horizontal cnc used for sale

Water tanks and extinguishing water tanks USED & REFURBISHED Muensterlandtanks.de Container and tank trade Call us: 0162 1341979 Extinguishing water tank Extinguishing water tank Storage tank Cistern AHL ASL Tank Underground tank Slurry tank Polyester tank GRP tank PE tank Ferric chloride tank Iron III water tank Steel tank Molasses tank By-product tank Oil tank Pressure tank Irrigation Irrigation Riding arena irrigation ebb and flow system Sports field irrigation Diesel tank Fuel oil tank Yard filling station Tank water facility Water tank Service water extinguishing tank Buffer buffer tank Extinguishing water tank Water tank A used GRP tank in the size of 50,000 litres is offered. Volume: 50,000 Ltr. Material: GRP plastic Tank shape: cylindrical, lying in galvanized iron shells Diameter 3.0 m, L approx. 7.0 m Exits: cathedral and exits at the top Ventilation DN 100  ...

Rounds: 0 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Make Roundo R 5 S Type R 5 S Year 1989 Section modus 48 cm3 Outside diameter max. (mm) Roll = 385 mm Inside diameter max. (mm) Power 7.5 kW Max. pipe length (mm)Flatt 100 x 30 Max. angle U over Y = 200 Wall Thickness (mm)U over X = 100 Speed 0 - 7 M/min.Set with rolls Hor. & Vert. opperated  

Key data: 1180 °C

AMP VBF-60/60/100-1.5 horizontal vacuum furnace was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long workpieces with a maximum weight of 600 kg, without the risk of deformation. The AMP vacuum furnace ensures that a constant temperature of 1180°C is maintained throughout the treatment, due to the insulation inside the heating chamber in the form of a graphite mat fixed to the chamber casing by molybdenum rods with graphite composite pads. The capacious heating chamber also contains heating elements, charge holding supports and cooling nozzles through which cooling gas flows during the cooling cycle. All parameters, such as vacuum, temperature course and cooling gas pressure, are programmed in a special controller, installed in a  ...

Capacity round maximum diameter: 550 mm Angle degrees maximum: 1000 Capacity square: 5 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Make Sabi 1000 x 55 Type PBR 550 / 1000 Year 2002 Semi automatic bandsaw Capacity round max. diam.550 Angle degrees max.Cap 1000 x 550 Type machine: Vert./Hor. 45 Gr = 650 x 520 Workpiece height (mm) Speed 15 - 105 M Workpiece width (mm) Power 7.5 kW Capacity rectangle (mm) Hydr. blade tension Capacity square (mm) 5  Gr inc. blade 4.5 x 2 x 2.6 Mtr Weight 6000 Kg New Euro 80.000  

Rounds: 0 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Make Zopf 80 mm Type ZB 80 / 3 H Year 2009 profile bender / profil walze Sheet thickness (mm)Shaft = 80 mm Bending length (mm)152 / 162 / 193 Number of rolls Digital read out Accuracy Y axes 1/100 Universal set rolls  

Rounds: 188 mm Squares: 65 mm Flats: 0 mm Flats on edge: 0 mm Angles: 60 mm (1) horizontal / (2) vertical: 1   Make Roundo R2 Type R 2 Year 1995 Roll = 188 mm Outside diameter max. (mm)Shaft = 65 mm Inside diameter max. (mm) 3 rolls driven Max. pipe length (mm)Bend section 7 cm3 Max. anglePower 2.2 kW Wall Thickness (mm) Optical readout Angle 60 x 60 x 6 x 600 IPE 100 x 500 mm T 60 x 60 x 7 x 600  

Rounds: 225 mm Squares: 75 mm Flats: 0 mm Flats on edge: 0 mm Angles: 75 mm (1) horizontal / (2) vertical: 1   Make Roundo R3 Type R 3 Profile bender Year 1985 Roundo R 3 Horizontal and vertical profile bender Outside diameter max. (mm)Angle 75 x 75 x 7 Inside diameter max. (mm)IPE 140 x 700 Max. pipe length (mm)Shaft 75 mm Max. angle Rolls 225 mm Wall Thickness (mm)Cap. 14 cm3 Remote control  

Manufacturer Mori Seiki Model SH Junior Year 2001 Machine is in good condition

X : 550 mm Y : 550 mm Z : 550 mm Fanuc control unit Table size : 400 mm x 400 mm Machine is in working condition

Litz LH630B Double Table Horizontal Machining Center Machine is in very good condition

KITAMURA Mycenter H600B Horizontal Machining Center Available 2 machines. Serial No. 45030 & 45031 Control FANUC 11M X/Y/Z- 1016/813/765 Table 630x630 mm Load capacity 1200 kg Index resolution 5° Pallet station Distance table-spindle 20-833 mm Spindle taper NST 50 Spindle speed 20-3500 rpm Rapid Feed 12.000mm/min Cutting Feed 1-5.000mm/min ATC- number of tools 60 Max. Tool size/weight 150 mm/20 kg ATC- umber of tools 60 Spindle motor power 15 kW Machine Weight 14 t

Mazak PFH-4800 Horizontal Machining Center Number of magazine : 32 Tool measure probe Double pallet

X- / Y- / Z- strokes: 670/560/560 mm Pallet dimensions: 500x500 mm Max rpm : 12000 rpm Engine Power: 5.5 KW No. of tools: 60

Heckert CWK 1000 Horizontal Machining Center Control unit: SIEMENS 840D 130 magazine X : 1700 mm Y : 1100 mm Z : 1450 mm Pallet size :1000x800 4200 Rpm

Okuma MA400-HA Horizontal Machining Center X : 560 mm Y : 560 mm Z : 600 mm Table size: 400x400 mm High pressure pump

MORI SEIKI SH403 horizontal year 2000 40 bt40 tools two pallets 60 meters of rapid pallet rotation kinematics to be overhauled.

Machining center horizontal MAKINO MAG 1 Manufacturer: Makino YEAR: 2015 Control Fanuc Clamping table surface ... 800x800mm Axis X ... 1520mm Axis Y ... 1100mm Axis Z ... 1350mm Spindle speed... 500-33000 rpm. controlled axes ... 5 cooling HSK - F80 workpiece height ... 1500mm workpiece weight ... 1300kg workpiece diameter ... 1500mm Axis A ... 110° Axis B ... 360° The machine is in good condition, possible to test under power.

pressure: 80 t stroke: 285 mm flat steel: 300 x 25 mm working feed: 10,0 mm/sec return speed: 10,0 mm/min work height max.: 930 mm table:: 750 x 1425 mm total power requirement: 10,0 kW motor: 400 Volt 50 Hz weight: 1700 kg range L-W-H: 1500 x 750 x 1800 mm oil volume: 120 l Furnishing : - hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - Double foot switc The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t stroke: 285 mm flat steel: 250 x 24 mm working feed: 10,0 mm/sec return speed: 10,0 mm/min work height max.: 930 mm table:: 660 x 1250 mm total power requirement: 4,0 kW motor: 400 Volt 50 Hz weight: 1450 kg range L-W-H: 1450 x 650 x 1800 mm oil volume: 40,0 l Furnishing : - hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - Double foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t stroke: 185 mm flat steel: 200 x 12 mm working feed: 10,0 mm/sec return speed: 10,0 mm/min work height max.: 930 mm table:: 480 x 1060 mm total power requirement: 2,2 kW motor: 400 Volt 50 Hz oil volume: 12,0 ltr. weight: 530 kg range L-W-H: 1150x480x1200 mm Furnishing : - hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - Stepless adjustment of speed / pressing force - Double foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity round maximum diameter: 90 mm Angle degrees maximum: 290 Capacity square: 290 mm Workpiece height: 34 mm Workpiece width: 11 mm Capacity rectangle: 290 mm easy intuitive touchscreen panel clear Mitre cutting angle scale Double Mitre cutting L + R Working height vice 795 mm Coolant tank 35 L with bronze nozzle Capacity 90°400 ° Cutting flat 90°460 x 300 mm Capacity L 45°290 ° Cutting 45°300 x 200 Cutting speed Vario15 - 90 Circle blade size4300 x 34 x 1,1 mm Power3 kW

Rounds: 200 mm Squares: 1500 mm Flats: 2500 mm Flats on edge: 1500 mm Angles: 320 mm (1) horizontal / (2) vertical: 2   Horizontal and verticalHorizontal Shaft Ø200 mm Number of rolls3 Stroke X-Axis320 mm Capacity flat95 x 95 x R = 2500 mm Capacity Tube133 x 6 x R = 1500 Ø x mm Capacity T-Profile120 x R = 1500 mm Capacity HEA-Profile120 x R = 1500 mm

cutting diameter: 170 mm dimensions of saw-band: 2080 x 20 x 0,9 mm table height: 880 mm cutting speed: 40 + 80 m/min : 170 mm : 125 mm : 150 x 190 mm : 95 x 120 mm total power requirement: 1,1 kW weight of the machine ca.: 0,24 t Dimensions (LxWxH): 870 x 1.550 x 1.740 mm mm Miter band saw Demonstration system at a special price ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 185 mm saw band length: 2.085 x 20 x 0,90 mm table height: 915 mm band speed: 30 - 75 m/min connected load frequency: 230 V capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150 mm capacity 90 degrees: flat: 220 x 150 mm total power requirement: 2,35 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 35 + 70 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Back grinder for JUNG surface grinding machines, etc. Operating voltage: 24 volts. Magnetic plate: 110 x 75 mm. Angle adjustment: 0 - 2 degrees. Dimensions: 500 x 200 x 125 mm high. In original JUNG wooden cassette, Tools and operating instructions. Weight: approx. 25 kg. Shipping with DHL possible in consultation. Visually, good little used condition. The device can be visited in consultation and is immediately available. Please also note my other entries.

CNC flat and profile grinding machine Control: CNC SINUMERIK 840 D workpiece size 800 x 400 x 360 mm Table load: 500 kg Grinding wheel dimensions: 500 x 203 x 80 mm Spindle speed: 600 - 2000 rpm Total power requirement: 62 KW Dimensions: 6.2 x 2.8 x 2.78 m Machine weight: 7,100 kg

CNC portal machining center make PORTATEC type PBZ 30/18Year of construction 1999Table mounting and processing surface X u. Y: 3000 x 1800 mmvertical processing height Z: 300 mmSpindle mount: ISA 30Number of tools in the magazine: 8Passage between the uprights of the portal: 2080 mmSpindle speed: 1500 - 24000 rpm.External dimensions approx: 4000 x 2500 x 1800 mmDrive power: 7.5 kWWith- Portatec-Siemens control- Tool changer- Vacuum pump for table clamping- add. Pre-head clamping on the table- dedusting system- Handheld remote control device- many tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC machining center Fabr. LEADWELL type TDC 450Machine -No: LISIE0304 built in 1995X-axis: 450 mmY-axis: 350 mmZ axis: 250 mmTable mounting surface: 660 x 350 mmSpeed range milling: 10000 rpm.Tool holder: BT 30Feed range: 1 - 12000 mm / min.Rapid traverse longitudinal / transverse / vertical: 36 m / min.Total power requirement: 10 kWDimensions approx: 1700 x 2400 x 2600 mmWeight approx. 2.0 tonsWith- Fanuc controlusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC machining center for wood/plastic and composite materialMake REICHENBACHER type Vision - 1, year of construction 1999Technical specifications:Travel X:3740 mmTravel Y:1680 mmTravel Z:340 mmC axis = rotation: +/- 360°Feeds axis speed: 60 m/min.Feed web speed: 85 m/min.Z axis: 20 m/min.C axis:90°/sMilling unit speeds: 1500 - 18000 rpm.Tool holder: SK 40Distance table and spindle min./max.: 80 / 420 mmEnd mill diameter: 24 mmProfile milling cutter diameter: 100 mmTool changer slots:12Tool length max.: 200 mmTool diameter max.: 200 mmTool mass per piece / total: 6 - 50 kgTable size: 3800 x 1500 mmDrive power: 25 kWWeight approx.: 6.5 tWith- Drilling unit spindle speed 4500 rpm., 2.2 kW- Vacuum / grid table- CNC control Siemens 810 D with central unit CCU2 and software module MMC 103- Compressed air requirement 300 - 500 L/min.- Filter systemused, in good conditionPrice on request.Deli ...

Hydraulic bending machine manufactured by SANDTTechnical specifications:Table size 1200 x 600 mmWidth tool 70 mmPressure at 150 bar approx. 20 t (calculated)External dimensions L x W x H 1200 x 700 x 1300 mmWeight about 1200 kgHydraulic oil content 60 lused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Flowpack machine Connection values:400 V / 50 Hz / 3 Ph Power: 2,5 kW Machine weight: 650 kg Serial number: A / 583 Condition: fully functional Availability: as of now Machine dimension (LxWxH): approx. 3885 x 880 x 1900 mm

Stock number: UG6346 Used stainless steel Padovan (IT) filter with horizontal rotating discs. Filtration surface 20 m2. Working output in range 25000-27500 l/h. Machine had been working on fruit juice filtration / food industry. Has local control panel and has technical documentation.

Fanuc touchscreen control Nikken 4th axis Twin rotary diamond disc unit - this unit is mountednbsp;vertically with a slide-way adjustment to cater for the differing grind heights. The unit is designed to mount twin opposing discs to support dressing in both directions and provide support for the 6 thou diamond tip radius.nbsp; Longitudinal travel X-axis (autom.): 1420 mm Cross-travel Y-axis (autom.): 750 mm Dimensions of the table: 1200 x 600 mm Max dia grindingstone: 457 x 100 x 203,2 mm Spindlespeeds: 10 > 1680 rpm Motorpower: 22 kW Length: 6202 mm Depth: 3445 mm Height: 2855 mm Weight: 11,8 ton

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z560/560/660 mmPalett changer with2 PalletMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minPalett changer with2 PalletMovement X / Y / Z560/560/660 mmMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)3,1 x 4,86 x 2,84 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMaximum load (table centre)500 KgSwivelling range360 x 0,001 degreeTable size500x500 mmDrive power (100% DC)18,5 kWWeight approx.11100 Kg(For Europe) European(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissioInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mou ...

GeneralHorizontal 5-axis universal machining centre; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal850 mmCross900 mmVertical1150 mmCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDrive CNC swivel rotary table direct drive C-axis with pallet carrier Permissible load: 800 kg / 1,760 lbs C-axis: 80 min-1 direct drive A-axis: 15 min-1 single drive Rotation C axis: endlessly turning Swivel range A axis: +120°/-120° (replacement of base machKi ...

Matrix magazin Number of tools : 128 0.001 table index Reneshaw probe Fanuc control unit Table size : 500500 X Axis : 700 mm Y Axis : 630 mm Z Axis : 700 mm Double pallets

Okuma MA- 60HB Horizontal Machining Center Machine is in good condition

UMU 5000 mm slide length horizontal lathe Machine is in good working condition

Mazak Mazatrol FH-8800 Horizontal Machining Center X : 1300 mm Y : 1100 mm Z : 1000 mm Machine is in good working condition

: 330 mm : 5000 mm : 360 mm : 330 mm : 360x330 mm dimensions of saw-band: 5000x34x1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UNI-KK 0-031-500 Dimensions: Cylinder length: 9.97 m Diameter 2.50 m Total length: 10,80 m Material: Material: Steel Tank above: - with manhole Dom 600 - with 2 crane eyelets - Leak control system with leak connections complete - with ventilation Cylinder: - 2 saddle plates - with Klöpperboden

cutting diameter: 810 mm saw band length: 9500 x 54 x 1,6 mm cutting width: 1020 mm cutting capacity - flat: 1020 x 1020 mm cutting capacity - round: 1020 mm speed: 20 - 100 m/min sawing motor: 4 kW hydraulic motor: 2,2 kW total power requirement: 7,5 kW weight of the machine ca.: 5860 kg dimensions of the machine ca.: 4500 x 1700 x 2750 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

(2) Asahi Sunac THP500-6 horizontal forging press (heading machine) Year: 2008 First stroke: 24 mm Second stroke: 50 mm Kickout power: 150 kN Open height: 625 mm Closed height: 425 mm Die (WxL): 500x490 mm Punch (WxL): 250x350 mm Ram stroke: 200 mm Forging force: 5000 kN Cycling time: 6.5 sec Crank speed: 60 RPM Machine weight: 28 t

CNC Model: Fanuc CNC version: 18i-T Main spindle nose: ASA 6 Main spindle power: 22Kw Main spindle self-centering diameter: 210mm Main spindle bar passage: 65mm Turning diameter: 250mm Turning length: 500mm Number of turns main spindle: 4000 Number of Tool Towers: 1 Number of tool places first turret: 12 Number of motorized first turret: 12 X axis travel first turret: 215mm Z axis travel first turret: 510mm Rapid linear axis feeds X Y Z: 24m/min Counter-spindle: yes Spindle nose: ASA 5 Number of spins: 4000 Power against spindle: 3,7Kw Bar passage: 43mm Z stroke counterspindle : 515mm Bar loader model and brand: Iemca Master 880 Chip evacuator: carpet operated Presetting: yes Number of motorized tool holders supplied: 4 :::D IMENSIONS AND WEIGHT::: Length: 4000mm Width: 1900mm Height: 1800mm Weight:  ...

Okuma MA50HB HORIZONTAL. 10,000 revolutions. 60 tools. Renishaw and presetting. Perfect conditions