horizontal machining center used for sale

Dimensions (L/W/H): 8800x2100x2100 mm Weight: 6000 kg Total power requirement: 18-36 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3300x2100x2100 mm Weight: 2000 kg Total power requirement: 16 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3800x2900x2100 mm Weight: 2500 kg Total power requirement: 28 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3800x2300x2100 mm Weight: 1900 kg Total power requirement: 13 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 7000x2300x2100 mm Weight: 3200 kg Total power requirement: 28 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2300x1250x1750 mm weight: 800 kg total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3800x2100x2100 mm Weight: 3500 kg Total power requirement: 13 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x3300x2100 mm Weight: 3000 kg Total power requirement: 18 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3300x2320x2100 mm Weight: 2000 kg Total power requirement: 14,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3200x2000x1950 mm Weight: 1500 kg Total power requirement: 5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 1000 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3800x2100x2100 mm Weight: 2900 kg Total power requirement: 19 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3300x2100x2100 mm Weight: 1500 kg Total power requirement: 14 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3300x2100x2100 mm Weight: 1500 kg Total power requirement: 20 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5800x2250x2100 mm Weight: 2900 kg Total power requirement: 24 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: OSP-P 300S X-axis: 695 mm Y-axis with stroke: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° Turning diameter: 650 mm Turning length: 1,500 mm Mount: Capto C6 Total tool positions: 80 Accessories: NC Tailstock Movable hydraulic steady rest AX 5 on NC axis Coolant system with belt flow filter hydraulic 3-jaw chuck Kitagawa BB 212-11 automatic touchsetter High-pressure cooling IKZ High Cut Pro software option (High Accuracy Package with Super Nurbs) CAS Collision Prevention System Spindle orientation main spindle, electric Multi-tool including rotation function for Y-axis Helix function Automatic main power shutdown DNC-DT interface Machining Navi M-i (milling), speed control to minimize vibrations. One-Touch IGF Chip conveyor

CHIRON FZ08 KS Magnum High Speed Plus (HSP) High-Speed Machining Center (HSP) TECHNICAL FEATURES: Year: 2006 NC Type: FANUC 18i-MB5 Number of axes: 7 X-axis travel: 450 [mm] Y-axis travel: 270 [mm] Z-axis travel: 310 [mm] X, Y and Z fast travel speed: 75000 [mm/min] Maximum diameter in bar turning spindle: 32 [mm] Maximum speed Turning spindle: 8000 [rpm] Maximum power turning spindle: 12 [kW] A-axis angular travel: 360 [°] A-axis indexing accuracy: 0.001 [°] B-axis angular travel: -20° / +115 [°] B-axis indexing accuracy: 0.001 [°] Pin Attachment: HSK40 Maximum speed Spindle: 30000 [rpm] Number of tool magazine stations: 40 Turning part by robot (6th side machining): Yes RS232 Port: Yes Installed power: 17 [kVA] Supply voltage: 400 [V] Operating hours: 9911 [h] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW p ...

The machine is in good technical condition, testing possible after prior agreement. 3 AXES, Heidenhain ITNC 530 control system.

Key data: 6195 mm, 2935 mm, 565 mm

TECHNICAL DATA: Working Range: X: 4600 mm Y: 2200 Maximum travel: X: 6195 mm Y: 2935 mm Z: 565 mm 5 axes Nesting table 01 Turret tool magazine with 18 slots 01 self-propelled tool changer 10 stops: stroke 150 mm 01 Vacuum pump: 250 m³ 01 Vacuum pump: 500 m³ 01 Laser Pointer Pen Drilling unit (6 kW): 18 spindles for vertical drilling (11+2 X-axis - 6 Y-axis) 02 Double-Sided Spindles for Horizontal Drilling – X-Axis 01 Double-Sided Spindles for Horizontal Drilling – Y-Axis 01 Saw blade unit – X-axis Electrospindle unit (13 kW): Equipped with HSK mount - liquid-cooled Software: CAMPUS V7 PLUS

Works well Machine is in Spain Standard configuration with cutting range 2500 × 1550 No. 1 Automatic CNC saw with milling unit and multi-spindle drill head, model MASTERCUT 2500 × 1550, with the following characteristics: Angle of rotation of the saw: ±90° Servo motors: Digital servo motors from YASKAWA Flywheels: Ø 800 mm made of cast iron Cleaning systems for the flywheels Saw Position Sensor Suction nozzle: Ø 150 mm Compressed air requirement: 6–7 bar Self-braking motor for the flywheels: 7.5 kW Automatic lubrication of all components Pneumatic Tensioning of Flywheels Maximum cutting length: 2500 mm Maximum cutting width: 1550 mm Maximum cutting height: 0–150 mm Minimum cutting radius (depending on the saw blade): 65 mm with 13 mm saw blade Dimensions of the saw blade: 5,450 × 13 × 0.6 mm or 5,450 × 16 × 0.8 mm  ...

The machine is in good technical condition, testing possible after prior agreement. Haidenhain 530 system.

CNC Machining Center Hedelius C 80-2300 Control: Heidenhain iTNC 530 Year of Make: 2012 Travels: X-axis 2,340 mm Y-axis 800 mm Z-axis 600 mm Clamping area: 2,900 x 750 mm Pendulum machining 2 x 945 x 800 mm Table load: approx. 2,800 kg Mount: SK 40 Tool magazine: 30 – compartment Spindle speed 30 - 8,000 rpm Accessories - Chip conveyors - Paper tape filter system - Handwheel HR410 - Machine hood - 2x LTA suction - Partition wall - Pickup magazine for angle heads

General Manufacturer: Chiron Type: DZ 12 W Magnum high speed plus Control: Siemens 840D Year of Make: 2016 Travels: X 550 mm Y 400 mm Z 400 mm Rapid traverse X/Y/Z: 75 m/min Operating hours: 14,709 h Working spindle Speed: 20,000 rpm Torque: 29 Nm Power: 24 – 36 kW Tool holder: HSK 63A Double spindle spindle spacing: 250 mm Tool changing table Dimensions L/W: 660 x 950 mm Tool/movement Tool changer: 32-fold Dimensions and weight Weight: approx. 9,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Spindle coolers IKZ high-pressure system with belt filter Knoll KF150/500 Chip conveyor Probes Renishaw Oil mist extraction Blum Laser Measurement

Vertical machining center LEADWELL V50L

Manufacturer: Mori Seiki Model NLX 2500 Y/700 Top condition Year of construction 2012 only approx. 6000 operating hours incl. 12 antr. WZ Holders + 17 Static WZ Holders Quick-change system from EWS Hollow clamping device KITAGAWA BB210A821 + KITAGAWA SS1881K21 for the main spindle Coolant system with increased pressure 5 bar Hinged belt conveyor, right ejection Integrated part catcher for main spindle I/F for bar replenishment, LNS Double foot switch with protective cover Signal light (red, yellow, green) Total Counter Workpiece counters EU Tool Holder Package SAUTER BMT60 (T32259, T32260, T32261, T32262) SKM253 MSQP Transformer 45.0 kVA 15 bar Grundfos pump incl. Hydac Filter Cantilever length for driven tools 100 mm (limited Y-axis travel) (Y, SY, SMC)

Machining center Mori Seiki M25 – FH 2/35

Vertical Machining center STAMA MC326

The machine is in good technical condition, after prior agreement it is possible to test it. Including complete renishaw probe and 4 full cnc axes kitagawa. Possibility to sell also clamps, vices, lang system.

Key data: 635 mm, 510 mm, 460 mm

Vertical CNC Machining Center Manufacturer Deckel Maho Type DMC 635V Year of manufacture 2005 Control Siemens 840D ShopMill + memory card Travel X/Y/Z 635/510/460mm Spindle speed max. 8,000 rpm Tool holder SK40 20 Compartment Tool Changer Chip conveyor Clamping area 790 x 560mm 4. Axle manufacturer Lehmann The machine is in top condition, geometry very good. Machine will be available from July 2026. For more information, I am also available at 01778957069 at any time. Whatsapp is also possible.

This DECKEL MAHO DMU 50 T was manufactured in 2002. It features a spindle mount of SK40 DIN69871, a table size of 700x500 mm, and a maximum RPM of 9000. Ideal for versatile machining tasks. Contact us for more information.

This 3-axis MICROCUT V-30 The Challenger was manufactured in 2016. Ideal for precision machining, this vertical machining center ensures reliable performance. Consider the opportunity to buy this MICROCUT V-30 The Challenger vertical machining center. Contact us for more information.

This Micromill VMC 1300 Vertical Machining center was manufactured in the year 2007. It is equipped with a Fagor control unit.

This HAAS TM 2 Vertical Machining center was manufactured in the year 2021. It is equipped with a HAAS control unit. The machine has a spindle speed of 4000 rpm.

This EMCO VMC 300 Vertical Machining Center was manufactured in the year 2003 in Austria. It is equipped with a Siemens SINUMERIK 810D control unit. The machine features a 12-position automatic tool changer, an SK40 spindle with speeds up to 5,000 rpm, and travels of 420 × 330 × 240 mm (X/Y/Z), making it suitable for precise milling, drilling, and tapping operations. For more information, contact us.

This 3-axis Hurco VMX40 vertical machining center was manufactured in 2001. Consider the opportunity to buy this Hurco VMX40 vertical machining center. Contact us for more information.

This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm.

This 3-axis KNUTH XMill 1000 TB was manufactured in 2011. It features a total power of 23.8 kW and operates on 400 volts with a frequency of 50Hz/3. Ideal for detailed vertical machining tasks. Contact us for more information.

This 3-axis AXILE V5 vertical machining center was manufactured in 2018. Consider the opportunity to buy this AXILE V5 vertical machining center. Contact us for more information.

This HURCO VMX 60 Vertical Machining center was manufactured in the year 2008. It is equipped with a MAX control unit and has 3 axis. The machine has a spindle speed of 10000 rpm.

This Mazak VTC 300 C Vertical machining centre was manufactured in the year 2004. It is equipped with a spindle and a chip conveyor. The machine is included with 30 tools.

This 4-axis Matec 30 L gantry milling machine was manufactured in 1998. Consider the opportunity to buy this Matec 30 L gantry milling machine. Contact us for more information.

This 3-axis SPINNER VC 750 was manufactured in 2013. Ideal for precision CNC milling, this machine offers robust performance and reliability. Consider the opportunity to buy this SPINNER VC 750 CNC milling machine. Contact us for more information.

This Brother TC 32B Vertical Machining Center was built in Japan in 2007. Equipped with a Brother control unit, this machine incorporates 3 + 1 axis and a rotary table. Its BT30 spindle can operate with a speed up to 12000 rpm.

This 3-axis HARDINGE Bridgeport VMC 1000 vertical machining center was manufactured in 2007. Consider the opportunity to buy this HARDINGE Bridgeport VMC 1000 vertical machining center if you are looking to get high-quality milling capabilities. Contact us for more information.

This 3-axis SPINNER MVC 1600-N was manufactured in 2016. Ideal for precision machining, this vertical machining centre ensures reliable performance and durability. Consider the opportunity to buy this SPINNER MVC 1600-N vertical machining centre. Contact us for more information.

This C.B. Ferrari B18 was manufactured in 2002. It is a vertical machining center that has been well-maintained and is ready for immediate use. Consider the opportunity to buy this C.B. Ferrari B18 vertical machining center. Contact us for more information.

This 3-axis Zayer 30KF 3000 vertical machining center was manufactured in 1997. It offers robust construction and precision for complex machining tasks. Ideal for those seeking reliable performance in a used machine. Contact us for more information.

This EUMACH SUMO 1400 Vertical Machining center was manufactured in the year 2004. It is equipped with a HEIDENHAIN 426 control unit and has 3 axis. The machine has a spindle speed of 15000 rpm, is good condition and well maintained.

This 3-axis Cincinnati Sabre vertical machining center was manufactured in 1996. If you are looking to get high-quality milling capabilities, consider the Cincinnati Sabre machine we have for sale. Contact us for more information.

This 3-axis MIKRON UM 600 vertical machining center was manufactured in 1997. If you are looking to get high-quality milling capabilities, consider the MIKRON UM 600 machine we have for sale. Contact us for more information.