horizontal machining center used for sale

This HELLER MCP-H 250 Horizontal Machining Centre was manufactured in 1999 in Germany. It is equipped with a HELLER Unipro 90 control unit and a tool taper SK50. The pallet size is 630 x 500 mm and the spindle speed range 45-6000 rpm. It has a NC rotary table, a pallet changing device and a tool magazin (chain) with 52 places. As additional equipment it comes with measuring device for BLUM TC 50, linear scales Heidenhain, BKW cooling unit for spindle cooling, Knoll coolant system with vacuum rotary filter and sludge discharge, Knoll chip conveyor, BKW cooling unit for cooling lubricant system, work area flushing and 2 pallets. The machine is in good condition for its age. Annual maintenance has been carried out over the entire service life. In 2018, the machine was retrofitted with the latest interface/receiver for the Blum TC 50. It is still under production and can be inspected at any  ...

This HAAS EC-400 Machining centers (horizontal) machine was manufactured in 2022. It comes with two pallets, each measuring 400x400 mm, equipped with M12 threaded holes and centering holes. Its main spindle speed is 15000 rpm. It includes 50 tool holders, Renishaw tool setting and zeroing system, internal cooling via the main spindle, chip conveyor, and internal camera system. Contact us anytime for further information.

Type: ACE H500 High pressure cooling through spindle Chipconveyor X-axes: 800 mm Y-axes: 650 mm Z-axes: 650 mm Table dimensions: 500 x 500 mm (indexing 1°) Depth of throat (uprights--spindlecenter): 150 > 800 mm Admission in spindle (ISO): BT 50 Power on the spindle: 11/15 kW Control: Fanuc Number of axes: 4 Toolstore: yes Tools: 40 positions Frequency : 20 > 5000 rpm Number of pallets : 2x Length: 3420 mm Depth: 5200 mm Height: 3040 mm Weight: 12,5 ton

Type: MCH-500 + 6APC automatic pallet changer with manual rotation high pressure cooling through spindle chipconveyor X-axes: 750 mm Y-axes: 680 mm Z-axes: 600 mm Table dimensions: 500 x 500 mm (indexing 1°) Admission in spindle (ISO): BT50 Power on the spindle: 18,5 kW Control: Fanuc 18i Toolstore: yes Tools: 90 positions Frequency : 1 > 6000 rpm (option) Number of pallets : 6 Length: 8400 mm Depth: 4000 mm Weight: 18 ton

Type: MCH-800 Distance of spindle end to table center: 300 gt; 1300 mm Distance of spindle center to table surface: 50 gt; 1050 mm X-axes: 1350 mm Y-axes: 1000 mm Z-axes: 1000 mm Table dimensions: 800 x 800 mm (indexing 1°) Max weight on the table: 2 ton Admission in spindle (ISO): ISO-50 Power on the spindle: 18,5 kW Control: Fanuc Series 18i-MB Toolstore: yes Tools: 90 positions Frequency : 1 > 6000 rpm (option) Power principal motor: 45 kVa Length: 11 meter Depth: 6 meter Weight: 24 ton

The DOOSAN HM 6300 is a 4-axis horizontal machining centre from 2009 with a CNC FANUC 31i-Mod.A control unit. It offers expansive axis movement: 1000 mm on X, 800 mm on Y, and 850 mm on Z, with rapid 48 m/min travel. The two 630 x 630 mm pallets, with a 1° indexing and 180° rotary change, support 1,200 kg each. The spindle, powered by a 30 kW motor, reaches 6000 rpm, and the 60-position tool chain accommodates various tool sizes. Accessories include a chip conveyor, Renishaw predisposition, and a high-pressure coolant system. Contact us for more details.

This 4-Axis DOOSAN HM 800, a 2008 horizontal machining centre, offers high performance with the CNC FANUC 18i–MB control system. It has extensive strokes: 1250 mm on the X-axis and 1000 mm on the Y and Z axes, with rapid movements of 24 m/min on all axes. The dual pallet system, each 800 x 800 mm, has a 1600 kg load capacity. Its spindle reaches 6000 rpm with a 22/26 kW motor output. A 90-position tool chain and high-pressure coolant system ensure optimal cutting. Contact us for more details.

Description: serial number: A3K2409 control: FANUC Series 15i-MB  , work mounting surface ,: length: 3048 mm , width: 1220 mm ,  , spindle speed range: 150-15000 rpm , max work piece weight: 5000 kg spindle taper: ISO 50 spindle power: 30 kW  , travels:  ,X-axis - 3150 mm  ,Y-axis - 1320 mm  ,Z-axis - 762 mm  ,A-axis - 90 degree  ,C-axis - 270 degree  ,  ,rapid traverse: , X, Z-axes: 24 m/min. Y-axis: 20 m/min. A,C-axes: 3600°/min.  , please also have a look at pdf files of this machine z-motion: 762 mm, max. workpiece weight between centers: 5,000 kg, x-motion: 3,150 mm, y-motion: 1,320 mm, control: FANUC Series 15i-MB, taper: ISO 50, power capacity - spindle: 30 kW, turning speed range: 150-15000 rpm, rapid motion: 20 - 24 m/min, weight approx.: 32,000 kg, Approx. Onsite Dimension ...

Pallet length: 400 mm Pallet width: 400 mm Longitudinal X: 650 mm Cross Y: 700 mm Vertical Z: 700 mm Number of pallets: 2   Positions ATC: 120   CNC Brand: Heidenhain 4 Axis Controlled simultenious New WEISS spindle in 2022 New Window SG Glass BLUM laser measuring Renishaw 3D Measuring taster Filtration and coolant system 600 Liter and 40 bar  X - Travel:               650mm Y - Travel:               700mm Z - Travel:               700mm B-Axis indexing:          360° Table Length:             450mm Table Width:              500mm Table load:               600 Number of pallets:        2  ...

Description: Well-maintained PAMA Speedmat HP3 Machining Centre with Pallet and Head Changer. Control SIEMENS Sinumerik 840 D sl Working area Workpiece dimensions (Ø x h) max.: 3,000 mm x 3,200 mm , Load capacity of pallet table max.: 8,000 kg Table dimensions: 1,250 x 1250 mm Work spindle diameter: 130 mm Number of interchangeable pallets: 2 Axis travel Axis travel X-axis: 3,000 mm Axis travel Y-axis: 2,000 mm Axis travel Z-axis: 3,200 mm + W-axis max.: 800 mm Table rotation B-axis: 360 Axis speed and Power transmission Table speed (B axis) max.: 7 upm Table torque max.: 48  , Feed rate X, Y, Z axis: 0.5 - 10,000 mm/min Feed force X, Y, Z axis max.: 20,000 N Rapid traverse X, Y, Z axis: 30 m/min Spindle drive speed max.: 6,500 rpm , (the actual speed at the tool varies depending on the machining head) Angle head TS 20 Tool changer Tool  ...

Description: serial number: 0233 control : Okuma OSP U100L  , travels: X-axis: 800 mm Y-axis: 800 mm Z-axis: 700 mm 2 pallets, dimensions: ,500 x 500 mm (x2) pallet rotation : 1°/360° spindle taper: SK50 spindle speed: 5000 rpm spindle power: 22/15 kW toolchanger positions: 60 internal spindle cooling chip conveyor accessories: , ready for workpiece probe ready for tool probe (repair required) approx. 15 working tools  , the accessories do not include the clamping tower (Spannturm), which is shown in one of the photos together with the machine  , the machine will be partly dismantled and ready for loading on low plate truck with width of 2,8 m  , please also have a look the the videos and the PDF document of this machine z-motion: 700 mm, x-motion: 800 mm, y-motion: 800 mm, control: Okuma OSP U100L, pallet table size: 500  ...

x-travel:560 mm y-travel:560 mm z-travel:600 mm control:Professional 3 (Fanuc 16i MA) rapid travel x/y/z:84/84/94 m/min feeds x/y/z -stepless:50000 mm/min spindle drive:22 kW spindle speed::14000 1/min max. torque on the spindle:167 Nm size of pallet:400x400 mm table load:500 kg working diameter:630 mm workpiece - installed height:1000 mm distance spindle center to table:80 -640 mm :70 -670 mm tool magazin::137 ISO 40 max. tool weight:8 kg max. tool diameter:70 mm tool length - max.:70/170 mm weight of the machine ca.:14 t total power requirement:260 kVA User Macro variables:82 This flexible manufacturing system consists of two Makino A 55 connected to a 28 pallet linear pool with 3 setup stations. One machine has a defect in the b-axis. Second machine has a defect in one linear axis. Complete system must be disassembled and loaded by buyer. We can help to find company with forklift tru ...

x-travel:3000 mm y-travel:2000 mm z-travel:1750 mm table-size:1600 x 2000 mm max. table load:11000 kg speeds:4000 U/min numbers of tools in magazin:60 b-axis:360 ° Servo motors are Siemens 611 IKZ pump has a max. of 120 bar

x-travel:750 mm y-travel:840 mm z-travel:865 mm weight of the machine ca.:23 t Cylinder Head Housing / Steel ZKG steel 2 spindles 4 axes A axis 360 x 0.001 Spindle: 20kW each, 8,000 rpm each HSK-A63 2 x 40 pos. Without loading / Transfer

x-travel:600 mm y-travel:655 mm z-travel:675 mm weight of the machine ca.:22 t dimensions of the machine ca.:4,0 x 3,20 x 3,20 m 2 spindles, 5 axes B axis 360 x 0.001 Spindle: 20kW each, 12,000 rpm HSK-A63 2 x 40 pos. For technical data see attached PDF Machining center G 320 AB with swivel changer Project: GM 4284/01-01 to 06 Process: Production of cylinder head cover Al Si 9 Cu 3 Minimum quantity lubrication 1-channel Lubrix 2x5bar/4x10bar Lubricant Eccocut Micro Plus20 Tool magazine 2x40, cone cleaning Tool holder HSK 63 tool breakage control Tool monitoring Artis probe BDE connection Control Siemens 840D Solution Line NCU 720.2 (730.2) PN with PLC319-3PN/DP

x-travel:750 mm y-travel:800 mm z-travel:865 mm weight of the machine ca.:23 t dimensions of the machine ca.:4,93 x 3,50 x 3,28 m b-axis:360 (0,001) ° with B axis 360 x 0.001 2 spindles (each 29 KW, 12,000 rpm) Tool: HSK-A63 2 x 40 places

x-travel:630 mm y-travel:630 mm z-travel:500 mm number of spindle speeds:0 - 15000 spindle motor:32 kW size of pallet:500 x 500 mm b-axis:36000 x 0,001 ° no. of workpieces in the magazine:61 Stück tool taper:HSK 63 weight of the machine ca.:15 t Double-Spindle Mechanical processing cylinder head VR6

x-travel:800 mm y-travel:840 mm z-travel:865 mm total power requirement:24 kW weight of the machine ca.:15,5 t dimensions of the machine ca.:4 x 3 m 5 axes, 1 spindle A axis -30TO + 210 DEG B axis 360 x 0.001 Axis speed: X= 65 mm/min; Y= 55mm/min; Z= 60mm/min Spindle: 29 KW max. spindle speed = 1200 rpm max. torque = 34.6 Nm Tools: HSK-A63 87 places in the magazine

x-travel:800 mm y-travel:840 mm z-travel:865 mm control:Siemens 840 D spindle speeds::10.000 rpm spindle drive motor:20 kW weight of the machine ca.:16 t dimensions of the machine ca.:4 x 3 m 4 axes, 1 spindle A axis 360 x 0.001 Axis speeds: X= 65 mm/min; Y= 55mm/min; Z= 60mm/min Spindle torque = 262 Nm Spindle 20KW / 10,000 rpm Tool HSK-A100 57 places in the magazine

x-travel:1300 mm y-travel:1100 mm z-travel:10000 mm spindle turning speed range:10 - 7000 U/min spindle taper::MAS BT 50 workpiece weight max.:25 kg workpiece diameter:420 mm size of pallet:800 x 800 mm number of pallets:10 total power requirement:65 kVA weight of the machine ca.:24 t Machine with Fusion 640 CNC control for 4 axis - palette changer with magazine 10-fold - B-axis for table - 2 chip conveyor - tool changer 240 fold

x-travel:800 mm y-travel:690 mm z-travel:630 mm total power requirement:76 kW weight of the machine ca.:25,5 t b-axis:630 Rundeinheit control:Siemens 840 D workpiece weight:max . 1.100 kg spindle turning speed range:15000 U/min Boring power:30 mm plate size:630 x 630 mm Dimension:6000 x 2900 x 2400 mm spindle taper::HSK 63 Documents:vorhanden

2006 Mazak FH-6800 Palletech CNC Horizontal Machining Center Pallet Size.. 24.8" x 24.8" TRAVELS X-Axis Travels... 41.3" Y-Axis Travels... 31.5" Z-Axis Travels... 34.7" Distance from Spindle Center to Top of Pallet. 3.9" - 35.4" Distance from Spindle Nose to Pallet Center. 5.9" - 40.6" WORKPIECE SIZE Maximum Table Load... 3,315 lbs. Maximum Workpiece Height. 39.4" Maximum Workpiece Diameter... 41.3" 7,000 RPM Spindle Spindle Horsepower (15 Min/Cont). 40/30 HP Spindle Torque... 868 ft/lbs Obtains Full HP 243 RPM Constant Torque Range 35 - 243 RPM Spindle RPM.. 7,000 Spindle Speed Increment.. 1 RPM Number of Ranges. 4 (2 electric, 2 mechanical - automatically shifted) Tool Clamping Force.. 4,630 ft./lbs. Spindle Cooling System... Spindle Chiller AUTOMATIC TOOL CHANGER Magazine Capacity 120 Tool-to-Tool Time 1.8 seconds Chip-to-Chip Time (Approx.).. 5 seconds  ...

SNK CMV-100/5 5-Axis CNC Horizontal Machining Center New 2016 - Installed 2017 CNC Control: yes CNC Control: Fanuc 31i-B5 Main Specifications - See Below: See Below Table Size:: 1000mm x 1000mm (39.3 x 39.3 in) Distance from Pallet surface to spindle center: 0-1,300mm (0 -51.1 in) Distance from pallet surface to spindle end (when spindle is in vertical position): 0-1,000 mm (0-39.3 in) Max Table Load: 1,500 kg / table (3,300 lbs.) Spindle:: See Below Spindle Speed: 40 to 8,000 RPM Spindle Nose Taper: CT-50V (Dual face contact type) Coolant Thru Spindle: yes Spindle motor drive: VAC 30/22 kW (40/29.5 HP) Torque N-m: 26 to 653 Nm Travels: See Below Table Longitudinal (X-Axis): 1,500 mm (59.0 in) Column transverse (y-Axis): 1,330 (52.3 in) Spindlehead vertical (Z-Axis): 1,300 mm (51.1 in) Spindlehead tilt (A-Axis): +30 to -120 deg. Table rotation (C- ...

Description: 4-axis horizontal machining center Serial number 209 Working capacity: 720 x 700 x 650 mm Working table: 500 x 500 mm Maximum table load capacity: 800 kg Spindle speed: 80-8000 Rpm Automatic pallet changer 2 pallets Pallet change time: 7 sec. Tool magazine with 120 positions Taper BT 40 Max. tool length: 320 mm Tool changeover time: 1.5 sec. Travels: Longitudinal table travel (X-axis): 720 mm Vertical travel of the spindle (Y axis): 700 mm Column longitudinal stroke (Z-axis) 650 mm Distance from the table surface to the spindle axis: 100 - 800 mm Distance from spindle to table center 150 - 800 mm. Rapid feeds: X, Y and Z axes: 36.000 mm/min B-axis: 3 sec/90°. Cutting feed rate: X, Y and Z axes: 0.1~20,000 mm/min B-axis: Not applicable for 1° table Positioning accuracy: X-, Y-, Z-axis: ± 0.001 mm B-axis (1st-360 positions): ± 2 sec. Repeatability accuracy:  ...

Description: 4-axis horizontal machining center Serial number 213 Working capacity: 720 x 700 x 650 mm Working table: 500 x 500 mm Max. table load capacity: 800 kg Spindle speed: 80-8000 Rpm Automatic pallet changer 2 pallets Pallet change time: 7 sec. Tool magazine with 120 positions Taper BT 40 Max. tool length: 320 mm Tool changeover time: 1.5 sec. Travels: Longitudinal table travel (X-axis): 720 mm Vertical travel of the spindle (Y axis): 700 mm Column longitudinal stroke (Z-axis) 650 mm Distance from the table surface to the spindle axis: 100 - 800 mm Distance from spindle to table center 150 - 800 mm. Rapid feeds: X, Y and Z axes: 36.000 mm/min B-axis: 3 sec/90°. Cutting feed rate: X, Y and Z axes: 0.1~20,000 mm/min B-axis: Not applicable for 1° table Positioning accuracy: X-, Y-, Z-axis: ± 0.001 mm B-axis (1st-360 positions): ± 2 sec. Repeatability accuracy: X-, ...

MCM Clock 600 14 pallet 500x500 CNC FANUC 16iM 15000 RPM Jfmx Supervisor centro di lavoro multipallet FMS multipallet horizontal machining center in FMS under power in our warehouse Mimu machine tools (Italy)

HORIZONTAL MACHINING CENTER NR. 2 KITAMURA HX500I WITH FATESYSTEM SHUTTLE Features: X-AXIS STROKE: 870 MM Y-AXIS STROKE: 710 MM Z-AXIS STROKE: 660 MM 4TH AXLE (ROTARY TABLE): 0.001-360 ° TABLE: 500 X 500 MM MAX PERMISSIBLE LOAD ON THE BOARD: 800 KG SPINDLE CONE: ISO50 ROTATION SPEED: 12,000 RPM GAMMA CHANGE: 2 GEAR RANGES FAST FEEDS: 50,000 MM/MIN TOOL CHANGE KITAMURA 1:100 SEATS TOOL CHANGE KITAMURA 2:50 SEATS CONTROL: FANUC 16 iM SHUTTLE FASTEM SYSTEM TO 16 STATIONS

Machining center horizontal MAKINO MAG 1 Manufacturer: Makino YEAR: 2015 Control Fanuc Clamping table surface ... 800x800mm Axis X ... 1520mm Axis Y ... 1100mm Axis Z ... 1350mm Spindle speed... 500-33000 rpm. controlled axes ... 5 cooling HSK - F80 workpiece height ... 1500mm workpiece weight ... 1300kg workpiece diameter ... 1500mm Axis A ... 110° Axis B ... 360° The machine is in good condition, possible to test under power.

Litz LH630B Double Table Horizontal Machining Center Machine is in very good condition

5-Axis Horizontal Machining Center with Pallet changer Mandelli Spark 3500X New in 2018 Siemens Sinumerik 840D control Number of pallets 2 Pallet size 1250 x 1600 mm Pallet load capacity max. 5100 kg 4th axis 0.001° NC rotary table 5th Axis NC-Tilting milling head A-Axis +80° ~ -120° X 3500mm Y 1850mm Z 1800 mm Feeds X,Y,Z up to 20000 mm/min. Rapids X,Y,Z up to 35000 mm/min. Tool taper HSK-A100 Spindle drive motor rating 46/67.7 kW Spindle speeds up to 6000 rpm. Spindle torque max. 1851 Nm 200 station tool magazines. Tool diameter max. 120 mm/425 mm Tool length max. 600 mm Tool weight max. 35 kg Coolant through the spindle 25/40/60 bar Proposal Number MH-6234

5-axis horizontal machining center Makino MCD 2016 Year of construction 2005 Fanuc 16MC + Pro 3 Controller 2-fold pallets 1,300 x 1,300 mm Pallet load per pallet max. 12,000 kg ! 4e axis B-axis 360° / 0.001° 5e axis 25° spindle holder, C-axis + /- 185° X 2,000 mm Y 1,600 mm Z 1,500 mm Spindle drive power 50 kW Spindle speeds up to 15,000 rpm. Tool holder BT50 Big Plus 99-fold automatic tool changer ATC Renishaw Touch Probe Scales on X, Y, Z, B axes Conveyor IKZ 28 bar Great condition To be visited under power Offer number MH-6265

Matsuura H.Plus-405 CNC Horizontal Machining Center CNC: Fanuc X axis: 600 mm Y axis: 600 mm Z a:xis: 600 mm 4 axis 1° index Pallet size: 500 x 500 mm KNOLL high pressure unit

Description, subject to prior sale. CNC 4-axis horizontal machining center Control: Fanuc i18-M X 450 mm Y 400 mm Z 400 mm Spindle revolution 15000 rpm 61 ATC 5 pallets 300 x 300 mm SK 40 IKZ 25-50 bar Measuring Probe Tool breakage monitoring KSS Cooling The machine is in good working condition and can be inspected working under power. Availability short-term Technical specifications, subject to error.

Description, subject to prior sale CNC 4-axis horizontal machining center Control: Fanuc/Matsuura i30 G-Tech X 500 mm Y 500 mm Z 500 mm Spindle revolutions 15000 rpm 240 ATC Pallets 300 x 300 mm Number of pallets 5 SK40 IKZ 25-50 bar Measuring Probe Tool breakage monitoring KSS Cooling Spindle hours 11000 November 2020 - tool spindle renewed January 2021 - hydraulic aggregate renewed February 2021 - ATC retrofitted August 2021 - engine/motor pallet station renewed December 2022 - tool breakage monitoring renewed October 2023 - spindle oil cooler renewed Machine is in very good working condition. It can be inspected working under power. Technical indications, subject to error.

Key data: 1000 mm, 900 mm, 1000 mm

For sale : Very nice Okuma horizontal machining center type MA-600HB. The machine is equipped with an OSP-E100M controller. The movement of the X, Y and Z axes is 1000 x 900 x 1000 mm. The machine has 2 pallets measuring 630 x 630 mm. Table indexing by 1 degree. The main engine power is 35 kW. In addition, the machine has 60 tool positions. a maximum speed of 10,000 rpm. SK-50 mounting, all tool holders are included with the machine. The maximum workpiece weight is 1200 kg. The machine weight is 26,000 kg. The machine can still be viewed under power, subject to prior sale.

Matsuura H.Plus-405 CNC Horizontal Machining Center CNC: Fanuc G-TECH 16İ X axis: 600 mm Y axis: 600 mm Z a:xis: 600 mm 4 axis 1° index Pallet size: 500 x 500 mm KNOLL high pressure unit

Matsuura H.Plus-405 CNC Horizontal Machining Center CNC: Fanuc G-TECH 30İ X axis: 600 mm Y axis: 600 mm Z a:xis: 600 mm 4 axis 1° index Pallet size: 500 x 500 mm KNOLL high pressure unit

with palletech Table size 800 x 800 mm Table NCRT Number of pallets 14 Movement x-Axis 1300 mm y-Axis 1100 mm z-Axis 1000 mm Table indexing 0,001° Number in tools in magazine 237 pieces Maximum spindle speed 35-7.000 min Tool taper DIN 69871A-50 CNC control M-plus

MSX-711-MAPPS IV CNC Control Twin pallet changer. Pallet diameter 500 mm. 2-Axis NC Rotary / Swivelling table. B-Axis 0.001° / 360°. A-Axis +30°/-120° - 0.001°. Travels : X 730 mm, Y 850 mm, Z 1100 mm. Feeds / Rapids to 50000 mm/min. Spindle taper HSK-63A. Spindle speeds to 12000 rpm. 120 station tool magazine. Coolant through the spindle. Measuring probe. Tool length measurement. Tool breakage control. etc... Low run hours - Superb condition. ; Super

X-AXIS STROKE: 840 MM Y-AXIS STROKE: 860 MM Z-AXIS STROKE: 840 MM TABLE SIZE: 630 X 630 MM TABLE CAPACITY: 1,200 KG SPINDLE POWER: 30/25 KW ROTATION SPEED: 12,000 RPM ATTACHMENT: BT 50 NASOMANDRINO/PALLET DISTANCE: 50-810 MM SPINDLE-PLANK DISTANCE: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAX. WORKPIECE HEIGHT: 1000 MM CONTROL: MSG-502 YEAR OF BUILD: 2002

OKUMA MACHINING CENTER MODEL: MX-60HB TABLE: 630X630 mm X-AXIS STROKE: 1000 mm Y-AXIS STROKE: 810 mm Z-AXIS STROKE: 800 mm TOOL WAREHOUSE: 150 SEATS CONTROL: OSP-E100M

OKUMA MACHINING CENTER MODEL: MA-400HA TABLE: 400X400 mm Nr. PALLET: 2 X-AXIS STROKE: 560 mm Y-AXIS STROKE: 610 mm Z-AXIS STROKE: 625 mm ATTACK: HSS63 TOOL WAREHOUSE: 60 SEATS CONTROL: OSP-E100M

COURSE AXIS X: 840 MM COURSE ASSE Y: 860 MM COURSE ASSE Z: 840 MM TAVOLA SIZE: 630 X 630 MM TABLE RANGE: 1,200 KG TABLE INDEX: 1ST MANDRINO POWER: 30/25 KW ROTATION SPEED: 12,000 GIRI/MIN ATTACK: BT 50 NASOMANDRINO/PALLET: 50-810 MM MANDRINO - TAVOLA: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAXIMUM HEIGHT OF THE PIECE: 1000 MM CONTROL: MSG-502 BUILT: 2002

COURSE AXIS X: 840 MM COURSE ASSE Y: 860 MM COURSE ASSE Z: 840 MM TAVOLA SIZE: 630 X 630 MM TABLE RANGE: 1,200 KG TABLE INDEX: 1ST MANDRINO POWER: 30/25 KW ROTATION SPEED: 12,000 GIRI/MIN ATTACK: BT 50 NASOMANDRINO/PALLET: 50-810 MM MANDRINO - TAVOLA: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAXIMUM HEIGHT OF THE PIECE: 1000 MM CONTROL: MSG-502 BUILT: 2002

SHW UTZ 6 Move: X = 5000 mm Y = 1300 mm Z = 1800 mm 4000 RPM 120-PIECE TOOL EXCHANGE INTERNAL COOLING OF TOOLS (IKZ) TURNING TABLE 1200 mm CONTROLLER: Heidenhain TNC 430

Longitudinal X: 2600 mm Cross Y: 700 mm Vertical Z: 700 mm Positions ATC: 12   CNC Brand: Heidenhain CNC Model: iTNC 530 X – Travel:               2.600mm Y – Travel:               700mm Z – Travel:               700mm A – Axis:                 360000° B – Axis:                 +/- 110 ° Table Length:             2.900mm Table Width:              700mm Table load:               2.150Kg Table  Ø:                 750mm Feed rate X-Axis:         40.000mm/min. Feed rate Y-Axis:&n ...

CNC controller: FANUC 31i-B Axes X-axis travel mm: 1.050 Y-axis travel mm: 850 Z-axis travel mm: 970 B-axis degrees: 0,001º Distance spindle nose - table surface mm: 100-950 Worktable Number of pallets: 2 Table dimensions mm: 630x630 Maximum workpiece size (D x H) mm: ø1.100x1.100 Max. workpiece weight kg: 1.200 APC time s: 15,5 Spindle Spindle speed rpm: 10.000 Spindle drive power kW: 30 (25% ED) Spindle torque Nm: 420 (25% ED) Tool system Tool holder: HSK-A100 Tool magazine slots: 90 Max. Tool Diameter mm: ø250 Max. Tool Length mm: 550 Tool-to-tool time s: 2,4 Chip-to-chip time s: 4,5 Equipment Electronic Handwheel Chip conveyor 3D Renishaw tool probe Rinsing gun Signal lamp High pressure pump Mist collector 4th axis RS 232 interface Internal coolant supply 4x pallets Toolholders are not included Machine running times Spindle Working: 6.026 B ...

5-Axis Horizontal Machining Centre MCM Tank 1300 5-AXIS New in 2017 Siemens 840D solution line Twin pallets 630 x 800 mm Work weight max. 1500 kg NC rotary table - 4th axis B-Axis 360° / 0.001° NC-Tilting head 5th axis A-Axis +80°/-95° / 0.001° X 1300 mm Y 1400 mm Z 1400 mm Feeds and rapids to 50000 mm/min. Spindle drive 40/52 KW Spindle speeds to 10000 rpm Tool taper ISO 50 199 tool ATC Linear scales for higher accuracies Renishaw sample Chip conveyor CTS 65 bar Beautiful machine – excellent condition Operating hours 11544 - 05/2020) Spindle Working hours 6784 (05/2021) Inspect under power Proposal Number MH-6155

Horizontal CNC machining center Manufacturer Mazak Type FH 6800 Bauajhr 1999 Control Mazatrol 640M Travel X/Y/Z 1050/800/880 80 fold tool changers SK50 2 compartment pallet changers Pallet size 630 x 630mm 1° Division Conveyor IKZ internal coolant supply Machine is geometrically in very good condition. It was regularly maintained.

Horizontal CNC machining center Manufacturer Mazak Type FH 880 Year of construction 1997 Control Mazatrol Mplus Travel X/Y/Z 1300/1100/1000 80 fold tool changers Tool holder SK50 2 compartment pallet changers Pallet size 800 x 800 controlled rotary table ( 4th axis ) Conveyor IKZ internal coolant supply 3D Radio Accelerator Machine is in a used good condition. Geometrically, the machine is very good.