127,590 used machines on RESALE, but how to find them? Machine Search
capacity 90 degrees: round: 310 mm capacity 90 degrees: square: 280 mm : 400x250 saw band length: 4020x34x1,1 mm band speed: 37 + 74 m/min table height: 940 mm total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 1,5 x 1,78 x 1,3 m ACTION PRICE ! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Sa ...
cutting diameter: 185 mm saw band length: 2.085 x 20 x 0,90 mm table height: 915 mm band speed: 35/70 m/min capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150 mm capacity 90 degrees: flat: 220 x 150 mm connected load frequency: 400 V total power requirement: 0,8 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 225 mm dimensions of saw-band: 2480 x 27 x 0,9 mm table height: 935 mm cutting speed: 45 + 90 m/min : 225 mm : 145 mm : 90 mm : 150 x 245 mm : 190 x 150 mm capacity 60 degrees: flat: 120 x 90 mm total power requirement: 1,1 kW weight of the machine ca.: 0,24 t Dimensions (LxWxH): 1380 x 580 x 930 mm - With an output of 1100 watts, the device is ideal for processing hard types of metal. - Thanks to the emergency stop and automatic switch-off, you can work safely - The low-noise electric motor ensures a quiet working atmosphere - Comfortable buttons guarantee pleasant operation of the device. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350 x 200 saw band length: 3375 x 27 x 0,9 mm band speed: 37 + 74 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,61 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 350 mm capacity 90 degrees: square: 330 mm : 500 x 310 band speed: 15 - 100 m/min table height: 844 mm dimensions of saw-band: 4250 x 34 x 1,1 mm total power requirement: 2,2 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,4 x 2,4 x 1,935 m ACTION PRICE! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all ...
capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 870 mm band speed: 18 - 110 m/min Control: CNC total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,63 t dimensions of the machine ca.: 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-a ...
capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 870 mm band speed: 18 - 110 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,63 t dimensions of the machine ca.: 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adj ...
capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: 1,1/1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m SPECIAL PRICE! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling Share of freight costs 120 EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 820x610 capacity 45 degrees: round: 550 mm capacity 45 degrees: square: 550 mm capacity 45 degrees: flat: 550x600 mm capacity 60 degrees: round: 370 mm capacity 60 degrees: square: 370 mm capacity 60 degrees: flat: 370x600/450 mm saw band length: 7260 x 41 x 1,3 mm band speed: 15 - 100 m/min table height: 800 mm total power requirement: 5,5 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new B&S positioning system”. reached. An intelligent NC contro ...
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm turning speed range:: 36 / 72 m/min dimensions of saw-band: 2950 x 25,4 x 0,9 mm weight of the machine ca.: 0,4 t Dimensions (LxWxH): 1,5 x 0,9 x 1,5 Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 310 mm capacity 90 degrees: square: 280 mm : 400x250 saw band length: 4020x34x1,1 mm band speed: 18 - 100 m/min table height: 890 mm total power requirement: 2,2 kW weight of the machine ca.: 0,99 t dimensions of the machine ca.: 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters suc ...
capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 240 mm : saw band length: 2965 x 27 x 0,9 mm table height: mm band speed: 37 / 76 m/min total power requirement: 1,0 kW weight of the machine ca.: 0,38 t dimensions of the machine ca.: 1,0 x 1,6 x 1,4 m double miter band saw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 18 - 100 m/min table height: 880 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,84 t dimensions of the machine ca.: 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to ente ...
cutting diameter: 220 mm saw band length: 2450 x 27 x 0,9 mm table height: 915 mm band speed: 35 + 70 m/min connected load frequency: 400 V capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 230 x 185 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use. ...
HORIZONTAL PLATE FREEZER CABINET, TUCAL MODEL: A.H. + COOLING COMPRESSOR IN NOISELESS CABINET, MODEL: UC Technical description: Serial number: 609 Power supply: 400 V, 3 Ph, 50 Hz Pressure: 7/10 bar Temperature: -35 / +35 ?C Refrigerant: NH3 Dimensions: 3000 x 1300 x 2300 mm Cooling compressor in noiseless cabinet, model: UC Serial number: 304 Year: 10/2015 Bitzer cooling compressor, type: OSNA8571-k Serial number: 1088702179 Dimensions of noiseless cabinet: 3000 x 1500 x 2320 mm
Used for the horizontal winding of profiles, includes control cabinet with main switch of the system, infeed roller conveyor with movable side stop, pneumatically operated lifting device, control panel with emergency stop button, winding unit with height adjustment, outfeed roller conveyor. Connected load: 2.5kW, length: 16,060mm, width: 2485mm, height: 1900mm. With documentation, on-site inspection is possible.
Inv. Num. : 8429 Type: Bluestar 6 Producer: HÜLLER-HILLE Created: 2006 Parameters: Work table length: 630 mm Work table width: 630 mm X-axis travel: 700 mm Y-axis travel: 630 mm Travel Z axis: 700 mm Max. tool diameter: 150 mm Max. tool weight: 10 kg
Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) with a corner spout. Suitable for extra-large pre-made bags. Integration of liquid and paste dosing units possible. One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(180-400)xW(100-280)mm | filling capacity: max. 3000ml | max. speed of the machine in ne ...
Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) without zipper. Suitable for extra-large pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(120-400)xW(90-280)mm | ...
Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) without zipper. Suitable for extra-large pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(120-320)xW(100-240)mm ...
Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) with zipper. Suitable for large pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(110-310)xW(90-210)mm | filling ...
Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) with zipper. Suitable for middle-sized pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-310)xW(60-180)mm | fi ...
Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) with zipper. Suitable for middle-sized pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed and accordingly 2 charging hopper are mounted. The possibility to upgrade the machine with two additional dosing units and charging hoppers does exist, either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). - Specifications: pouch sizes (min.-max.): L(110-260)xW(90-180)mm | filling capacity: max. 1600ml | max. speed of the machine in neutral: 55 ...
Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) without zipper. Suitable for middle-sized pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed and accordingly 2 charging hopper are mounted. The possibility to upgrade the machine with two additional dosing units and charging hoppers does exist, either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specif ...
Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) with zipper. Suitable for extra-large pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(120-400)xW(90-280)mm | fi ...
Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) with a corner spout. Suitable for extra-large pre-made bags. Integration of liquid and paste dosing units possible. One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(120-320)xW(100-240)mm | filling capacity: max. 2000ml | max. speed of the machine in ne ...
Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) with zipper. Suitable for extra-large pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(180-320)xW(100-240)mm | f ...
Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) with a corner spout. Suitable for big pre-made bags. Integration of liquid and paste dosing units possible. One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(180-310)xW(110-210)mm | filling capacity: max. 1600ml | max. speed of the machine in neutral: 5 ...
Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) without zipper. Suitable for large pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(110-310)xW(90-210)mm | filli ...
Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) with a spout on top. Suitable for small pre-made bag. Integration of liquid and paste dosing units possible. One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-310)xW(60-180) | filling capacity: max. 1200ml | max. speed of the machine in neutral: 50 c ...
Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) without zipper. Suitable for middle-sized pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-310)xW(60-180) | f ...
Sample system for filling wet coleslaws, sauerkraut, red cabbage into prefabricated bags including vacuuming of the bags. Rotary type volume dosing station with the special feature that the product is pressed into the bag by a piston cylinder. The filled bags are then transferred to the rotating vacuum and sealing station. 10 individual chamber vacuumers - particularly suitable for products containing high liquid - ensure an excellent vacuuming result. Thermal transfer printer and product infeed unit included. PLC controlled, operation via touch screen. Suitable for a wide range of pouches such as composite and single-layer aluminium, PE, BOPP and PP films, paper, etc. - Specifications: Filling range: 20-1000g | max. number of machine cycles in neutral: 80 cycles/min | bag dimensions: W(80-160)xL(80-240)mm | dimensions of the machine LxWxH: 2100x1400x1700mm. Please note: This is only a s ...
Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. Suitable for premade doypacks with a corner spout or a spout on top. The rotary machine has filling units equipped with two filling heads each for liquid filling and two heads each for positioning and closing the spout lids. Additional equipment: feeding lift for the spout caps, external module for CIP cleaning, air cleaning system for inner area of the machine. Relevant electronic components from Schneider and Omron, PLC and touch screen from SIEMENS, pneumatic components from AIRTAC. - Specifications: Filling range: max. 3000ml | number of filling heads: 6 | max. number of machine cycles in neutral: 26 cycles/min | current: 220/380V, 2.5kW | air pressure and consumption: 5-7bar, 0.7m? | machine dimensions LxWxH: 2600x1630x1900mm | weight: 1600kg. Please note that our new prices are o ...
Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. The rotary machine is especially used for filling all kinds of liquids such as water, juices, sauces such as soy sauce, salad dressings, tomato sauce or liquids with high viscosity such as barbecue sauces/BBQ sauces, honey, up to pasty products such as peanut butter, fruit jam, nut nougat cream etc. The filling and capping machine is equipped with six filling heads for liquid filling and with six heads each for positioning and capping the spout caps. The production process is fully automated from bag feeding, filling, cleaning the spouts, feeding the spout caps via lift and capping them, to the output of the final products. To ensure the exact filling volume, the liquid level is constantly monitored. PLC control, touch screen operating monitor (menu available in different languages e.g ...
Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. Suitable for premade doypacks with a corner spout or a spout on top. The rotary machine has two filling heads for liquid filling and two heads each for positioning and closing the spout lids. Additional equipment: feeding lift for the spout caps, external module for CIP cleaning, air cleaning system for inner area of the machine. Relevant electronic components from Schneider and Omron, PLC and touch screen from SIEMENS, pneumatic components from AIRTAC. - Specifications: Filling range: max. 500ml | number of filling heads: 2 | max. number of machine cycles in neutral: 16 cycles/min (corresponds to max. 33 bags/min) | current: 220V, 1.5kW | air pressure and consumption: 5-7bar, 0.65m? | machine dimensions LxWxH: 1990x1300x1980mm | weight: 1500kg. Please note that our new prices are ofte ...
Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. The rotary machine is especially used for filling all kinds of liquids such as water, juices, sauces such as soy sauce, salad dressings, tomato sauce or liquids with high viscosity such as barbecue sauces/BBQ sauces, honey, up to pasty products such as peanut butter, fruit jam, nut nougat cream etc. The filling and capping machine is equipped with six filling heads for liquid filling and with six heads each for positioning and capping the spout lids. The production process is fully automated from bag feeding, filling, cleaning of the nozzles, feeding the spout lids via lift and capping them, to the output of the final products. To ensure the exact filling volume, the liquid level is constantly monitored. PLC control, touch screen operating monitor (menu available in different languages ...
Premade pouches packaging/filling and closing machine, rotary operation with 8 working positions. Suitable for flat pouces and doypack style pouches with/without zipper or spout. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed, especially for zipper or spout bags. Sucking unit to open all kind of bags with thinner film material. Suitable f ...
Premade pouches packaging/filling and closing machine, rotary operation with 8 working positions. Suitable for flat pouches and doypack style pouches with/without zipper or spout. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed, especially for zipper or spout bags. Sucking unit to open all kind of bags with thinner film material. Suitable ...
Premade pouches packaging/filling and closing machine, rotary operation with 6 working positions. Suitable for flat pouches and doypack style pouches. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(200-450)xW(200-300)mm. - Techn ...
Premade pouches packaging/filling and closing machine, rotary operation with 6 working positions. Suitable for flat pouches and doypack style pouches. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(100-350)xW(100-210)mm. - Techn ...
Packaging machine equipped with a vacuum module for premade Doypack pouches, block bottom pouches, flat bottom pouches and other stand-up bag types. Compact construction with horizontal production processes. Batch/date printer and modules for specific pouch properties such as zipper, spout, gusset shape can be optionally integrated at a surcharge. Bag detectors checking the correct placement and complete opening of the e.g. Doypack pouch. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. The vacuuming takes place immediately before the bag is sealed by means of a lance which moves into the bag. The PLC controlled machine is operated via touch screen. Specifications: stainless steel version (SS304) | max. speed of the machine in neutral: 15 cycles/minute | bag width: 100-300mm | bag leng ...
Horizontal packaging machine, DUPLEX MINI VERSION, for premade doypacks, block bottom pouches, flat pouches. Duplex version with higher cycle rate. Modules for specific pouch properties such as zipper, spout, gusset shape can be integrated, optional: batch/date printer, gassing module. Bag detectors checking the correct placement and complete opening of the doypack. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. A special gripper system ensures the right position of the doypack during the filling process before the bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC-cylinder. - Specifications: stainless steel version (SS304) | max. speed of the machine in neutral: 25 cycles/minute | bag width: 100-300mm | bag length: 100-350mm | compress ...
Horizontal packaging machine, MINI VERSION, for premade doypacks, block bottom pouches, flat pouches. Modules for specific pouch properties such as zipper, spout, gusset shape can be integrated, optional: batch/date printer, gassing module. Bag detectors checking the correct placement and complete opening of the doypack. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. A special gripper system ensures the right position of the doypack during the filling process before the bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC-cylinder - Specifications: stainless steel version (SS304) | max. speed of the machine in neutral: 10 cycles/minute | bag width: 250-450mm | bag length: 250-500mm | compressed air: 0.2m?/min, 6.5bar | power: 220V, 1 phas ...
Horizontal packaging machine, MINI VERSION, for premade doypacks, block bottom pouches, flat pouches. Modules for specific pouch properties such as zipper, spout, gusset shape can be integrated, optional: batch/date printer, gassing module. Bag detectors checking the correct placement and complete opening of the doypack. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. A special gripper system ensures the right position of the doypack during the filling process before the bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC-cylinder. - Specifications: stainless steel version (SS304) | max. speed of the machine in neutral: 7 cycles/minute | bag width: 100-300mm | bag length: 100-350mm | compressed air: 0.2m?/min, 6.5bar | power: 220V, 1kW, 1 ...
Control Siemens Sinumerik 840D Travel X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 40 Wkz., SK 40 Paper filter Conveyor
OKUMA MA-50 HB CNC horizontal machining center was built in 2000 by the Japanese corporation OKUMA. The machine, designed for advanced machining of workpieces with a maximum weight of 800 kg, is distinguished by its high reliability, efficiency and precision. The machining process is performed fully automatically by means of a high-speed spindle and cutting tools taken from a 40-position magazine. What’s more, the automatic pallet exchange system allows for simultaneous loading and unloading of workpieces during the machining process, reducing machine downtime to a minimum. The MA-50 HB CNC machining center is offered with extensive equipment, including among others a rotary table and an advanced CNC control with an intuitive interface. The total weight of the machine is 21000 kg. Technical specifications of the OKUMA MA-50 HB CNC milling machine - feed in the X/Y/Z axis: 700/800/7 ...
Daewoo X: 1250 - Y: 1000 - Z: 1000 mm CNC X-axes: 1250 mm Y-axes: 1000 mm Z-axes: 1000 mm Table dimensions: 800 x 800 mm Max weight on the table: 2000 kg Admission in spindle (ISO): ISO 50 Power on the spindle: 25 kW Control: Fanuc OM Number of axes: 4 axes: X,Y,Z,B Toolstore: yes Tools: 90 positions Frequency : 20 -> 4500 rpm Number of pallets : 2x Power principal motor: 70 kva Length: 4100 mm Depth: 6850 mm Height: 3240 mm Weight: 18 ton ACCESSORIES: yes Cooling-system: yes
Qty. 1 Second-hand aluminium extrusion press line Code Aluminium HE9 6063 Mfc.: Indian manufacturer Built: 1978 PLC hydraulic – upgradation done in the year 2005! Total Force of Press: 680 MT, 750 UST Extrusion Pressure: 210 Bar Billet Diameter: 5”, 121 mm Weight per Inch of Billet: 0.76 kg/inch Scope of supply: Log heating furnace Hot shear Extrusion press Overhead puller Under-bed cooling system Run-out cooling bed Belt conveyor Stretcher Cutting machine Die oven Conveyor table Conveyor for final packaging
Max. X-axis stroke730 mm Max. Y-axis stroke730 mm Max. Z-axis stroke880 mm Max. workpiece diameter800 mm Max. workpiece height1,000 mm Max. workpiece weight700 kg Control & software SIEMENS
maximum number of results exceeded
please refine your search
