horizontal cnc used for sale

cutting diameter: 280 mm saw band length: 3400 x 27 mm cutting width: 0,9 mm capacity 45 degrees: flat: 240 x 180 mm capacity 45 degrees: round: 240 mm capacity 45 degrees: square: 210 mm driver:manufacturer: 350 x 200 capacity 90 degrees: square: 280 mm speeds: 20 - 100 m/min voltage: 400 V / 50 Hz sawing motor: 1,5 kW total power requirement: 2 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,8 x 0,9 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 460 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 460 mm cutting capacity - flat: 470 x 460 / 90° mm cutting capacity - round: 460 / 90° mm speed: 20 - 100 m/min voltage: 400 V / 50 Hz sawing motor: 4 kW total power requirement: 4,7 kW weight of the machine ca.: 1,665 t dimensions of the machine ca.: 2100 x 1300 x 850 m full-automatical band saw, Accessories: • Inverter for controllable speed, • automatical stop function after sawing and on breakage of the saw blade, • automatical saw arm lifting, • hydro-mechanical clamping of the saw blade, • material clamping to be effected from above, hydraulical vice, • switch for cutting pressure control, • coolant pump, • roller conveyor, length: 1.2 m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mm y-travel: 700 mm z-travel: 630 mm Control: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mm Table load: 400 kg number of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 406 mm gear width: 420 mm max. module: 4,3 min. module: 0,5 hob turning speeds: 49 - 246 U/min table bore diameter: 80 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2,8 x 1,6 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity round maximum diameter: 60 mm Angle degrees maximum: 300 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Capacity 90°:      0 - 60 Gr ° Cutting 90°:       300Ø Cutting flat 90°:  330 x 260 mm Capacity L 45°:    270 x 200 ° Capacity R 45°:    200 x 160 ° Cutting speed Vario:15 - 100 m/min. Circle blade size: 3320 x 27 x 0,9 mm Power:             2,2 kW Length:            2.830 mm  Width:             2.320 mm  Height:            2.300 mm  Weight:            1.105 kg 

cutting diameter: 320 mm saw band length: 4160x 34 x 1,1 mm cutting width: 450 mm : 320 mm : 320 x 320 mm capacity 90 degrees: flat: 450 x 320 mm capacity 45 degrees: round: 320 mm : 180 mm Capacity 45° rectangular: 330 x 320 mm : 160 mm : 150 mm : 150 x 150 mm capacity 60 degrees: round: 240 mm capacity 60 degrees: square: 320 x 320 mm capacity 60 degrees: flat: 230 x 220 mm speed: 20 - 100 m/min total power requirement: 2,69 kW weight of the machine ca.: 1,03 t dimensions of the machine ca.: 2,23 x 0,88 x 1,89 m 280G,320G and 320GL are durable and stably laid out for universal separetion from full materials,pipes and profiles.A fast and precise mitre adjustment is characteristic within the range of 90 deg to 30 deg.The sawing property is situated in-line and becomes manuel strained in the angle of 90 deg. The machines are fitted with a removable coolant tank incorporating a submerged  ...

cutting diameter: 360 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 700 mm work height max.: 690 mm Capacity 90° rectangular: 700 x 360 mm : 360 mm : 360 mm Capacity 45° rectangular: 450 x 360 mm : 360 mm : 360 mm : 590 x 360 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 3,67 kW weight of the machine ca.: 1,46 t dimensions of the machine ca.: 2850 x 1,3 x 1800 m Horizontal band saw with linear guideways, ideal for mitre cuts between 90° and +30°. Auto height adjustment sensors ensure that the bow can approach the material at high speed. The hydraulic cutting control makes the bow rise up again after a cut has been made. This process is controlled by a digital counter on the control panel. The bow angle is shown in the digital display. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 4160 mm cutting width: 610 mm : 320 x 320 mm Capacity 90° rectangular: 610 x 320 mm dimensions of saw-band: 4160 x 34 x 1,1 mm : 320 mm : 320 x 320 mm Capacity 45° rectangular: 355 x 320 mm : 280 mm : 280 mm : 280 x 280 mm capacity 60 degrees: round: 320 mm capacity 60 degrees: square: 320 x 320 mm capacity 60 degrees: flat: 510 x 320 mm speed: 20 -100 m/min total power requirement: 2,7 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2,1 x 1,2 x 1,35 m Beka-Mak Lineer Sledge horizontal bandsaws have been designed to give a low cost compact and rugged machines.The bow is constructed in heavy gauge steel and mounted two chromed and grinding pillars offer a strong rigid sawframe, providing a high degree of accurancy when cutting. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pum ...

cutting diameter: 800 mm saw band length: 9600 mm cutting width: 1300 mm capacity 90 degrees: square: 800 x 800 mm : 1300 x 750 mm : 800 mm : 770 mm Capacity 45° rectangular: 570 x 750 mm capacity 60 degrees: round: 570 mm capacity 60 degrees: square: 770 x 770 mm capacity 60 degrees: flat: 570 x 750 mm : 800 mm : 770 mm : 1070 x 750 mm table height: 880 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 12,42 kW weight of the machine ca.: 6,7 t dimensions of the machine ca.: 5,05 x 2,2 x 2,9 m Product Description PRODUCT DESCRIPTION Two way powered mitre with NC angle setting Features ?Powered mitre setting with NC control ?Mitre cuts to +/-60 deg with +/-0.1 deg tolerance ?5-deg inclined blade for optimum cutting performance ?Hydraulic blade tensioning ?Blade deviation control with auto shut off ?Cutting feed & pressure regulation ?Material height sensor with rap ...

cutting diameter: 330 mm saw band length: 3870 x 34 x 1,1 mm cutting width: 400 mm band speed: 15 - 90 m/min : 400 x 200 mm cutting capacity - round: 330 bei 90° mm : 250 x 170 mm cutting capacity - round: 250 bei 45° mm work height max.: 940 mm cutting capacity - square: 320 bei 90° mm cutting capacity - square: 230 mm total power requirement: 3,0 kW weight of the machine ca.: 665 kg dimensions of the machine ca.: 2660 x 204 x 2060 mm Description: The ARG 330 F. is a robust manual metal band saw with high cutting accuracy for medium to heavy workpieces! Your exceptionally compact design, as well as its massive saw frame made of gray cast iron are ideally suited for use in workshops and production facilities. The The basic equipment of the machine enables the processing of a wide variety of different materials, including stainless and tool steels. With With this machine, miter cuts ar ...

cutting diameter: 90° / 810 mm saw band length: 8200 mm cutting width: 850 mm : 810 x 810 mm : 850 x 810 mm : 480 mm : 480 x 480 mm Capacity 45° rectangular: 480 x 810 mm table height: 585 mm cutting speed: 20 - 100 m/min dimensions of saw-band: 8200 x 41 x 1,3 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 5,5 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 3,9 x 1,2 x 2,35 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies oolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cutting proces and the saw arm is lifted hydraulically. ?inverter ?hydromechan ...

closing pressure: 5980 kN clamping plate: . mm distance between columns: . mm total power requirement: kW weight of the machine ca.: 22,5 t dimensions of the machine ca.: m Spraying machine Manufacturer Acheson, Model DAG 1000 FCT S-B AB, Year of construction 2001, Foundry robot Manufacturer ABB, Model IRB 440F / 45, Control S4C-Plus, Year of construction 2004, trimming Manufacturer rice, Model SEP 7-20, An oven can optionally be purchased Manufacturer Westofen, Model W 80, Capacity 800 kg, Built in 1985 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 2500 mm y-travel: 2100 mm spindle taper ISO: 50 spindle turning speed range: 5-1000 U/min spindle travel: 900 mm Radial face slide: 650 mm radial face slide travel: 250 mm angular milling head: rotary table:: table surface area: 2000x2500 mm table height: 800 mm table travel: 1700 mm total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: m Table, Floorplate, tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 420 mm saw band length: 0 mm cutting width: 0 mm total power requirement: kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 6000 mm y-travel: 2000 mm Plate area: 9000x6000 mm digital readout: AEG total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 2500 mm y-travel: 1900 mm w-axis: 1100 mm radial face slide travel: mm rotary table:: 1800x1300 mm table adjustable: 1000 mm digital readout: Pfillips workpiece: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mm y-travel: 510 mm z-travel: 510 mm Control: Mazatrol M 32 size of pallet: 500x500 mm spindle taper ISO: 40 turning speeds: 50-10000 U/min Spindle capacity: 7,35 KW tool magazin:: 60 Cooling through the spindle: bar numbers of pallets: 6 total power requirement: kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 16000 mm y-travel: 3000 mm taper ISO: 50 w-axis: 1200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 8000 mm y-travel: 3000 mm spindle bore: 240 mm w-axis: 1650 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 7000 mm y-travel: 2000 mm taper ISO: 50 w-axis: 1100 mm z-axis: 350 mm voltage: 400 V total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 10500 mm y-travel: 1200 mm z-travel: 1600 mm control: Heidenhain TNC 426-CA taper ISO: 50 P.D.B. Table dimensions: 1100 x 12000 mm spindle speeds: 20 - 2000 mm voltage: 380 V total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 4000 mm y-travel: 2500 mm z-travel: 7000 mm taper ISO: ISO 50 P.D.B. total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 800 mm z-travel: 5000 mm control: Siemens tool adaptor: ISO 50 number of spindle speeds: 285-3000 voltage: 380 V total power requirement: 36 kW weight of the machine ca.: t dimensions of the machine ca.: m ATC 40 positions 2x workpiece holders with (2x) hydraulic support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 25 - 90 m/min total power requirement: 1,1/1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm turning speed range:: 36 / 72 m/min dimensions of saw-band: 2950 x 25,4 x 0,9 mm weight of the machine ca.: 0,4 t Dimensions (LxWxH): 1,5 x 0,9 x 1,5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rounds: 200 mm Squares: 0 mm Flats: 120 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Shaft Ø:            200mm Number of rolls:    3 Stroke X-Axis:      700mm Capacity flat:      120 x 50 x 2000 mm Capacity Tube:      133 x 6,0 mm mm Capacity bar:       80 x 80 x 2000 mm Capacity T-Profile: 120 x R 1500 mm Capacity HEA-Profile:320 x R 1600 mm Working speed:      4500 - 9000 mm Adjustment siderolls:550 Length:             3.000 mm  Width:              2.500 mm  Height:             2.500 mm  Weight:             5.100 kg   

capacity 90 degrees: round: 350 mm capacity 90 degrees: square: 330 mm : 500 x 310 band speed: 15 - 100 m/min table height: 844 mm dimensions of saw-band: 4250 x 34 x 1,1 mm total power requirement: 2,2 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,4 x 2,4 x 1,935 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350 x 200 saw band length: 3375 x 27 x 0,9 mm band speed: 37 + 74 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,61 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 225 mm dimensions of saw-band: 2480 x 27 x 0,9 mm table height: 935 mm cutting speed: 45 + 90 m/min : 225 mm : 145 mm : 90 mm : 150 x 245 mm : 190 x 150 mm capacity 60 degrees: flat: 120 x 90 mm total power requirement: 1,1 kW weight of the machine ca.: 0,24 t Dimensions (LxWxH): 1380 x 580 x 930 mm WMT promotional price ! 2899, -EUR • miter left 60 ° • Quick-action vice with quick-release device a. • Quick release lever for easy handling • Frame and gearbox in one piece, very quiet cut and very low vibration • Electrical monitoring of belt tension and belt break, saw blade cover. • saw blade guide made of carbide • Large machine bed • Machine base (disassembled) with automatic cooling The AutoCut system consists of: Hydraulic cylinder, feed control, spring assembly, limit switch Automatic saw frame lowering over the hydraulic Cylinder, infinitely adjus ...

Rounds: 60 mm Squares: 0 mm Flats: 70 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 2   Horizontal and vertical:H + V  Shaft Ø:               60mm Number of rolls:       3 Resistance moment:     10CM³ Capacity flat:         70 x 12 x R 600 mm Capacity Tube:         76,1 x 2,9 x R 1200 mm Capacity bar:          40 x 40 x R 600 mm Capacity T-Profile:    70 x 70 x 8 x R 700 mm Working speed:         5,2 M/Min mm Length:                1.000 mm  Width:                 1.200 mm  Height:                1.200 mm  Weight:     ...

Rounds: 105 mm Squares: 120 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   PBT - INDUMASCH 25 Profile bender 25 Ton stroke X = 265 mm MACH - ID 6371 Make: PBT Type: INDUMASCH 25 Control: PBT PC 50 YOP: 2014 Horizontal and vertical    Horizontal Shaft Ø     105 mm Number of rolls    3 Stroke X-Axis      265 mm Capacity flat    120 x 15 x R = 2000 mm Capacity Tube114 x R = 1200 mm Capacity T-Profile80 x 80 x 8 x R 1200 mm Length    1.500 mm Width      1.200 mm Height     1.400 mm Weight     1.150 kg

square edge steel: 16 x 16 mm flat steel: 100 x 5 mm L-beam: 60 x 8 mm bending radius min.: 190 mm round bar steel: 18,0 mm weight of the machine ca.: 33,0 kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending radius min.: 190 mm square edge steel: 20 x 20 mm flat steel: 100 x 7 mm round bar steel: 22,0 mm L-beam: 100 x 10 mm weight of the machine ca.: 34,0 kg. properties - For precise cold and hot bending of flat, round and square steels - Stable construction for screwing onto the workbench - Infinitely adjustable bending stop - With eccentric quick release for efficient work - Readable bending angle up to 120 ° - High repeat accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths Bending power cold warm Flat steel 100 x 7 mm 100 x 15 mm 65 x 12 mm 75 x 20 mm Round steel 22 mm 27 mm Square steel 20 x 20 mm 25 x 25 mm Angle steel 100 x 10 mm 100 x 15 mm scope of delivery - Bending plate sharp / round - Stepless angle stop - Terminal block with eccentric clamp - Material stop The data for this ad was created with ModulMWS - the software soluti ...

Rounds: 130 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   IMCAR - RAD PIR Pyramidal Straightening Machine Flange ø 309mm x 100mm MACH - ID 6356 Make: IMCAR Type: RAD PIR YOP: 1999 Horizontal and vertical     Horizontal Shaft Ø    130 mm Number of rolls     3 Horizontal       Horizontal Working speed       0 - 5 mm pyramidal straightening machine with 450 rol diameter Flange ext. ø 309mm, thickness 18mm (material iron) Flange ext. ø 360mm, thickness 35mm (material iron) Flange ext. ø 330mm, thickness 35mm (material iron) Flange ext. ø 170mm (material teflon)  Flange ext. ø 309mm, thickness 18mm (material iron) Flange ext. ø 360mm, thickness 35mm (material iron) Flange ext. ø 330mm, thickness 35mm (material iron)  ...

MORI SEIKI SH-400 Horizontal Machining Center was manufactured in 2000 in Japan by Mori Seiki CO., LTD. The CNC milling machine is equipped with Mori Seiki MSC-501 numerical control. The price of the machine includes various types of frames. Technical data of the MORI SEIKI SH-400 CNC milling machine - CNC control: MORI SEIKI MSC-501 - machine weight: 10100 kg

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 18 - 100 m/min table height: 940 mm total power requirement: 1,5 kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 820x610 capacity 45 degrees: round: 550 mm capacity 45 degrees: square: 550 mm capacity 45 degrees: flat: 550x600 mm capacity 60 degrees: round: 370 mm capacity 60 degrees: square: 370 mm capacity 60 degrees: flat: 370x600/450 mm saw band length: 7260 x 41 x 1,3 mm band speed: 15 - 100 m/min table height: 800 mm total power requirement: 5,5 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 5,85 x 3,7 x 2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mm saw band length: 2455 mm table height: 850 mm cutting width: 230 mm cutting speed: 25 - 80 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm : 90 mm : 90 mm : 90 x 100 mm : 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mm stroke back stop: 210 mm cross-slide: 230 x 185 total power requirement: 1,2 kW weight of the machine ca.: 0,24 t dimensions of the machine ca.: 1,2 x 0,6 x 1,7 m Miter cuts to 60 ° left - cutting speed 35/70 m / min. - Vice with rapid clamping device - Bandsaw blade guide made of hard metal - Band tension control - Electric cooling automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 25 - 90 m/min total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 + 70 m/min total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: 1,1/1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 240 mm dimensions of saw-band: 2730 x 27 x 0,9 mm table height: 920 mm cutting speed: 35 + 70 m/min : 240 mm stroke back stop: 230 mm cross-slide: 270x230 : 210 Impact energy: 200 Air consume per blow: 200x210 : 130 mm : 130 mm : 130x160 mm total power requirement: 1,2 kW weight of the machine ca.: 0,26 t dimensions of the machine ca.: 0,9 x 1,6 x 1,74 m WMT promotional price ! 2899, -EUR • miter left 60 ° • Quick-action vice with quick-release device a. • Quick release lever for easy handling • Frame and gearbox in one piece, very quiet cut and very low vibration • Electrical monitoring of belt tension and belt break, saw blade cover. • saw blade guide made of carbide • Large machine bed • Machine base (disassembled) with automatic cooling The AutoCut system consists of: Hydraulic cylinder, feed control, spring assembly, limit switch Automatic saw fram ...

capacity 90 degrees: round: 310 mm capacity 90 degrees: square: 280 mm : 400x250 saw band length: 4020x34x1,1 mm band speed: 37 + 74 m/min table height: 940 mm total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 1,5 x 1,78 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 500 mm capacity 90 degrees: square: 420 mm : 600x400 saw band length: 5320x34x1,1 mm band speed: 15 - 100 m/min table height: 805 mm total power requirement: 3,0 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: 1,72 x 2,5 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 37 + 74 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mm saw band length: 2450 x 27 x 0,9 mm table height: 915 mm band speed: 35 + 70 m/min connected load frequency: 400 V capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 230 x 185 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.  ...

capacity 90 degrees: round: 510 mm capacity 90 degrees: square: 450 mm : 650x450 band speed: 15 - 100 m/min table height: 844 mm dimensions of saw-band: 5320 x 34 x 1,1 mm total power requirement: 3,0 kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 1,9 x 2,87 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 380 mm saw band length: 4800 mm cutting width: 520 mm : 380 x 380 mm Capacity 90° rectangular: 520 x 380 mm : 300 mm : 300 x 300 mm Capacity 45° rectangular: 300 x 380 mm dimensions of saw-band: 4800 x 34 x 1,1 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 3,67 kW weight of the machine ca.: 1,33 t dimensions of the machine ca.: 2,85 x 0,93 x 1,66 m Product Description Beka-Mak Lineer Sledge horizontal bandsaws have been designed to give a low cost compact and rugged machines.The bow is constructed in heavy gauge steel and mounted two chromed and grinding pillars offer a strong rigid sawframe, providing a high degree of accurancy when cutting. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. These models can cope with most types of material.B ...

cutting diameter: 330 mm saw band length: 3870 x 34 x 1,1 mm cutting width: 400 mm band speed: 15 - 90 m/min : 400 x 200 mm cutting capacity - round: 330 bei 90° mm : 250 x 140 mm cutting capacity - round: 240 bei 45° mm work height max.: 945 mm cutting capacity - square: 320 bei 90° mm cutting capacity - square: 200 bei 45° mm total power requirement: 3,0 kW weight of the machine ca.: 720 kg dimensions of the machine ca.: 2650 x 2040 x 2050 mm Very robust machine framework composes of castings from grey cast iron andensures vibration absorption. In order to achieve maximum stiffness of the whole system and cutting accuracy, the band saw arm is attached to a sturdy turntable on both sides in massive housing fitted with pre-stressing tapered roller bearings. Modern concept of the band saw arm allows for large cutting ranges in both upright and angular cutting. Massive arm turning syst ...