horizontal lathe used for sale

grinding length: 600 mm grinding width: 300 mm magnetic clamping plate: 600x250 mm wheel diameter: 220-300 mm weight: 2200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MITSUI SEIKI HR6A CNC machining center was built in 1984 in Japan by MITSUI SEIKI KOGYO CO., LTD. The machine is designed for precision milling, threading and boring of oversized workpieces with a maximum weight of 2 tonnes. All these machining processes are performed fully automatically, thanks to the use of an automatic pallet exchange system. This system allows workpieces to be loaded and unloaded simultaneously during machining, thus increasing production efficiency and significantly reducing machine downtime. The pallets are transported by a stable cast iron saddle on bed’s hardened and ground guideways. Movement of the X,Y,Z axes is performed on hardened and ground slideways. These ensure that the geometry of the axes remains constant, even when moving to end of their travels. All moving components, in turn, have Turcite B coated bearings, which ensure low friction and high vi ...

Chevalier FSG-618M Worklength with magnetic table: 457 mm Grindingwidth: 152 mm Dimensions of the table: 460 x 150 mm Distance between table -- spindlecentre: 450 mm Max dia grindingstone: Ø 205 × 12.7 × Ø31.75 mm Spindlespeeds: 2850 rpm Motorpower: 1,5 kW Length: 1900 mm Depth: 1400 mm Height: 2130 mm Weight: 674 kg

Brand: Pieri Dimensions: 4.5 x 1.20 m Type: Motorized Rollers Geared motor: 1.5 hp (1.1 kW)

Equipment Description Used Indirect Extrusion Press • Brand / Model: SMS Hasenclever 28 / 31.5 MN McKechinstrang” • Type: Horizontal indirect extrusion system for non-ferrous billets • Drive: Mechanical main unit with hydraulic auxiliaries • Country of Origin: Germany • Current Status: Dismantled and available for dispatch • Serial No. / Year of Manufacture: [To be confirmed] 2. Key Technical Specifications Parameter Value Main Piston Force 25.07 MN Total Press Force with Coupling 31.23 MN Max Stroke 3,070 mm Working Stroke 2,825 mm Ram Speed at 28 MN 0–64 mm/sec Ram Speed at 31.5 MN 0–57 mm/sec Billet Diameter Range Ø 230–355 mm Billet Length (cold) 320–1,320 mm Receiver Heating System Resistance; max 63 kW / 375 °C Shear Force 0.64 MN Profile Ejector Force 0.31 MN Actuation Differential Cylinders Ø 280/200 3. Included Components • B ...

Horizontal stack delivery with pressing and marking device Stahl SBP 46.2 6 Serial-No. 47105/93-202516

Key data: 560 , 560 , 630

CNC controller: FS-18IMB (MAPPS 2) Axes X-axis travel mm: 560 Y-axis travel mm: 560 Z-axis travel mm: 630 Rapid traverse m/min: 50 Rotary Worktable (4th axis): FULL 4TH AXIS ROTARY TABLE Worktable Number of pallets: 3 Table dimensions mm: 400 Maximum workpiece size (D x H) mm: 560 x 800 Max. workpiece weight kg: 300 APC time s: 6 Spindle Spindle speed rpm: 14.000 Spindle drive power kW: 18.5/11 KW Spindle torque Nm: 120 Nm (10%ED) Tool system Tool holder: BT-40 Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 400 Max tool weight kg: 8 Tool-to-tool time s: 0,9 Chip-to-chip time s: 2,8 Equipment Chip conveyor Signal lamp 4th axis Ready for internal cooling (40/80 bar) RENISHAW OMP60 CE Round pallet storage Measuring system (worktable) Cooling Tank ...

Horizontal machining centre with 2-fold change table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 MFabr. No. 34 Year of construction 1988Travel range X: 500 mm, Y: 400 mm, Z: 320 mmClamping surface, table surface 500 x 400 mmTool holder ISO 40Spindle speed max. 6300 rpm. infinitely variableMain spindle drive 12 kWNet connection 380 Volt, 50 Hz, 30 kVA- Tool changer with 24 tool positions- Changing table with 2 stations- Interface for data transfer- Coolant device with chip conveyorSpace requirement L x W x

Equipment: Overpressure, Vacuum,Condition: used,Volume: 16,300,Vacuum: 1.0,Max. overpressure: 0.50,Max. permissible Operating temperature : 50,Design: horizontal,Stand shape: Calipers,Diameter inside: 1.800,Diameter outside: 2.000,Cylindrical length: 6000,Technical documents: Drawing, available,Type plate: Yes,Equipment: Crane eyelets,Outlet: available,Outlet : 100,Material in contact with the product: V2A 1.4301 (AISI304),Floor bearing: No,Current interferer: No,Floor bearing: No,Current interferer: No

Inv. Num. : 8589 Type: CWK 400D Dynamic Producer: Heckert Created: 2002 Parameters: Control system: Siemens Sinumerik 840D Work table length: 400 mm Work table width: 400 mm Maximum table load (uniform): 400 kg Spindle drive power: 19 kW Number of axes: 4 pieces Tool magazine: 120 pieces Minimum spindle speed: 50 1/min Maximum spindle speed: 15000 1/min X-axis travel: 650 mm Y-axis travel: 650 mm Travel travel Z-axis: 650 mm Cone: HSK A63 Max. tool length: 350 mm Max. tool weight: 10 kg Machine height: 2600 mm Machine length: 8500 mm Machine width: 4500 mm Machine weight: 12000 kg Equipment: 2 pallets 4th axis – rotary table Chip conveyor KNOLL 450 K – 1/250 Emulsion Filtration KNOLL 210/1350 Oil mist extraction

spindle diameter: 225 mm x-travel: 8000 mm y-travel: 5600 mm z-travel: 2100 mm w-axis: 1400 mm spindle turning speed - stepless: 0-650 U/min spindle taper ISO: 60 feed stepless: 5 - 3000 mm/min rapid traverse: 5 m/min weight of the machine ca.: 150 t dimensions of the machine ca.: 12 x 5 x 8 m total power requirement: 120 kW Ram type horizontal boring machine was reconditioned and modernized in 2006, original yom was 1972. Control Siemens 840 C. Machine will come with tools and a vertical milling head. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production li ...

in excellent condition Horizontal band saw machine AMADA CRH-300S manufacturer AMADA year of manufacture: 1975 Technical data Material: square 300x 300 mm Material: square 300 x 300 mm Max. material: round Ø 300 mm Max. machine load: 1200 kg Speed ​​27 - 95 m/min, infinitely adjustable Bimetal saw blade: 27 x 0.95 x 3660 mm single-sided receiving table: 0 - 400 mm Hydraulic rack and pinion vice for stack cutting saw band motor: 2.2 kW hydraulic pump motor: 0.75 kW Machine weight approx. 1.3 t Machine dimensions approx. 1625 x 1259 x 1200 m

spindle diameter: 205 mm x-travel: 10000 mm y-travel: 2500 mm w-axis: 500 mm spindle travel: 1250 mm Control: Heidenhain type: TNC 355 spindle taper ISO: 50 transmission ratio: 2 feed - independent: 0-3000 mm spindle motor: 37 kW total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: 14,1x3,2x5,6 m optionally with plate field The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to you ...

cutting diameter: 650 mm saw band length: . mm cutting width: 1000 mm Cutting height: 650 mm weight of the machine ca.: 6,4 t dimensions of the machine ca.: m Cutting speeds: 16–170 m/min Working area: approximately 670 mm Material support height: 700 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution  ...

max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 Control: weight of the machine ca.: 10.000 kg dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We are offering for sale a Haas SL-30BHE with a Iemca Barfeeder Haas SL-30BHE - Voltage: 360–480 - Phase: 3 - Frequency (Hz): 50/60 - Full Load Current: 40 Amps - Largest Load: 70 Amps - 3400 rpm Ø102mm bore - Hainbuch SK80 - USB - Conveyor - Toolsetter - Rigid tapping - 12 x VDI40 turret - Partcatcher Iemca Bar Feeder - Model: KID 80 - Year of Manufacture: 2008 - Weight Capacity: 500 Kg - Rated Voltage: 400 V - Phase: 3 ~ - Frequency: 50 Hz - Rated Current (Ie): 3.5 A - Short-circuit Capacity (Icn): 5 kA Find more here - / Contact us at -

Manufacturer: Haas Model: ST-30 Year of Manufacture: 2011 Voltage: 360–480 V Phase: 3 Frequency (Hertz): 50/60 Hz Full Load Current: 40 Amps Largest Load Current: 70 Amps Short Circuit Interrupting Capacity: 10,000 Amps Certification: CE 3400 rpm Ø75mm bore 10" chuck Livetool og C axis Toolsetter Conveyor 12 x VDI40 turret Tailstock Find more here - / Contact us at -

Height=2 m, Overall length= 1.05 m, Overall width= 4.76 m, Net weight= 750 kg,

Key data: 800 mm

Technical details are on picture. Parts shown by hand not come.

pressure: 40.0 t stroke: 285 mm flat steel: 250 x 24 mm working feed: 10.0 mm/sec return speed: 10.0 mm/min work height max.: 930 mm table:: 660 x 1250 mm total power requirement: 4.0 kW motor: 400 Volt 50 Hz oil volume: 40.0 l weight: 800 kg range L-W-H: 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20.0 t stroke: 185 mm flat steel: 200 x 12 mm working feed: 10.0 mm/sec return speed: 10.0 mm/min work height max.: 930 mm table:: 480 x 1060 mm total power requirement: 2.2 kW motor: 400 Volt 50 Hz oil volume: 12.0 ltr. weight: 530 kg range L-W-H: 1150 x 480 x 1400 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending radius min.: 190 mm square edge steel: 20 x 20 mm flat steel: 100 x 7 mm round bar steel: 22,0 mm L-beam: 100 x 10 mm range L-W-H: 900 x 430 x 310 mm weight of the machine ca.: 33.0 kg. properties - For precise cold and hot bending of flat, round and square steels - Stable construction for screwing onto the workbench - Infinitely adjustable bending stop - With eccentric quick release for efficient work - Readable bending angle up to 120 ° - High repeat accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths scope of delivery - Bending plate - Stepless angle stop - Terminal block with eccentric clamp - Material stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

square edge steel: 16 x 16 mm flat steel: 100 x 5 mm L-beam: 60 x 8 mm bending radius min.: 190 mm round bar steel: 18,0 mm weight of the machine ca.: 33,0 kg. Characteristics : - For precise cold and hot bending of flat, round and square steel - Stable design for screwing on the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient work - Readable bending angle up to 120° - High repetition accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - offset block - Bending plate for round bar - offset plate - Radius bending plate R 10 / R 15 - angle stop - Clamping block with eccentric clamp - Material stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I am selling this machine. Plugged in, can be tested. We can send a video of the machine via WhatsApp. The machine is well equipped Horizontal Gear Hobbing Machine Kolomna model 5B370. YOM – 1974. Max.working diameter- 500 mm; Max. module - 20; Max.workpiece lenght- 3 000mm; Very good working condition. Main technical data: Max working diameter:500 mm; Max diam. of workpiece:900 mm; Max workpiece length:3000 mm; Max modul of workpiece, mm: -by hobbing cutter 20; -by disk cutter 25; Max tilt angle:+45; Max weight of workpiece: 4000kg; Max diam. of hobbing cutters: 300mm; Max length of hobbing cutters:400 mm; Axial feeding: 0,02-575mm/min; Radial feeding: 0,36-7,1mm/min; Overall dimensions, mm: -length: 10770; -width: 4070; -height: 2580; Weight: 27100 kg.

AMTEC FLOWwrap F3X-3XL50GS - Pendular Knife - Servo Version Flowwrapping machine with double servo motor for packaging wide range of products and large products. Feed table with automatic transport through carriers into the machine. Special guide module for safe product transport within the machine. The pendulum blade, driven by the servo motor, allows unlimited product lengths. Automatic stopping of the machine when no product, thus preventing empty bags. Machine stops at the set position to prevent the film from sticking to the blade. Print mark sensor included. PID temperature control. Easy maintenance. Error diagnosis and clear error display. Suitable for packaging uniform products such as biscuits, cakes, bread, pasta, pharmaceuticals, household appliances, industrial components, etc. Max. film width: 880mm, 1 oscillating knife. - Specifications: 220V, 3,6KW, 20-50 beuetel/min., ma ...

dubbel kop slijper kop kan 180° draaien om te snel te wisselen van slijpsteen

Volume 16300 L Material V2A Horizontal design Isolated design Cylinder length 4400 mm Cylinder height 2950 mm Width 2600 mm Surface coated inside food-safe Surface inside 2B=IIIC ground Number of feet 2 saddle feet Last Use Food

Volume 16300 L Material V2A Horizontal design Isolated design Cylinder length 4400 mm Cylinder height 2950 mm Width 2600 mm Surface coated inside food-safe Surface inside 2B=IIIC ground Number of feet 2 saddle feet Last Use Food Tank crest: Cone base 2 crane eyes Overflow pipe 150 mm Filling tube 200 mm Manhole Ø 400 mm in the tank apex 1x Ventilator 200 mm 2x CIP ball completely insulated Front: Level sensor at the top Bottom level sensor Subsoil: with forward-drawn drain pipe with flap valve 200 mm 2 saddle feet

Volume 16300 L Material V2A Isolated design Horizontal design Cylinder length 4400 mm Cylinder height 2950 mm Width 2600 mm Surface coated inside food-safe Surface inside 2B=IIIC ground Number of feet 2 saddle feet Last Use Food Description Tank crest: Cone base 2 crane eyes Overflow pipe 150 mm Filling tube 200 mm Manhole Ø 400 mm in the tank apex 1x Ventilator 200 mm 2x CIP ball completely insulated Front: Level sensor at the top Bottom level sensor Subsoil: with forward-drawn drain pipe with flap valve 200 mm 2 saddle feet

serial number: 1296 : ja changer: ja fach documentation: ja control: Heidenhain 426 weight of the machine ca.: 6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: WMG Model: BMT 105 PTP Year of Manufacture: 2003 Type of Machine : Horizontal Boring Machine Voltage: 400V Frequency: 50Hz Current Rating: 63A Protection Class: IP43 Control Voltage (Uc): 24V DC Machine Specifications: - Control: CNC Heidenhain TNC 124 - Table Size: 1750 mm x 2000 mm - Spindle Diameter: 105 mm - Travel (X/Y/Z/W): - X: 2500 mm - Y: 1850 mm - Z: 1400 mm - W: 700 mm Find more here - / Contact us at -

Besturing: Siemens Sinumerik ( achteraf ingebouwd) Worklength with magnetic table: 2000 mm Grindingwidth: 1250 mm Longitudinal travel X-axis (autom.): 2000 mm Cross-travel Y-axis (autom.): 1250 mm Travel Z-axis (autom.): 1200 mm Dimensions of the table: 1250 x 1250 mm Dimensions magnetic table : 1250 x 1250 mm Motorpower: 30 kW Cooling system: yes

SPINDEL 115 , ISO 50 , X,Y,Z - 2000 DRO TABLE 1400 X 1600

I am selling this machine. It can be tested when connected. Very good condition. X 11,500, Y 3,150, Z 2,000, clamping M 100. The machine comes with a support column, 6 plates, a rotating table E 20, heads, etc. This is a complete workstation.

Elb 6375 ND Grindingwidth: 375 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 375 mm Travel Z-axis (autom.): 350 mm Dimensions magnetic table : 600 x 350 mm Max dia grindingstone: 300 x 50 x 76.2 mm Spindlespeeds: 2900 rpm Motorpower: 9 kW Tension needed: 400V Weight: 3300 kg ACCESSORIES: Diamant tools Cooling system: yes

Besturing: Siemens Sinumerik (achteraf ingebouwd) Siemens-aandrijving: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1270 mm Longitudinal travel X-axis (autom.): 610 mm Cross-travel Y-axis (autom.): 1310 mm Travel Z-axis (autom.): 565 mm Dimensions of the table: 1215 x 1250 mm Dimensions magnetic table : 1250 x 500 mm Distance between table -- spindlecentre: 680 mm Spindlespeeds: 0 - 2800 rpm Motorpower: 15 kW ACCESSORIES: yes Cooling system: yes

Elb SWE 6 VA II Worklenth without magnetic table: 600 mm Grindingwidth: 400 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 400 mm Travel Z-axis (autom.): 450 mm Dimensions of the table: 1100 x 450 mm Dimensions magnetic table : 700 x 200 mm Max dia grindingstone: 300x50x76 mm Spindlespeeds: 1400 x 1800 rpm Motorpower: 5.5 kW, total 13 kW Tension needed: 400V

HUGO BECK horizontal flow wrapper type FLEXO 400 S, pass-through width: 55-400mm, pass-through height: 2-150mm, product length: from 80mm to unlimited, film roll width: 550mm half tube, roll diameter: 350mm, working height: 850mm +/- 50mm adjustable. Machine dimensions: approx. X/Y 2000mm/1450mm. Inspection possible by appointment.

Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Suitable for soft dough. Working, good conditions.

cutting diameter: 440 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 610 mm cutting capacity - flat: 440 x 500 / 30° mm cutting capacity - round: 440 /30° mm cutting capacity - square: 440 x 440 / 30° mm cutting capacity - flat: 440 x 410 /45° mm cutting capacity - round: 410 /45° mm cutting capacity - square: 410 x 410 / 45° mm cutting capacity - flat: 440 x 250 /60° mm cutting capacity - round: 320 / 60° mm cutting capacity - square: 250 x 250 / 60° mm cutting capacity - flat: 440 x 610 / 90° mm cutting capacity - round: 440 / 90° mm cutting capacity - square: 440 x 440 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 1,1 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 4,3 kW weight of the machine ca.: 1,54 t dimensions of the machine ca.: 3000 x 1200 x 2000 mm Inverter Hydraulic vice Saw blade at an angle of 3° Digital dis ...

Properties: Volume 110 L Material V2A (AISI 304) 1.4301 Horizontal design Total height 500 mm Depth 900 mm Width 400 mm Exterior Surface 2B=IIIC Surface inside 2B=IIIC Description MJ UNI-DIV In front: Threaded Socket DN 25 Manhole 100 x 160 mm oval Sewage drain DN 25 Airlock top 40 mm

Favretto MD 300 Universal Surface Grinding Machine CNC Manufacturer [manufacturer]: Favretto Type [ type]: MD 300 Control unit: DTG Plus / Siemens 840D Baujahr[construction year]: 10/2006 Table size: 3,220 mm Grinding travel length: 3,200 x 900 x 725 mm Magnetic table/plate size [magnetic table/plate size ]: 3,000 x 600 mm Longitudinal table speed: 1–40 m/min Cross table speed: 5 m/min Cross locking mechanism speed: 1–50 m/min Maximum load: 4,000 kg (without magnetic plate) Grinding wheel size: 508 x 203.2 x 100 mm Grinding wheel speed: 1,400 rpm Motor power of grinding mandrel: 22 kW Weight of the machine approx.: 17,500 kg Dimensions[machine size]: 9,400 x 3,550 x 3,000 mm Accessories: Magnetic tabletop [magnetic tabletop] coolant press with paper filter various grinding wheels [various grinding wheels] Documentation We will be happy to answer any furt ...

Control Siemens 840D powerline Travel X/Y/Z 630/630/630 mm 2-fold pallet changer Speed 10000 1/min Knoll coolant system with paper belt filter Tool holder: SK40 Tool magazine 80 spaces

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING   grinding length: 1600 mm   grinding width: 900 mm   workpiece height (max) with largest wheel: 600 mm   number of processing axes (excl parallel axes): 3 TABLE (SURFACE GRINDING)   table surface (left-right): 1600 mm   table surface (front-back): 800 mm SPINDLESTOCK GRINDING SPINDLE   X-axis travel: 1700 mm   spindle revolutions (max): 1000 /min GRINDING TOOL   type of grinding tool: wheel   diameter (max): 500 mm   borehole: diameter: 203.2 mm   width: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 30 kW   mains voltage: 400 V   mains frequency: 50 Hz

A horizontal boring and milling machine Scharmann is available. Spindle sleeve diameter: 120mm, travel X/Y/W: 1600mm/1600mm/600mm, speed: 1000rpm, table dimensions X/Y/Z: approx. 1200mm/1400mm, max. table load: 6000kg, column diameter: 220mm, table rotation: 360°, rapid traverse: 380mm/min, feed: 2400mm/min. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/3000mm, weight: approx. 17000kg. Dokumentation vorhanden. An on-site inspection is possible.

: 300 kN stroke length max.: 235 mm : 200x24 mm bending capacity max. - round: 60x4,0 mm toolpiece height max.: 250 mm : 660x1250 mm work height max.: 900 mm return speed: 20 mm/sec working feed: 10 mm/sec total power requirement: 3 kW weight: 950 kg Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double Pallet Control Unit: Siemens 840D Travels :X: 560 mmY: 510 mmZ: 560 mm B: 360° Spindle speed: 18.000 rpm Table size: 400 mm x 400 mm Tool changer: 60 position Chip conveyor, Tool measurement Unit,High pressure coolant unit Can be inspected under power