horizontal boring machine used for sale

Paper boring machine Dürselen Corta PB 04; Cleaned and tested; 4 drill heads (up to 6 stick.usable); Drill cooling and lubrication; Sliding table; Endless drilling tape; Inlay depth behind the holes 65mm; Max. Stack height 50mm; Sliding table size before the drills 300mm; Max. Drilling distance over sliding table 420mm. Paper drilling machine Dürselen Corta PB 04; The cleaned and checked; Four heads (up to 6 heads); Driller cooling and lubrication; Sliding table; endless drilling band; size behind drillers 65mm; Max.pile hight 50mm; Seft of table in front of the drillers 300mm; max.drilling distance over the table 420mm.

Universal milling machine vertically / horizontally from a training workshop Manufacturer Hermle Type FW801 Tool holder SK40 automatic feed in three axes Digital display in three axes Machine technically in very good condition under electricity ready for demonstration Technical data: Travel: x=350mm y=150mm z=220mm Spindle speeds from 50 to 3,150 rpm can be infinitely variable Feed speed infinitely adjustable via rotary pot from 10 to 5,000 mm/min, aisle Special price Used milling machine Hermle FW 801

Dowel drilling and drive-in machine Biesse type F/S Technical data: • Drill head: 21 spindles • Glue guns: 6

X axis travel 1000 mm Y axis travel 700 mm Spindle travel 300 mm Table dimension 1.100x842 mm Spindle speed 40-2000 rpm Max power input 10 kW Spindle motor 8 HP Total permissible load on worktable 1 ton Machine approximate weight 15 ton

In-line hole drilling machine Scheer DB 4 L x W x H: 1500 x 1500 x 1900 mm Weight approx. 1000 kg Built in 1980 1 aggregate vertically up 1 aggregate horizontal - vertically pivotable The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

SN.: 16210512 Equipment / other information: Tool

Quill for jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Stroke: 60 mm -in: a wooden box -Dimensions: 390/340/H170 mm -Weight: 15.8 kg

Spindle for plate boring mill, table boring mill, boring mill, milling machine, quill, boring head, Replacement spindle -SK50 holder for: screwing onto the faceplate -Adjustment: SK50 -Dimensions: 220/220/H160 mm -Weight: 20 kg

bore diameter: 550 mm Spindle diameter: 100 mm bore depth: 320 mm turning speeds: 10 70 U/min feed stepless: 0 - 12 mm/min voltage: 380 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 1.35 t dimensions of the machine ca.: 1,0 x 2,5 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

High precision drilling and milling machine Aciera 22 VA Good condition from school operations Year of construction approx. 1990 Table 600 x 320 mm Speed 40 - 3600 rpm Speed setting rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter 65 mm Drilling spindle stroke 120 mm Spindle holder: Aciera quick-change system Automatic thread cutting Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1.1 KW Lamp Some quick-change shots Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical information subject to reservation

I sell a Top Dubel drill multi-spindle drill Detel M-13, built in 2007. 3-spindle See good condition. Available the same.

Multi-stand drill Prior sale reserved - errors possible Internal Reference Number: D-1143-1

I sell a drill with cutting units COMEC FM0V8 2000, built in 1997. Working width max. 2000mm Configuration: 0 motors from below 1+1 motors from sides / angular adjustable 2 motors from behind / head angular adjustable 3 motors from above / head angular adjustable 4 pieces of material prints from above 2 cut saws from above / head angular adjustable Atypical 5-spindle drill heads Including 3 x 15mm / 2 x 25mm. Dubel heads in the price. Very good addition. Available the same.

Ayen Knothole Drilling Machine ED 08-4, Machine No.:270 316, 0,6kW, 380volt, 1420 rpm,

Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel paths: Z 330 mm/Y 410 mm/X 630 mm -Quick stroke: 155 mm -Recording: MK4 -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg

M. No.: 85039 // Model: 371 Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm

Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth:2500 mm Total height: 2600 mm Weight: 4,5 T

Sr. No.: 70218 Equipment / Additional information: Various tools

Longitudinal direction ''X''. 4500 mm Transverse direction ''Y''. 3000 mm Spindle stroke ''Z'' 500 mm Astand Spindle Table 160 – 660 mm Table load 2000 kg/m²

Condition: Very good condition

Key data: 8 mm, 1

Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...

Heidenhain TNC 124 Year of construction 1996 Spindle holder ISO 40 Travel 310 x 170 x 340 mm 16 spindle speeds from 40 - 2500 rpm Infinitely variable feeds Weight approx. 700 kg

Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 124 Year of construction: 2001 Travels: X 500 Y 400 Z 400 Speed range: 20 – 4,500 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic Handwheel for X, Y, Z Axis Splash protection booth Machine light 4 pcs. Height-adjustable machine shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital display Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 – 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axle Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Machine light 4-Piece Machine Shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

Saw-Drill Manufacturer: Pade Model: EV 25 Built in 1995 Sawing unit Drill gear with 5 spindles

SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES - volt. 380/50 - S/N 333 - year 1995

In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units  ...

In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units  ...

In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units  ...

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA machine for joining parts of chairs, living rooms, furniture, etc. the FTA machine is made up of 3 automatic operating units : 1st unit : circular saw for cutting workpieces to length 2nd unit : spindle moulder for milling with hydraulic sliding carriage 3rd unit : drilling unit with multiple center distance head . there are 9 work programs that can be selected and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 . hydraulic sliding carriage - Boring unit . engine power Hp 3 . max. depth drilling mm. ...

Sr. No.: 111000253 // p/n: 1364000

Offer 24435 Specifications: - Table surface 1700 x 550 mm - Manual travels X / Y 1300 x 500 mm - Drill Fabr. MAXION , Type: BT 15 GL - Drilling capacity up to 18 mm - Tapping device up to M 10 - Drilling spindle holder MK 2 - Drilling spindle stroke with drilling depth fine adjustment 90 mm - PV 12 pneumatic feed unit - Projection 670 mm - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm -Mot. Drilling unit stroke - Table clamping x + y - Minimum amounts of lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg - various guide cartridges

Key data: 500 mm, 400 mm, 400 mm

Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 320 Year of Make: 2001 Travel: X 500 Y 400 Z 400 Speed range: 20 – 4,500 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic handwheel for X, Y, Z axis Splash guard cabin Machine Light 4 Height Adjustable Machine Shoes Coolant Setup Operating instructions

Offer 24331 Specifications: - Table surface 1700 x 550 mm - Manual travels X / Y 1300 x 500 mm - Drill Fabr. MAXION , Type: BT 18 STP - Drilling capacity up to 18 mm - Tapping device up to M 16 - Drilling spindle holder MK 2 - Drilling spindle stroke with drilling depth fine adjustment 76 mm - PV 12 pneumatic feed unit - Projection 670 mm - Spindle speeds 100 - 1800 rpm - 200 - 3600 rpm -Mot. Drilling unit stroke -Mot. Table clamping x + y - Minimum amounts of lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg

Condition: Very good condition

Inv. Num. : 8054 Type: HYDROPTIC 6 Producer: SIP Generated: Parameters: Work table length: 1100 mm Work table width: 842 mm Maximum spindle speed: 2000 1/min Maximum table load (even): 1000 kg X-axis travel: 1000 mm Y-axis travel: 700 mm Z-axis travel: 800 mm Spindle power: 6 kW Machine height: 3205 mm Machine length: 3280 mm Machine width: 2335 mm Machine weight: 10000 kg

Manufacturer: Scharmann Model: FB 140 Condition: Used Type of Machine: Horizontal Table Boring Machine Plate Size: 1630 × 1300 Table Size: - Control System: Digital Display Spindle Hub: 140 Tool Holder Spaces: - Travel (X, Y, Z): 2000 × 1400 × 1400 Max Weight: 10000 kg Additional Notes: Equipped with Plan Disc Ø700. Find more here - / Contact us at -

Inv. Num. : 8153 Type: OP3 Producer: Hauser Generated: Parameters: Work table length: 595 mm Work table width: 320 mm Maximum spindle speed: 3000 1/min X-axis travel: 400 mm Y-axis travel: 250 mm Travel Z axis: 400 mm Spindle diameter: 130 mm Machine height: 1800 mm Machine length: 1350 mm Machine width: 1300 mm Machine weight: 1500 kg Equipment: DRO

Magnetic swivel table as shown in the pictures. Further information on request

Inv. Num. : 8262 Type: PR 99-20 Producer: Cobalm Created: 2011 Parameters: Axis X: 3400 mm Axis Y: 1900 mm Axis Z: 280 mm Cutting thickness: 200 mm

Manufacturer: Pankoke und Kochsiek, Type: BFA 03, Year: 1988, Drilling supprt from bottom: 3, Groove saw: 1x Horizontal<CRLF>1x Vertikal, Year :1988

Manufacturer: Protool, Type: Bohrm. DRP 8 E, Drilling engine kW: 0,460, FREE TEXT: mit Ständer,

Manufacturer: Pankoke und Kochsiek, Type: BFA-03, Control: hand, Program-controlled: no, Min.-max. workpiece length in mm: 22,5, Min.-max. workpiece height in mm: 0,75, Program: 40, Drilling beam swivel-mounted: no, Lochraster: yes, Drilling engine kW: yes, Working range max mm: yes, Drilling support horizontal: 2, Dovel insertion: inkl. Magazinaufstapel Magazin und Hauptsäge und Nutsäge,

Manufacturer: Weeke, Type: BST 50, Year: 1992, Program-controlled: yes, Work piece width min-max mm: 100-1050, Min.-max. workpiece length in mm: 350-2600, Min.-max. workpiece height in mm: 10-60, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 60, Drilling support horizontal: 2, Drilling supprt from bottom: 6, Drill support from top: keine, FREE TEXT: inkl Bohrhetriebe, Year :1992

Manufacturer: Rapid, Type: Astglochbohrmaschine, Number of drilling spindles: 3 Spindeln Schnellkwechsel, Aperture/throat mm: 600, Units - total: 1, Main engine kW: 0,75, Drill feed - pneumatically: hand, Milling spindles vertical: 80 mm,

Manufacturer: Koch , Type: BLG, Year: 1992, Control: hand, Program-controlled: yes, Software: 300, Work piece width min-max mm: 200-2500, Min.-max. workpiece length in mm: 10-60, Program: yes, Lochraster: alle 2, Drilling engine kW: 60/80, Working range max mm: 2 von hinten, Drilling supprt from bottom: 2, Drill supports from behind: 7, Work piece refeeding: yes, Taktleitung min: 1, Dovel insertion: yes, Overhauled on: alle Bohrgetriebe drehbar 360 Grad, Year :1992

Manufacturer: Scheer , Type: DB 3000, Control: Fusspedal, Drilling beam swivel-mounted: yes, Number of drill spindles: 4, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 80, Beleimwerkzeuge: no, Dovel insertion: no, Work piece clamping: Pneumatisch, Pneumatic clamping: yes, Work piece support: yes, Work stations: 2, Foot switch: yes, Axis control for: no, Drilling hight: 60, Wight approx. kg: 1000, Abeitsbreite 3000 mm,

Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Travel X: 500 mm Travel Y: 300 mm Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Throat depth: 300 mm Variable speed drive for X - Y Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Total width with control panel: 2700 mm Weight: 3 T

cycle time: 0 sec total power requirement: 2,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m P O S A L U X (Switzerland) Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3 Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With s ...