horizontal lathe used for sale

Center height: 700 mm Center width: 1800 mm Gr. Circulation Ø over bed/in offset: 1300/1740 mm Rotary Ø over support slide: 740 mm 12 spindle speeds: 3 - 135 rpm 12 feeds: 0.15 - 2 mm/rev Upper support adjustment: 350 mm electr. Connection: 380 V, 6.6 kW Weight approx.: 5.5 t Space requirement: 3800 x 1600 x 1700 mm

1 x Schaublin 102 spindle for push clamps type F38, incomplete for spare parts 1 x Schaublin nut for F38 spindle nose, in good used condition. 1 x 8 F38 Clamps Diameter:14 - 15 -16 -17 - 18 -20 - 31 - 30. In very good condition, a new clamp (diameter 15), one used (diameter 16), one with traces of storage (diameter 18). 1 x Spindel Schaublin 102, für Druckspannzangen F38, unvollständig, für Ersatzteile. 1 x Mutter für Druckspannzangen Schaublin F38. 1 x 8 Druckspannzangen F38. Durchmesser: 14 - 15 -16 -17 - 18 -20 - 31 - 30. Durchmesser 15 mm ist neu ungebraucht, Durchmesser 16 mm sehr gebraucht, Durchmesser 18 mm mit Lagerspuren.

Cycles lathe Microturn BNC 1840 Description: Sell our very well preserved cycles lathe Microturn BNC 1840 with turning length 1000mm and FAGOR 8055i control. Technical data: - Tip height 230mm - Max. turning length 1000mm - Speed max. 4500 1/min

Turning diameter 490 (over bed) mm Turning length 1500 mm Control Grundig Manual Plus Turning diameter 280 (via face slide) mm Travel - x 260 mm Bed width 350 mm Spindle holder Size 8 Spindle bore 65 mm Morse taper MK 5 Quill diameter 70 mm Quill Stroke 160 mm Drive power 12/16 (100/60% ED) kW Speed range 1 - 3000 rpm Control CNC Control Name Heidenhain Manual Plus Auction-ID: A7-45768-20

Working space: Max. swing diameter: 300 mm Max. turning diameter: 160 mm Max. turning length: 250 mm Main spindle: Speed range: 60 – 6,000 rpm Main drive power: 5.5 KW Spindle nose: A2 – 5 inches Spindle bore: 50 mm Bar work up to a diameter of max. 40 mm Tool turret: Special version: 12-speed Travels: Turret travel: x – axis: 100 mm z – axis: 290 mm Travel speed: Rapid traverse: x/z – axis: 30 m/min Feed range: 0 – 5,000 mm/min Tailstock: Tailstock travel: 364 mm Quill tip: MK 4 Quill stroke: 75 mm Auction-ID: A7-45768-100

CONTROLS   CNC controls MAZATROL 640 T NEXUS WORKING RANGE TURNING   turning diameter (max): 380 mm   bar diameter (max): 65 mm   worpiece length max.: 575 mm MAIN SPINDLE   spindle revolutions (max): 5000 /min   drive power: 26 kW COUNTER SPINDLE   spindle revolutions (max): 6000 /min   drive power: 11 kW X/Z SLIDE   Z-axis travel: 575 mm   X-axis travel: 230 mm   Y-axis travel: 585 mm   number of tool positions (total): 12   - rotation speeds (max): 4500 /min   - drive power: 5.5 kW Additional options• Kitagawa BB-08 3-jaw chuck• Kitagawa B-206 3-jaw chuck• Parts catcher• Interface for bar feeder• Tool holder package, including driven holders• Coolant pump• Chip conveyor

A conventional lead and feed screw lathe Antonio Anslemi is available. Center height: 260mm, center distance: 1500mm, swing diameter over bed/support/gap bed: 520mm/320mm/670mm, bed width: 370mm, speed: 1400rpm, tailstock quill diameter: 65mm, tailstock stroke: 240mm, machine dimensions X/Y/Z: approx. 3000mm/1200mm/1500mm, weight: approx. 2500kg. An on-site inspection is possible.

Inv. Num. : 9003 Type: SK 12 P1 Producer: TOS Created: 1961, GO 1980 Parameters: Table diameter: 1120 mm Maximum workpiece weight: 5000 kg Max. workpiece diameter: 1250 mm Max. workpiece height: 1000 mm Weight: 19500 kg Equipment: DRO

Manufacturer: INDEX Model: INDEX ABC Year of Manufacture: 1997 - With bar feeder and chip removal Electrical Specifications - Power Supply: 3-phase, 50 Hz - Rated Voltage: 400 V - Control Voltage: 24 V - Rated Current: 32 A Synchronous Spindle - Collet Clamping - Max. torque (Md max. 25%): 10 Nm - Max. speed: 4500 rpm - Max. collet diameter: 42 mm - Clamping depth at max. collet diameter: 38 mm - Spindle bore diameter: 15.5 mm - Max. ejector stroke: 36 mm - Max. clamping pressure: 65 bar Synchronous Spindle - Chuck Clamping - Max. torque (Md max. 25%): 10 Nm - Max. speed: 4000 rpm - Max. chuck diameter (external): 75 mm - Max. ejector stroke: 42 mm - Max. jaw stroke: 0.6 mm - Max. clamping pressure: 20 bar Rear Tool Carrier for Backworking Operations - Capacity: up to 5 fixed tools - Capacity driven tools: up to 3 fixed and 2 driven tools - Max. speed (driven tools): 6000 rpm  ...

Inv. Num. : 9004 Type: SK 12 Producer: TOS Created: 1962, GO 1982 Parameters: Table diameter: 1120 mm Maximum workpiece weight: 5000 kg Max. workpiece diameter: 1250 mm Max. workpiece height: 1000 mm Weight: 19500 kg

Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible.

A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible.

Chuck diameter: 315mm, turning length: 1600mm, swing over bed: 560mm, swing over cross slide: 370mm, control panel: Heidenhain. An on-site inspection is possible.

Connected load: 10kW, control: FANUC Series 0-T, machine type: slant bed lathe. With transformer, hydraulic unit and electrical cabinet with main switch. An on-site inspection is possible.

Automatic lathe Genini TBK 70 Output square 45×140 mm (approx. 10 pcs/min – 600 pcs/h, with 2 roughing tools – 1 finishing tool Max workable block 70×70 mm Min workable block 20×20 mm Max workable length 300 mm Min. working length 25 mm CE mark Net price

Chuck diameter: 400mm, turning length: 1000mm, swing over bed: 700mm, swing over cross slide: 400mm, control panel: TRAK 102. An on-site inspection is possible.

Automatic lathe Locatelli MK-CC 1200 Turning length 1200mm Automatic loading of scantling from the feeder 3 duplomatic knives floating on a template 3 top commuter knives Face drilling in material capability Modernized machine control in 2023

Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 560mm, swing over cross slide: 320mm, control panel: Heidenhain. An on-site inspection is possible.

An old Martin automatic lathe is available. Center height: 355mm, turning diameter over bed/slide: 720mm/515mm, faceplate diameter: 710mm, three-jaw chuck diameter range: 250mm-500mm, crank: 980mm, swing diameter: 1030mm, bed width: 530mm, speed: 1400rpm, quill diameter: 1150mm, max. quill travel: 280mm, max. workpiece weight: approx. 4000kg, weight: approx. 4900kg. Documentation available. An on-site inspection is possible.

Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible.

Parallel Lathe PBR type TM-30 Between points: 3000 mm Maxi Ø on bench: 620 mm Maxi Ø over saddle: 400 mm Maxi diameter in brocken bed: 860 mm Spindle diameter: Ø 105 mm Spindle speed: from 15 to 1500 RPM 3-jaws chuck Ø 315 mm Year of construction: 1987 Motor: 15 CV Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Equipped with: one 3-points fixed steady Rapid Feed non-functional Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4,5 T

A CNC flatbed lathe Optimum is available. Swing diameter over bed/slide: 280mm/170mm, center distance: 700mm, spindle bore: 27mm, speed: 4000rpm, travel X/Z: 165mm/660mm, feed X/Z: 2m/min/3m/min, tool stations: 4, quill stroke: 85mm. Machine dimensions X/Y/Z: approx. 2000mm/750mm/1550mm, weight: approx. 450kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible.

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

Three similar but not identical CNC sliding headstock automatic lathes Tornos including LNS bar loaders are available. 1) Lathe, axes: 9, spindles: 2, max. bar diameter: 10mm (one only 7mm), speed: 16000rpm, stroke: 66mm, machine dimensions X/Y/Z: approx. 1700mm/1050mm/2000mm, weight: approx. 1500kg, control: Fanuc. 2) Bar loader, bar diameter range: 1mm-12mm, loading capacity: 7mm/10mm: 36/24. Documentation available. An on-site inspection is possible. Individual sale of one lathe with associated bar loader possible by agreement.

Manufacturer: Nexturn Model: SA-20D Year of Manufacture: 2008 Machine Hours - Control ON Time: 36,985 hours - Automatic Running Time: 23,697 hours - Feed Time: 17,438 hours - Total Parts Produced: 1,188,215 Recent Maintenance & Overhauls - Sub-spindle replaced approximately 2 years ago including spindle bearings and sealing air - system retrofit - Y-axis fully overhauled in autumn 2025 (bearings and ball screw replaced) - X2-axis overhauled approximately 3 years ago Included Accessories - Loading magazine with additional channels - Various collets for main spindle and sub-spindle - Various guide bushings - Chip conveyors Find more here - / Contact us at -

Machine 1 - Manufacturer: Tornos - Type: DECO 10mm - Control: Fanuc ITA - Year of Manufacture: 2000 - Loading Magazine: LNS Tryton 112 - Electrically and mechanically overhauled: October 2018 Machine 2 - Manufacturer: Tornos - Type: DECO 10mm - Control: Fanuc ITA - Year of Manufacture: 2003 - Loading Magazine: LNS Tryton 112 Machine 3 - Manufacturer: Tornos - Type: DECO 7mm - Control: Fanuc ITA - Year of Manufacture: 1999 - Machine Number: T-63034 - Loading Magazine: LNS Tryton 112 - Electrically and mechanically overhauled: June 2019 General Condition - All machines are fully functional with no technical defects - All machines are currently running in a medical device production line Find more here - / Contact us at -

OKUMA LB15 – CNC Lathe Highlights • Model OKUMA LB15 • Tool turret with 12 tool positions Technical data • Turning length max.: approx. 500 mm • Turning diameter max.: approx. 250 mm • Tool positions: 12 • Machine dimensions: approx. 2600 x 3600 x 1800 mm • Machine weight: approx. 5000 kg • Nominal voltage: 380 V • Phases: 3 • Frequency: 50 Hz • Power consumption max.: 21 kVA Equipment • Tool turret • CNC control • Protective cladding • Chip conveyor Note • Loading must be carried out by the buyer Auction-ID: A7-45863-2

Offered is a CNC vertical turning machine - pick-up system. Chuck diameter: approx. 160mm - 200mm, swing diameter: approx. 270mm, travels X/Z: approx. 500 - 600mm/approx. 160 - 200mm, max. spindle speed: 6000rpm, tool carrier: 12-station turret, drive system: Siemens SIMODRIVE 611, hydraulic unit: available, coolant system: including pumps and filter (One Eye Ind. magnetic filter installed), hinged belt chip conveyor. Inspection is possible by appointment.

Offered is a precision lead and feed screw lathe: Center distance: approx. 1000mm, center height: 180mm, swing diameter over bed: 360mm, spindle bore: 35mm, spindle mount: D1-3 Camlock, spindle taper: MK5 (MT5), speed steps: 12 speeds, speed range: approx. 40-1800rpm, longitudinal feeds: 0.05-0.7mm/rev, cross feeds: 0.02-0.4mm/rev, metric threads: 0.4-7.0mm, inch threads (Whitworth): 4-56threads/inch. Inspection possible by appointment.

Turned grinding machine OMA COSBO 120 Working length 1200mm Two grinding units Oscillating Polishing Brushes Work after the copier

Inv. Num. : 9058 Type: SPV 40 CNC Producer: CZ. TECH Created: 2008 Parameters: Control system: SIEMENS Table diameter: 533 mm Feed length X-axis: 550 mm Feed length Z-axis: 850 mm Max. turning diameter: 850 mm Max. workpiece height: 800 mm Max. workpiece weight: 800 kg Weight: 12500 kg

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-45834-256

Parallel Lathe SCULFORT type MAXICAP 315-3000 R Between points: 3000 mm Maxi Ø on bench: Ø 635 mm Maxi Ø over saddle: Ø 470 mm Maxi diameter in brocken bed: Ø 1000 mm x Width 200 mm Spindle motor: 13 CV Spindle diameter: Ø 71 mm Rotation: from 20 to 1300 RPM Square turret GOODSHAPE 3-jaws chuck Ø 380 mm Threadings: Metric + Whitworth Tailstock: CM5 Feeds: longitudinal + transversal auto advances Equipped with: 1 lubricant pump + 1 face plate Ø 1000 mm Equipped with: 2 fixed steadies: Ø 380 mm + Ø 1000 mm Voltage: 380 V Dimensions (L x W x H): 5200 x 1600 x 1700 mm Weight: approx 5 T

Harrison M400 Lathe Type: Lathe Manufacturer: Harrison Model: M400 Year of manufacture: 1990 Center-to-center: 1524 mm Diameter at base: 406.4 mm Spindle nose: 57 mm Approx. machine weight: 2000 kg Approx. dimensions (L x W x H): 2200 x 1200 x 1350 mm Includes: 3- and 4-jaw chucks, faceplate, fixed and sliding rests, chuck guard, coolant, lightweight quick-change tool bridge Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-22

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-45833-327

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-45834-327

Automatic lathe Genini ROTOUR 100 CE Max working length 300 mm Max turning diameter round Ø 140 mm, square 100×100 mm 15hp spindle motor Shank Speed 2050-2800-4100-5600rpm 3HP Pump Motor 0.5hp grinder motor CE mark

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-45834-309

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-45833-251

VEB Heavy-Duty Industrial Lathe Type: Heavy-duty industrial lathe Manufacturer: VEB Großdrehmaschinenbau \"8. Mai\" (Germany) Year of manufacture: 1993 Distance between centers: 4000 mm Swing over bed: approx. 800 mm Swing over carriage: approx. 500 mm Spindle bore: approx. 80 mm Power supply: 3-phase, 380 V, 60 Hz Control voltage: 220 V Installed power: 13.5 kW Rated current: 28 A Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-23

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-45834-251

Graziano SAG180 Lathe Type: Lathe Manufacturer: Graziano Model: SAG180 Year of manufacture: 1987 Turning length: 1500 mm Turning Ø: 450 mm Speed range: up to 1500 rpm Engine power: 7.5 kW Electric connection: 380 V Distance between centers: up to 1500 mm, allowing work on medium-length parts Approx. machine weight: 1700 kg Approx. dimensions (L x W x H): 2800 x 1300 x 1400 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-32

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-45833-256

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-45833-309

A conventional lathe Zimmermann with some modification measures is available. Turning diameter over bed: 1000mm, turning length: 430mm, distance between centers: 1000mm, 3-support travel: 500mm/300mm/200mm, chuck diameter: 250mm. Documentation available. An on-site inspection is possible.

Circumferential diameter over bed ... 840mm Turning length ... 2750mm Max.workpiece weight ... 6000kg Circumferential diameter via support ... 530mm Spindle bore... 82mm Spindle speed ... 7-900 rpm The machine is in good condition, possible to test under power.

Vöest, E50/2000, Lining, Multifix, 15KW, Mas. No. 07351501

Year of manufacture: 1994 / overhauled: 2025 Circumferential diameter over bed ... 630mm Turning length ... 2000mm Circumferential diameter via support ... 340mm Main engine power ... 7.5kW L x W x H ... 4000 x 1400 x 1520mm Machine weight ... 2960kg The machine is in very good condition - after the general overhaul. More info on request. It is possible to visit our warehouse in Brno.

Year of manufacture: 1979 / overhauled: 2024 Circumferential diameter over bed ... 710mm Turning length... 2000mm Max. workpiece weight ... 850kg Circumferential diameter via support ... 420mm Spindle speed ... 10-1000 rpm Main engine power ... 7.5kW Machine weight ... 3000kg L x W x H ... 4000x1440x1560mm The machine is in very good condition - after the general overhaul. More info on request. Viewing is possible at our warehouse in Brno.

Year of manufacture: 1978 / overhauled: 2024 Circumferential diameter over bed... 710mm Max. workpiece length ... 4000mm Circumferential diameter via support ... 420mm Spindle speed ... 90-1000 rpm L x W x H ... 6000x1440x1560mm Machine weight ... 3500kg The machine is in very good condition - after the general overhaul. More info on request. It is possible to visit our warehouse in Brno.