horizontal boring milling used for sale

Plate filter with pump Manufacturer: Rover Pompe Type: Colombo Field of use: Olive oil Filter plates: 25 PCs. End plates: Stainless steel Sheet size: 20 cm x 20 cm Pump: Capacity: 28 l / min Conveying height: 22 m Water temp. Max: 35 ° C In very good condition! Plate filter incl. new replacement filter plates and replacement filters!

Bei Fragen: 01718367957

Capacity 85 beats / min.

Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg

Key data: 1000 , 600 , 400

Surface grinders - horizontal ELB perfect BD 10 PLC Second-hand machine overhauled 2014 Surface grinders - horizontal ELB-SCHLIFF perfect BD 10 PLC Second-hand machine Grinding length: 1000 mm Grinding width: 600 mm Workpiece height: 600 mm Table size: 1000 x 600 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 0-35 m / s U/min Total power consumption: 35kW Machine weight approx.: 6 t Space requirement approx.: 3.8 x 2.5 x 2.5 m Part of 2014 overhauled with 12 month warranty Paper machine Magnetic clamping plate 1000 x 600 Automatic dressing device with compensation 1 flange Items put up

with palletech Table size 800 x 800 mm Table NCRT Number of pallets 14 Movement x-Axis 1300 mm y-Axis 1100 mm z-Axis 1000 mm Table indexing 0,001° Number in tools in magazine 237 pieces Maximum spindle speed 35-7.000 min Tool taper DIN 69871A-50 CNC control M-plus

Surface grinders - horizontal ELB-SCHLIFF perfect B-10 SPS Second-hand machine Grinding length: 1000 mm Grinding width: 400 mm Workpiece height: 450 mm Table size: 1000 x 400 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 3.5 kW Table speed: 2-30 m / min Grinding wheel speed: 1500 rpm Magnetic plate size: 1200 x 500 mm Total power: 15 kW Machine weight approx.: 4,5 t Space requirement approx.: 3.5 x 2.5 x 2.5 m General overhauled by 2015 with 12 month warranty Paper machine Magnetic clamping plate 1000 x 400 Automatic dressing device with compensation 1 flange Items put up

Used machine as good as new Grinding length: 600 mm Grinding width: 400 mm Workpiece height: 450 mm Table clamping area: 600 x 400 mm Grinding wheel dimensions: 300x50 mm Grinding spindle motor: 3.5 kW Table speed: 0 - 30 m/min Grinding wheel speed: 0 - 35 m/s Magnetic plate size: 600 x 400 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t Room requirements approx.: 3.5 x 2.5 x 2.5 m 12 month warranty Paper filter machine Automatic table dressing with compensation 1 pc. flange Setting-up elements

Plate filters/layers filter on role Manufacturer: KTM Troxler Type: FP 430 30 filter plates made of plastic DN 25 outlet with valve bottom Filter plate size: 40 cm x 40 cm In very good condition!

Surface grinding machine

Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition Nagema wafer cutter 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked

Horizontal fraesing machine with swivel vertical frescent head (3510.3), table 315 x 1000 mm, x/y/z = 710/260/420 mm, Sk 40, speed range 45-2000 rpm, feed range 16-800 mm/min, eilgaenge 4 m/min, weight approx. 1.5 t

Horizontal grinding machine ELB, magnet 500/350 mm, table 840/350 mm, mesh. No. 140030676

Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked

Overhaul, retrofit, control conversion of all ELB-Schliff grinders with Granitan machine bed. Available with or without enclosure.

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

OKUMA MACHINING CENTER MODEL: MX-60HB TABLE: 630X630 mm X-AXIS STROKE: 1000 mm Y-AXIS STROKE: 810 mm Z-AXIS STROKE: 800 mm TOOL WAREHOUSE: 150 SEATS CONTROL: OSP-E100M

MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control type MORI SEIKI MSC-502. The milling machine has a table size of 500 x 500 mm and processes workpieces weighing up to 500 kg. The travel range of its X, Y, Z axes is 630 x 600 x 650 mm, respectively. The machine spindle rotates at 12,000 revolutions per minute. The milling machine is equipped with a magazine for forty tools with a maximum tool diameter of 150 mm, length 360 mm and a weight of 12 kg. The milling center is offered at a price with different types of holders. Technical parameters of the MORI SEIKI SH-500/40 CNC milling machine - CNC control: MORI SEIKI MSC-502 Travel range: - X axis (table travel length): 630 mm - Y axis (vertical movement of the spindle head): 600 mm - Z axis (cross table movement): 650 mm - distan ...

Ilapak stainless flow wrapper Carrera 2000 PC Stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel.

X-AXIS STROKE: 840 MM Y-AXIS STROKE: 860 MM Z-AXIS STROKE: 840 MM TABLE SIZE: 630 X 630 MM TABLE CAPACITY: 1,200 KG SPINDLE POWER: 30/25 KW ROTATION SPEED: 12,000 RPM ATTACHMENT: BT 50 NASOMANDRINO/PALLET DISTANCE: 50-810 MM SPINDLE-PLANK DISTANCE: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAX. WORKPIECE HEIGHT: 1000 MM CONTROL: MSG-502 YEAR OF BUILD: 2002

HORIZONTAL MACHINING CENTER NR. 2 KITAMURA HX500I WITH FATESYSTEM SHUTTLE Features: X-AXIS STROKE: 870 MM Y-AXIS STROKE: 710 MM Z-AXIS STROKE: 660 MM 4TH AXLE (ROTARY TABLE): 0.001-360 ° TABLE: 500 X 500 MM MAX PERMISSIBLE LOAD ON THE BOARD: 800 KG SPINDLE CONE: ISO50 ROTATION SPEED: 12,000 RPM GAMMA CHANGE: 2 GEAR RANGES FAST FEEDS: 50,000 MM/MIN TOOL CHANGE KITAMURA 1:100 SEATS TOOL CHANGE KITAMURA 2:50 SEATS CONTROL: FANUC 16 iM SHUTTLE FASTEM SYSTEM TO 16 STATIONS

OKUMA MACHINING CENTER MODEL: MA-400HA TABLE: 400X400 mm Nr. PALLET: 2 X-AXIS STROKE: 560 mm Y-AXIS STROKE: 610 mm Z-AXIS STROKE: 625 mm ATTACK: HSS63 TOOL WAREHOUSE: 60 SEATS CONTROL: OSP-E100M

COURSE AXIS X: 840 MM COURSE ASSE Y: 860 MM COURSE ASSE Z: 840 MM TAVOLA SIZE: 630 X 630 MM TABLE RANGE: 1,200 KG TABLE INDEX: 1ST MANDRINO POWER: 30/25 KW ROTATION SPEED: 12,000 GIRI/MIN ATTACK: BT 50 NASOMANDRINO/PALLET: 50-810 MM MANDRINO - TAVOLA: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAXIMUM HEIGHT OF THE PIECE: 1000 MM CONTROL: MSG-502 BUILT: 2002

COURSE AXIS X: 840 MM COURSE ASSE Y: 860 MM COURSE ASSE Z: 840 MM TAVOLA SIZE: 630 X 630 MM TABLE RANGE: 1,200 KG TABLE INDEX: 1ST MANDRINO POWER: 30/25 KW ROTATION SPEED: 12,000 GIRI/MIN ATTACK: BT 50 NASOMANDRINO/PALLET: 50-810 MM MANDRINO - TAVOLA: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAXIMUM HEIGHT OF THE PIECE: 1000 MM CONTROL: MSG-502 BUILT: 2002

horizontal conveyor belt with hydromotor

YEAR: 08/2004 LONGITUDINAL CORSA: X 800 MM TRANSVERSE COURSE: Y 700 MM VERTICAL COURSE: Z 700 MM ASSE B INDEXED 1st PALLET (2) 500X500 MM CNC MAPPS MSG-501 TOOL WAREHOUSES 60 LOCATIONS ATTACK MANDRINO BT40 MANDRINO MASSIMA VELOCITY 12000 RPM POWER OF MANDRINO'S POWER 26 KW

MANDRINO NASO: ASA A2-8 BAR PASS: 90 MM ROUND NUMBER: RPM 2500 COURSE AXIS X: 300 MM COURSE ASSE Z: 1250 MM TURNING DIAMETER: 500 MM TURNING LENGTH: 1200 MM IDRAULIC AUTOCENTRANTE TOOL COUNT: 12 CONTROL: FANUC Oi-TD YEAR: 2010

Capacity, ton 800 Movable die stroke, mm 180 Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strokes per minute 35 Die dimensions, mm 590 x 220 x 660 Electric motor power, kW 40 Dimensions: mm 6300 x 3900 x 2850 Weight: kg app. 80800

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

: 330 mm : 5000 mm : 450 mm : 330 mm : 450x330 mm dimensions of saw-band: 5000x34x1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- The largest diameter of the workpiece, mm 90 - The maximum diameter of the planted flange, mm 120 - Rated force of the landing slide, kN 6300 - The force perceived by the clamping slide with closed dies, kN 6300 - stroke of the landing slider, mm 350 - The stroke of the landing slide after closing the dies, mm 230 - The frequency of continuous idle slider per minute, not less than 42 - Power of the electric motor 45 - Dimensions, mm length 4835 width 3450 height 2880

CNC CONTROL: MSD 501 II, FANUC FEATURES: DIAMETER ADMITTED ON THE BED, MM 680 MAXIMUM TURNING DIAMETER 440 MM N1 MAXIMUM TREATMENT DIAMETER N2 322 MM MAXIMUM TURNING LENGTH, MM 471 THE STANDARD MACHINING DIAMETER MM170 MAIN SPINDLE: STEP PANEL 45 MM COUNTER SPINDLE: HOLE PITCH LINE 43 MM TURRET 1: POSITION N12 ALL MOTORIZED TOWER 2: POSITION N12 ALL MOTORIZED

with vertical matrix connector Max. work-piece diameter: 140 mm Max. diameter of upset flange: 180 mm Nominal force of upset slide: 12500 kN Force on clamping slide with dies closed: 12500 kN Stroke of: -Upset slide: 460 mm -Upset slide after closing of dies: 310 mm Number of continuous slide strokes per minute: at least 32 Electric motor power: 75 kW Machine dimensions: -Length: 8035 mm -Width: 4800 mm -Height: 3575 mm Machine weight: 140 tons

Technical data: - Cutting range at 90° around 260 mm - flat 450 x 240 mm - Cutting range at 45° around 230 mm - flat 240 x 200 mm - Machine is mounted on original turnstile - Saw band dimension 3660 x 25 x 0.9 mm - Cutting speeds 20 / 35 / 50 / 70 m/min - Hydr. lifting + lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 0.8 kW - Coolant device - Space requirement approx. W 2100 x H 1200 x D 1000 mm - Weight approx. 500 kg

CNC Control: FANUC 31i-B Axes X-axis travel mm: 1050 Y-axis travel mm: 850 Z-axis travel mm: 970 B-axis degrees: 0.001º Distance between spindle - table top mm: 100-950 Work table Number of pallets: 2 Table dimensions mm: 630x630 Maximum part size (D x H) mm: ø1.100x1.100 Maximum weight of the piece kg: 1200 APC Time: 15.5 Spindle Spindle speed rpm: 10000 Spindle power kW: 30 (25% ED) Spindle torque Nm: 420 (25% ED) Tooling System Tool Holder: HSK-A100 Tool Magazine Positions: 90 Max. tool diameter mm: ø250 Max. tool length mm: 550 Tool-to-tool time: 2.4 Chip to chip time: 4.5 Equipment Electronic steering wheel Chip extractor Washing Gun Signal light High Pressure Pump Mist collector 4th axis RS 232 Interface Internal cooling 3D Renishaw tool probe 4x pallets Toolholders are not included Machine Run Times Hea ...

CNC controller: MITSUBISHI MSX-853 IV Axes X-axis travel mm: 560 Y-axis travel mm: 560 Z-axis travel mm: 660 Distance spindle nose - table surface mm: 80-640 Feed rates m/min: 0-60 Worktable Number of pallets: 2 Table dimensions mm: 400 x 400 Maximum workpiece size (D x H) mm: 630x900 Max. workpiece weight kg: 400 APC time s: 9 División estandar Grados: 360 - 0.001º Spindle Spindle speed rpm: 12.000 Spindle drive power kW: 15/11 Spindle torque Nm: 110 Bearing Inner Diameter mm.: 80 Tipo: SJ-2B4351TK Tool system Tool magazine slots: 40 Max. Tool Diameter: 70 With free neighboring places mm: 170 Max. Tool Length mm: 450 Max tool weight kg: 8 Tool Shanks : MAS-BT40 Equipment Chip conveyor Workarea light 4th axis Cooling Tank capacity: 170L High-pressure bar: 15 Machine running times Under power: 64.734 Rated power kVA: ...

Automatic horizontal packaging machines Model:NT-250 Voltage:AC 220/50 Film width:Max.250mm Power:2.4KW Bag length:65~190mm or 120~280mm Bag width:30~110mm Product height:Max.40mm Film diameter:Max.320mm Pack speed:60~120bags/min Machine size:37706701450mm Weight:480kg

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

Packaging machine BVM Compacta Trend; good condition; is cleaned and checked before delivery; Welding0 width 500mm; Passage height 220mm; treadmill finger conveyor belt 1600mm; SC 4530 shrink tunnel with plastic link belt; Discharge belt 1000mm. Side sealing machine BVM Compacta Trend; good condition; will be cleaned and checked before shipping; sealing width 500mm; hight 220mm; infeed conveyor with fingers 160mm; shrink tunnel SC 4530 with plastic belt; outfeed conveyor 1000mm.

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

cutting diameter: 320 mm saw band length: 3660x27x0,9 mm cutting width: 400 mm cutting capacity - flat: 400 x 220 / 90° mm cutting capacity - round: 320 /90° mm speed: 20 - 100 m/min cutting capacity - flat: 280 x 200 / 45° mm cutting capacity - round: 280 / 45° mm sawing motor: 1,5 kW hydraulic motor: 0,37 kW coolant pump: 0,12 kW total power requirement: 2 kW weight of the machine ca.: 670 kg dimensions of the machine ca.: 1800 x 850 x 1200 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 200 kN stroke length max.: 200 mm working feed: 10 mm/sec return speed: 20 mm/sec : 480x1060 mm work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 2,2 kW : 200x12 mm bending capacity max. - round: 48x4,0 mm weight: 500 kg Overall size: 1010x480x1120 mm Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mm y-travel: 450 mm z-travel: 450 mm rotary table dia.: 270 mm rotary table tiltable: 0 - 24 ° spindle taper ISO: 30 spindle turning speed range: 31,5 - 7100 U/min feed speeds: 1 - 10.000 mm/min control: SINUMERIK System 8 no. of tools in magazin: 40 wotkpiece diameter with 2 vacant positions: 100 mm workpiece length: 255 mm weight of tools max.: 6 kg total power requirement: 32 kW weight of the machine ca.: 11,6 t dimensions of the machine ca.: m = 5 axis machining centre Accessories: various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 325 mm saw band length: 4380x34x1,1 mm cutting width: 450 mm cutting capacity - flat: 450 x 325 / 90° mm cutting capacity - round: 325 /90° mm speed: 20 - 100 m/min sawing motor: 2,2 kW total power requirement: 3 kW weight of the machine ca.: 1010 kg dimensions of the machine ca.: 2100 x 860 x 1500 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 360 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 700 mm cutting capacity - flat: 590 x 360 /30° mm cutting capacity - round: 360 / 30° mm cutting capacity - square: 360 x 360 / 30° mm cutting capacity - flat: 460 x 360 /45° mm cutting capacity - round: 360 /45° mm cutting capacity - square: 360 x 360 / 45° mm cutting capacity - flat: 305 x 360 /60° mm cutting capacity - round: 360 / 60° mm cutting capacity - square: 305 x 360 / 60° mm cutting capacity - flat: 700 x 360 / 90° mm cutting capacity - round: 360 / 90° mm cutting capacity - square: 360 x 360 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 0,55 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 3,7 kW weight of the machine ca.: 1460 kg dimensions of the machine ca.: 2850 x 1000 x 1850 mm Accessories: • Inverter • hydraulical vice • automatical ...

cutting diameter: 460 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 460 mm cutting capacity - flat: 470 x 460 / 90° mm cutting capacity - round: 460 / 90° mm speed: 20 - 100 m/min voltage: 400 V / 50 Hz sawing motor: 4 kW total power requirement: 4,7 kW weight of the machine ca.: 1,665 t dimensions of the machine ca.: 2100 x 1300 x 850 m full-automatical band saw, Accessories: • Inverter for controllable speed, • automatical stop function after sawing and on breakage of the saw blade, • automatical saw arm lifting, • hydro-mechanical clamping of the saw blade, • material clamping to be effected from above, hydraulical vice, • switch for cutting pressure control, • coolant pump, • roller conveyor, length: 1.2 m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mm y-travel: 700 mm z-travel: 630 mm Control: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mm Table load: 400 kg number of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 25 - 90 m/min total power requirement: 1,1/1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 18 - 100 m/min table height: 940 mm total power requirement: 1,5 kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mm saw band length: 2455 mm table height: 850 mm cutting width: 230 mm cutting speed: 25 - 80 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm : 90 mm : 90 mm : 90 x 100 mm : 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mm stroke back stop: 210 mm cross-slide: 230 x 185 total power requirement: 1,2 kW weight of the machine ca.: 0,24 t dimensions of the machine ca.: 1,2 x 0,6 x 1,7 m Miter cuts to 60 ° left - cutting speed 35/70 m / min. - Vice with rapid clamping device - Bandsaw blade guide made of hard metal - Band tension control - Electric cooling automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.