horizontal cnc used for sale

upper floor, steel tank with welded consoles and four domes, ideal as rainwater tank can be ordered with inlet and overflow on request with partition wall in the tank (13.5 m³ + 25 m³, total volume: 38.5 m³) Total volume: 38.5 m³ Dimensions: Ø 2.95 m × 6.40 m long Consoles are 30 cm high, so the total height is 3.25 m

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long can be ordered on request with extinguishing water connections or as a rainwater tank with inlet and overflow

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 30 m³ Dimensions: Ø 2.50 m × 6.60 m long can be ordered on request with extinguishing water connections or as a rainwater tank with inlet and overflow

The four-axis horizontal machining center is designed for milling, boring, hole drilling and threading in the manufacture of complex parts from various metals and alloys in batch production. The machine is equipped with an automatic tool changer with a magazine for 62 positions, an automatic pallet changer Partially disassembled.

X-travel: 2600mm, y-travel: 1600mm, z-travel: 1700mm, max. load: 4t, number of tool slots: 599, max. rotational speed: 8000/min, dimensions: 44,490x16,460mm, with automatic pallet system, buffer shelve, production host computer and other elements.

X-travel: 560mm, y-travel: 560mm, z-travel: 510mm, pallet clamping surface: 400x400mm, tool cone: SK40, rotational speed: 18,000/min, controls: SIEMENS 840D, weight: 8.2t, without accessories, with documentation.

X-travel: 450mm, y-travel: 500mm, z-travel: 450mm, max. rotational speed: 16.000/min, spindle distance: 450mm, connected load: 72kVA, controls: SIEMENS Sinumerik 840D, length: 5100mm, width: 3050mm, height: 2800mm, weight: 20t.

X-travel: 300mm, y-travel: 500mm, z-travel: 450mm, max. rotational speed: 16,000/min, spindle distance: 300mm, connected load: 82kVA, controls: SIEMENS Sinumerik 840D, length: 5100mm, width: 3050mm, height: 2800mm, weight: 20t.

X-travel: 800mm, y-travel: 630mm, z-travel: 630mm, controls: uni-Pro NC 80-C, length: 5600mm, width: 4200mm, height: 3600mm, weight: 12t, operational hours counter: 88,356h, with documentation.

X-travel: 650mm, y-travel: 650mm, z-travel: 650mm, clamping surface: 400x400mm, max. load: 400kg, length: 4600mm, width: 3920mm, height: 2900mm, weight: 12.8t, operational hours counter: ca. 60,000h, with documentation, was maintained regularly.

This is a special machine for the machining of ball bearing slewing ring supports, controls: Siemens SINUMERIK 810M, with documentation, one circuit board is defective.

There are one TOS WH10 TNC and one TOS WH10 CNC available, x-travel: 1250mm, y-travel: 1100mm, z-travel: 1000mm, W-travel: 600mm, table dimensions: 1100x1000mm, with accessories, various tools, holders, spindles, cutter heads, boring heads, tool cabinets and clamping screws.

BVM Brunner Compacta 5010

Work spindle diameter: 110mm, work spindle: ISO 50, drilling depth: 710mm, face plate diameter: 530mm, max. turning diameter for facing: 1200mm, table dimensions: 1000x1120mm, rotational speed: 6-1250/min, with documentation and accessories, without hour meter, has been regularly serviced, on-site inspection is possible, available from May 2024.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 870 mm band speed: 18 - 110 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,63 t dimensions of the machine ca.: 1,8 x 1,85 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SECOND-HAND MUTILPLE HORIZONTAL MORTISER COMEC MOD. MMS/15-2000-CA - Automatic loader - Max. working length mm. 2000 - No. 7 spindles - Volt 380/50 - S/N 970406 - CE rules (year 1997)

General: Year of construction 2019 Spindle speed 1,450 rpm Clamping surface 300 x 600 mm Largest grinding wheel 355 x 38 x 127 mm Travel speed table 5 – 25 m/min Distance between spindle and table 500 mm Weight 1.700 kg Other equipment and accessories included: Automatic feed control AD5 Coolant device Hydraulic

cutting diameter: 200 mm saw band length: 2490 x 20 x 0,9 mm cutting width: 240 mm band speed: 40 / 80 m/min : 240 x 120 mm cutting capacity - round: 200 bei 90° mm cutting capacity - square: 200 bei 90° mm : 155 x 70 mm cutting capacity - round: 155 bei 45° mm cutting capacity - square: 130 bei 45° mm cutting capacity - round: 95 / 30° mm coolant tank: 15 l work height max.: 900 mm total power requirement: 0,75/0,95 kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 1,43 x 0,75 x 1,4 m The ARG 200 plus is a robust manual metal band saw with high cutting accuracy for small to medium-sized workpieces! Due to its compact design, this machine is ideal for use in workshops or maintenance. The basic equipment of the machine enables processing of a large number of different materials. With this machine, miter cuts from -45° to +30° are continuously possible (swivel rang ...

HORIZONTAL BI-SPINDLE MACHINING CENTER 5 AXES Condition Used Good Condition Control type Siemens Sinumerik X Axis Stroke 450 mm Y Axis Stroke 500 mm Z Axis Stroke 450 mm Rapid feed X-Y-Z 60 m/min Spindle spacing 450 mm Spindle speed 16,000 rpm Spindle power 28 Kw Tool attachment HSK 63 Tool magazine 2 x 50 positions Chip Evacuator Accessories

With milling disks, tools and accessories, without documentation, on-site inspection is possible, year of manufacture unknown.

X-travel: 1300mm, y-travel: 550mm, z-travel: 560mm, table width: 600mm, max. load: 1t, table height: 950mm, controls: Siemens SINUMERIK, length: 4800mm, width: 1970mm, height: 2450mm, weight: 5.4t, with documentation.

:::SPECIFICATIONS::: CNC Model: Mitsubishi CNC version: Meldas 60S series Main spindle nose: ASA 5 Main spindle power: 7,5Kw Main spindle bar clearance: 52mm Turning length: 290mm Main spindle revolutions: 4000 Number of tool turrets: 2 Number of tool places before turret: 8 Number of fixed tool spaces before turret: 8 X axis travel before turret: 120mm Z axis travel before turret: 200mm Number of tool spaces second turret: 5 Number of fixed tool places second turret: 5 X axis stroke second turret: 240mm Second turret Z Axis Stroke: 290mm Rapid feeds linear axes X Y Z: 16m/min Model and brand bar magazine: Iemca Boss 551 - E Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 2130mm Width: 1800mm Height: 1800mm Weight: 2400Kg

Press force 2000kN, lifting speed: 10mm/s, max. operating pressure: 32MPa, weight: 400kg, with steel base frame, on-site inspection is possible.

Max. operating pressure: 70bar, hydraulic fluid filling quantity: 630l, with loading portal and sliding guide with carriage.

Power: 5.5kW, length: 2800mm, width: 1300mm, height: 1700mm, weight: 2.7t.

Blade length: 5600mm, opening width: 1000mm, band length: 2800mm, an inspection is possible.

With documentation, the machine was only in operation for a few hours, has adjustable shoulders and matching format parts, an on-site inspection is possible.

Bag dimensions: 30-400x10-200x0-70mm, max. output: 250 bags/min, connected load: 4.5kW, length: 3000mm, width: 1075mm, height: 1600mm, weight: 900kg.

With documentation, an inspection is possible.

With documentation and some accessories, an on-site inspection is possible, but not under power.

Output: 200-300hl/h, operational pressure: 7bar.

There are three identical machines available, connected load: 8.5kW.

cutting diameter: 650 mm saw band length: 8200 x 54 mm cutting width: 1,6 mm Capacity 90° - rectangle: 650 x 850 mm Capacity 90° - square: 650 x 650 mm total power requirement: 5,5 kW / 2775 Nm weight of the machine ca.: 6400 kg dimensions of the machine ca.: 2700 x 1500 x 4100 mm The KLS 650 x 850 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor  ...

cutting diameter: 500 mm saw band length: 6990x41x1,3 mm cutting width: 860x500 mm cutting speed: 15-90 m/min Feed: 400 mm/min Rapid movement: 2500 mm/min main drive motor: 5,5 kW cutting length min.: 8 mm total power requirement: 8,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3,3x1,2x2,42 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Friedrich Wilhelm Heider GmbH horizontal tank used for cold water, year of construction: 1993, volume: 30.000 liter, maximum working pressure: 10 bar, maximum working temperature: 95ËšC, dimensions: 7000 mm x 2750 mm x 3150 mm.

Friedrich Wilhelm Heider GmbH horizontal tank used for hot water, year of construction: 1993, volume: 30.000 liter, maximum working pressure: 10 bar, maximum working temperature: 95ËšC, dimensions: 7000 mm x 2750 mm x 3150 mm.

weight of the machine ca.:1 t dimensions of the machine ca.: 2 x 2 x 2 m

CNC flat and profile grinding machine, horizontal grinding spindle LSCH-220 Control: CNC SINUMERIK 840 D workpiece size 800 x 400 x 360 mm Table load: 500 kg Grinding wheel dimensions: 500 x 203 x 80 mm Spindle speed: 600 - 2000 rpm Total power requirement: 62 KW Dimensions: 6.2 x 2.8 x 2.78 m Machine weight: 7.100 kg

x-travel:600 mm y-travel:655 mm z-travel:685 mm weight of the machine ca.:17 t dimensions of the machine ca.:4x3,1x3,1 m

x-travel:750 mm y-travel:840 mm z-travel:865 mm number of spindles:2 From cylider crank case production 2 spindles HSK-A63 4 axes, A-axis

5-axis machine

weight of the machine ca.:11,2 t one spindle

Max diam 250 , max lenght 2000, 3 x heads , change gears

control:siemens 1P 6SL 3054--0CE01-1AA0 Documents:vorhanden

cutting diameter:520 mm saw band length:7239 mm cutting width:520 mm sawing motor:5,5 kW cutting speed:20 - 130 m/min cutting width at rectangle material:520 mm total power requirement:9,5 kW weight of the machine ca.:3,8 t Machine with multi feed device chip conveyor infeed roller stand

Rounds: 1 mm Squares: 1 mm Flats: 1 mm Flats on edge: 1 mm Angles: 1 mm (1) horizontal / (2) vertical: 1   Clamping size: 20 - 170 mm Clamping prism Wall thickness 25 mm in one pass Feed travel 100 mm Turning speed  40 - 100 Rpm The pipe is clamped with a self-centering prism clamp (for which no spare parts are needed). The prism clamp can handle the entire clamping range of the machine. The specially developed chisel set allows the machining of all pipe sizes within the range of the machine. Without having to adjust chisels again and again. Thanks to the stability of the machines, every finishing operation is the same. This promotes the welding result, which is of the greatest importance when welding with, for example, a welding robot. Length:1250mm Width:980mm Height:1650mm Weight:1450kg

Rounds: 105 mm Squares: 105 mm Flats: 105 mm Flats on edge: 105 mm Angles: 105 mm (1) horizontal / (2) vertical: 1   Horizontal and vertical:Horizontal Shaft Ø:               105mm Number of rolls:       3 Stroke X-Axis:         265mm Capacity flat:         50 x 10 x r = 300mm Capacity Tube:         114 x r = 2000Ø x mm Capacity bar:          60 x 60 x r= 1000mm Capacity T-Profile:    70 x 70 x 8 x r = 1000mm Capacity HEA-Profile:  120 x 120 x r = 1800mm Working speed:         24mm/min. Length:                1600mm Width:                 1200mm Height:            ...

Capacity round maximum diameter: 10 mm Angle degrees maximum: 260 Capacity square: 320 mm Workpiece height: 9 mm Workpiece width: 27 mm Capacity rectangle: 3150 mm Capacity 90°:      260° Cutting 90°:       320 x 200 Capacity L 45°:    230° Capacity R 45°:    240 x 200° Cutting speed Vario:80 M/Min Circle blade size: 3150 x 27 x 0.9mm Power:             1.8kW Length:            3000mm Width:             2400mm Height:            1800mm Weight:            1100kg

Horizontal machining center with 2-fold changing table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M Fabr. No. 34 Year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle Drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA- Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant device with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 ton. good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 ton. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg; used

Capacity round maximum diameter: 320 mm Angle degrees maximum: 2 Capacity square: 320 mm Workpiece height: 11 mm Workpiece width: 34 mm Capacity rectangle: 380 mm Cutting 90°:       320 Cutting flat 90°:  320 x 380mm Cutting speed Vario:15 - 80 Circle blade size: 4240 x 34 x 1,1mm Power:             3.8kW Length:            5100mm Width:             2250mm Height:            2915mm Weight:            1550kg