We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,611 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
MEP Multimatic SA8, year of construction 1995 Straightening and cutting system for reinforcing steel, fully automatic, complete functional system, immediately available Plant still in operation and can be demonstrated.
used
Machine number: 02106
used
Specifications: - 2 mot. driven rollers - manual. Delivery of the top roller - Shaft diameter 30 mm - Shaft rotation 6 rpm - Roller diameter 132 mm - Bending performance - Flat steel upright 50 x 10 mm - flat 80 x 15 mm - Square 30 mm - Square tube 50 x 50 mm - Round tube 60 x 1.5 mm - Drive 400 V / 0.6 / 0.8 kW - with: - right / left - run - Standard bending set for flat and angle material - separate control panel - Weight approx. 200 kg - Space requirement approx. W 650 x H 1300 x D 950 mm
used
including basic tooling set - Pressure force: 150 t - Bending length: 3.100 mm - Axes: Y1, Y2, X, R, Z1 & Z2 - Distance between uprights: 2.750 mm - Working speed: 10 mm/seg - Returning speed: 150 mm/seg - Locking speed: 150 mm/seg - Throat: 315 mm - Stroke max: 215 mm - Power: installed max: 11 + 15 kW - Weight: 9.800 kg - Dimensions (long x wide x high): 3.910 x 1.900 x 2.660 mm
used
Tauring DS80HP bending machine Pyramid 3 rollers SAF DS80 CNC-C complete with use and maintenance manual, programming manual, safety manual, quick reference manual
used
The machine is equipped with pipe bending tool D33,70, without guide mandrel. The previous owner damaged it. Machine after installation, serviced 05/2023.
used
used
used
used
including bending jigs
used
Brewing angle: 0 - 90 degrees
used
Working width: 95mm
used
Hydraulic tube bending machine. -4 bending jigs, incl 4 pressure pieces. -Sizes of bending jigs: -Round 20-R67. -Round 22-R67. -Round 25.4-R82. -Round 30-R112. -Mobile.
used
Manually operated Jorg bending machine; dimensions total 2800x1500x1600mm; Height adjustment partially disassembled.
used
used
used
equipped with control console; including plastic rolls
used
Portal straightening press with 400 T capacity Oil-hydraulic double column press a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000x3000mm d) Open height 1500 mm e) Total size approx. LBH 6000 x 5000 x 4500 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) table in grid construction, i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 60 T to 400 T via MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body powder-coated, or double-painted n) T-grooves according to customer requirements o) Cylinder induction hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 4000 kN Free tearing force ...
new
Standing seam metal roof machine F3 Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing s ...
used
used
Manual
used
used
used
Rotation speed 20 rpm; foot control; incl. 3 extra rolls
new
Electric elbow making machine EEM-200 plus Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipe from all four sides while bending and provides better quality of elbow. Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. You can use our machine for working with round pipes as with rectangular pipes. There are four types of Elbow making machines we produce: 1. Elbow making machine EEM-150 for the pipes from 80mm to 150mm diameter. 2. Elbow making machine EEM-200 for the pipes from 80mm to 200mm diameter. 3. Elbow making machine EEM-250 for the pipes from 80mm to 250mm diameter. 4. Elbow making machine EEM-200plus for pipes 80-200mm. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. ...
used
new
sheet width: 1070 mm plate thickness: 3,0 mm distance between columns: 1100 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 420 Kg dimensions of the machine ca.: 1600 x 800 x 1200 mm Motorized sheet metal bending machine with: - Foot switch for left / right - manually adjustable rear roller - Hardened rollers - Conical bending - Swiveling top roller - Safety device emergency leash - Documentation currently only in English - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
used
Manual mandrel bending machine, incl bending jigs for tube 16mm R40, 19mm R50, 22mm R75, and some special rollers, auxiliary rods for mandrel.
used
used
Including control console and bending rollers
used
Bending device. -Max capacity: 100 x 5 mm, WGW strip. -Detachable pull bar. -Stop pin for making series. -Length with pull bar: approx. 64.5 cm.
new
sheet width: 1000 mm plate thickness: 8,0 mm distance between columns: 1070 mm diameter of upper rolls: 150 mm pre-bending capacity: 6,o mm connected load: 4,0 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2,6 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
sheet width: 1070 mm plate thickness: 2,0 mm distance between columns: 1100 mm diameter of upper rolls: 76 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
NANTONG SHENGLI HEAVY MACHINE MANUFACTURING W12-25X3000 plate rolling machine was manufactured in 2015 by Chinese manufacturer Nantong Shengli Heavy Machine Manufacturing Co., Ltd. The plate rolling machine has 4 rolls driven by a hydraulic motor with a diameter of 430 mm (upper roll), 390 mm (lower roll) and 330 mm (side rolls). The 4-roll NANTONG SHENGLI HEAVY MACHINE MANUFACTURING W12-25X3000 rolling machine allows rolling sheet metal with a maximum length of 3000 mm and a thickness of 25 mm at a working speed of 8 m/min. The axes of the large plate rolling machine are controlled by an NC controller with a touch screen. The plate rolling machine have worked a small amount of time. The total weight of the machine is approx. 23 tonnes. Technical parameters of the Nantong Shengli Heavy Industry W12-25×3000 plate rolling machine - NC control - maximum length of the rolled metal s ...
new
sheet width: 300 mm plate thickness: 2,5 mm distance between columns: 300 mm diameter of upper rolls: 32 mm total power requirement: Handbetrieben weight of the machine ca.: 15 Kg dimensions of the machine ca.: 500 x 300 x 150 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
This CIDAN FORMA Z was manufactured in 2020. A bending machine with a work area of 4100mm, it offers bending capacities for black steel up to 3mm, stainless steel up to 1.9mm, and aluminum up to 4.5mm. Features include CNC crowning and a bending depth of 254mm. Located in Croatia and available immediately. Contact us for further details regarding this bending machine.
used
Manufacturer: CAMU Machine type: RM800/II 4429 Year of construction: 1999 Overall size: 1200 x 1600 x 1400 mm Max disk width: 700 mm Max plate thickness: 4,0 mm Electronic data: 380 V; 50 Hz
used
Sahinler HPK 60 Pipe and Profile Bending Machine Machine never used, new condition Hydraulic and digital control unit Shaft diameter : 60 mm Roll diameters : 215 mm Top
used
Capacity: 10 tons Includes: bend adapters Foot pedal operation
used
Portal straightening press with 300 T capacity a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500x1600mm d) Open height 700 mm e) Total size approx. LBH 4500 x 2300 x 3700 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) Table in grid construction, with T grooves according to customer requirements, otherwise 22mm i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 50 T to 300 Tvia MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body double painted n) Cylinder induction hardened Design Press type PORTALPRESSE Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 3,000 kN Free tearing force max. 500 kN Pressure build-up time Closed tool St ...
used
This 4-axis Durma E 1240 bending machine was manufactured in 2008. It features a CYBELEC DNC 880S control, a maximum bending length of 1200 mm, and a force capacity of 40 tons. The machine dimensions are 1500 x 2100 x 2400 mm, and it weighs 2900 kg. A great opportunity to buy this Durma E 1240 bending machine. Contact us for further details regarding this bending machine.
used
M. No.: 6513/19
used
The machine is in working order and has many accessories Programmable up to 10 folds. dies up to 50 mm Matrices of: 20, 25, 30 and 50
used
used
Working width: 2000mm, max. sheet thickness: 13mm, can be used horizontally and vertically, with decoiler, decoiler driven and hydraulically adjustable to coil diameter.
used
Working width: 3000mm, max. sheet thickness: 120mm, with optical display of roller adjustment, central lubrication, cone bending device, overrun brake and exchange top roller Ø820mm and Ø740mm.
used
Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012.
used
Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices.
used
Working width: 3000mm, max. sheet thickness: 15mm, with digital display of roller adjustment, driven rollers, mobile control panel, cone bending device, upper and lateral cylinder support device.