapid traverse y/x/z axis: 28 m/min control: HURCO MAX5 total power requirement: 20 kW weight of the machine ca.: 4,15 t dimensions of the machine ca.: 3,7 x 3,3 x 2,5 m The machine is like new !, only 61 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 360 mm - Max. tool weight: 7 kg Accessories: documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC Lathe Manufacturer: Gildemeister Type twin 42 Year of manufacture 2005 Control Siemens 840D Turning length 210mm 2 X 12-fold turret all places are powered Engine A 83700 Spindle A 50809 Machine has a defect in the pick-up spindle, probably bearing With Breuning Profimat bar loading magazine
surface area: 1321 x 610 mm max. table load: 1800 kg travel -x axis: 1270 mm travel -y axis: 508 mm travel -z axis: 508 mm spindle cone: SK40 number of spindle speeds: 12000 U/min spindle capacity: 15 kW spindle torque max.: 82 Nm rapid traverse y/x/z axis: 28 m/min control: HURCO MAX5 total power requirement: 21 kW weight of the machine ca.: 4,25 t dimensions of the machine ca.: 4,1 x 3,35 x 2,6 m the machine is like new!, only 136 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 250 mm - Max. tool weight: 7 kg Accessories: documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 750 mm, 400 mm, 500 mm
Inv. Num. : 8792 Type: Mikron VCE 750 Producer: HAAS Created: 1997 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 350 mm Maximum vertical spindle speed: 7500 1/min X-axis travel: 750 mm Y-axis travel: 400 mm Travel Z axis: 500 mm Cone: SK 40 Number of all tools: 20 pieces Equipment: 4. Axis 2023: Replacement of the manual gearbox of the tool changer Replacement of the tool plate magazine
Manufacturer: DMG MORI Model: CTV 250 DF Year of Manufacture: 2019 Type of Machine : Power skiving machine / CNC Turning Center Max spindle speed: 6,000 rpm Secondary spindle speed: 7,000 rpm Machine weight: 7,000 kg Power supply: 400 V, 50 Hz, L1-L2-L3-N-PE phase Power consumption: 65 kVA Max current: 95 A Fuse: 100 A / 1.00 kA Max voltage: 440 V Control voltage: 230 V / 24 V Spare parts are available for sale separately Find more here - .ucymachines/ Contact us at - sales@ucymachines
The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc 31iMB in standard version, including the following special equipment of the machine: control system dialogue in Czech language Automatic tool change – 24 pcs Z-axis travel – 1500 mm with raised stand Chip conveyor Workpiece probe OMP-60 Tool probe TS-27R Spindle power 22/26 KW Horizontal spindle speed 5000 rpm. Manual rotating head, speed 3500 rpm. Spindle center cooling Tool magazine can be tilted out of the table space – next to the stand on the left
Bridge type Machining Centre ISPER HASP 643 WAVE - 30.000 rpm - travel 650x420x350 mm - CNC SELCA 4045D, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 700x400 mm, Longitudinal travel x axis: 650 mm, Cross travel y axis: 420 mm, Vertical travel z axis: 350 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 20.000 mm/1, Rapid feed x-y-z axes: 20.000 mm/1, Spindle taper type: HSK 40-E, Automatic tools change nr.: 20, Spindle speed: 0- 30.000 rpm, Spindle motor power: 8 Kw, Cnc: SELCA 4045D, Approx net weight: 4.500 Kg, Accessories: Chip conveyor, RENISHAW Probe
control: FANUC Series 31i Model 5 turning diameter: 540 mm turning length: 1040 mm c-axis: indexing: 0.001 ° turning speeds: -5000 U/min tool taper: ASA A2-6 Top turret tool hodler:: 12 y-travel: 170 (+/- 85) mm rapid traverse X-axis: 36 / 24 m/min rapid traverse Z-axis: 36 / 26 m/min Overall size: 8000 x 3000 x 3000 mm weight of the machine ca.: 12000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
vertical CNC turning center, year 2013, CNC 840D. Used machine in good condition. More info & price on IndustrialBuyer.
vertical CNC turning center, year 2008, CNC 0i-TC. Used machine in good condition. More info & price on IndustrialBuyer.
GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x300 mm, Regulating Wheel Dimensions: Ø355xØ152,4x300 mm
x-travel: 1050 mm y-travel: 570 mm z-travel: 510 mm Control: Siemens 828D Main spindle:: turning speed range - main spindle: 12000 min/-1 power capacity - main spindel: 16,5 / 11 kW max. Torque: 141 Nm tool taper: BT 40 distance spindle /table: 150 - 775 mm work table:: table surface area: 1300 x 570 mm max. table load: 1000 kg tool magazin:: number of toolpositions: 40 pos. tool taper: BT 40 max. tool diameter: 80 mm max. tool length: 300 mm max. tool weight: 8,0 kg change-time tool to tool: 1,2 sec change-time chip to chip: 3,2 sec feeds:: rapid traverse ( X / Y / Z ): 36 / 36 / 30 m/min workpiece height max.: 590 mm total power requirement: 40,9 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,5 x 3,1 x 2,98 m 3-axis vertical CNC machining center - Siemens 828D CNC control and workshop-oriented programming support Shop Mill - 40-tool tool changer (BT 40) - Bas ...
Incl. chip conveyor Dimensions: 3700x2270x2820mm Chip conveyor dimensions: 800x4000x1500mm Condition and details see pictures Year of manufacture 1996
Code: 0407 Brand: OMGA Model: BA 525 A - CE Standard Hardware assembly center for door and window frames - CE Standard Technical data: Work table covered with felted scratch proof strips , rear part pneumatically inclinable from 0° to 10° with intermediate angles Composition: Carriage with self-fed pneumatic screwer with Böllhoff loader, work stroke controlled by a pneumatic cylinder with a inclusion-exclusion system , height adjustment Right/left backstops for height positioning of right/left handle holes Drilling unit with 3-bit head for the execution of handle holes Pneumatically operated hydraulic shear for cutting hardware Work table size mm 3500 x 1230 Work table height mm 920 Max working dimension mm 2800 x 2450 Min working dimension mm 350 Dust collector Working pressure 6/7 bar Overall dimensions mm 3600 x 1700 x 1000 h Weight kg 480
turning diameter: 500 mm turning length: 1200 mm control: Siemens 840D greates pass round over bed: 700 mm Main spindle:: turning speed range - main spindle: 20 - 5000 min/-1 power capacity - main spindel: 25 /34 kW C-Axis: 0,0001 ° spindle diameter: 65 mm milling spindle: milling spindle motor: 23 / 13 kW milling head speed: 12000 U/min b-axis: +/- 120 ° axis stroke:: x-axis: 490 mm y-axis: +/- 100 mm z-axis: 1300 mm feeds:: rapid traverse ( X / Y / Z ): 60 / 22,5 / 30 m/min feed power: 5,6 / 5,6 / 7,4 kN number of toolpositions: 24 pos. tool taper: HSK A 63 total power requirement: - kW weight of the machine ca.: 15 t dimensions of the machine ca.: 6 x 3 x 2,3 m CNC turning and milling center - 5 axes simultaneous - CNC control Siemens 840D Ergo Line with ShopTurn - C-axis (0.0001°) - Milling head with B-axis - Y-axis - Coolant device/paper belt filter (through Spindle) - Chip c ...
Key data: 550 mm, 1020 mm
Ex-Mercedes-Benz F1 Motorsport – Excellent condition Mori Seiki MT2000Z/1000 5-axis turning / milling center Year of manufacture 2001 MSG 502 MAPPS Control (Dialog) Circumferential diameter over bed 850 mm Circumferential diameter over carriage 600 mm Max. turning diameter 550 mm Max. turning length 1,020 mm Max. spindle speed 4,500 rpm. C-axis 0.001° Upper tool carriage – single tool for turning/milling/drilling with automatic tool change X-axis travel (transverse) 565 mm Z-axis travel (longitudinal) 1,077 mm Y-axis axis travel (vertical/off-center) 160 mm (+/- 80 mm) B-axis swivel range +/- 120° Milling spindle drive power 15 kW Milling spindle speeds up to 6,000 rpm. Tool holder CAPTO C6 40-cavity tool magazine Lower Tool Carriage – 12-Station Turret with Live Tools Tool drive power 7.5 kW Tool speeds up to 4,0 ...
turning diameter: 210 mm turning length: 700 mm control: Okuma OSP-E 100 L total power requirement: 35,7 kVA weight of the machine ca.: 7,1 t dimensions of the machine ca.: 2660 x 2000 x 2330 m CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360° x 0.001° Rapid traverse: 400 rpm Disc turret: 2 x ...
x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm total power requirement: kW weight of the machine ca.: 8800 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control Fanuc OM Travel distances X/Y/Z: 450 x 300 x 400 mm Table size 600 x 300 mm Spindle speed 8,000 min-1 Tool magazine for 16 Wkzg. SK 30
CNC Vertical - Machining Center HERMLE B 300 V With track control Heidenhain iTNC 530 Year of manufacture: 12/2010 Travel : X 800 Y 600 Z 500 Speed range : 20 – 15,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 560 mm clamping surface Vertical tool changer with 30 magazine positions ( SK 40 ) IKZ 40 bar Scraper belt conveyor Coolant Setup Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3D Probe Renishaw Control cabinet cooling unit ( RITTAL) Spindle Oil Cooler 4 Pieces Height Adjustable Machine Shoes Operating Instructions
Key data: 762 mm, 508 mm, 508 mm
Inv. Num. : 9268 Type: VF-2SSYT Producer: HAAS Created: 2021 Parameters: Switch-on hours: 13517 h Operating hours: 6225 h Work table length: 914 mm Work table width: 457 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm Spindle power: 22.4 kW Cone: SK 40 Number of Stacking Positions: 31 pieces Machine weight: 3450 kg Equipment: Chip conveyor Renishaw tool probe Renishaw workpiece probe High-pressure tool cooling through the spindle center Extraction system from the machine cover
Centerless grinding machine manufactured in 2008. This DANOBAT 327 MDA features a maximum wheel width for plunge grinding of 500 mm and a peripheral wheel speed of 50 m/s. It has a grinding wheel motor power of 55 kW and a regulating wheel speed that is infinitely variable from 10 to 225 min⁻¹. If you are looking to get high-quality grinding capabilities, consider the DANOBAT 327 MDA machine we have for sale. Contact us for further details.
3 slides 3 revolvers with 12 positions each driven main and subspindle 2 C-axis Y axis, workpiece unloading device, high pressure coolant system with paper filter chip conveyor, Control: Siemens 840D, Country of origin: Italy, Operating hours: 28.900, Number of spindles: 2, Number of linear axis + C axis: 8+2, Max bar diameter [mm]: 65, Spindle speed [rpm]: 5.000, Spindle motor [kW]: 20, Auto bar loader: Iemca Master 880 P/R, Machine weight approx. [kg]: 9.000
This 3-axis SCM TECH Z25 PLUS H-R4 was manufactured in 2005. It features a working area of 2500 x 1000 mm and a travel range of 2980 mm on the X-axis, 1280 mm on the Y-axis, and 200 mm on the Z-axis. The machine is equipped with 16 spindles operating at 4000 rpm and an electric spindle with a maximum speed of 18,000 rpm. If you are looking to get high-quality CNC processing capabilities, consider the SCM TECH Z25 PLUS H-R4 machine we have for sale. Contact us for further details.
A large-format CNC twin-spindle vertical turning machine WMZ is available. Travel X1/X2: 2950mm/2650mm, travel X: 5600mm, travel Z1/Z2: 3200mm/2830mm, feed rate X: 32m/min, feed rate Z: 20m/min, max. workpiece diameter: 3800mm, max. swing in working area: 4000mm, min. workpiece diameter 4-axis internal machining/external machining: 1250mm/1500mm, min. workpiece diameter 2-axis internal machining: 450mm. Table speed: 100rpm, tool stations: 2x47, tool interface: Capto C8, max. tool diameter: 120mm, max. tool length: 400mm, max. tool weight: 20kg, spindle power: 240kW/202kW. Machine dimensions X/Y/Z: approx. 15600mm/10350mm/5750mm, control: Siemens Sinumerik 840D sl. Documentation available. An on-site inspection is possible.
A large-format CNC twin-spindle vertical turning machine WMZ is available. Travel X1/X2: 2450mm/2750mm, travel Z1/Z2: 2700mm/2300mm, max. workpiece diameter: 2800mm, max. swing diameter in the working area: 3000mm, min. workpiece diameter for 4-axis external machining/internal machining: 1250mm/1500mm, min. workpiece diameter for 2-axis internal machining: 450mm, rotary table speed: 230rpm, feed rate X: 32m/min, feed rate Z: 20m/min, B-axis speed: 150rpm, spindle power: 33kW, tool stations: 2x47, tool interface: Capto C8, max. tool diameter: 120mm, max. tool length: 400mm, max. tool weight: 20kg. Machine dimensions X/Y/Z: approx. 9350mm/8600mm/5700mm, control system: Siemens SINUMERIK 840D sl. Documentation available. An on-site inspection is possible.
x-travel: 2600 mm y-travel: 1100 mm z-travel: 920 mm tool magazin:: 30 internal coolant system feed: 40 Bar tool taper: SK50 total power requirement: --- kW weight of the machine ca.: 26,1 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 760 mm y-travel: 460 mm z-travel: 460 mm control: TNC 620 Heidenhain Main spindle:: turning speed range - main spindle: max. 12.000 min/-1 power capacity - main spindel: 14 / 10 kW Torque: 89 / 63,7 Nm tool taper: SK 40 work table:: table surface area: 900 x 410 mm max. table load: 350 kg T-slots: 4x Tool-Presetter:: number of toolpositions: 24 pos. max. tool diameter: 130 mm max. tool length: 200 mm max. tool weight: 8,0 kg feeds:: rapid traverse ( X / Y / Z ): 36 m/min total power requirement: 20 kVA weight of the machine ca.: 3,3 t dimensions of the machine ca.: 3,0 x 2,5 x 2,9 m Documents: digital Chip-Tray: Automatic Tool Changer: Coolantsystem: interface 4. axis: work light: test probe: Blum TC 50 elektr. hand wheel: integriert / integrated Tailstock: TTS-125 indexing attachment: CNC Machiningcenter Vertical SPINNER - VC 750 The data for this ad was created wi ...
5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 18,000 mm Y-axis travel: 1150 mm Travel Z-axis: 715 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Many tool holders, including angle head and saw blade Saw blade diameter: 500 mm Minimum quantity spraying Autonomous tensioner displacement 20 pneumatic material tensioners Pendulum operation through two light barrier areas Label Printers Barcode scanner Chip conveyor belt Suction Manual control panel Spindle in mint condition (pull-in force is just under 16 kN) Loading is included in the price Weight: approx. 14,000 kg
control: FANUC 18i TB turning diameter: 280 mm turning length: 400 mm c-axis: indexing: 0.001 ° turning speeds: -6000 U/min tool taper: DIN ASA A2-5 Top turret tool hodler:: 12 rapid traverse X-axis: 24 m/min rapid traverse Z-axis: 30 m/min Overall size: 5000 x 2000 x 2600 mm weight of the machine ca.: 6300 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
AFM TAE 45N CNC turning center was built in 2005 in Poland by Andrychowska Fabryka Maszyn S.A. The machine is designed for precision machining of workpieces with a maximum diameter of 390 mm and length of 1000 mm. It is distinguished by the use of many well-proven components, guaranteeing high accuracy and dimensional repeatability of the manufactured parts, even during many years of intensive use. These include e.g. the reliable spindle, which is driven by a high-powered motor and reaches a maximum speed of 4500 rpm. The SAUTER VDI40 12-position turret with driven tools, on the other hand, enables to perform several operations in one clamping, reducing production time and increasing efficiency. All this is complemented by a compact design that maintains high stability during operation and facilitates daily use and maintenance. The AFM TAE 45N is operated from an intelligent SIEMENS S ...
CNC PROFI CK6156 CNC turning center was built in 2015 in Poland by CNC PROFI. The machine has worked a small number of hours and is in very good technical condition. The CNC PROFI CK6156 is designed for precision machining of workpieces with a maximum diameter of 560 mm and length of 1000 mm. The turning process is performed fully automatically in the X and Z axes by means of a spindle and cutting tools taken from an 8-position turret. The spindle, driven by a high-powered motor, reaches a maximum speed of 1800 rpm. Stable support of the workpiece during turning is provided by a tailstock that increases the accuracy of the entire process. This is complemented by a SIEMENS CNC controller with an intuitive interface and access to many advanced functions. All this makes the offered CK6156 CNC turning center an excellent choice for the production of precise and repeatable parts used in ma ...
The machine is in good technical condition, after prior agreement it is possible to test it. Only 600 mth of mileage! Table size 1300X700mm, X-1220, Y-710, Z- 630mm, machine power 37kw, spindle speed 60-10000rpm, machine weight 9500Kg, control system Heidenhain TNC 640, tool magazine 24 positions.
x-travel: 2165 mm y-travel: 1600 mm z-travel: 1345 mm : 2300 mm Turning Speed of the Rolls: 2300 x 1684 mm : 7000 kg notching width: 300 1/min : 0,0001 ° Positioning speed: 10000 1/min : 37 /30 kW : 150 ° Feeds (X,z,u,w-axis): 0,0001 (360°) ° : ISO 50 : 42 Control: Mazatrol Smooth X Rapid Travel X / Y / Z-Achse: 42 m/min total power requirement: 141 kVA weight of the machine ca.: 51,5 t dimensions of the machine ca.: 4,4 x 5,2 , 7,8 m 5-axis multitasking machine featuring: - Mazatrol Smooth X CNC control - Direct-drive table with C-axis accuracy of 0.0001° - Milling spindle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible.
Key data: 250 mm, 400 mm
Technical data: Manufacturer: Spinner Type: TC300-52 SMMCY Year of Make: 2012 Control: Siemens 840D SL Travel: X1 180 mm X2 110 mm Z 450 mm Y +40/-40 mm Turning length: 400 mm Turning diameter: 250/200 mm Swing diameter: 400 mm Switch-on hours: (Information to follow) Working Spindle 1 Speed: 5,000 rpm Torque: 96/121 Nm Power: 15/19 kW Bar Passage: 52 mm Working spindle 2 Speed: 7,000 rpm Torque: 38 Nm Power: 6 kW Tool turret 1 and 2 Number of stations: 12x Recording: VDI 25 Max. speed AGW: 6,000 rpm Power: 8/2.6 kW Dimensions and weight Dimensions: 2,200 x 2,000 x 2,000 mm Weight: approx. 4,600 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Parts Conveyor Belt High Pressure Pump Chip conveyor Interface for bar feeders 3-jaw chuck on sub-spindle and main spindle
Inv. Num. : 9105 Type: MIKRON VCE 800 PRO Producer: Agie Charmilles Created: 2011 Parameters: Control system: HEIDENHAIN iTNC 530 Work table length: 910 mm Work table width: 500 mm Maximum table load (uniform): 1100 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Machine weight: 5000 kg
This 4-axis Felder Format4 H100 CNC processing center was manufactured in 2025. It features a spacious table size of 3100 x 2100 mm and includes a 16-position linear tool changer, 12 vertical drilling spindles, and a groove saw. If you are looking to get high-quality CNC machining capabilities, consider the Felder Format4 H100 machine we have for sale. Contact us for further details.
Labeling machine for sale with optical centering 6000 bphTechnical Specifications & Performance DataThis P.E. Labellers rotary adhesive labeler with optical centering is engineered for precision bottle decoration within a used bottling line or new installations. Built for consistent, high-quality labeling across beverage production environments, it balances speed with accuracy and repeatability.Manufacturer / Model: P.E. Labellers – 8T 4S 4E adhesive SL GlueYear of manufacture: 2007Production speed: up to 6,500 bottles per hour (bph)Stations / Plates: 4 adhesive stations; 8 motorized plates with dedicated photocellsOptical centering: Advanced system for precise label alignment on decorated, embossed, or irregular bottlesLabeling applications: Body, back, neck and optional L-/U-seal for caps (via dedicated adhesive unit on trolley)Container types: PET and glass bottles; adaptable for ot ...
This 3-axis VITAP Point K2 TOP 2.0 was manufactured in 2018. It features continuous machining with a maximum workpiece weight of 80 kg and dimensions of Y 1200 mm and Z 50 mm. The machine includes an automatic 4-station tool changer and a dual 0” reference laser for precise positioning. If you are looking to get high-quality CNC processing capabilities, consider the VITAP Point K2 TOP 2.0 machine we have for sale. Contact us for further details.
x-travel: 1100 mm y-travel: 600 mm z-travel: 510 mm Table dimensions: 1300 x 600 mm table load: 1,0 t tool taper: ISO 40 DIN 69871A spindle turning speed range: 60 - 12000 U/min rapid traverse: 32 m/min power capacity: 10 / 17 kW no. of tools in the magazine: 32 Stück tool length - max.: 300 mm Tool diameter: 76 / 127 mm weight of tools max.: 8 kg tool changing time: 2,5 sec total power requirement: 30 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4400 x 2250 x 2920 mm Machine with only 3.275 spindle running hours ! Heidenhain iTNC 530 CNC control 32-station ATC Internal coolant system: 20 bar Coolant tank: 480 l Chip conveyor Heidenhain glass scales in X/Y/Z Oil-cooler The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control Siemens Sinumerik 828D Travel X/Y/Z: 1020 x 560 x 510 mm Spindle speed 8000 min-1 Tool magazine for 24 Wkzg. SK 40 IKZ Chip conveyor
An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling ...
CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...
CNC processing center manufactured in 1997. This WEINIG / DIMTER Unicontrol 10 features a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It includes a powerful cross-cut saw with a spindle speed of up to 3,000 rpm and a tenoning spindle motor power of 15 kW. If you are looking to get high-quality CNC processing capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details.
The machine is in good technical condition; it can be tested by prior arrangement.
Key data: 500 mm, 450 mm, 400 mm
CNC Vertical Machining Center DECKEL MAHO DMU 50 eVo linear With track control Heidenhain iTNC 530 Year of Make: 2008 Travel: X 500 Y 450 Z 400 Speed range: 0 – 18000 rpm infinitely variable ( HSK 63 ) With the following accessories: 2-axis NC swivel rotary table 500mm x 380mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) Full protection cabin with sliding doors and interior lighting Electronic handwheel 3 D Probe Renishaw OMP 60 Tool measurement in the work area ( BLUM Laser ) IKZ 40 bar with paper belt filter Operating mode 3 + 4 Chip conveyor Signal light 4 colour Rotoclear Sealing air for linear measuring systems Coolant Setup Rinsing gun for chip rinsing 4 Height Adjustable Machine Shoes Operating Instructions
The machine is in good technical condition, after prior agreement it is possible to test it. CONTROL SYSTEM Control language - completely in Czech 3D simulation - yes Programming type - Dialogue and NC TABLE Table dimensions - 1,270 x 610 mm T-slots - 5 x 18 mm Max. table load - 1,350 kg Distance between the spindle face and the table - 150 - 760 mm TRAVELS X-axis - 1,070 mm Y-axis - 610 mm Z-axis - 610 mm SPINDLE Max. spindle speed - 12,000 rpm Spindle taper - SK40 TOOL MAGAZINE Number of tools - 24 Max. tool diameter - 80 mm Max. tool weight - 7 kg
The machine is in good technical condition, after prior agreement it is possible to test it. 0 Baumuller ball screws, spindle diameter 60 mm, SK 40, power 5.5kw/11 kW, torque 100Nm. Rotary tool changer 12. 3 axes and 4th axis only control board without 4th axis table..
maximum number of results exceeded
please refine your search
