horizontal cnc lathe used for sale

1 L + Z lathe Make: Stanko Model No.: 1M-63B Year of Make: 1988 Technical details: Turning diameter over bed: 700 mm Turning diameter over support: 350 mm Turning length: 3000 mm Peak height measured in bed: 320 mm Bore of the working spindle: 70 mm Spindle speed max.: 10 - 1250 / 24 step rpm Cross feed: 0.0256 ... 0.378 mm/rev Longitudinal feeds: 0.064...1.025 mm/rev Tailstock quill adjustment:: 240 mm Tailstock mount MK: MK5 Total power requirement: 14.0 kW Machine weight approx.: 5.0 t Travel support: Support longitudinal=3000mm Support transverse=400mm Tool support=220mm Tool carriage can be swivelled 90° right/left Equipment / Accessories Rapid traverse Machine Lamp Coolant device with pump 2x Bezel 3-jaw chuck

GALLIC 16 N lead and pull spindle lathe with ACU-Rite digital display - Turning diameter over support 200mm - Turning diameter over bed 320mm - Tip height 160mm - Center width 1000mm - Speed range 45-2500 rpm - Spindle bore 40mm - Automatic feeds X/Z axis LxWxH 2.4x1x1.7 meters / Weight 1600Kg

VOEST DA 360 - Lead & Pull Spindle Lathe -Heidenhain digital display -Peak height above bed 400mm -Turning diameter over bed 800mm -Turning diameter over support 500mm -Turning length 1000mm -Rod passage approx. 87mm -Speed range 14 - 1000 rpm / 18x speeds -Automatic length / face feeds -Automatic input Z-axis -Tailstock MK 5 -Wedge bar chuck 250mm -Multifix base holder with insert -Work light -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3500 KG

Key data: 170 mm, 350 mm, 3250 U/min

Lead and pull spindle lathe Colchester Master VS 3250 Tip height 170mm Center width max 750mm Circulation over bed max 350mm Circulation via cross slide 196mm Spindle bore 42mm Spindle D1-4" Spindle speeds from 0 - 3250 by means of VFD and 3 gear stages Tailstock MT4 Incl.: Digital display on 3 axes Elesta Quick-change steel holder Multifix with 7 tool holders 2pcs 3-jaw chuck 160 and 250mm with 3 set of jaws Collet holder with lever with 23 collets 173E Kornerspitse Drill chuck Coolant Pump Tool cabinet with tools and manuals Cleaned and maintained

WEILER CONDOR VS 2 from university (test laboratory) -Guided tours "as good as new" -Tip height 165mm -Circumferential diameter over bed 330mm -Tip width 800mm -Speed range 28-2800 rpm -Automatic longitudinal/plane feeds -Spindle passage 40mm -Thread/Metric/Inch etc. -Collets - quick clamping device incl. collets -Vierbackenfutter-Röhm -Face Plate -Four-jaw chuck faceplate -Lining protection -Multifix with inserts -Emergency stop -Documentation Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900Kg

Lead & Pull Spindle Lathe EXCELLO - DLZ 500 SL -Tip height 250mm -Turning diameter over bed 500mm -Turning diameter over support 310mm -Center width 3000mm -Rod passage 65mm -Speeds: 28-1400 rpm -Automatic longitudinal/plane feeds -Three-jaw chuck 250mm -Four-jaw chuck 250mm -Multifix base holder with inserts -Bezel -Tool cabinet -Documentation Dimensions: LxWxH 5.5x1.4x1.6 meters / Weight 3500Kg

Guide & Tension Spindle Lathe GEMA LZ 200 -Three - Axis Digital Display "NEW" -Guided tours " VERY GOOD" -Tip height 200 mm -Center width 1000 mm -Turning diameter over bed 400mm -Turning diameter over support 200mm -Spindle passage 54 mm -Automatic longitudinal/plane feeds -Speed range 36-2200 rpm -Tailstock MK 4- Adjustment 200mm -Three-jaw chuck 250mm -Electric lining protection -Multifix with inserts -Coolant device -Work light -Machine feet -Chip tray Dimensions: LxWxH 2x1.2x1.6 meters / Weight 1800Kg

Lead & Pull Spindle Lathe NARDINI MS 125 E -Peak height above bed 150mm -Turning diameter over support 140mm -Tip width 500mm -Spindle speeds 50-2500 rpm -Spindle passage 34mm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK3 -Collet quick-clamping device with various collets 173E -Tool cabinet with machine-related accessories -Swarf back wall -Documentation Dimensions: LxWxH 1.6xx0.7x1.6 meters / Weight 1200Kg

DESCRIPTION WEILER LZ330 / From Educational Institution -Turning diameter over bed 330mm -Turning diameter over support 165mm -Turning length 800mm -Speed range 25 - 2800 rpm -Automatic / longitudinal plan feeds -Multifix with 3x inserts Hobkn Aujvwctps S Tjl -Drive power 3KW -Three-jaw chuck -Collet device with 20x collets -Copying device -Miscellaneous Accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

Guiding and pulling spindle lathe OPTIMUM "Optiturn 4210 V" With 3 axis digital display Year of Make: 2015 Spindle bore: 54 mm Center width: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm Stepless speed with display With the following accessories: Multifix Tool Holder Coolant Setup Three-jaw chuck 0 200 mm Four-jaw chuck 0 250 mm Collet chuck complete with collets up to 0 32 mm Feed protection Chip protection with lighting Fixed Lynette 0 approx. 150 mm Moving Lynette 0 approx. 100 mm 4 Height Adjustable Machine Shoes 1 pc. Rotating centering tip Operating instructions

Tip height: 125 mm Center width: 800 mm Gr. turning Ø over bed/over carriage guide: 280/245 mm Spindle holder, thread according to DIN 800 Spindle bore: 24 mm Spindle speeds infinitely adjustable: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 Inch Thread: 4 - 112 Gg/" electr. Connection: 380 V, 0.7/1.4 kW Space requirements: Weight approx.: 500 kg

Tip height: 150 mm Center width: 760 mm Swivel Ø over bed/support slide: 300/165 mm Spindle bore: 32 mm Spindle holder, short taper according to DIN 55027: Gr. 5 Tailstock quill taper: MK 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 Inch Thread: 75 - 2.5 Gg/" 19 module threads: 0.1 - 1.75 module 19 Diametrical Pitch Thread: 70 - 4 DP electr. Drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Space requirement: 1800 x 770 x 1300 mm

Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 57.3 -Turning diameter: 400 - 1600 mm -Travel: X 180 mm / Z 60 mm -Drive motor: 1.1 kW -Accessories: incl.transport and assembly frame, individual components see photos -Dimensions: 1930/1280/H1000 mm -Weight: 730 kg

Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 56.4 -Turning diameter: up to approx. 900 mm -Travel: X 110 mm / Z mm -Drive motor: 0.55 kW -Dimensions: 1660/1700/H470 mm -Weight: 224 kg

Lead & Pull Spindle Lathe / WEILER COMMODOR 230 AC -CE marking -Year of construction 2002 -Tip height 230mm -Circumferential diameter over bed 475mm -Circumferential diameter over face slide 270mm -Tip width 1000mm -Spindle speeds 25 - 2000 rpm -Automatic longitudinal/plane feeds -Tapping/Metric/Inch/Module etc. -Spindle head Din 55027 / size 6 -Tailstock MK 4 -Drive power 11KW -Electric lining protection -Multifix base holder with inserts -Three-jaw chuck -Swarf back wall with work light -2x Emergency / Off -Coolant device -Machine feet -Documentation Dimensions: LxWxH 2.6x1.1x1.6 meters / Weight 1900Kg

Weiler Commodor B incl. 3 - axis digital display - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Four-jaw chuck - Electric lining protection - 2x Emergency / Off - Swarf back wall - Coolant device - Work light - Multifix with inserts - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

For sale is a high-quality lead and pull spindle lathe from the renowned German manufacturer Weiler, model Condor VS 1. The machine convinces with its high precision, robust construction and durability and is in a very well-maintained and technically perfect condition. Ideally suited for the workshop, single part production and precise turning work. General information: Machine Type: Lead and Pull Spindle Lathe Manufacturer: Weiler Model: Condor VS 1 Year of construction: approx. 1977 Condition: Well maintained, technically perfect Availability: Immediately available Technical data: Max. turning diameter over bed: approx. Ø 330 mm Max. turning diameter via support: approx. Ø 170 mm Max. turning length: approx. 800 mm Bar passage: approx. Ø 38 mm Spindle: Speed range: approx. 24 – 2,800 rpm Feed & Thread: Feed range: approx. 0.037 – 1.253 mm/rev  ...

conventional ´ traditional Tischbohrwerk, work spindle diameter 85 mm Traverse paths x 1000 mm, y 1000 mm, z 900 mm, ISO 40,. Clamping area table 1000 x 1120 mm with position indicator

Horizontal side channel pump Materials: - Case: 1.4581 - Wheels: 1.4408 - Wave: 1.4571 Housing sealing: single-acting sliding ring seal, carbon/silicon carbide/viton Version A6: Pump mounted on base plate elastically coupled with 1.35 kW IEC standard rotary current motor Pressure: 2 bar Power: 800 l/h Revolutions: approx. 1,450 rpm Rated frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 Type of protection: E Ex eII T3 Type of construction: B3 Pumps partly unused, therefore in very good condition!

Well-preserved horizontal pillow-pack packaging machine. Very well suited for cylindrical or other elongated products. Was used to extract a sausage in foil. Please see the video. Fully functional, there is some evidence of second-hand. Price on request machine is immediately available.

Materials: Housing: 1.4581 Wheels: 1.4408 wave: 1.4571 Sealing: single-acting mechanical seal, carbon/silicon carbide/Viton Model A6: Pump on base plate mounted elastic coupled with 1.35 kW IEC standard motor, three-phase Pressure: 2 bar Revolutions: approx. 1,450 U/min Output: 1,200 l / h Mains frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 protection class: E ex eII T3 Design: B3 Pump partially unused in excellent condition!

Plate filter with pump Manufacturer: Rover Pompe Type: Colombo Field of use: Olive oil Filter plates: 25 PCs. End plates: Stainless steel Sheet size: 20 cm x 20 cm Pump: Capacity: 28 l / min Conveying height: 22 m Water temp. Max: 35 ° C In very good condition! Plate filter incl. new replacement filter plates and replacement filters!

Bei Fragen: 01718367957

Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg

Capacity 85 beats / min.

Key data: 1000 , 600 , 400

Surface grinders - horizontal ELB perfect BD 10 PLC Second-hand machine overhauled 2014 Surface grinders - horizontal ELB-SCHLIFF perfect BD 10 PLC Second-hand machine Grinding length: 1000 mm Grinding width: 600 mm Workpiece height: 600 mm Table size: 1000 x 600 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 0-35 m / s U/min Total power consumption: 35kW Machine weight approx.: 6 t Space requirement approx.: 3.8 x 2.5 x 2.5 m Part of 2014 overhauled with 12 month warranty Paper machine Magnetic clamping plate 1000 x 600 Automatic dressing device with compensation 1 flange Items put up

Plate filters/layers filter on role Manufacturer: KTM Troxler Type: FP 430 30 filter plates made of plastic DN 25 outlet with valve bottom Filter plate size: 40 cm x 40 cm In very good condition!

Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slap Miller Speed: 500 rpm – 18 fpm Capacity: 1,9 m/dk

Horizontal fraesing machine with swivel vertical frescent head (3510.3), table 315 x 1000 mm, x/y/z = 710/260/420 mm, Sk 40, speed range 45-2000 rpm, feed range 16-800 mm/min, eilgaenge 4 m/min, weight approx. 1.5 t

Surface grinding machine

Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition Nagema wafer cutter 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked

Horizontal grinding machine ELB, magnet 500/350 mm, table 840/350 mm, mesh. No. 140030676

Surface grinders - horizontal ELB-SCHLIFF perfect B-10 SPS Second-hand machine Grinding length: 1000 mm Grinding width: 400 mm Workpiece height: 450 mm Table size: 1000 x 400 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 3.5 kW Table speed: 2-30 m / min Grinding wheel speed: 1500 rpm Magnetic plate size: 1200 x 500 mm Total power: 15 kW Machine weight approx.: 4,5 t Space requirement approx.: 3.5 x 2.5 x 2.5 m General overhauled by 2015 with 12 month warranty Paper machine Magnetic clamping plate 1000 x 400 Automatic dressing device with compensation 1 flange Items put up

Used machine as good as new Grinding length: 600 mm Grinding width: 400 mm Workpiece height: 450 mm Table clamping area: 600 x 400 mm Grinding wheel dimensions: 300x50 mm Grinding spindle motor: 3.5 kW Table speed: 0 - 30 m/min Grinding wheel speed: 0 - 35 m/s Magnetic plate size: 600 x 400 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t Room requirements approx.: 3.5 x 2.5 x 2.5 m 12 month warranty Paper filter machine Automatic table dressing with compensation 1 pc. flange Setting-up elements

Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked

MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control type MORI SEIKI MSC-502. The milling machine has a table size of 500 x 500 mm and processes workpieces weighing up to 500 kg. The travel range of its X, Y, Z axes is 630 x 600 x 650 mm, respectively. The machine spindle rotates at 12,000 revolutions per minute. The milling machine is equipped with a magazine for forty tools with a maximum tool diameter of 150 mm, length 360 mm and a weight of 12 kg. The milling center is offered at a price with different types of holders. Technical parameters of the MORI SEIKI SH-500/40 CNC milling machine - CNC control: MORI SEIKI MSC-502 Travel range: - X axis (table travel length): 630 mm - Y axis (vertical movement of the spindle head): 600 mm - Z axis (cross table movement): 650 mm - distan ...

Overhaul, retrofit, control conversion of all ELB-Schliff grinders with Granitan machine bed. Available with or without enclosure.

OKUMA MACHINING CENTER MODEL: MX-60HB TABLE: 630X630 mm X-AXIS STROKE: 1000 mm Y-AXIS STROKE: 810 mm Z-AXIS STROKE: 800 mm TOOL WAREHOUSE: 150 SEATS CONTROL: OSP-E100M

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

OKUMA MACHINING CENTER MODEL: MA-400HA TABLE: 400X400 mm Nr. PALLET: 2 X-AXIS STROKE: 560 mm Y-AXIS STROKE: 610 mm Z-AXIS STROKE: 625 mm ATTACK: HSS63 TOOL WAREHOUSE: 60 SEATS CONTROL: OSP-E100M

Ilapak stainless flow wrapper Carrera 2000 PC Stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel.

X-AXIS STROKE: 840 MM Y-AXIS STROKE: 860 MM Z-AXIS STROKE: 840 MM TABLE SIZE: 630 X 630 MM TABLE CAPACITY: 1,200 KG SPINDLE POWER: 30/25 KW ROTATION SPEED: 12,000 RPM ATTACHMENT: BT 50 NASOMANDRINO/PALLET DISTANCE: 50-810 MM SPINDLE-PLANK DISTANCE: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAX. WORKPIECE HEIGHT: 1000 MM CONTROL: MSG-502 YEAR OF BUILD: 2002

HORIZONTAL MACHINING CENTER NR. 2 KITAMURA HX500I WITH FATESYSTEM SHUTTLE Features: X-AXIS STROKE: 870 MM Y-AXIS STROKE: 710 MM Z-AXIS STROKE: 660 MM 4TH AXLE (ROTARY TABLE): 0.001-360 ° TABLE: 500 X 500 MM MAX PERMISSIBLE LOAD ON THE BOARD: 800 KG SPINDLE CONE: ISO50 ROTATION SPEED: 12,000 RPM GAMMA CHANGE: 2 GEAR RANGES FAST FEEDS: 50,000 MM/MIN TOOL CHANGE KITAMURA 1:100 SEATS TOOL CHANGE KITAMURA 2:50 SEATS CONTROL: FANUC 16 iM SHUTTLE FASTEM SYSTEM TO 16 STATIONS

COURSE AXIS X: 840 MM COURSE ASSE Y: 860 MM COURSE ASSE Z: 840 MM TAVOLA SIZE: 630 X 630 MM TABLE RANGE: 1,200 KG TABLE INDEX: 1ST MANDRINO POWER: 30/25 KW ROTATION SPEED: 12,000 GIRI/MIN ATTACK: BT 50 NASOMANDRINO/PALLET: 50-810 MM MANDRINO - TAVOLA: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAXIMUM HEIGHT OF THE PIECE: 1000 MM CONTROL: MSG-502 BUILT: 2002

COURSE AXIS X: 840 MM COURSE ASSE Y: 860 MM COURSE ASSE Z: 840 MM TAVOLA SIZE: 630 X 630 MM TABLE RANGE: 1,200 KG TABLE INDEX: 1ST MANDRINO POWER: 30/25 KW ROTATION SPEED: 12,000 GIRI/MIN ATTACK: BT 50 NASOMANDRINO/PALLET: 50-810 MM MANDRINO - TAVOLA: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAXIMUM HEIGHT OF THE PIECE: 1000 MM CONTROL: MSG-502 BUILT: 2002

horizontal conveyor belt with hydromotor

YEAR: 08/2004 LONGITUDINAL CORSA: X 800 MM TRANSVERSE COURSE: Y 700 MM VERTICAL COURSE: Z 700 MM ASSE B INDEXED 1st PALLET (2) 500X500 MM CNC MAPPS MSG-501 TOOL WAREHOUSES 60 LOCATIONS ATTACK MANDRINO BT40 MANDRINO MASSIMA VELOCITY 12000 RPM POWER OF MANDRINO'S POWER 26 KW

Capacity, ton 800 Movable die stroke, mm 180 Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strokes per minute 35 Die dimensions, mm 590 x 220 x 660 Electric motor power, kW 40 Dimensions: mm 6300 x 3900 x 2850 Weight: kg app. 80800

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg