129,423 used machines on RESALE, but how to find them? Machine Search
spindle diameter: 150 mm x-travel: 4000 mm y-travel: 3000 mm z-travel: 1000 mm w-travel: 1500 mm Table area: 2000x2000 mm Table load: 30 t Feed: 3-3500 mm/min Rapid movement: 5000 mm/min transmission ratio: 2 spindle power: 37 kW total power requirement: Heidenhain kW voltage: 380 V frequency: 50 Hz Control: type: ITNC mm weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. ...
x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm Control: Heidenhain TNC 410M table surface area: 800 x 400 mm tool taper: ISO 40 spindle turning speed - stepless: 50 - 4000 U/min main drive motor: 5,5 kW total power requirement: kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: m CNC control HEIDENHAIN TNC 410M Coolant equipment Machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 400 mm y-travel: 390 mm z-travel: 350 mm Control: DIALOG4/CONTOUR 3 tool taper: SK 40 spindle turning speed range: 31 - 3150 U/min feed range: 10 - 2000 mm/min total power requirement: kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 1.600 x 2.500 x 2.000 mm CNC control DIALOG4/CONTOUR 3 Table: 700 x 480 mm rigid angle table Swivel-type vertical milling head Coolant tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC Table Type Horizontal Boring Mill Doosan DBC 130II. S/No. MB0003-000435 New in 2013 Control Fanuc 31i-MA Spindle Dia. : 130mm Travel : XYZ – 3000/2000/1600 mm W – 700 mm Rotary Table (1/1000 ͦ) Size : 1600 x 1600 mm 2 Pallets Spindle Speed : 2500 rpm Tool type : BT50 ATC : 80 tools
Universal tool milling machine TOS FNGJ 32 3 Axis Heidenhain Digital Display Year of Make: 1999 Travel: X 600 Y 400 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Rigid angle table 800 x 400 mm clamping surface Vertical milling head Extendable drill quill Various tool holders SK 40 Safeguard Chip tray Machine Light Automatic central lubrication pump for X,Y,Z axis Coolant Setup 4 pcs machine shoes
x-travel: 410 mm y-travel: 310 mm z-travel: 400 mm table-size: 700 x 280 mm control: Heidenhain TNC 145 tool adaptor: SK40 turning speed range: 40- 2.000 U/min rapid speed: 1,5 m/min feed speeds: 1500 mm/min power requirement: 2.2 kW quill stroke: 63 mm weight: 1,3 t total power requirement: 2,2 kW weight of the machine ca.: 1,5 t dimensions: 1,4 x 2,1 x 2,0 m Features: - New TFT screen - Coolant system - Hydraulic tool clamping - Milling head with spindle sleeve - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Universal tool milling machine DECKEL FP 3 With 3 axes active digital display Heidenhain TNC 11 Year of Make: 1984 Travel: X 500 Y 300 Z 400 Speed range: 25 – 2500 rpm With the following accessories: Rigid angle table 850 mm x 400 mm clamping surface Swivel rotary table 0 450 mm with dividing discs Bumper Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer Various milling mandrels SK 40 / S22 x 2 Chip tray Automatic lubrication pump for X,Y,Z axis Machine Light Coolant Setup 4 pcs machine shoes Operating instructions
spindle diameter: 120 mm x-travel: 1250 mm y-travel: 1250 mm z-travel: 800 mm spindle taper ISO: SK50 number of spindle speeds: Max. 2000 min-1 bore spindle stroke: . mm main drive motor: . kW turning speeds: . U/min Feed: . mm/min Control: Heidenhain type: iTNC 430 T-slot - width: . mm T-slot - distance: . mm table surface area: 1000x1000 mm Table load: 4000 kg total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Machine number: 62099 The machine table can be rotated continuously via fixed control. Tool magazine has 40 positions. Conversion from Bosch NC System 5 to Heidenhain iTNC 430 approx. 2000 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage ...
x-travel: 600 mm y-travel: 400 mm z-travel: 320 mm table-size: 900 x 420 mm control: konventionell tool adaptor: SK40 turning speed range: 35,5 - 1800 U/min quill stroke: ja mm total power requirement: 5,0 kW weight of the machine ca.: 1,45 t dimensions: 1,6 x 1,2 x 1,9 m Features: - Digital display - Coolant system - Milling head with quill The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 150 mm, 13500 mm, 3500 mm
Floor Type Horizontal Milling and Boring Machine Model : BF-150B with Fanuc series 311 — Model A CNC Controller in perfect working condition to be inspected in power YOM 2012 CNC Fanuc 31i Inspection Under power X - cross 13,500 mm Y - vertical . 3,500 mm W - boring ... 1,000 mm Z - quill ... 450 mm Spindle Taper ... No 50 Spindle Motor ... 26/ 22 kW 2 Angle Heads ATC 60 2 Rotary Tables 2m x 3m
Boring mill Manufacturer: TOS Type: WHQ 13.8 CNC Year of Make: 2000 CNC control: Heidenhain iTNC 530 Completely overhauled in 2022 Report available Travel: X/Y/Z: 3,500 x 2,500 x 1,250 mm Table length: 2,200 mm Table width: 1,800 mm Max. workpiece weight: 1,200 kg Spindle Ø: 130 mm Spindle speed max.: 3,000 rpm Spindle motor power: 37 kW Dimensions: LxWxH approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 tons.
2000 Toshiba BTD-200QF CNC Horizontal Boring Mill Spindle Diameter: 4.33" Extended Quill Diameter: 7.87" Taper In Spindle: #50 Vertical Head Travel, Y-Axis: 39.37" Table Cross Travel, X-Axis: 39.37" Spindle Travel, Z-Axis: 15.74" Saddle Travel, W-Axis: 27.55" Table Size, (2) Pallets: 39.37" x 39.37" Table Capacity: 6,000 lbs Table Indexing: 0.001 Degree Rapid Traverse (X,Y,Z Axes): 472.4 IPM Feed Rates: .04-236.2 IPM Table Load Capacity: 6,600 LBS Spindle Speeds (2 Ranges): 20-3000 RPM Floor Space, L x W x H: 173" x 174" X 126" Machine Weight: 39,600 lbs. -EQUIPPED WITH- Tosnuc 888 CNC Controls 40-Station Automatic Tool Changer (2) 39.37" x 39.37" Pallets with Pallet Shuttle System Thru Spindle Coolant Marposs Probing System Chip Conveyor 30 HP Spindle Motor
x-travel: 710 mm y-travel: 250 mm z-travel: 400 mm table-size: 1200 x 300 mm control: konventionell tool adaptor: SK40 turning speed range: 50 - 2500 U/min quill stroke: mm total power requirement: 2,2 kW weight of the machine ca.: 1,7 t dimensions: 2,1 x 2,0 x 1,6 m Features: - Digital display - Coolant system - Huron milling head - Emergency stop device - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 110 mm
HBM HWCa-110, new in 1965
HBM type Knuth BO110,Table size: 1100 mm x 960 mm with tail stock and face chuck
x-travel: . mm y-travel: . mm z-travel: . mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 350 mm y-travel: 210 mm z-travel: . mm digital readout: ja table surface area: 800x 240 mm turning speeds: 115-1750 U/min feed: . m/min throat: . mm spindle stroke: . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 850 mm y-travel: 300 mm z-travel: 450 mm table-size: 1100 x 250 mm control: konventionell tool adaptor: SK40 turning speed range: 35,5 - 1800 U/min quill stroke: mm total power requirement: 5,0 kW weight of the machine ca.: 1,25 t dimensions: 1,8 x 1,7 x 1,8 m Features: - Heidenhain digital readout - Infinitely variable feed and spindle speed - Coolant system - Chip guard - Hydraulic vise - Good condition - SK40 tool holders and accessories (see pictures) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fabricante JUARISTI Modelo TS-5 MG 20 5 EJES Año 1996 CNC HEIDENHAIN TNC-430 CA Mesa Superficie de la mesa 2.000 x 2.500 mm. Tipo mesa Juaristi MG-20 Peso admisible sobre mesa 20.000 kg. Giro mesa (Eje B) Continuo (0.001º) Ejes Curso trasversal (Eje X) 5.000 mm. Curso longitudinal (Eje W) 2.000 mm. Curso vertical (Eje Y) 2.500 mm. Curso axial (Eje Z) 800 mm. Ejes controlados X, Y, Z, W, B Avance rápido ejes 10.000 mm/min Cabezales Diámetro de la caña 150 mm. Cabezal universal 45º manual INCLUIDO Cabezal salida directa INCLUIDO Cono ISO 50 Número de gamas 2 Velocidad cabezal 0-2.000 rpm Gama baja 12 – 732 r.p.m. Gama alta 733 – 2.000 r.p.m. Giro a par constante 12 – 183 r.p.m Giro a potencia constante 183 – 2000 r.p.m. Potencia de cabezal 37 kW Equipamiento Refrigeración externa INCLUIDO Volante portátil HEIDENHAIN HR-410 Herramientas y ...
Manufacturer ZAYER Model 30 KMU-5000 Year 1999 CNC HEIDENHAIN TNC-430PA Table surface 4,700 x 1,200 mm. Strokes (X/Y/Z) 3,400/1,250/2,000 mm. Shaft Outlet (W Axis) 500 mm. ISO-50 Head Cone Main Motor Power 37 kW 45º Automatic Head INCLUDED Head Rotation 45º Automatic Rotation 0.001º/0.001º Head revolutions 45º 3,000 rpm 45º ISO-50 Head Cone Continuous Twist Head INCLUDED Twist head revolutions 3,000 rpm Twist Head Cone ISO-50 Ram with cane INCLUDED Shank diameter 150 mm. ISO-50 Rod Cone Internal and external cooling head 45º and rod INCLUDED External cooling twist head INCLUDED Semi-automatic head pickup INCLUDED Automatic Loading Tools INCLUDED Loader Positions Htas 60 AITEK Pickup Station for 45º head storage and Twist Head INCLUDED Chip Evacuator INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel RENISHAW MP 16+SP2/1 Piece Measurement Probe Motors + ...
spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1500 mm z-travel: 1450 mm table surface area: 1400 x 1600 mm taper ISO: 50 spindle speed:: 2 - 2500 Control: TOSNUC 7-3 total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 2000 mm w-axis: 700 mm table load: 10.000 kg Table dimensions: 1600x1800 mm Control: Fanuc 31iMB voltage: 400 V number of spindle speeds: 35-3000 U/min taper ISO: 50 Tool changer: 60 total power requirement: 20/30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mm table width: 1500 mm table load: 10 t voltage: 380 V Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Heidenhain D.R.O. Additional plate on rotary table: 2.000 x 3.000 x 3.000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 125 mm spindle travel: 1000 mm column movement horizontal: 7000 mm headstock - vertical: 2500 mm/min cross travel column: 450 mm taper ISO: ISO 50 P.D.B. total power requirement: 25 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Boring spindle diameter: 130mm, tool holder: SK50, centering: 500mm, travel X/Y/Z: 250mm/160mm/380mm, travel W/U: 1000mm/320mm, feed rate: 2m/min, rapid traverse: 5m/min, max. diameter drilling/facing: 800mm/1400mm, torque boring spindle/facing support: 3100Nm/6150Nm, clamping plate dimensions X/Y/Z: 3500mm/1750mm/350mm, weight: approx. 30000kg, controls: Bosch. Including angle head, extension piece, steep taper tool holder for SK50 (without tools), 4x plate fields with the dimensions 1080mm/2000mm and boring apparatus. Documentation available. An inspection on site is possible.
x-travel: 300 mm y-travel: 160 mm z-travel: 290 mm table surface area: 600 x 210 mm tool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1,2 m/min spindle motor: 1,5 / 1,9 kW total power requirement: 9,5 kVA weight of the machine ca.: 830 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine is in very good condition and comes from a training workshop. Equipment: 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage Fixed angle table Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm Coolant equipment Central lubrication Tailstock with counter bearing Manual The data for this ad was created with ModulMWS - the software solution o ...
3 Axis Digital Display FAGOR Year of Make: 1975 Travel: X 500 Y 200 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Universal table 660 x 380 mm clamping surface Vertical milling head Extendable drill quill Milling cutter protective housing Machine Light Various tool holders SK 40 Chip tray Coolant Setup 4 pcs machine shoes Operating instructions THE MACHINE IS IN VERY GOOD CONDITION
Universal tool milling machine DECKEL FP 4 MK with 3 axes active digital display Heidenhain TNC 113 Year of Make: 1990 Travel: X 500 Y 400 Z 400 Speed range: 50 – 2500 rpm With the following accessories: Rigid angle table 800 mm x 460 mm clamping surface Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer Hydraulic tool clamping Hydraulic vise GRESSEL 125 mm Various SK 40 milling mandrels Splash guard cabin Automatic lubrication pump for X,Y,Z axis Machine Light Coolant Setup 4 pcs machine shoes Operating instructions
Milling chuck, boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, universal drill head, boring tool, face head, facing and boring heads -Manufacturer: Komet microbore twinbore, milling heads, facing and boring heads with countersinking tool -Type: various designs, see photos -Comet: Type AB/VD 80 / AB/V 63x85 / AB/FZ 63 / AB/FZ 40 / AB/FZ 25 / FZ 32-100-3 / 2x AB/ISO 40x63x50 -Comet: Type AB/VD 63 / AB/VD 40 / AB/FZ 80 / AB/V 40x60 / AB/VD 50 / AB/V 25x60 / AB/VD 25 ... -twinbore: microbore MTP-75-1 / MTP-75-80 ... -Price/Fee: complete -Dimensions of transport case: 715/365/H210 mm -Total weight: 72 kg
Milling holder, boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, universal drilling head, boring tool, facing head, facing and boring heads -Manufacturer: ER MEX CH, milling holders face and boring head MK4 -Type: D-210 -Dimensions: Ø 96 x 385 mm -Weight: 8.3 kg
x-travel: 7000 mm y-travel: 3000 mm z-travel: 1200 mm W-axis (spindle longitudinal): 500 mm spindle diameter: 150 mm quill:: 380 x 380 mm Plate dimensions: 4x 5000 x 2000 mm powered rotary table: 1600 x 1600 table load of rotary table max.: 10 t travel on the bed: 1500 mm tool taper: SK 50 turning speeds: 2,5 - 1000 U/min power capacity - milling spindle: 30 kW dimensions: m weight of the machine ca.: 62 t used manual horizontal borer with plate field - digital scale - tailstock - moveable vertical milling head - movable turn table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control Fanuc Spindle diameter ... 100mm Axis X ... 1270mm Axis Y ... 910mm Spindle speed ... 0-2000 rpm. Axis W ... 730mm Axis Z ... 900mm ISO 50 Max. table load ... 3000kg Clamping table surface ... 1000x1120mm Machine weight ... 11500kg L x W x H ... 5000 x 3000 x 2800mm Main engine power... 18.5kW Total power requirement ... 31kVA More info on request. The machine is ready for the viewings.
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 monoBlock With track control Heidenhain iTNC 530 Year of Make: 2005 Travels: X 980 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1250 mm x 700 mm clamping surface 3 D Probe Heidenhain Tool measurement in the BLUM Laser workspace Vertical tool changer with 32 magazine positions (HSK 63) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Chip conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions
x-travel: 1000 mm y-travel: 450 mm z-travel: 450 mm table surface area: 1370 x 400 mm number of T-slots: 5 Stck. spindle turning speed range: 32 - 1500 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 50 total power requirement: 7,0 kW weight of the machine ca.: 3,1 t dimensions: 2,1 x 1,7 x 1,9 m Milling machine with - Heidenhain TNC 135 - Rapid traverse - Milling head with hydraulic tool cutting - Coolant system - Central lubrication The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 125 mm x-travel: 2000 mm y-travel: 1600 mm Control: Siemens 840 C z-travel: 1400 mm : 600 mm : ja total power requirement: 40 kW weight of the machine ca.: 27 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 720 x 410 mm spindle turning speed range: 40 - 2000 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 40 total power requirement: 3,0 kW weight of the machine ca.: 1,4 t dimensions: 1,8 x 1,6 x 1,9 m Milling machine with - Toolmakers table - Heidenhain digital readout - Rapid traverse - Coolant system - Central lubrication - Machine feet - incl. drawer unit with contents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 180 mm x-travel: 1000 mm y-travel: 1000 mm Control: DIXI CNC 4400 total power requirement: 47 kW weight of the machine ca.: 17 t dimensions of the machine ca.: 4835 x 2700 x 3190 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 500 mm, 400 mm, 400 mm
Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 310 Year of Make: 2001 Travel: X 500 Y 400 Z 400 Speed range: 20 – 4,500 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic handwheel for X, Y, Z axis Splash guard cabin Machine Light 4 Height Adjustable Machine Shoes Coolant Setup Operating instructions
x-travel: 4000 mm y-travel: 2500 mm z-travel: 1500 mm bore diameter: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The UNION KC 110 CNC boring mill in rigid T-type cross-bed design offers outstanding precision, power and reliability for efficient complete machining of prismatic workpieces. Equipped with a HEIDENHAIN iTNC 530 control, a 110 mm spindle and continuously variable spindle speeds up to 3,000 rpm, the machine is designed for demanding heavy-duty machining applications. With travels of X 2,500 mm, Y 2,000 mm and Z 1,500 mm, the UNION KC 110 is perfectly suited for large-scale machining tasks in modern production environments. Additional highlights include a 60-position automatic tool changer, high-pressure coolant system and an extensive refurbishment package ensuring long-term performance and accuracy. The data for this ad was cr ...
x-travel: 1000 mm y-travel: 330 mm z-travel: 500 mm table-size: 1300 x 280 mm turning speed range: 30- 1500 U/min power requirement: 2,5 kW tool adaptor: ISO 40 | feed speeds: 13- 620 mm/min | weight: 2,1 t range L-W-H: 2,0 x 1,5 x 1,9 m Universal tool room machine with digital scale - turn- and swiveling v- head . h- spindle - automatic feed - hand wheels - coolant system - machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300 mm y-travel: 160 mm z-travel: 290 mm table surface area: 210 x 600 mm tool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1,2 m/min spindle motor: 1,5 / 1,9 kW total power requirement: 9,5 kVA weight of the machine ca.: 730 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine comes from a vocational training center. Equipment: 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control Heidenhain ... TNC 640 Spindle diameter ... 110mm Axis X ... 3000mm Axis Y ... 2000mm Spindle speed ... 10-4000 rpm IKZ ... 70bar Axis W... 730mm Axis Z ... 1250mm Number of positions in the tool changer ... 40 Spindle holder ... ISO 50. Table size... 1400x1800mm Max. table load ... 8000kg Main engine power ... 31kW Machine weight ... 20800kg L x W x H ... 6250 x 5600 x 4450mm The machine is in very good condition, like new. Machine hours: 3,158 Spindle hours: 1,095 Hexagon workpiece probe
boring mill, year 2016, CNC Sinumerik 840D. Used machine in good condition. More info & price on IndustrialBuyer.
spindle taper ISO: . x-travel: . mm y-travel: . mm z-travel: . mm Control: Dialog type: System 2 mm table surface area: mm turning speeds: U/min quill stroke: mm Feed: mm/min rapid traverse: m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with Modu ...
x-travel: 500 mm y-travel: 300 mm z-travel: 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Machine number: 2120 Technical data: Longitudinal travel: 500 mm Cross travel: 300 mm Vertical travel: 380 mm Angle table with a clamping surface of 800 x 420 mm Spindle speed range: 40 – 2000 rpm Equipment: 3-axis digital readout (Heidenhain) Vertical milling spindle with quill adjustment Additional horizontal spindle REPAR 2 safety device (www.repar2.com) Machine light Anti-vibration mounts No operating manual included The machine is sold without a vise or tooling. Transport dimensions: The machine is loaded onto a heavy-duty pallet, Dimensions: 1800 x 1100 x 2100 mm (length x width x height) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Boring mill table used. Table load: 40 tons. Table dimensions: 2500 x 3500 mm Table displacement: 1600 mm Condition: Good. Can be demonstrated
x-travel: 1200 mm y-travel: 400 mm z-travel: 460 mm table-size: 1500 x 400 mm control: konventionell tool adaptor: SK40 turning speed range: 45 - 2000 U/min quill stroke: ja mm total power requirement: kW weight of the machine ca.: 3,2 t dimensions: 2,8 x 2,5 x 2,1 m Equipment: - ELESTA digital display - Infinitely variable feed - Coolant system - Horizontal milling attachment - Chip guard - Chip trays - Hydraulic machine vice - Machine light - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used Drilling and Milling Machine Manufacturer: PAMA FT 180 A YOC 1982 Travel distances: X = 12000 mm Y = 4500 mm Z = 1700mm approx. Control: Siemens Sinumeric840 Tool changer: 60 times 3 pcs PAMA heads. Drills, milling machines, etc. Without table Plates are included. From the foundation.
maximum number of results exceeded
please refine your search
