horizontal machining center used for sale

Manufacturer: FAMUP Year: 1998 Type: CNC vertical machining center Numerical control: Heidenhain 410 AC.Strokes : X 1000 mm / Y 470 to 600 mm / Z 470 to 600 mm (according to documentation) Table: 1300 x 520 mm – T-slots 5 x 18 mm (pitch 100 mm) – max. load 800 kg Spindle: ISO 40 DIN 69871 – AC Brushless – 50 to 8000 rpm – 11 kW (30 min) / 7.5 kW S1 Feeds: X/Y/Z 10000 mm/min – X/Y/Z 30000 mm/min fast tool magazine: 24 positions – max. tool diameter 94 mm – max. length 280 mm – max. weight 6 kg – changeover time 3 s Equipment: without spindle center coolant, without chip conveyor, sold without tools Dimensions: 4247 x 3105 x 3310 mm Weight: 6000 kg Lots sold as is, unchecked, without tools or tool holders.

Technical data Manufacturer: Hurco Model: VMX40 Machine Type: Vertical CNC Machining Center Year of manufacture: 12/2000 Serial Number: M442-01219120AFC Machine Number: Q-6695 Control: Hurco Ultimax Operating hours: 37,207 h Voltage: 380 V Frequency: 50 Hz Connection: 63 A Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Emergency stop available Network connection (10BASE-T) Interfaces: Port 1 / Port 2 / Coax Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation.

CNC vertical machining center for machining metal parts. Numerical control: Hurco WinMax Axes: 4 axes (including 1 rotary axis) Strokes: X 660 mm / Y 355 mm / Z 457 mm Table: 762 × 355 mm Maximum load table: 500 kg Spindle taper: ISO 40 Spindle speed: 10,000 rpm Spindle power: 11 kW Tool changer: 24 tools (RANDOM type) Equipment: 1-axis divider with tailstock

Sold with various tools and documentation. Technical Information Main training Maximum speed: 9,000 rpm Motor: AC Servo Motor 100% ED engine power: 4.96 kW Engine power at 40% ED: 6.94 kW Continuously programmable speed: 20 – 9,000 rpm Torque/power diagram Speed range: 20 – 9,000 rpm Axis drive AC servo motors for X, Y, Z axes Programmable feed rate: up to 10,000 mm/min Input Unit: 0.01 mm Fast (fast) speed: 12 m/min Measurement system X, Y, Z axis resolution: 0.001 mm Position Tolerance (Direct Measurement): 0.010 mm Work Area X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Work table Round table with swivel axis Clamping surface: Ø 700 x 500 mm T-slot spacing: 63 mm T-Slot Width: 14 H7 Centering bore: Ø 30 H7 Rotation range: 360° Table lock ...

EMCO VMC 600 – CNC Vertical Machining Center • Manufacturer: EMCO Maier Ges.m.b.H., Hallein, Austria • Model: EMCO VMC 600 • Machine Type: CNC Vertical Machining Center • Year of manufacture: 1998 • Serial No.: 06A Y05 • Factory No.: 06A 14 003 • Control: Siemens CNC control • Mains connection: 400 V, 3/PE, 50/60 Hz • Rated current: 27 A • Max. current: 41 A • Short-circuit strength: 6 kA • Operating mode: S6 – 40% Travel paths (typical VMC 600) • X-axis: approx. 600 mm • Y-axis: approx. 400 mm • Z-axis: approx. 400 mm Facilities • Closed work area with sliding doors • Vertical spindle • Tool holder with automatic tool changer • Coolant device with flexible nozzles • Chip tray in the work area • External control panel with screen and controls • Additional monitor above the controller • Pneumatic and lubr ...

Technical data Manufacturer: Hurco Model: VMX24 Machine Type: Vertical CNC Machining Center Year of Make: 2001 Machine number: H20131 Control: Hurco Ultimax Operating hours: 42,221 h Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Hand control unit (jog handwheel) Emergency stop available Interfaces: Port 1 / Port 2 / Coax / 10BASE-T Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation.

Control: Siemens 810 Main drive Number of spindles: 1 Spindle speed range: 12000 1/min Tool holder: Sk 40 Movement X-axis movement: 640 mm X-axis feed: 0-40 m/min X-axis feed force: 7000 N X-axis rapid traverse: 60 m/min X-Axis Precision: 0.027 Y-axis movement: 600 mm Y-axis feed: 0-40 m/min Y-axis feed force: 7000 N Y-axis rapid traverse: 40 m/min Y-Axis Precision: 0.024 Z-axis movement: 500 mm Z-axis feed: 0-40 m/min Z-axis feed force: 7000 N Z-axis rapid traverse: 40 m/min Workpiece Workpiece Z: 500 mm Max. table load: 600 kg Work table Tool Changer Available grooves: 30 Max. weight of tools: 7 kg Max. diameter of the tools: 140 mm

Manufacturer: VICTOR Year: 1996 Type: CNC Vertical Machining Center Numerical Control: FANUC Series O-M Strokes: X 800 mm / Y 500 mm / Z 510 mm Table: 1100 × 500 mm – max. load 600 kg Guides: Prismatic slides with Turcite-B coating Spindle: 60–6,000 rpm – BT40 / SK40 taper – 7.5 kW (continuous) / 11 kW (30 min) Tool changer: 24 tools – exchanger arm – 2.5 s tool-tool – max. tool Ø 80 mm Weight (kg): approx. 6000 Notes: Mehanite heavy construction machining centre. Good working condition.

Technical data Manufacturer: Hurco Model: VMX 24 t Type: CNC Vertical Machining Center X/Y/Z: 610 / 510 / 610 mm Table size: 760 x 510 mm Table load: 1000 kg Spindle holder: SK 40 Speed: 10 – 12,000 rpm⁻¹ Power: 7.5 kW Torque: 95 Nm Feed: up to 11,400 mm/min Rapid traverse: 35/35/30 m/min Tool Positions: 24 Max. tool weight: 7 kg Max. tool length: 300 mm Positioning Accuracy: ±0.01mm Repeatability: ±0.005 mm Coolant tank: 265 l Dimensions: 3940 x 4000 x 2715 mm Weight: approx. 4900 kg Configuration Machine bed: Cast iron Guided tours: Ball Linear Guides Tool Changer: Drum magazine Measuring system: Photoelectric Electrical connection: 400 V / 23 kVA Compressed air: 6 bar

CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders.

CNC vertical machining center for machining metal parts. Numerical control: Heidenhain TNC 426 (3D) Strokes: X 1,000 mm / Y 600 mm / Z 600 mm Table: 1,250 ×,800 mm Tool changer: 30 positions Spindle taper: SK 40 (DIN) Spindle speed: up to 15,000 rpm Spindle motor power: 18 / 15 kW IKZ / CTS: 40 bar Equipment: Chip conveyor, air blowing, closed cab

CNC vertical machining center for machining metal parts. Numerical control: Siemens Sinumerik 810D Powerline Strokes: X 640 mm / Y 600 mm / Z 500 mm Table: 850 × 600 mm Maximum table load: 600 kg Spindle taper: SK 40 (DIN 69871) Spindle speed: 1 – 8,000 rpm Fast feeds: X 70 m/min / Y 40 m/min / Z 40 m/min Tool changer: 30 positions Spindle motor power: 12 / 17 kW Energized hours: 43,000 h Operating hours: 15,000 h Note: Without tool holder

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2003 Serial number: 182.012 Machine Type: CNC Universal Machining Center Operating voltage: 3/PE AC 400 V / 50 Hz Spindle power: 14.5 kW Rated current: 85 A Connected load: 60 kVA Configuration Double station / multi-sided machining Automatic tool changer Chip conveyor / filter system Full fairing Integrated control cabinet

Manufacturer: HAAS Model: VF6 SS Year of Manufacture: 2008 Machine Type : Vertical Machining Center - Control: Haas CNC Axis Travels - X axis: 64 inches (1,625 mm) - Y axis: 32 inches (813 mm) - Z axis: 30 inches (762 mm) Spindle - Spindle speed: 12,000 RPM - Spindle taper: 40 taper (CT40 / BT40) - Spindle type: inline direct-drive, high-efficiency (HE) - Spindle motor: 30 HP Tool Changer - Type: side-mount automatic tool changer (SMTC) - Configuration: high-speed Super Speed ATC Electrical Requirements - Voltage: 360/480V - Phase: 3-phase - Frequency: 50/60 Hz - Full load: 40 amps - Largest load / short circuit: 70 amps - Interrupting capacity: 10,000 amps - Enclosure: NEMA Type 1 - indoor use only Find more here - / Contact us at -

A vertical CNC 3-axis machining center Hurco is available. Travel X/Y/Z: 610mm/510mm/610mm, table dimensions X/Y: 760mm/510mm, max. table load: 700kg, spindle interface: SK40, speed: 10000rpm, rapid traverse: 30m/min, feed rate: 15m/min. Machine dimensions X/Y/Z: approx. 3500mm/2000mm/2750mm, weight: approx. 4500kg, operating hours: 68619h. Documentation available. An on-site inspection is possible.

A CNC tube welding system Weil Technology for longitudinal seam welding is available. Tube diameter range: 76mm-600mm, Tube length range: 250mm-1550mm, Material thickness range: 0.8mm-2mm, Welding process: Laser, Max. welding output: approx. 80pieces/h. Documentation available. An on-site inspection is possible.

A vertical CNC 5-axis machining center POS is available. Travel X/Y/Z: 670mm/820mm/600mm, rotary table diameter: 800mm, max. table load: 1200kg, tool positions: 96, tool holder: HSK-63, speed: 18000rpm, A-axis: -100°/120°, C-axis: 360°, weight: approx. 20000kg, control: Heidenhain, operating hours: 22177h, spindle hours: 9601h. Including infrared probe, IKZ and Blum laser tool measurement. Documentation available. An on-site inspection is possible.

A vertical CNC 3-axis gantry machining center POS is available. Travel X/Y/Z: 2050mm/1050mm/780mm, table dimensions X/Y: 2200mm/1000mm, max. table load: 3000kg, tool holder: HSK-63, tool stations: 60, speed: 18000rpm, rapid traverse: 30m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 6500mm/4200mm/3800mm, weight: approx. 20000kg, control: Heidenhain, spindle hours: 10375h. Including infrared probe, IKZ and Blum tool measurement. Documentation available. An on-site inspection is possible.

Vertical Machining Center YCM - VMC 65A / Fanuc OM -CE marking -Control Fanuc OM -Operational condition / function video available -Travel X / Y / Z 650x410x615mm -Table dimensions 840x420mm -Speed range up to 6000rpm -Tool holder BT 40 -Tool magazine / side changer 16 compartment -Electric handwheel -Coolant device -Motor power 7.5 KW -Machine feet Dimensions: LxWxH 3.5x2.4x2.8 meters / Weight 4500Kg

Manufacturer: Weeke Model: Optimat BHC Venture 1 Year of Manufacture: 2006 Operating Hours: 20000h Electrical: - Power Supply: 400V / 50 Hz / 3-phase + N - Total Power: 18 kW - Current: 35 A - Control Voltage: 24V Find more here - / Contact us at -

Manufacturer: EMCO Model: MC 120-60 Year of Manufacture: 2008 Type of Machine : Machining Center Spindle hours: 10,459 CNC Control: Fanuc 18i-MB Tool holder: SK40 Condition: Used, fully functional Axis Travel - X axis: 1,200 mm - Y axis: 600 mm - Z axis: 500 mm - 4th axis: Yes, installed - 5th axis: No Equipment and Features - Tool magazine: 30 positions - Band filter: Yes - Chip conveyor: Yes - SK40 toolholder package included - Fully operational Lang Eco Compact 10 automation system with 10 vices included - Custom-built slatted loading rack for ergonomic loading and unloading of machine and - automation Find more here - / Contact us at -

Working field: axis x: 3200 mm, axis y: 944 mm, axis z: 110mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill holder: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 24 horizontal spindles in X, 10 vertical spindles in X line Working pressure air pressure: 6 bar Installed power: max 25 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit

Working area: X 5200 x Y 1260 mm Heading of main spindle: X 5709 mm, Y 1650 mm 8 workpiece consoles Equipment: Drilling unit with 18 spindles, 12 vertical sp?ndles, 6 horizontal spindles (4 in direction X , 2 in direction Y ) Grooving saw Milling motor 11 kW, 20000 rpm max, HSK-F 63 take-up, liquid-cooled, 5-axis controlled Tool changer with 16 positions Laterally positioned changer with 8 positions PC control

Travel X/Y/Z: 1600mm/400mm/425mm, table dimensions X/Y: 2000mm/400mm, max. table load: 350kg, tool positions: 12, tool holder: SK30, speed: 6300rpm, feed rate: 10m/min, rapid traverse: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/2300mm/2800mm, weight: approx. 5000kg, control: Siemens Sinumerik. The hoses, the Y-axis cover, and the battery (data loss) are in need of repair. An on-site inspection is possible.

A Schüco roll crimping machine for joining aluminum half-shells with polyamide insulating bars in thermally broken profiles is available. Profile throughput speed: approx. 34m/min, max. profile installation depth: 250mm, max. profile height: 400mm, max. insulating bar spacing: 300mm, machine dimensions X/Y/Z: approx. 900mm/900mm/1650mm, weight: approx. 750kg. Including infeed and outfeed. Documentation available. An on-site inspection is possible.

A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible.

GX- Performance VMCs Dr HeidenHain iTNC530 with HR 410 Handwheel Coolant system Rigid sructure and superior reliability Central lubrication Specifications Displacement X - axis 800 mm Displacement Y - axis 540 mm Displacement Z - Axis 540 mm Table length 900 mm Table width 540 mm Table load 700 Power supply X-axis 36000 mm/min. Nutrition Y-axis 36000 mm/min. Z-axis power supply 36000 mm/min. Spindle holder 40 ISO/Bt/Mk Power at the pivot 13 KW Touring - Range 8000 Rpm Tool Changer 20 Number of steered axles 3 Chip conveyor Yes Cooling system Yes Auction-ID: A1-44905-196

- Usable working area approx. 5000 x 1400 mm. - Axis C. - Tool magazine with 18 positions. - Electrospindle: power 7.50 KW, automatic tool change, for HSK F63 tool holder. - Vertical holes in the x-axis direction: 11. - Vertical holes in the y-axis direction: 11. - Horizontal holes in the x-axis direction: 1 + 1. - Horizontal holes in the y-axis direction: 1 + 1. - Edging unit with edge loader for 2 coils. - IMA numerical control. - 8 benches. - Lifting modules for heavy parts. - SIEMENS 2BL1100-2NC00-1S-Z vacuum pump, 2.35 KW motor. - Tools (10) and add-ons (3) that appear in the photographs are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-18

Model: Mori Seiki MV-653/50 (Year 2000) Travels (X/Y/Z): 1530 x 660 x 650 mm (60" x 26" x 25.6") Table Size: 1700 x 660 mm (67" x 26") Spindle Taper: CAT 50 / BT 50 Spindle Speed: 6,000 RPM (High Torque) Motor Power: 22 kW (30 HP) ATC Capacity: 30 Stations Machine Weight: 16,000 kg (35,270 lbs) Find more here - / Contact us at -

Core Technical Specifications (2001 Model)The "70" in the name typically refers to the X-axis travel (approx. 700 mm).FeatureSpecificationX-axis Travel710 mm (Standard)Y-axis Travel520 mmZ-axis Travel520 mmB-axis (Swivel)-10° to +95° (NC-controlled)C-axis (Rotary)360° (NC-controlled)Table SizeØ 700 mm x 500 mm (NC Swivel-Rotary Table)Max. Table Load350 kgSpindle Speed12,000 RPM (Standard) up to 18,000 RPMTool TaperSK 40 or HSK 63Tool Magazine30 to 64 positions

Masterwood Project 523 XL CNC machining center • Year : 2006 • Axes : X 6200 mm / Y 1660 mm / Z 175 mm • Drilling head: 40 chucks, inverter-driven• Saw unit: longitudinal incisions • Electrospindles : 2 x 8 kW ISO30 (including one with C-axis ) • Tool magazines:  2 x 8 quick positions • 12 Schmalz bars with double vacuum zone • Digital display for bar positioning and suction cups • Predisposition for vices and clamps • Side and front stops • 2 panel lifting blades • Chip collection belt • Mobile remote control • Vacuum pump: 250 m³/h • Suction : 1 mouth Ø250 mm + 1 mouth Ø120 mm (flow rate 6500 m³/h) • Power supply: 400 V / 41.7 A / 50 Hz• Weight  : 5500 kg  ...

Usable working area: X: 3248 mm Y: 1390 mm Z: 110 mm Configuration: 16-core drill head 8 kW electro-chuck – ISO30 8 kW frequency inverter Saw for longitudinal incisions Horizontal milling unit with 1 output – 2.2 kW 10-position tool magazine – ISO30 carriage edge Adapter support plate for index heads Table: Work table with bars and suction cups 2 stops per bar 6 × suction cups 114 × 140 mm – H 100 (to be confirmed) 6 × suction cups 125 × 75 mm – H 100 longitudinal (to be confirmed) Equipment: Vacuum pump 100 m³/h CN on external PC (PC included) 17\"PC TFT display and instructions in English Power supply: 400 V – 50 Hz Compliance: CE safety standards STANDARD version Dimensions (estimated): Length approx. 6,500 mm × Width approx. 4,100 mm × Height approx. 2,400 mm (to be confirmed) Weight (estimate): approx. 5,000 kg (to be confirmed) Auction-ID: A1-45443-70

Selca 4045 PDH control X-axis (longitudinal): 1,650 mm Y-axis (Transverse): 600 mm Z-axis (Vertical): 640 mm Distance between Spindle Nose and Table: 120 – 760 mm Fast Feed (X/Y/Z): 60 / 60 / 60 m/min Spindle Specifications (Built-in) The system uses a direct drive electrospindle to eliminate thermal drift and vibrations typical of belt drives Maximum Speed: 12,000 rpm Power (S1 100% / S6 40%): 25 kW / 35 kW Maximum torque (S1 / S6): 110 Nm / 160 Nm Tool connection: ISO 40 - DIN Cooling: Liquid circuit with dedicated heat exchanger. Permissible Weights and Loads The fixed table allows high loads to be handled without affecting the dynamics of the axes. Table dimensions: 1,800 x 600 mm Maximum load allowed: 4,000 kg (distributed) T-slots: 18 mm (100 mm wheelbase) Floor space approx. 5,225 x 3,400 mm Maximum Height: 2,760 mm Worktop height: 900 mm (from the ground)  ...

FEELER FV 600 A vertical machining center Base: Stabilized Meehanite cast iron X-stroke: 600 mm Y stroke: 400 mm Z stroke: 450 mm Table: 700 x 400 mm Max load: 350 kg Spindle: 8,000 - 10,000 RPM Mount: BT 40 / ISO 40 Motor: 5.5 / 7.5 kW Tool Changer (ATC): 20 Random Positions Guides: Linear recirculating ball bearings Rapid: 24 - 30 m/min CNC: Fanuc Series 0-MC Accuracy: ±0.005 mm Weight: approx. 3,200 kg Overall dimensions: 2000 x 2200 x h 2200 mm Auction-ID: A7-44885-19

Machine: BIESSE CNC machining center Table: 3060 x 1260 x 150 mm Solenoid Spindle: 12 kW, ISO30 Cone Tool changer: 10 positions Vacuum pump: 100 m³/h Consoles: 6 with 3 ATS suction cups Drilling Head: 15 Vertical + 4 Horizontal Pins X Saw: Ø125 mm Accessories: 4-position flange, bevel gearbox, flange for aggregates Equipment: chip recovery belt, Biesse WORK software, B_NEST Auction-ID: A1-45443-23

Usable working area: X: 4970 mm Y: 1390 mm Z: 110 mm Configuration: 16-core drill head Electro-chuck 8 kW – ISO30 Frequency inverter 8 kW Saw for longitudinal incisions Horizontal milling unit with 1 output – 2.2 kW 8-position tool magazine – ISO30 carriage edge Adapter support plate for index heads Table: Work table with bars and suction cups Pneumatic locking table 2 stops per bar 8 × suction cups 114 × 140 mm – H 100 (to be confirmed) 8 × suction cups 125 × 75 mm – H 100 longitudinal (to be confirmed) 8 × suction cups 120 × 50 mm – H 100 longitudinal (to be confirmed) 8 front stops + 2 additional side stops Equipment: Vacuum pump 250 m³/h CN on external PC (PC included) 17\" PC TFT displayMastercabinet Level 1 Power supply: 400 V – 50 Hz Compliance: CE safety standards version L Dimensions: Estimated height: approx. 2400 mm (to be confirmed) Auction-ID: A1 ...

BRIDGEPORT XR 760 high-performance vertical machining center Structure: Thick cast iron with wide column design X stroke: 760 mm Y stroke: 490 mm Z stroke: 520 mm Table: 900 x 500 mm Max load: 600 kg Spindle: 12,000 RPM Connection: BT 40 Motor: 13 kW (S1) / 18.5 kW (S6-25%) Tool changer (ATC): 30 positions (quick changer arm) Guides: Linear roller with high load capacity Rapid: 36 m/min (X/Y/Z) CNC: Heidenhain iTNC 530 Accuracy: ±0.005 mm (Positioning) Weight approx. 6,750 kg Overall dimensions: 2400 x 2300 x height 2,400 mm Auction-ID: A7-44885-7

Quaser MV 154 P Vertical Machining Center Corsa X 1020 ; Y 530 ; Z 540 mm Table: m{1.200 imes 500 ext{ mm}} (Max load: 500 kg) Spindle: 12,000 rpm (Direct Drive) Spindle power: 18.5 kW Tool magazine: 30 stations (Quick Arm Change) Fast feeds: 36 m/min (all axes) CNC: Fanuc 0i-MD Features: High Speed (AICC II), Advanced Look-ahead for superior surface finishes. Length (with conveyor): ~3,800 mm Width (depth): ~2,200 mm Height: ~2450 mm Machine Weight: 5.300 kg Auction-ID: A7-44885-18

Atlas machining center tubeless version X-axis stroke = 6000 mm Power supply 400V 50Hz Europower supply Anuba Group in CA Anuba Diam.13 sheet Vertical support for milling unit 0/90pn Upright position n.2 Milling unit 15HP Index HSK F63 Fixed head with 2 outlets blade holder D=220 + cutter holder - HSK 63 F Tool Holder 14 pos.side trolley HSK63 Front upright position Drill head Saw for longitudinal incisions 11 kW frequency inverter 8 suction cups 114X140MM - H 100 (to be confirmed) 12 suction cups 125x75MM - H 100 longitudinal (to be confirmed) 2 suction cups 114x140mm - H 75 for blocking. Template (to be confirmed) 3 additional vacuum devices for workpiece blocking 2 pneumatic vertical pressers supp. - 1 MVT. - 100 hours (to be confirmed) 2 horizontal pneumatic vices (to be confirmed) Positioning 10 bars + suction cups on display CE safety standards for atlas bati xl Atlas  ...

Machine: MASTERWOOD PROJECT DOORS Machining Center Year: 2001 Machining Range: X 2500 mm, Y 1360 mm, Z 100 mm (120 mm pass-through) Front Position: 2.2 kW horizontal unit, 8 kW ISO30 solenoid spindle, 8 pos. ISO30 Rear Position: 2.2 kW horizontal group, 14 inch rotating magazine. ISO30, manual tilting X/Y index head Table: belt-driven, vacuum pump 100 m³/h Belt: chip evacuation Order: Windows PC + SINCRO software Standards: EC Auction-ID: A1-45443-40

Machine: MASTERWOOD PROJECT DOORS Machining Center Year: 2001 Machining Range: X 2500 mm, Y 1360 mm, Z 100 mm (120 mm pass-through) Front Position: 2.2 kW horizontal unit, 8 kW ISO30 solenoid spindle, 8 pos. ISO30 Rear Position: 2.2 kW horizontal group, 14 inch rotating magazine. ISO30, manual tilting X/Y index head Table: belt with vacuum pump 100 m³/h Belt: chip evacuation Order: Windows PC + SINCRO software Standards: EC Auction-ID: A1-45443-39

Heidenhain TNC 426/430M control Racing and Board: X-axis (longitudinal): 1,000 mm Y-axis (Transverse): 600 mm Z-axis (Vertical): 600 mm Table surface: 1,200 x 600 mm Maximum Table Load: 800 kg Speed 10,000 rpm (belt or direct drive) Tool Mount: SK 40 / BT 40 Spindle power: approx. 9 - 13 kW (S1/S6) Torque: ~82 Nm Fast Feeds: 30 m/min (X/Y/Z) Tool magazine: 24 spaces (basket or chain configuration with exchange arm) Tool Change Time: ~1.6 - 2.5 seconds (T-to-T) Total Weight: approx. 6,500 kg Floor space approx. 3,500 x 2,400 x 2,800 mm TOOLS NOT INCLUDED Auction-ID: A7-44885-2

CNC Control: FANUC series O-M Axis strokes: X 600 mm / Y 420 mm / Z 450 mm Table: 750 × 400 mm Spindle speed: 6000 rpm Spindle power: 13 kW Spindle taper: ISO 40 Tool changer: 30 positions Included equipment: NIKKEN 4th axis divider Ø 250 mm Year: 1989 Manufacturer: SIGMA Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-267

X / Y / Z axis strokes: 1020 × 510 × 550 mm Spindle power: 11 kW Max. spindle speed: 6,000 rpm Spindle taper: BT 40 Tool magazine: 22 positions Weight (kg): approx. 6000 Year & Manufacturer: 1993 – FONG LEE Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-251

CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-203

CNC vertical machining center for machining metal parts. Numerical control: Heidenhain TNC 426 (3D) Strokes: X 1,000 mm / Y 600 mm / Z 600 mm Table: 1,250 ×,800 mm Tool changer: 30 positions Spindle taper: SK 40 (DIN) Spindle speed: up to 15,000 rpm Spindle motor power: 18 / 15 kW IKZ / CTS: 40 bar Equipment: Chip conveyor, air blowing, closed cab Auction-ID: A1-44765-243

CNC vertical machining center for machining metal parts. Numerical control: Siemens Sinumerik 810D Powerline Strokes: X 640 mm / Y 600 mm / Z 500 mm Table: 850 × 600 mm Maximum table load: 600 kg Spindle taper: SK 40 (DIN 69871) Spindle speed: 1 – 8,000 rpm Fast feeds: X 70 m/min / Y 40 m/min / Z 40 m/min Tool changer: 30 positions Spindle motor power: 12 / 17 kW Energized hours: 43,000 h Operating hours: 15,000 h Note: Without tool holder Auction-ID: A1-44765-242

Manufacturer: DMG (Deckel Maho Gildemeister) Year: 2006 Type: CNC Vertical Machining Center Numerical Control: Heidenhain TNC 530 Strokes: X 635 mm / Y 510 mm / Z 460 mm Spindle: 12,000 rpm Tool magazine: 32 positions Spindle center coolant: 20 bar Filtration: Cartridge filtration Tooling: No tooling supplied with the machine Weight (kg): approx. 6000 Notes: Multi-purpose CNC vertical machining center. Serial number included in the description. Auction-ID: A1-44765-216

Manufacturer: HERMLE Year: 1999 Type: Universal CNC machining center Numerical control: Heidenhain TNC 430 PA Axes: 5 axes (3 linear axes + 2 rotary axes in positioning) Strokes: X 800 mm / Y 500 mm / Z 500 mm Table: integrated roto-pallet table – max. load 250 kg Spindle: ISO 40 – 20 to 15,000 rpm Tool magazine: 30 tools SK40 Equipment: remote crank, external coolant, external blowingWeight: approx. 8,500 kg Notes: Robust and precise CNC universal machining center, functional machine. Auction-ID: A1-44765-224

CNC vertical machining center for machining metal parts. CNC control: Heidenhain TNC 410 Axes: 3 axes Strokes: X 1,020 mm / Y 610 mm / Z 560 mm Table: 1,400 ×,650 mm Maximum load table: 2,000 kg Spindle taper: BT 40 Spindle speed: 10,000 rpm Spindle power: 15 kW Tool changer: 40 positions High-pressure coolant: 20 bar through spindle Equipment: Chip conveyor, 2 augers, spindle cooling, closed cab, machine lighting Auction-ID: A1-44765-247