horizontal machining center used for sale

pressure: 40.0 t stroke: 285 mm flat steel: 250 x 24 mm working feed: 10.0 mm/sec return speed: 10.0 mm/min work height max.: 930 mm table:: 660 x 1250 mm total power requirement: 4.0 kW motor: 400 Volt 50 Hz oil volume: 40.0 l weight: 800 kg range L-W-H: 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20.0 t stroke: 185 mm flat steel: 200 x 12 mm working feed: 10.0 mm/sec return speed: 10.0 mm/min work height max.: 930 mm table:: 480 x 1060 mm total power requirement: 2.2 kW motor: 400 Volt 50 Hz oil volume: 12.0 ltr. weight: 530 kg range L-W-H: 1150 x 480 x 1400 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending radius min.: 190 mm square edge steel: 20 x 20 mm flat steel: 100 x 7 mm round bar steel: 22,0 mm L-beam: 100 x 10 mm range L-W-H: 900 x 430 x 310 mm weight of the machine ca.: 33.0 kg. properties - For precise cold and hot bending of flat, round and square steels - Stable construction for screwing onto the workbench - Infinitely adjustable bending stop - With eccentric quick release for efficient work - Readable bending angle up to 120 ° - High repeat accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths scope of delivery - Bending plate - Stepless angle stop - Terminal block with eccentric clamp - Material stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

square edge steel: 16 x 16 mm flat steel: 100 x 5 mm L-beam: 60 x 8 mm bending radius min.: 190 mm round bar steel: 18,0 mm weight of the machine ca.: 33,0 kg. Characteristics : - For precise cold and hot bending of flat, round and square steel - Stable design for screwing on the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient work - Readable bending angle up to 120° - High repetition accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - offset block - Bending plate for round bar - offset plate - Radius bending plate R 10 / R 15 - angle stop - Clamping block with eccentric clamp - Material stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AMTEC FLOWwrap F3X-3XL50GS - Pendular Knife - Servo Version Flowwrapping machine with double servo motor for packaging wide range of products and large products. Feed table with automatic transport through carriers into the machine. Special guide module for safe product transport within the machine. The pendulum blade, driven by the servo motor, allows unlimited product lengths. Automatic stopping of the machine when no product, thus preventing empty bags. Machine stops at the set position to prevent the film from sticking to the blade. Print mark sensor included. PID temperature control. Easy maintenance. Error diagnosis and clear error display. Suitable for packaging uniform products such as biscuits, cakes, bread, pasta, pharmaceuticals, household appliances, industrial components, etc. Max. film width: 880mm, 1 oscillating knife. - Specifications: 220V, 3,6KW, 20-50 beuetel/min., ma ...

I am selling this machine. Plugged in, can be tested. We can send a video of the machine via WhatsApp. The machine is well equipped Horizontal Gear Hobbing Machine Kolomna model 5B370. YOM – 1974. Max.working diameter- 500 mm; Max. module - 20; Max.workpiece lenght- 3 000mm; Very good working condition. Main technical data: Max working diameter:500 mm; Max diam. of workpiece:900 mm; Max workpiece length:3000 mm; Max modul of workpiece, mm: -by hobbing cutter 20; -by disk cutter 25; Max tilt angle:+45; Max weight of workpiece: 4000kg; Max diam. of hobbing cutters: 300mm; Max length of hobbing cutters:400 mm; Axial feeding: 0,02-575mm/min; Radial feeding: 0,36-7,1mm/min; Overall dimensions, mm: -length: 10770; -width: 4070; -height: 2580; Weight: 27100 kg.

Volume 16300 L Material V2A Horizontal design Isolated design Cylinder length 4400 mm Cylinder height 2950 mm Width 2600 mm Surface coated inside food-safe Surface inside 2B=IIIC ground Number of feet 2 saddle feet Last Use Food

dubbel kop slijper kop kan 180° draaien om te snel te wisselen van slijpsteen

Volume 16300 L Material V2A Horizontal design Isolated design Cylinder length 4400 mm Cylinder height 2950 mm Width 2600 mm Surface coated inside food-safe Surface inside 2B=IIIC ground Number of feet 2 saddle feet Last Use Food Tank crest: Cone base 2 crane eyes Overflow pipe 150 mm Filling tube 200 mm Manhole Ø 400 mm in the tank apex 1x Ventilator 200 mm 2x CIP ball completely insulated Front: Level sensor at the top Bottom level sensor Subsoil: with forward-drawn drain pipe with flap valve 200 mm 2 saddle feet

Volume 16300 L Material V2A Isolated design Horizontal design Cylinder length 4400 mm Cylinder height 2950 mm Width 2600 mm Surface coated inside food-safe Surface inside 2B=IIIC ground Number of feet 2 saddle feet Last Use Food Description Tank crest: Cone base 2 crane eyes Overflow pipe 150 mm Filling tube 200 mm Manhole Ø 400 mm in the tank apex 1x Ventilator 200 mm 2x CIP ball completely insulated Front: Level sensor at the top Bottom level sensor Subsoil: with forward-drawn drain pipe with flap valve 200 mm 2 saddle feet

Manufacturer: WMG Model: BMT 105 PTP Year of Manufacture: 2003 Type of Machine : Horizontal Boring Machine Voltage: 400V Frequency: 50Hz Current Rating: 63A Protection Class: IP43 Control Voltage (Uc): 24V DC Machine Specifications: - Control: CNC Heidenhain TNC 124 - Table Size: 1750 mm x 2000 mm - Spindle Diameter: 105 mm - Travel (X/Y/Z/W): - X: 2500 mm - Y: 1850 mm - Z: 1400 mm - W: 700 mm Find more here - / Contact us at -

Besturing: Siemens Sinumerik ( achteraf ingebouwd) Worklength with magnetic table: 2000 mm Grindingwidth: 1250 mm Longitudinal travel X-axis (autom.): 2000 mm Cross-travel Y-axis (autom.): 1250 mm Travel Z-axis (autom.): 1200 mm Dimensions of the table: 1250 x 1250 mm Dimensions magnetic table : 1250 x 1250 mm Motorpower: 30 kW Cooling system: yes

I am selling this machine. It can be tested when connected. Very good condition. X 11,500, Y 3,150, Z 2,000, clamping M 100. The machine comes with a support column, 6 plates, a rotating table E 20, heads, etc. This is a complete workstation.

SPINDEL 115 , ISO 50 , X,Y,Z - 2000 DRO TABLE 1400 X 1600

Elb 6375 ND Grindingwidth: 375 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 375 mm Travel Z-axis (autom.): 350 mm Dimensions magnetic table : 600 x 350 mm Max dia grindingstone: 300 x 50 x 76.2 mm Spindlespeeds: 2900 rpm Motorpower: 9 kW Tension needed: 400V Weight: 3300 kg ACCESSORIES: Diamant tools Cooling system: yes

Besturing: Siemens Sinumerik (achteraf ingebouwd) Siemens-aandrijving: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1270 mm Longitudinal travel X-axis (autom.): 610 mm Cross-travel Y-axis (autom.): 1310 mm Travel Z-axis (autom.): 565 mm Dimensions of the table: 1215 x 1250 mm Dimensions magnetic table : 1250 x 500 mm Distance between table -- spindlecentre: 680 mm Spindlespeeds: 0 - 2800 rpm Motorpower: 15 kW ACCESSORIES: yes Cooling system: yes

Elb SWE 6 VA II Worklenth without magnetic table: 600 mm Grindingwidth: 400 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 400 mm Travel Z-axis (autom.): 450 mm Dimensions of the table: 1100 x 450 mm Dimensions magnetic table : 700 x 200 mm Max dia grindingstone: 300x50x76 mm Spindlespeeds: 1400 x 1800 rpm Motorpower: 5.5 kW, total 13 kW Tension needed: 400V

HUGO BECK horizontal flow wrapper type FLEXO 400 S, pass-through width: 55-400mm, pass-through height: 2-150mm, product length: from 80mm to unlimited, film roll width: 550mm half tube, roll diameter: 350mm, working height: 850mm +/- 50mm adjustable. Machine dimensions: approx. X/Y 2000mm/1450mm. Inspection possible by appointment.

Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Suitable for soft dough. Working, good conditions.

cutting diameter: 440 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 610 mm cutting capacity - flat: 440 x 500 / 30° mm cutting capacity - round: 440 /30° mm cutting capacity - square: 440 x 440 / 30° mm cutting capacity - flat: 440 x 410 /45° mm cutting capacity - round: 410 /45° mm cutting capacity - square: 410 x 410 / 45° mm cutting capacity - flat: 440 x 250 /60° mm cutting capacity - round: 320 / 60° mm cutting capacity - square: 250 x 250 / 60° mm cutting capacity - flat: 440 x 610 / 90° mm cutting capacity - round: 440 / 90° mm cutting capacity - square: 440 x 440 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 1,1 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 4,3 kW weight of the machine ca.: 1,54 t dimensions of the machine ca.: 3000 x 1200 x 2000 mm Inverter Hydraulic vice Saw blade at an angle of 3° Digital dis ...

Properties: Volume 110 L Material V2A (AISI 304) 1.4301 Horizontal design Total height 500 mm Depth 900 mm Width 400 mm Exterior Surface 2B=IIIC Surface inside 2B=IIIC Description MJ UNI-DIV In front: Threaded Socket DN 25 Manhole 100 x 160 mm oval Sewage drain DN 25 Airlock top 40 mm

Favretto MD 300 Universal Surface Grinding Machine CNC Manufacturer [manufacturer]: Favretto Type [ type]: MD 300 Control unit: DTG Plus / Siemens 840D Baujahr[construction year]: 10/2006 Table size: 3,220 mm Grinding travel length: 3,200 x 900 x 725 mm Magnetic table/plate size [magnetic table/plate size ]: 3,000 x 600 mm Longitudinal table speed: 1–40 m/min Cross table speed: 5 m/min Cross locking mechanism speed: 1–50 m/min Maximum load: 4,000 kg (without magnetic plate) Grinding wheel size: 508 x 203.2 x 100 mm Grinding wheel speed: 1,400 rpm Motor power of grinding mandrel: 22 kW Weight of the machine approx.: 17,500 kg Dimensions[machine size]: 9,400 x 3,550 x 3,000 mm Accessories: Magnetic tabletop [magnetic tabletop] coolant press with paper filter various grinding wheels [various grinding wheels] Documentation We will be happy to answer any furt ...

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING   grinding length: 1600 mm   grinding width: 900 mm   workpiece height (max) with largest wheel: 600 mm   number of processing axes (excl parallel axes): 3 TABLE (SURFACE GRINDING)   table surface (left-right): 1600 mm   table surface (front-back): 800 mm SPINDLESTOCK GRINDING SPINDLE   X-axis travel: 1700 mm   spindle revolutions (max): 1000 /min GRINDING TOOL   type of grinding tool: wheel   diameter (max): 500 mm   borehole: diameter: 203.2 mm   width: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 30 kW   mains voltage: 400 V   mains frequency: 50 Hz

: 300 kN stroke length max.: 235 mm : 200x24 mm bending capacity max. - round: 60x4,0 mm toolpiece height max.: 250 mm : 660x1250 mm work height max.: 900 mm return speed: 20 mm/sec working feed: 10 mm/sec total power requirement: 3 kW weight: 950 kg Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A horizontal boring and milling machine Scharmann is available. Spindle sleeve diameter: 120mm, travel X/Y/W: 1600mm/1600mm/600mm, speed: 1000rpm, table dimensions X/Y/Z: approx. 1200mm/1400mm, max. table load: 6000kg, column diameter: 220mm, table rotation: 360°, rapid traverse: 380mm/min, feed: 2400mm/min. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/3000mm, weight: approx. 17000kg. Dokumentation vorhanden. An on-site inspection is possible.

Control: Xpress Cube Grinding width: 600 mm Grinding length: 1,500 mm Grinding height: 500 mm Grinding wheel diameter: 400 mm Table load: 1,200 / 625 kg Spindle drive: 10 – 52 kW Spindle cone: 60 / 75 mm Speed range: 1,450 – 3,500 rpm Accessories: Belt filter system Coolant Mist Extraction Type VMN-V12 Balancing system Magnetic disk

Batch mixer with a gross volume of 300 l. (max. usable filling: approx. 200 l.), part in contact with the product in stainless steel V4A, centrifuge equipped with ploughshares, drive via geared motor with 7.3 kW (pole-switchable for 2 speeds), equipped with a cutter head with 4.0 kW (speed approx. 3,000 rpm). Incl. push-button control cabinet and base; Outlet flap manually operated. All tools in very good wear condition.

Very good surface grinding machine Table surface / working area 200 x 600 mm

Condition: used,Volume: 42,000,Shelves: Clapper bottom,Design: lying,Stand shape: feet height adjustable,Number of feet: 6,Diameter outside: 3,000,Cylindrical length: 5900,Total height: 3,650,Total width: 3,100,Total length: 6,900,Manhole / dome: in the topstock,Type plate: No,Equipment: Level indicator (without guarantee), Spray head,Outlet: available,Outlet: 65,Last use: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: Stainless steel,Bottom bearing: No,Power Interferer: No,Bottom Bearing: No,Power Interferer: No

Hemburg U2.H Motorpower: 950 W Tension needed: 3 x 380 V

sheet width: - mm plate thickness: - mm distance between columns: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

40 TON PRESS MACHINE

Bar lathe Biglia 620 YS Technical specifications Fanuc CNC Model i-HMI CNC version ASA 6 main spindle nose Main spindle power 30 Kw Main spindle chuck chuck chuck diameter 250 mm Main spindle bar passage 70 mm Turning diameter 360 mm Turning length 620 mm Number of main spindle speeds 4500 Number of Tool Turrets 1 Number of tool positions first turret 15 Number of Motorized First Turret 15 First turret X-axis travel 180 mm Y-axis travel first turret +45 -45 mm Z-axis travel first turret 620 mm Fast feeds linear axes X Y Z 30 m/min Sub-spindle yes ASA 5 spindle nose Number of sub-spindle revolutions 5000 Power against spindle 25 Kw Bar passage 50 mm Self-centering diameter 140 mm Z stroke counter-spindle 620 mm Belt chip conveyor Presetting yes Basic Information Brand Biglia Model 620 YS Year of construction 2020 Code C01011 Level Machine St ...

Mazak SQT 250 Lathe Technical specifications Mazatrol CNC Model CNC Version PC - Fusion - CNC ASA 6 main spindle nose Main spindle power 18.5 Kw Main spindle chuck chuck chuck diameter 250 mm Main spindle bar passage 66 mm Number of main spindle revolutions 4000 Turning diameter 350 mm Turning length 1000 mm Number of Tool Turrets 1 Number of fixed tool positions for the first turret 12 First turret X-axis travel 180 mm Z axis travel first turret 1000 mm Fast feeds linear axes X Y Z 30 m/min Tailstock yes Belt chip conveyor Presetting yes Basic Information Brand Mazak Model SQT 250 Year of construction 2001 Code 1E7D21 Level Machine Standard Size and Weight Length 3,030 mm Width 1700 mm Height 2,200 mm Weight 6000 Kg

bar lathe Takamaz XY 1000 Technical specifications Fanuc CNC Model CNC Version 16 ASA 5 main spindle nose Main spindle power 7.5 Kw Main spindle bar passage 42 mm Turning diameter 190 mm Turning length 395 mm Number of main spindle speeds 5000 Number of Tool Turrets 2 Number of tool positions first turret 12 Number of Motorized First Turret 12 First turret X-axis travel 162.5 mm Y-axis travel first turret + - 30 mm Z-axis travel first turret 450 mm Number of tool positions second turret 12 Number of motorized second turrets 12 Second turret X-axis stroke 160 mm Z axis travel second turret 450 mm Fast feed rates linear axes X Y Z 24 m/min Sub-spindle yes ASA 5 spindle nose Number of sub-spindle revolutions 5000 Power against spindle 5.5 Kw Z stroke sub-spindle 475 mm Model and brand bar feeder iemca Boss 545 E Belt chip conveyor Basic Informatio ...

Equipment: Heatable/coolable,Condition: used,Volume: 72,500,Design: horizontal,Stand shape: feet,Number of feet: 12,Heating/cooling (filter bar): available,Temperature control cylinder: rectangular half-tube coil,Diameter inside: 2,800,Cylindrical length: 12000,Total length: 13,100,Type plate: No,Equipment: Spray head,Remarks: 6 reinforcement rings Fe with 2 feet each (Attention: note tank diameter lower than tank feet when setting up) Manhole in the front floor,last Intended use: Brewery,Material in contact with the product: V2A 1.4301 (AISI304),Material temperature control system: V2A 1.4301

Angle system for panel dividing 4300 mm x 2200 mm Year of manufacture 2000 Ex-works not dismantled (lombardia)

The Spt model is equipped with an automatic loading system with lift table and slider  and collets  Furthermore, the machine has a pre-warehouse of plates Panel dimensions up to 4400 x 2200 mm

This Mazak QTN 250-II was manufactured in 2009. A robust horizontal turning machine, it offers reliable performance for precision machining. Ideal for those looking to enhance their machining capabilities with a proven model. Contact us for more information.

This 4-axis EMCO Maxxturn 65 lathe was manufactured in 2005. It features a Siemens 840 D control system, a 12-position turret with all driven tools, and a tool holder VDI 30. The main spindle operates up to 5000 rpm, while the counter spindle reaches 7000 rpm. It includes a Hainbuch collet chuck, parts catcher, and a chip conveyor. A great opportunity to buy this EMCO Maxxturn 65 lathe. Reach out for more information.

This Pinacho SE325 was manufactured in 2018. A reliable horizontal turning machine, it offers consistent performance for various machining tasks. Ideal for workshops seeking a dependable solution for turning operations. Contact us for more information.

This 3-axis Mazak Quick Turn NEXUS 200MS was manufactured in 2005. It features a maximum turning diameter of 380 mm, main spindle speed up to 5000 rpm, and a sub-spindle speed of 6000 rpm. The machine includes a Mazatrol 640T Nexus CNC control and has a robust design with dimensions of 2765x1780x1840 mm, weighing 5100 kg. If you are looking to get high-quality turning capabilities consider the Mazak Quick Turn NEXUS 200MS machine we have for sale. Contact us for more information.

This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It features a Mazatrol Matrix control unit, a maximum swing over bed of Ø 830 mm, and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power of 30 kW. It includes a chip conveyor and tool presetter. If you are looking to get high-quality turning capabilities, consider the Mazak QT Nexus 350 II M machine we have for sale. Contact us for more information.

This Mazak SQT 250M was manufactured in 1998. It is a horizontal turning machine, ideal for precision machining tasks. Contact us for more information about this machine.

This Feeler FTC 20 was manufactured in 1999. It features a swing over bed of 560 mm and a maximum turning diameter of 350 mm. The spindle operates at speeds up to 3500 rpm, supported by a robust 15 kW motor. Ideal for precision turning with its 8 tool stations and manual tailstock. Consider the opportunity to buy this Feeler FTC 20 horizontal turning machine. Contact us for more information about this machine.

This DMG Gildemeister CTX 320 linear was manufactured in 2006. A reliable horizontal turning machine, it offers robust performance for precision machining. Consider the opportunity to buy this DMG Gildemeister CTX 320 horizontal turning machine. Contact us for more information.

This HAAS SL-30 was manufactured in 2003. A robust horizontal turning machine featuring X/Z travel of 318/660 mm, turning diameter of 533 mm, and length of 660 mm. It includes a bar capacity of 76 mm, spindle power of 22.4 kW, and a maximum spindle speed of 3,200 rpm. Equipped with a 12-position tool turret and a semi-automatic hydraulic tailstock. Consider the opportunity to buy this HAAS SL-30 horizontal turning machine. Contact us for more information.

This DOOSAN PUMA 2100MS was manufactured in 2011. It features a 65 mm motorized bar passage and a counter-spindle, complete with accessories and an LNS bar loader. Ideal for precision horizontal turning operations. Contact us for more information about this machine.

This lathe machine was manufactured in 2015. Equipped with a D160 Hydraulic chuck and a D45mm main spindle bore, it boasts reliability and precision. Featuring a 12-piece turret head, VDI-40, and hydraulic programmable tailstock, it ensures versatile machining operations. With 42597 hours of power on and immediate availability, this HAAS ST-10 presents an opportunity for efficient production. For further details, contact us.

This SPINNER PD-CNC was manufactured in 2006. A reliable horizontal turning machine, it offers solid performance for your machining needs. Consider the opportunity to buy this SPINNER PD-CNC horizontal turning machine. Contact us for more information.