horizontal boring milling used for sale

A walk-in CNC 5-axis large-format portal milling machine Fooke is available. Travel X/Y/Z: 3000mm/2500mm/1150mm, bridge height: 800mm, table dimensions X/Y: 3000mm/2500mm, spindle power: 28kW, spindle speed: 16000rpm, swivel range A: +/-100°, rotary range C: +/-181.5°, feed rate: 15m/min, rapid traverse X/Y: 20m/min, rapid traverse Z: 10m/min, rotary speed A/C: 8rpm, tool holder: HSK-63A. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/5200mm, weight: approx. 50000kg, control: Siemens 840D powerline. Documentation available. On-site inspection is possible.

Travel X/Y/Z: approx. 600mm/525mm/500mm, table dimensions X/Y: 1000mm/550mm, max. table load: 350kg, tool holder: SK40, speed: 12000rpm, tool positions: 25, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2900mm/2000mm/2300mm, weight: approx. 4500kg, control: Heidenhain, operating hours: approx. 87955h, spindle hours: approx. 21800h. Documentation available. On site inspection is possible.

Used machine CNC machining center horizontal Manufacturer:DMGMORI Type:NH4000DCG Year of construction:2021 Control Type:FANUC F31iB Origin: Japan Location:Germany Delivery Time Technical data Traversing range X-axis approx. 560mm Y-axis approx. 560mm Z-axis approx. 630mm Table 360° 1° Workpiece diameter approx. 630mm Workpiece weight max. approx. 400kg Speed max. approx. 14,000 rpm Spindle motor approx. 18.5/11KW Number of tool positions approx. 40 Rapid traverse approx. 50m/min Mounting Taper BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 34kVA Footprint L x W x H approx. 2,360×3,914x2,711m Machine weight approx. 9,600 kg Automatic Rotary APC Tool Holder: BT40-Max. Spindle speed 14,000 min-1,-18.5/11 kW (10min/100% ED)-Number of Tools: 40 (Chain Type)-Table Indexing 1° Scraper Belt Conveyor with drum filter preparati ...

Horizontal BAZ DMG MORI NHX 4000 with 2-fold pallet changer Year of Make: 2017 Control: Celos with Sinumerik 840Dsl Operate Program running hours: 21,000h Technical data: Spindle speed: 10 - 20,000 min-1 (motor spindle speedMASTER)® Drive power: 35/25 KW Torque: 130/85 Nm Tool holder: HSK 63 Number of magazine slots: 60 - Ring magazine Travels: X-axis: 560mm Y-axis: 560mm Z-axis: 660mm C-axis: 0.001° Pallet size: 400x400mm Accessories: 2-fold pallet changer Coolant system for IKZ 70bar Chip conveyor Renishaw 3D - Pushbutton

Key data: 800 mm, 650 mm, 550 mm

Universal Machining Center Deckel Maho DMU 80T Year 2000 Control: Heidenhain Running hours: ~ 1,600h Technical data: Spindle speed: 0 - 6,300 min-1 Torque Spindle: Tool holder: SK 40 Number of magazine slots: 24 X-axis: 800mm Y-axis: 650mm Z-axis: 550mm Accessories: - Coolant system - 30 SK 40 tool holders - 1x Machine Vise Machine is in very good condition. Has been used only a little

Horizontal machining center Okuma MB 500H with 2-fold pallet changer Year of Make: 2005 Control: Okuma OSP E100M Technical data: Spindle speed: 10 - 15,000 min-1 Drive power: 26 KW Tool holder: BT 40 Number of magazine slots: 60 IKZ: 70 bar Routes: X-axis: 800mm Y-axis: 800mm Z-axis: 800mm 4th axis: index 1° Number of pallets: 2 Pallet size: 500x500mm Accessories: - Coolant system type ConSep 2000 from Mayfran - Chip conveyor Mayfran type ConSep from Mayfran - Tool breakage monitoring in the magazine - Workpiece coolant shower

gebr. Cover FP3 NC, built in 1983 in neat condition: Travel X: 400 mm, Y: 400 mm, Z: 400 mm Table size approx. 700 × 460 mm Tool holder SK 40 Spindle motor power typ. 2.0 – 3.0 kW Feed speed approx. 2 – 3,600 mm/min Rapid traverse up to approx. 4,000 mm/min Total weight approx. 1,800 – 2,000 kg Power supply / connection 380 V three-phase current Control Dialog 2

From now on we can arrange the following services for you! ✔ CAD/CAM programming Experts support you in programming your components – from the simple 2D contour to complex 5-axis simultaneous machining. We work with market-leading CAD/CAM systems and optimize your programs for maximum efficiency. ✔ Cost-per-part calculation We analyze your components with regard to cost-effectiveness. Together we determine your unit costs and help you to make optimal use of the machine and processes. ✔ Feasibility studies Before purchasing, we check the technical feasibility of your applications. How to get Certainty that the machine meets your requirements and that your production is sustainable supported. ✔ Programming Training Our training courses are aimed at beginners as well as advanced learners and are individually tailored to Adapted to your requirements. How to en ...

Travel X/Y/Z: 600mm/400mm/420mm, feed rate X/Y/Z: 6m/min, rapid traverse: 6m/min, spindle power: 8kW, speed: 4500rpm, quill stroke: 75mm, table dimensions X/Y: 900mm/450mm. Machine dimensions X/Y/Z: approx. 2800mm/2200mm/2100mm, weight: approx. 2800kg, control: Heidenhain 415B, hours: approx. 56193h. Includes cooling lubricant system and 3D measuring probe. The brake of the Z axis is to be replaced. Documentation available. An on-site inspection is possible.

Used machine Universal Machining Center Machine type: DMG DMF 360 / 11 linear Control: Heidenhain TNC 640 Celos Year of Make: 2017 TECHNICAL DATA: Travels: X-axis: [mm] 2,600 Y-axis: [mm] 1,100 Z-axis: [mm] 900 B-axis C-axis Number of controlled axes: 5 Dynamic Pack for DMF 360 linear (Y1100) Rapid traverse: (X/Y/Z) [m/min.] 80 / 60 / 60 Speed range: [1/min.] 20 - 15,000 Drive power: [kW] 46 / 30 Tool holder: SK 40 Tool Changer Tool positions: 60 NC rotary table Table size: [mm] 3,200 x 1,100 Max. table load: [kg] 1,200 Features: Internal cooling (IKZ): [bar] 40 Coolant tank: [l] 600 Chip conveyor Chip rinsing gun Oil mist extraction Air through spindle center Probe Spindle Preparation for use 3D quickSet Automatic doors Electronic handwheel This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

The machine is in good technical condition, after prior agreement it is possible to test it. The machine has been out of operation for about a year. Regular branded service worth €5,000 (we can document it) was last performed at the end of 2023, after which the machine was in limited operation. It is necessary to determine the condition of the screws and repair it if necessary. It is necessary to calibrate the 5-axis indexer. The spindle makes a loud noise.

Inv. Num. : 8953 Type: MULTICUT 500i S Producer: MAS Created: 2011 Parameters: Control system: Siemens SINUMERIK 840 D Maximum turning diameter: 690 mm Max. turning length: 1527 mm Maximum milled profile: 486 x 486 mm Maximum spindle speed: 3500 1/min Maximum workpiece weight: 1600 kg Axis X: 640 mm Axis Y: 370 mm Axis Z: 1600 mm Length: 5400 mm Width: 3950 mm Height: 3760 mm Weight: 22000 kg

Technical data: Travel X/Y/Z: 700 / 250 / 430 mm Top slide travel: 630 mm Spindle speeds: 45 - 1660 1/min Spindle holder: SK 40 Control: conventional Feed table: 24 - 402 mm/min Milling head rotatable: 360° Table size: 1120 x 260 mm Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (WxDxH), approx.: 1600 x 1700 x 1700 mm Weight, approx.: 1200 kg Equipment: - Digital display - Machine light - Coolant device - Machine shoes

MIKRON WF 3 DCM Universal Milling Machine Heidenhain TNC 151 control Table 800x380 mm x-travel 500 mm y-travel 500 mm z-travel 400 mm speed range 3150 rpm drive power 4 kW SK 40 Weight 1700 kg Many Accessories and tools

Used machine Machine Type: CNC Machining Center Vertical Model: NVX5100 2nd with Matris robot cell Manufacturer: DMGMORI Control:DMG MORI Celos Year of construction / Ib: 2019 / 2022 #001312 Technical data Travel range X-axis approx. 1050 mm Y-axis approx. 530 mm Z-axis approx. 510 mm Table size approx. 1,350x600 mm Workpiece weight max. approx. 1,200 kg Speed max. approx. 12,000 rpm Spindle motor approx. 37/22 KW Number of tool positions approx. 30 Rapid traverse approx. 30 m/min Mounting cone approx. BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 45 kVA Footprint L x W x H approx. 3.1 x 2.85 x 2.6 m (without chip conveyor, without robot) Machine weight approx. 7,300 kg Main Drive with Higher Torque - Tool Holder Cone for BT-40 Tool Holder - Tool magazine with 30 places (#40) - Door for tool magazine - Hinged belt conveyor  ...

MAHO MH 1000 C CNC Vertical Milling machine Serial No. 11536 Control CNC Philips 432 Table dimensions 800 x 1.000 mm Cross travel (Y) 600 mm Longitudinal travel (X) 1.000 mm Vertical travel (Z) 800 mm Spindle taper ISO 50 P.D.B. Speed 20-4000 rpm Auto feed 1-4000 Rapid (mm) 10000 Power kW 22 Weight 7.200 kg With assembled copy device. Many Accessories and tools

Used HERMLE UWF 1202 S Universal Tool Barrel and Drilling Machine CNC control HEIDENHAIN TNC 426 Technical data: Travels X-axis 850.0 mm Y-axis 630.0 mm Z-axis 500.0 mm Rapid traverse 10 m/min Table length 1200.0 mm Table width 550.0 mm Max. spindle speeds 20 - 4200 rpm Spindle motor power 7.0 kW Tool holder SK 40 Coolant 120 liters Total connection 16 KW Dimensions 3.3 x 2.4 x 2.4 m Space requirement 5.0 x 4.2 m See still under power

Manufacturer: Avian Model: G60/150-R5-S2 (Screen size 25mm) Working witdh: 600mm x 1500mm Knives: DC53 58-60HRC Bearking: SKF Weight: 8000kg - The machine was in use only for a few months and was afterwards fully refurbished. - It comes with a newly built (unuesed) cabinet with Siemens components and new spare knives. Find more here - / Contact us at -

Used machine Machine Type: CNC Machining Center Vertical Model No.: CMX1100V Manufacturer: DMGMORI Control:DMG MORI SLIMline® Multi-Touch Heidenhain Year of Make: 2022 #001358 Options: - Main spindle 12,000 rpm 13/9kW SK40 - Tool holder BT 40 for tightening bolts DIN 69872 - Direct position measuring system X-Y-Z - Magazine with 30 tool positions - Coolant supply through spindle (IS) bar 20 - Double switching filter - Coolant-blown air switching externally via M-function - Chip conveyor (scraper belt, left side) - Tank capacity left side chip conveyor 250 - Coolant spray gun for chip removal - Automatic cab roof - Signal light - Electronic handwheel - Button kit spindle and table Traversing range X-axis 1100 mm Y-axis 560 mm Z-axis 510 mm Table size approx. 1400 x 560mm Workpiece weight max. approx. 1000kg Rapid traverse X / Y / Z 30 m/min Footprint L x ...

Key data: 3000 mm, 4000 mm, 1500 mm

Heyligenstaedt Heynumill 2700-PF 3/5 axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Hsbi Ssyaazmsf Iwxonh Control Heidenhain TNC 430 X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm At Heynumill, the complete hydraulics were renewed in 2018, all electrical cables were replaced, the spindle cooling unit, both longitudinal conveyors were renewed and the heads were completely overhauled. The entire repair cost €160,000. In 2020, the milling gear was renewed.

CNC lathe TAKAMAZ EX 20 / Fanuc 15 TF -Control FANUC 15 TF -Turning diameter max. 260mm -Turning length approx. 500mm -Rod passage 42mm -Spindle speeds 40 - 4000 rpm -Spindle nose A2-6 -Tool positions (stations) 12 compartment / direct mount -Tool measurement (Tooleye) -Parts catcher -Tailstock -Collet holder 173 E -Spindle motor 7.5 KW Dimensions: LxWxH 2.6x2x1.8 meters / Weight : 2800 kg

Tool milling machine DECKEL FP 2 LB 3 axis digital display maintained original condition - 3-axis digital display - Travel X/Y/Z: 795 × 300 × 400 mm - Automatic feeds and rapid traverses in all 3 axes (18 stages) - Spindle speeds: 40–2000 rpm (18 steps) - Horizontal and vertical milling equipment - ISO 40 tool holders - Table clamping surface: 1000 × 440 mm - Swivelling vertical head with drilling quill - Coolant device - Various tool holders - Documentation available L×W×H 2.5×2.4×1.8 meters / Weight 2200Kg

TSUGAMI MA 3 H - 10P Horizontal Machining Center 10 - Compartment Pallet Changer -Control FANUC 11-M -Travel X/Y/Z 340x260x400mm -10 - Compartment pallet change -B - Axis 360 DEGREES -Indexing 0.001mm -Speed range 36-5000 rpm -Feed range 1-6000 mm/min -Rapid traverses 12/meter-min -Tool holder BT 40 -Double-arm gripper -Tool magazine 62 stations -Drive power / spindle motor 7.5 KW -Electronic handwheel -Chip conveyor -Central lubrication -Coolant device -RS 232 data interface -Spindle oil cooler -Documentation Dimensions: LxWxH 4x2.4x2.4 meters / Weight 7000Kg

EUMACH MC 1050 P vertical machining center -CE marking -Built in 1999 -Heidenhain 426 -Fourth axis NIKKEN CNC 170 ZA / programmable directly from the controller -Oil cooler -Complete documentation -COMPLETE TECHNICAL DATA - SEE PHOTOS Dimensions: LxWxH 2.8x3.45x2.8 meters / Weight 6500Kg

Used machine Universal Machining Center Machine type: DMG MORI CMX70U 3+2 Control: Heidenhain TNC 620 Year of Make: 2021 #001350 TECHNICAL DATA: 5. Axis 3 + 2 axes non-simultaneous X-axis: [mm] 750 Y-axis: [mm] 600 Z-axis: [mm] 520 Rapid traverse: (X/Y/Z) [m/min.] 30 Max. speed: [1/min.] 12,000 Drive power: [kW] 13 Torque: [Nm] 82 Tool holder: HSK63 Tool positions: 60 NC swivel rotary table B-axis -10° / +95° C-axis 360° Table size: [mm] 800 x 620 Max. table load: [kg] 350 Space requirement (LxWxH): [m] 5.35 x 4.14 x 3 Machine weight: [kg] 4,700 Features: Chip conveyor Internal cooling (IKZ):40 [bar] Tool breakage detection Heidenhain TS 27 R Probe Heidenhain Blum Lasers for Tools Direct Path Measurement System Electronic handwheel Machine preparation for DMG MORI PH 150 - Automatic lifting door on the right - Robot interface (DMG MORI standard) - ...

TOS FNGJ 40 tool milling machine with 3-axis Heidenhain digital display -Travel X/Y/Z 600x400x400mm -Automatic feeds + rapid traverses in all three axes -Spindle speeds of 63-3150 rpm -Tool holder ISO 40 -Hydraulic tool clamp -Angle table 800x400mm -Vertical - Horizontal milling device -Vertical head swivel with quill -Coolant device -Tool trolley + tool holders + milling tool -Counter bearing + horizontal milling spindle -Clamping block for tool holders -Machine feet -Documentation Dimensions: LxWxH 2.5x2x2.3 meters / Weight 2600 kg

Tool milling machine DECKEL FP 2 LB from university in well-maintained original condition -3 - Axis digital display "ACURITE" -Travel X/Y/Z 795x300x400mm -Automatic feeds / rapid traverses in all 3 axes (18 pieces) -Spindle speeds 40-2000 rpm (18 pieces) -Horizontal + vertical milling device - ISO 40 - Tool holders -Table clamping surface 1000x440mm -Table clamping surface with additional table 1000x700mm -Vertical head swivel with drilling quill -Coolant device -Various tool holders -Machine light -Documentation Dimensions: LxWxH 2.5x2.4x1.8 meters / Weight 2200Kg

Used machine Universal Machining Center Machine type: DMG MORI CMX70U 3+2 Control: Heidenhain TNC 620 Year of Make: 2021 #001350 Optimal area of application. Bearing seats on long shafts, crankshaft bearing seats, balancer shafts, etc. TECHNICAL DATA: Max. turning length: [mm] 1,055 Turning diameter: [mm] 120 Max. Rotary Ø over bed: [mm] 285 Rapid traverse: (X/Z) [m/min] 20 Main spindle Max. speed: [1/min.] 3,500 Drive power: [kW] 7.5 / 5.5 Bar Passage: [mm] 43 Spindle Nose: A2-6 Number of turrets: 2 Tool positions: 6 + 6 Tool holder: Capto Tailstock This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Inv. Num. : 8965 Type: FSQ 80 NC Producer: TOS Created: 1989 Parameters: Control system: HEIDENHAIN NS 700 Work table length: 3000 mm Work table width: 800 mm Maximum vertical spindle speed: 2500 1/min X-axis travel: 3000 mm Y-axis travel: 900 mm Travel Z axis: 1000 mm Machine height: 3500 mm Machine length: 5660 mm Machine width: 4400 mm Machine weight: 18000 kg

Used machine Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of Make: 2008 TECHNICAL DATA: Travels: X-axis: [mm] 750 Y-axis: [mm] 600 Z-axis: [mm] 560 Feed: (X/Y/Z) [m/min.] 90 Rapid Traverse: (X/Y/Z) [m/min.] 90 / 90 / 90 A-axis -10 B-axis +110 C-axis 360° Speed range: [1/min.] 28,000 Tool Changer Tool holder: HSK-A63 Tool positions: 60 Tool diameter: [mm] 80 / 140 Tool length: [mm] 300 NC rotary table Ø 750 Max. table load: [kg] 800 Table size: [mm] fixed tabe: 950 x 650 Max. table load: [kg] 1,000 Features: Chip conveyor This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

The machine is in good technical condition, testing is possible by prior arrangement.

I'm selling parts for a Brother TC-31A pallet milling machine (year 2000). All components are available, including: - indexers (4th axis), - screws and mechanical components, - electronics modules, - motherboards, - tool magazine, - motors, - servos, - and many other components. For pricing on individual parts, please contact me.

A Haas CNC vertical milling center is available. Travel X/Y/Z: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, max. table load: 1500kg, rapid traverse: 25m/min, feed rate: 16m/min, tool stations: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. An on-site inspection is possible.

I'm selling a Mazak FH-4800 pallet machining center. The machine is in very good condition. The spindle and axes operate quietly. A chip extractor and coolant tank are included. Machine parameters: X-axis travel: 560 mm Y-axis travel: 610 mm Z-axis travel: 560 mm Rotary table: 360/1 degrees Mazatrol PC Fusion CNC 640 M control Table length: 400 mm Table width: 400 mm Max. workpiece weight: 400 kg Tool magazine: 40 Spindle taper: SK40 Max. spindle speed: 12,000 rpm Spindle motor power: 22 kW Length x width x height: 2680.0 x 4160.0 x 2635.0 Weight: 9400 kg

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mMovement X / Y / Z600/560/510 mmRapid feed X / Y / Z30/30/30 m/minSpindle taperSK 40 DIN 69871 Tool Magazine with60 PositionsMax. torque82 NmTorque (100% DC)54 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMaximum load (table centre)600 KgWeight approx.5300 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 40 barProduction Package 40 bar Optio ...

Used parts: Milling shaft / 2-speed gearbox SelectaTilth / Final drive: gears, chain, side cover, cork seal etc.

for spare parts. Machine is out of service. Processor card removed

Travel X/Y/Z: 1400mm/630mm/600mm, table dimensions X/Y: 1800mm/630mm, maximum workpiece weight: 1000kg, spindle taper: ISO50, speed: 2800rpm, torque: 1600Nm, spindle drive: 15kW, machine dimensions X/Y/Z: approx. 3450mm/4300mm/2300mm, weight: approx. 5850kg, documentation available, an on-site inspection is possible.

The machine is in good technical condition, testing is possible by prior arrangement.

Comec FXT double-sided milling machine Number of milling units 4 Generator system: Right/Left/Up/Top Power of milling units 4×0.85kw Rotational speed 12000rpm Feed speed adjustable by variator

Manufacturer NICOLAS CORREA Model FP 35 UAGA Year 2006 CNC HEIDENHAIN iTNC-530 Table surface 4,500 x 1,500 mm Allowable weight on table 15,000 kg. Travel (X / Y / Z) 3,500 / 2,600 / 1,000 mm Pitch between uprights 2,300 mm Fast Forward Axles (X) 15,000 mm/min Fast Forward Axles (Y, Z) 12,000 mm/min Maximum Working Advance 5,000 mm/min UAGA Orthogonal Automatic Head INCLUDED Head with Automatic Rotation 2, 5º /2.5º Speed of the UAGA Orthogonal Head 3,000 r.p.m. ISO-50 Head Cone Main Motor Power 22 kW No. of Speed Ranges 2 Direct Output Head INCLUDED Head Speed Direct Output 5,000 r.p.m. Automatic Retractable Support l on the Right side for Orthogonal UAGA INCLUDED Automatic Retractable Support l on the Left for Direct Exit Head Cover. INCLUDED Automatic head pickup INCLUDED Automatic tool loader INCLUDED Loader positions 30 HEIDENHAIN HR 410 Portable Button Pad  ...

Cross milling machine Bartezaghi 2BE 250 Spindle length 240 mm Maximum milling height 250 mm Spindle diameter 40 mm Spindle speed 5600 RPM 9kw motor Pneumatic material pressure Desktop control

Offer 26048 Technical data: - 3 sides – machining in one clamping for lock and PZ punches, - etc. to be milled out in aluminium / plastic / steel profiles - Operation via two-hand lever - Material clamping by pneumatic clamping cylinder - Manual profile bar turning device for 3-sided machining - Working range - x (landscape) 250 mm - depending on position - y (longitudinal) 90 mm - depending on position - z (vertical) 120 mm - max. Profile height depending on position approx. 120 mm - max. Profile depth 100 mm - Spindle speed approx. 6000 + 12000 rpm - Pneumatic connection 8 bar - Drive 400 V / 1.5 kW - Space requirements approx. W 650 x H 1550 x D 850 mm - Weight approx. 340 kg

Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg

Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Stankoimport, universal milling head from milling machine 6P / 2 -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Stroke: 72 mm -Electric motor: see photo nameplate -Transport dimensions: 940/560 / H500 mm -Weight: 304 kg

End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool, cutter head -Handover: in its current condition as inspected -Cutting board: partially slightly damaged, see photos -Reversible plates: mostly missing, see photos -Type: 45-PP-160-140-10 Ø 160 mm 3 pieces -Type: 45-PP-125-113 Ø 125 mm 1 piece -Type: 45-PP-125-113-9 Ø 125 mm 1 piece -Type: 90-PP-100-22-8 Ø 100 mm 2 pieces -Type: 75-PP-080-37-6 Ø 80 mm 1 piece -Type: 75-PP-080-37 Ø 80 mm 1 piece -Dimensions: 395/295/H145 mm -Weight: 29 kg

Universal milling head, milling chuck, milling extension, angle milling head, universal angle milling head, milling angle head -Manufacturer: TOS, Universal milling angle head from TOS FB25-V milling machine -Recording output: SK50 -Recording: Input gear -Milling head: fully swivelling -Stroke: 55 mm -Recess recording: mm -Bolt circle: mm -Transport dimensions: 780/490/H430 mm -Weight: 224 kg

Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Waldrich -Spare part: comes from a milling machine -Milling head: swiveling -quill stroke: 150 mm -Spindle mount: SK50 -Motor: 11 kW 1470 rpm -Spindle speed: 25 - 560 rpm -Transport dimensions: 1550/600/H460 mm -Weight: 636 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Milling unit: unfortunately no type designation -Motor: 2x Holz-Her 2200 W / 2800 rpm -Drive belt: not included -Motor block: dimensions 400/340/300 mm -Milling unit: 530/440 / H300 mm -Weight: 81 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, finishing unit, buffing unit -Manufacturer: Homag, 2 milling units and 2 buffing units from BRANDT KS 25 edgebanding machine -buffing units: motor KMER 0.18 kW 1360 rpm -Polishing roller: Ø 145 mm, height and depth adjustable / swiveling -Milling units: Motor Perske / Homag, see photos of nameplates -Voltage: 220 V / 200 Hz -Price/Fee: complete -Overall dimensions: 1200/800/H590 mm Total weight: 175 kg