horizontal boring used for sale

Motor power: 7.5kW Center distance: 800mm Center Height: 160mm Auction-ID: A1-40982-18

Control Conventional Power [kW] 22.0 Center height [mm] 315 Bed turning diameter [mm] 630 Carriage turning diameter [mm] 360 Center distance [mm] 6000 Bed width [mm] 700 Spindle bore [mm] 62 Auction-ID: A1-40982-7

grinding length: 450 mm grinding width: 250 mm workpiece height: 275 mm table surface area: 550 x 200 mm distance spindle center to table: max. 400 mm table speeds: 0 - 30 m/min cross feed: 0 - 60 mm/Hub rapid traverse cross: 1,2 m/min grinding wheel size: ø 250 x 30 x ø 51 mm grinding spindle speed: 1400 / 2800 U/min total power requirement: 4 kW weight of the machine ca.: 1 t dimensions of machine L x W x H: 1,55 x 1,23 x 1,80 m Accessories: magnetic plate 450 x 200 mm, grinding wheel with flange, wheel trueing attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mm grinding width: 400 mm workpiece height: 375 mm table adjustment - longitudinal: max. 660 mm table cross movement: max. 410 mm distance spindle center to table: max. 525 mm table speeds: 2 - 28 m/min table load: max. 400 kg cross feed of table intermittent: 3 - 40 mm rapid traverse cross: 1 m/min grinding wheel size: max. 300 x 50 x 76,2 mm total power requirement: 8 kW weight of the machine ca.: 2,1 t dimensions of machine L x W x H: 2,75 x 1,7 x 2,42 m Accessories: magnetic plate 600 x 400 mm, grinding wheel with flange, 1 flange separate, DRO on Y-axis (vertical), wheel trueing attachment, balancing scale, wet grinding attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully automatic side sealing machine UNIVERSA 400 NT Used machine; Year of manufacture 2001 How does it work and stands Description: Fully automatic flow wrapping machine for packaging products – independent length – with full wrapping and without foil overlap. Maximum performance is approx. 40 cycles/min. The product is fed via a conveyor belt at the same time. wrapped in a semi-tubular film over a forming shoulder. The product indexing is done via a horizontally scanning light barrier. The feed belt is set to different product widths can be easily adjusted. After wrapping the product with The foil is cross-welded with a permanently heated welding system. The longitudinal welding is generated by a continuous side welding device. The altitude of the forming shoulder and welding equipment is manually adjustable. The remaining foil strip is picked up on a foil win ...

Power [kW] 30.0 Center height [mm] 500 Bed turning diameter [mm] 1000 Center distance [mm] 3000 Spindle bore [mm] 105 Min. spindle speed [rpm] 2.24 Max. spindle speed [rpm] 450 Auction-ID: A1-40982-3

Technical data Manufacturer: Behringer Type: HBP 220 Design: horizontal metal band saw machine Dimensions L × W × H: approx. 1,900 × 1,100 × 1,800 mm Weight: approx. 1,500 kg Configuration With workpiece clamping device, saw blade protective covers, pressure indicators, adjustable saw feed, separate control console with push buttons, main switch and emergency stop as well as machine light. Remarks The machine comes from a plant closure, was actively used in production until the end and was electrified. Auction-ID: A7-50403-16

With roller stand Auction-ID: A1-44050-196

Control Teach-in Type of control Monforts Control System MTC K Power [kW] 15.0 Center height [mm] 250 Bed turning diameter [mm] 500 Carriage turning diameter [mm] 290 Center distance [mm] 1500 Bed width [mm] 365 Spindle bore [mm] 70 Min. spindle speed [rpm] 2 Max. spindle speed [rpm] 2800 Options Quick change holder, Fixed glasses, Digital readout, Three-claw Auction-ID: A1-40982-137

Automatic lowering. Left and right absent. Demo model; unused! Auction-ID: A1-40982-150

Tested and working. Film available. Loses memory when off power. Parameters are included and can be read in automatically Type of documentation: Operating instructions, Technical data, Parts manual, Electrical diagrams, Control system CNC Power (kw) 30 Bed turning diameter [mm] 30 Center distance [mm] 600 Bed width [mm] 210 Spindle bore [mm] 62 Options: Clamping conveyor, Safaana feed, Three-jaw, C-axis, Driven tools 4 transport collies Auction-ID: A1-40982-54

Center distance: 2000mm Turn diameter over bed: 1050mm Spindle bore: 105mm Motor power: 22kW Max. workpiece weight: 5000kg Includes 4-claw + goggles Machine has been tested, in very good condition Auction-ID: A1-40982-61

With infeed roller conveyor size approx. 605x60x87 cm and roller stand Note: Rack with material not included Auction-ID: A1-50251-7

Technical data Manufacturer: BEHRINGER Type: HBP 260 A Year of Make: 1989 Configuration Horizontal metal band sawing machine with material feed via rollers. Hydraulic workpiece clamping and feed device. Control panel with push buttons, selector switches, emergency stop and main switch. Pressure gauge for pressure display. Protective hoods on both sides of the sawing area. BEHRINGER operating instructions available. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-50403-159

Center height [mm] 275 Bed turning diameter [mm] 550 Center distance [mm] 2000 Bed width [mm] 385 Spindle bore [mm] 60 Min. spindle speed [rpm] 35 Max. spindle speed [rpm] 1600 Options Three-claw, Fixed glasses, Quick-change holder, Digital readout, Four-claw Auction-ID: A1-40982-8

Automatic lowering. Left and right absent. Demo model; unused! Auction-ID: A1-40982-149

Control Conventional Power [kW] 30.0 Center height [mm] 445 Turning diameter bed [mm] 890 Carriage turning diameter [mm] 490 Center distance [mm] 3000 Bed width [mm] 700 Spindle bore [mm] 155 Min. spindle speed [rpm] 3.7 Max. spindle speed [rpm] 1000 Max. workpiece weight [kg] 5000 Options Three-claw, Removable bed, Fixed seat, Quick change holder, Digital readout Swivel diameter removable bed [mm] 1060 Type of digital readout Fagor Auction-ID: A1-40982-136

MEP Shark 320 SXI Duty Horizontal Band Saw – 1999 – Hydraulic – incl. 2× roller conveyor Specifications: Brand: MEP Type: Shark 320 SXI Duty Year of construction: 1999 Version: Horizontal metal band saw machine CE marked Saw tape: approx. 3150 × 27 × 0.9 mm Cutting speeds: approx. 40/80 m/min Saw motor: 2 speeds, approx. 1.5/1.8 kW Total installed power: approx. 4.18 kW Maximum opening of the clamp: approx. 325 mm Working height: approx. 870 mm Machine weight: approx. 770 kg Cutting capacity 0° round: Ø260 mm Cutting capacity 0° square: 250 mm Cutting capacity 0° rectangle: 320 × 200 mm Cutting capacity 45° left round: Ø230 mm Cutting capacity 45° left square: 210 mm Cutting capacity 60° left round: Ø150 mm Cutting capacity 60° left square: 140 mm Cutting capacity 45° right round: Ø180 mm Cutting capacity 45° right square: 160 mm Mitre ran ...

Control Conventional Center height [mm] 240 Bed turning diameter [mm] 480 Carriage turning diameter [mm] 260 Center distance [mm] 1500 Bed width [mm] 370 Spindle bore [mm] 65 Options Removable bed, Quick change holder, Three-jaw Swivel diameter removable bed [mm] 740 Auction-ID: A1-40982-90

Swivel diameter removable bed [mm] 570 Center height [mm] 185 Bed turning diameter [mm] 350 Carriage turning diameter [mm]200 Center distance [mm] 1200 Bed width [mm] 320 Spindle bore [mm] 42 Options: Digital readout, Three-jaw lock, Quick-change holder, removable bed Auction-ID: A1-40982-146

Double mitre metal band saw with Pehu 550 control With inlet roller conveyor dimensions approx. 155x73 cm And removal roller conveyor approx As well as wooden stairs Auction-ID: A1-50251-21

Center distance: 4000mm Center Height: 325mm Turn diameter: 630mm Spindle bore: 80mm Auction-ID: A1-40982-19

Center height [mm] 210 Bed turning diameter [mm] 420 Center distance [mm] 900 Spindle bore [mm] 55 Min. spindle speed [rpm] 4 Max. spindle speed [rpm] 3000 Options Digital readout Type of digital readout Weiler Auction-ID: A1-40982-34

x-travel:1400 mm y-travel:1200 mm z-travel:1350 mm control:MSX- 701 Mapps III table surface area:800 x 800 mm rapid traverse:50 m/min table rotating:360.000 x 0,001 B-Achse ° table load:2,0 t numbers of pallets:2 turning speed range:8000 1/min power capacity - milling spindle:37 kW no. of tools in the magazine:60 Stück tool taper:HSK-A 100 weight:31 t dimensions:5,9 x 3,48 x 3,68 m Equipment: - Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping - Parts program memory 1 MB - Knoll 70 bar high pressure and filter system - Electrostatic oil dust collector LTA - elect. hand wheel - renishaw probe - abso- scale i X/Y/Z- axis - 5 free m- funktions - 48 extra off sets - dual ballscrews on X/Y/Z- axis

x-travel:560 mm y-travel:560 mm z-travel:660 mm control:Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds:20 - 20.000 1/min spindle drive:25/ 35 kW max. torque on the spindle:86 / 130 tool taper:HSK-A63 Number of tool station:60 diameter of tools max.:70 mm Tool diameter with no neighbouring tools:170 mm tool length - max.:450 mm weight of tools max.:12 kg numbers of pallets:2 Pallet dimension:400 x 400 mm max. workpiece diameter:630 mm workpiece height max.:900 mm table load:400 kg rapid travel x/y/z:60 m/min Feed x/y/z:60 m/min internal coolant system feed:70 bar weight of the machine ca.:8,5 t dimensions:3200 x 4800 x 2900 mm Renishaw probe (spindle):Vorbereitung / preparation only Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar. The machine has just received a new milling spind ...

x-travel:630 mm y-travel:600 mm z-travel:650 mm control:MSC 502 (Fanuc 16) Spindle RPM:12000 1/min spindle drive:22 / 18,5 kW rapid travel x/y/z:32 m/min Pallet dimension:500x500 mm numbers of pallets:2 table load:0,5 t working diameter:max. 610 mm Number of tool station:60 BT40 max. tool length:360 mm max. tool weight:12 kg tool changing time:1,3 sec B-axis positioning (non continuous):1 total power requirement:50 kVA weight of the machine ca.:14 t dimensions of the machine ca.:3,3 x 5,8 x 3,2 m spindle load monitor:Typ C This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options: ATC 60 tool stations, High pressure coolant trough spindle interface,

x-travel:630 mm y-travel:630 mm z-travel:630 mm control:Unipro 90 Pallet changer 2x:400 x 500 workpiece - installed height:800 mm max. clampable workpiece diameter:720 - 850 mm spindle taper::SK 40 spindle turning speed - stepless:10 - 8000 1/min Spindle power:20 / 30 kW Spindle Torque:95/143 Nm tool magazin::80 SK 40 total power requirement:55 kW weight of the machine ca.:11 t Machine with Unipro 90 control for 5 axis - twin palette changer - tool magazine 80 HSK-A 63 - coolant device with coolant through spindle 7 pressure levels - full A & B-axis - chip conveyor

x-travel:630 mm y-travel:630 mm z-travel:500 mm number of spindle speeds:0 - 15000 spindle motor:32 kW size of pallet:500 x 500 mm b-axis:36000 x 0,001 ° no. of workpieces in the magazine:61 Stück tool taper:HSK 63 weight of the machine ca.:15 t Single-Spindle Mechanical processing cylinder head VR6

x-travel:1000 mm y-travel:800 mm z-travel:1100 mm weight of the machine ca.:20 t dimensions of the machine ca.:6,80 x 3,0 x 3,20 m Tool bore:SK50 Tool taper:HSK-A 100 turning speed range:45-6.000 U/min size of pallet:630x800 mm change time of pallets:21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to

x-travel:1000 mm y-travel:800 mm z-travel:1100 mm weight of the machine ca.:15,2 t Tool bore:SK50 Tool taper:HSK-A 100 turning speed range:45-6.000 U/min size of pallet:630x800 mm change time of pallets:21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to

spindle speed::max. 12000 tool taper:HSK 80 . b-axis:360 x 0,001 ° worktool support (A-axis):+40 / -95 ° weight of the machine ca.:25 500 Kgs. x-travel:800 mm y-travel:700 mm z-travel:630 mm dimensions of the machine ca.:6200 x 3000 x 3200 mm pallet size::500 x 500 mm no. of tools in the magazine:61 Nos. Weight approx.:23,5 t Horizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition. Single spindle

x-travel:2000 mm y-travel:1600 mm z-travel:1140 mm b-axis:0.0001° x 360° ° number of pallets:4 table surface area:1000 x 1450 mm max. table load:6.000 kg turning speed range:4 - 10000 U/min power capacity at 100 % load:40 kW kW tool taper:HSK100 DIN69893A machine weight ab.:63.000 kg space required L x W X H:12320 x 11000 x 4700 mm incl. 50 x HSK100 tool tapers

x-travel:760 mm y-travel:760 mm z-travel:760 mm b-axis:360.000 x 0.001 ° spindle drive:26 / 18,5 (40% / 100%) kW spindle turning speed range:50 - 15000 U/min Tool bore:KSK-A63 max. table loading capacity:500 kg total power requirement:43 kW weight of the machine ca.:11,5 t dimensions of the machine ca.:2,7 x 4,73 x 2,87 m

max. wheel diameter:80/120 mm max. module:2,5 max. top circle diameter:65 mm :22 mm :140 mm :120 mm slide travel axial ( Z-axis ):320/400 mm Dimensions (L/W/H):3270 x 3240 x 2020 mm weight of the machine ca.:6 t P60 - The compact all-rounder for wheels, shafts and worms The P60 is the smallest machine in the Gleason line of horizontal hobbing machines. The all-rounder not only mills spur gears with all rollable profiles, but is also the optimal solution for machining steering pinions and worms. with automatic loading system, extraction unit, chip conveyor, with balancing device with 2 tailstocks, with Artec process monitoring system, type CTM-BT1.1

x-travel:450 mm y-travel:450 mm z-travel:450 mm b-axis:360.000 x 0.001 ° main spindle speeds::45-10000 1/min weight of the machine ca.:14 t dimensions of the machine ca.:7 x 2.45 x 3.4 m size of pallet:320 x 320 mm number of spindles:2 tool taper:HSK63 tool numbers:2 x 40 spindle drive motor:25/36 (100% / 40% ED) kW Double spindle 4-axis machining center Horizontal 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site  ...

grinding length:450 mm grinding width:250 mm workpiece height:280 mm Table area:760 x 250 mm grinding spindle drive:2,5 kW grinding wheel dia. x width:250x 25 mm grinding spindle speed:1430/2900 U/min way of grinding spindle saddle, vertical:400 mm total power requirement:4,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:1,8 x 1,4 x 2,0 m Machine equiped with magnetic plate - dresser

grinding length:450 mm grinding width:250 mm workpiece height:280 mm Table area:760 x 250 mm grinding spindle drive:2,5 kW grinding wheel dia. x width:250x 25 mm grinding spindle speed:1430/2900 U/min way of grinding spindle saddle, vertical:400 mm total power requirement:4,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:1,8 x 1,4 x 2,0 m Machine equiped with magnetic plate - dresser

honing diameter:51 mm stroke:300 mm spindle speeds::600 - 3000 U/min feed range:1500 - 5000 mm/min spindle drive:1,1 kW weight of the machine ca.:0,8 t total power requirement:4 kW dimensions of the machine ca.:1,1 x 1,9 x 1,5 m

x-travel:1300 mm y-travel:1100 mm z-travel:1000 mm spindle turning speed range:10 - 10000 U/min numbers of positions in the tool changer:80 spindle taper::MAS BT 50 size of pallet:800 x 800 mm number of pallets:2 total power requirement:65 kVA weight of the machine ca.:24 t The machine needs to be taken out of production at short notice: SPECIAL PRICE ?34,000 net EXW. The MAZAK FH8800 is a robust horizontal CNC machining centre designed for the precise and productive machining of large workpieces. The machine features travel ranges of 1,300 × 1,100 × 1,000 mm, two 800 × 800 mm pallets and a high-performance spindle running at 10,000 rpm. Technical specifications ·Travel ranges (X/Y/Z): 1,300 / 1,100 / 1,000 mm ·Pallet size: 800 × 800 mm ·Number of pallets: 2 ·Spindle speed: 10,000 rpm ·Control system: Mazatrol 640 M CNC ·Tool holder: BT50 ·Tool magazine: Chain magazine ·High ...

cutting diameter:430 mm saw band length:5800 mm cutting width:54 mm total power requirement:11 kW weight of the machine ca.:2,1 t dimensions of the machine ca.:ca. 4,10 × 2,30 × 2,10 m Behringer HBP 430N ? Robust double-column band saw for professional use The HBP 430 N is a high-performance horizontal double-column band saw designed for industrial use, offering impressive cutting precision, robust construction and reliability. It is ideally suited for use in mechanical engineering, steel construction, metal fabrication, as well as in manufacturing and metalworking workshops. With a cutting range of up to Ø 430 mm or 600 × 430 mm at 90°, both solid material and tubes and sections can be processed cost-effectively. A working area of 320 × 430 mm is available for mitre cuts up to 45°. The infinitely variable cutting speed, ranging from 17 to 110 m/min, allows for optimum adaptation  ...

honing diameter:45-200 mm stroke:330 mm centre height:350-700 mm Motor output:1,5 kW Drill rods: Ø 60mm ? 3000mm long Ø 50mm ? 2600mm long Ø 42mm ? 1920mm long Ø 40mm ? 1920mm long Ø 26mm ? 1270mm long Ø 24 mm ? 1,000 mm long Ø 20 mm ? 2,000 mm long Typical features Feed: Infinitely variable in both directions Drive: Separate control of spindle rotation and vertical movement Centring: Manual or via dial gauge centring bridges Geometry & working range (approximate values based on the BO series) Drilling range (Ø): approx. 24 mm to 150 mm (depending on the drill rods and cutter heads used) Distance from table to centre of spindle: Variably adjustable (typically approx. 350 mm to over 700 mm for large commercial vehicle engine blocks)

x-travel:800 mm y-travel:690 mm z-travel:630 mm total power requirement:76 kW weight of the machine ca.:25,5 t b-axis:630 Rundeinheit control:Siemens 840 D workpiece weight:max . 1.100 kg spindle turning speed range:15000 U/min Boring power:30 mm plate size:630 x 630 mm Dimension:6000 x 2900 x 2400 mm spindle taper::HSK 63 Documents:vorhanden

x-travel:60 mm The RIMAC BETAMATIK is a specialised collector mica milling machine for the manufacture and repair of electric armatures and commutators. It is used for the precise milling or undercutting of the mica insulation between the individual copper lamellae of a collector. The mica joints are detected by a laser optical system. A stepper motor then automatically positions the armature from lamella to lamella. The milling cutter is automatically raised during the return stroke. According to the data sheet, the machining time is approximately 0.8 to 1.3 seconds per lamella. The machine can process armatures up to a diameter of 100 mm, collectors up to 70 mm in diameter and shafts up to 500 mm in length. The maximum milling length is 60 mm. The milling spindle reaches 8,000 rpm. The machine, originally purchased around 1983/1984, was extensively modernised and mechanically overhaule ...

x-travel:600 mm y-travel:580 mm z-travel:580 mm numbers of pallets:2 pallet size::400 x 400 mm max. workpiece weight:400 kg spindle taper ISO:40 spindle speeds::35 - 12000 feed speeds:1 - 50000 mm/min rapid speed:50 m/min total power requirement:25 kW weight of the machine ca.:12 t dimensions of the machine ca.:3,6 x 3,6 x 2,9 m with CNC SEICOS 16 M ( FANUC base ) autom. toolchanger 61-pockets pallet indexing 1° chip conveyor and coolant attachment exhauster clamping cube and diverse toolholders

x-travel:1800 mm y-travel:1600 mm z-travel:1400 mm B-axis (table):360° size of pallet:1000 x 1250 mm workpiece swing dia.:2100 mm workpiece weight:3500 kg spindle taper ISO:50 spindle drive motor:37 kW spindle turning speed range:25 - 10000 U/min feed range:40/50 m/min rapid power traverse circular:10 U/min total power requirement:90 kVA weight of the machine ca.:43 t dimensions of the machine ca.:11 x 9 x 4,5 m Machine with SIemens 840 D control for 4 axis - full B-axis - palette changer - tool changer for 150 tools - coolant device with coolant through spindle - chip conveyor

x-travel:630 mm y-travel:630 mm z-travel:630 mm pallet size::400 x 500 mm spindle taper::HSK 63 spindle turning speed - stepless:10 - 16000 U/min total power requirement:55 kW weight of the machine ca.:11 t Machine with SIEMENS 840 D control for 4 axis - digital drives - palette changer 4-fold - tool changer 160-fold - coolant device with coolant through spindle - full B-axis - chip conveyor - hydr. workpiece clamping