horizontal bending machine used for sale

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14700 € : 282.24 € : 1550 mm : 4 mm : 140 mm : 3,5 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1420 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 25200 € : 481.32 € : 1050 mm : 2.5 mm : 2.5 mm : 2 mm : 90 mm : 4,5 m/min : 2.2 kW : 2250 mm : 1000 mm : 1500 mm : 900 kg FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE) 4 rolls NC control with touchscreen Top roll driven by hydromotor and plantary gearbox Hydraulic drop end Mobile control panel Hardened rolls Operating manual in English or German OPTION: Feeding table price on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9740 : prompt, Zwischenverkauf v : Türkei : 6500 € : 125.45 € : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 6 mm : 6 mm : 4 mm : 5 mm : 4.5 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear gu ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 22 mm : 22 mm : 16 mm : 19 mm : 17 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 14 mm : 14 mm : 8.4 mm : 10 mm : 9 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 20 mm : 20 mm : 12 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 12 mm : 12 mm : 6.5 mm : 8 mm : 8 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 32480 € : 620.37 € : 1550 mm : 9 mm : 9 mm : 7 mm : 7 mm : 5 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3250 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened roll ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 21800 € : 418.56 € : 1270 mm : 5 mm : 5 mm : 4 mm : 5 mm : 4 mm : 4 mm : 3 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3020 mm : 1150 mm : 1110 mm : 2150 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Italien : 20960 € : 402.43 € : 40 to : 250 mm : 200 x 20 mm : 1100 x 620 mm : 55 mm : 4,7 - 9,1 mm/s : 45 mm/s : 45 l : 3 kW : 950 mm : 1250 mm : 900 mm : 1000 mm : 750 kg 2 holder pins, height 110 mm (higher ones on request) Manual stop 500 mm with millimeter scale Adjustable speed 2 handwheels for adjusting the stroke and retraction point Precise hydraulic stroke adjustment, even under pressure Two-hand operation Huge range of tools, prices on request ALTERNATIVE: Version with CNC control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111500 € : 2107.35 € : 3100 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 6000 mm : 2200 mm : 1900 mm : 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommend ...

tube: 6000 mm tube diameter: 42 x 3,0 mm wall strength: 3,0 mm bending radius min.: 150 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 7500 x 1.400 x 1.300 m Round steel tube: up to Ø 42 × 3.0 mm Round stainless steel tube: up to Ø 42 × 2.0 mm Square tube: 25 × 2.5 mm Max. section modulus: 4.1 cm³ Bending angle: up to 180° + 10° overbending Bending time at 90°: 2.7 sec. (forward stroke) Longitudinal feed speed: 450 mm / 1.5 sec. Rotary positioning speed at 90°: 1.0 sec. Repeatability of bending axis: ± 0.2° Controlled length tolerance: ± 0.3 mm Controlled rotation tolerance: ± 0.2° Tube loading length / usable length for mandrel bending: 4,100 mm Max. radius range: 150 mm Bending height: 850 mm Free-standing bending head: 850 mm long Bending axis drive: electro-hydraulic Rotation and length positioning: automatic via gear ...

For sale is a new ROUNDO PASS 205 4-roll sheet metal bending machine from the Swedish manufacturer ROUNDO AB. The machine was delivered in 2011 and has a working size of 3000 × 4 mm. Machine data: Manufacturer: ROUNDO AB, Hässleholm, Sweden Model: PASS 205 wCNC² Machine Type: 4 Roll Sheet Metal Bending Machine Machine No.: 06764 Year of delivery: 2011 Operating hours: 216 h Capacity: 3000 × 4 mm Control: CNC - Hydraulic roller adjustment - Top roll diameter: Ø 205 mm - Pinch roll diameter: Ø 205 mm - Side roll diameter: Ø 160 mm - Motor power: 5.5 KW Minimum bending diameter: approx. 225 to 290 mm (strongly dependent on sheet thickness and material properties; usually 1.1 to 1.4 times the upper roll diameter) Weight: approx. 5,500 kg Features & Features: -Modern CNC control for precise and reproducible bending processes -Programmable bending programs  ...

Max. bending capacity: 220 kN (22t) Tool height: 120 mm Weight: approx. 500 kg

According to photos, weight estimated Auction-ID: A1-48554-156

Key data: 1020 mm, 1 mm

in good condition, wire inserts, rebate groove Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 1020 mm Sheet thickness max. steel 1.0 mm Farbe/Colour grün Weight/Weight 250 kg Dimensions 1700 x 500 x 1160 mm Number of round rollers 3 pieces Roller diameter 65 mm

Key data: 1030 mm

with wire inserts, conical rounds, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 1030 mm Sheet thickness max. steel 0.6 mm Farbe/Colour grün Weight/Weight 220 kg Dimensions 1290 x 600 x 1050 mm Lower roller diameter 40 mm Top roller diameter 40 mm Number of round rollers 3 pieces Machine number 169

Key data: 1020 mm, 1 mm

used RAS 3-roll round bending machine, with wire inserts, seam groove, transmission gear, Adjustment of the rear roller from the front with scale, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 1020 mm Sheet thickness max. steel 1.25 mm Farbe/Colour grün Weight/Weight 150 kg Dimensions 1300 x 600 x 1100 mm Number of round rollers 3 pieces Roller diameter 56 mm Machine number: 316/10

Profile cassettes and cutting dies for a roll forming line used in the production of trapezoidal sheet profiles. Two different profiles can be produced: H = 158 mm × W = 750 mm H = 153 mm × W = 840 mm Please refer to the photos for further details. Material Capacity Aluminum and steel Material thickness: 0.75 - 1.5 mm Scope of Supply Cassette 1 for Profile 153 and 158 Cassette 2 for Profile 153 and 158 Cassette 3 for Profile 153 and 158 Cassette 4 for Profile 153 Cassette 4 for Profile 158 Cassette 5 for Profile 153 Cassette 5 for Profile 158 Cassette 6 for Profile 153 Cassette 6 for Profile 158 Cutting die for Profile 153 Cutting die for Profile 158 All tooling comes from ongoing production and is being offered for sale due to a product change within the manufacturing operation. Please note: The offer includes the profile cassettes and cutting dies onl ...

Cold bending: flat steel 100 x 5 mm, square steel 16 x 16 mm, round steel 18 mm, angle steel 60 x 8 mm - Hot bending: flat steel 100 x 15 mm, square steel 30 x 30 mm, round steel 30 mm, angle steel 100 x 12 mm, equipped with eccentric quick-clamping device, readable bending angle up to 120 degrees, angle stop, lever and bending templates, material stop, delivered in original packaging Auction-ID: A1-48552-139

excluding machine clamp, delivered in original packaging Auction-ID: A1-48552-65

Press brake, bending machine, swing bending machine, die bending machine -Manufacturer: LOTZE Swivel bending machine with segmented upper jaw type 1512000 3.5 -Drive: mechanical, cam control semi-automatic -Max. working width: 2000 mm -Max. sheet thickness: 3.5 mm -Max. intermediate dimension: 180/280 mm -Accessories: 12 segmented upper cheek splints, 3 upper cheek splints -Connected power: kW -Dimensions: 3350/1250/H1600 mm -Weight: kg

3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ------- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable ...

mounted on profile steel frame; including hydraulic unit; including accessories; Auction-ID: A1-49001-51

Die EVO ist die neueste Innovation in der Blechbearbeitung. Sie ist mit zahlreichen innovativen und patentierten Funktionen ausgestattet, die Ihre Produktionskapazität und Produktivität erhöhen, und weist gleichzeitig die niedrigsten Gesamtbetriebskosten auf. Die hochwertigen Komponenten, die bei dieser Maschine verwendet werden, sowie die neueste Version der BENDtronic®-Steuerung, welche serienmässig auf allen EVO-Maschinen installiert ist, sind besondere Highlights. Ab Lager verfügbar: HAEUSLER EVO 31031 4-Walzen Rundbiegemaschine / Walzenbiegemaschine Hersteller: Haeusler Typ: EVO 31031 4-Walzen Rundbiegemaschine / Walzenbiegemaschine Ursprung: Deutschland / Schweiz Baujahr: 2024 Zustand: NEU, Austellungsmaschine Verfügbarkeit: sofort Leistung: Arbeitsbreite 3100 mm Rundbiegeleistung 14 mm Anbiegeleistung 12 mm Nicht die Passende Maschine? Als Vertreter von Haeusl ...

Hydraulic bending machine 400 kg Auction-ID: A1-48648-41

Tube bending machine including molds Capacity up to 1 ton Auction-ID: A3-46152-19418

tube diameter: 406.4 - 1625.6 mm wall strength: 9 - 60 mm bending radius min.: - mm pressure: 10000 t tube: 8000 - 12000 / 16000 mm Plate thickness: 9 - 60 mm distance between columns: mm control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The HYUNDAI-WIA JCO Press Bending Machine is a heavy-duty industrial hydraulic press used to form large-diameter, longitudinally seam-welded (LSAW) steel pipes. Sequential Shaping: The machine bends a flat steel plate step-by-step into a pipe shape. It first presses the edges into a J shape, then curves them further into a C shape, and finally closes them into an O shape • Year of Modernization: 2025 1. Edge Milling Machine 2. Pre Bending Machine 3. In Feeder 4. JCO Press Bending Machine 5. Tack Welding Machne 6. Insdie Welding Machine 7. Outside Welding Machine 8. 4-way (Inpending) Machine 9. End Facin ...

Stock No.: 26241 Hydr.-NC pipe bending machine Technical data: - Bending capacity for mandrel bending steel up to Ø 60 X 4 mm - Bending capacity for mandrel bending VA up to Ø 60 X 2.6 mm - Mandrel bending device, bending length up to 6000 mm - Max. bending angle 0 - 180 ° - Overbending + 10 ° - Largest average bending radius 230 mm - Smallest inner bending radius 1.5 X D 34 mm - Autom. Pipe feed with controlled twisting unit - Drive 400 V / 7.5 kW - Space requirement approx. W 7500 x H 1200 x D 1300 mm - Weight approx. 1800 kg with - bending angle programming - Digital bend angle display + bend angle fine adjustment - various bending tools approx. Ø 26.9 RM 40 + 54; Ø 26.9 RM 54 ; - Ø 33.7 RM 67 Ø 42.4 RM 60 + 85 , Ø 48.3 RM 96 , - Ø 60 RM 120 , Ø 40 RM 170 , Ø 22 RM 33

Key data: 80 t

IMPORTANT: If you are interested, please contact us by phone. Location of the machine on request Sale preferably from location, buyer organizes transport A high-precision and flexible 8-axis CNC press brake from the market leader Amada is being sold. The machine is in first-class, operational condition and has been professionally serviced on a regular basis. 8 controlled axes for complex bending sequences without time-consuming changeovers equipped with the latest AMNC 3i multi-touch control including extensive cabinet Press force: 80 tons / bending length: 2,500mm VHB on request - unrealistic offers will be ignored!

Machine number: 4444 incl. foot switch Reference: Steinbach & Holler - Lot 54 Auction-ID: A7-49056-134

Auction-ID: A3-46152-9097

Power: N/C (electro-pneumatic system) Operating parameters: Workpiece length 250–2,500 mm; max. width 1,200 mm; automatic longitudinal + transverse feeding; electropneumatically controlled cross scale Workpiece capacity: Panels/components of varying dimensions; suitable for furniture & wood processing lines Supported edges: Wood-based panels, MDF, chipboard, plywood (typ.) Edge types: Feeding, positioning, transfer Included equipment: Fully automatic WZ10 pulling system; air cushion table; cross alignment scale; integrated control system Compliance: Industrial woodworking equipment; CE N/C Power supply: Electric + compressed air (electro-pneumatic) Year/Manufacturer: HOMAG – PROFI TBL 100/35/12 Remarks: Designed for automatic handling and precise positioning of workpieces in longitudinal and transverse direction Automatic feeding table with WZ10 system for ef ...

In original transport box with various accessories Auction-ID: A1-49016-14

With Format smartouch control panel, 3x air infeed table, 4-fold outfeed belt conveyor 2x various roller conveyors, 1x conveyor belt size 900x7000mm Auction-ID: A1-48377-5

With Format smartouch control panel, U-motion driven roller conveyor unit dimensions approximately 2050x2200mm, belt conveyor dimensions 880x4170mm and roller conveyor dimensions 890x1950mm Auction-ID: A1-48377-24

Shannon HRP300 Extra cables provided Original manual available Hand protection Foot pedal Heating elements included Material pleats from 2mm to 25mm 220V or 380V Automatic opening with timer Auction-ID: A3-46152-19423

with CNC control and programmable bending angles Control voltage: 24 V-2.8 A tubes Outer diameter up to approx. 16 mm. Auction-ID: A7-49604-34

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5700 € : 110.01 € : 1550 mm : 1 mm : 68 mm : 1.5 kW : 2110 mm : 700 mm : 1160 mm : 400 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending length: approx. 2100 mm Roller width: approx. 150 mm Reference: Zafa - Lot 15 Auction-ID: A7-49882-102

Pipe Bending and Notching Machine Set – JD2 Model 32 + JD2 Notch Master Description Complete pipe processing set consisting of a JD2 Model 32 pipe bending machine and a JD2 Notch Master pipe notching machine. The system enables the complete fabrication of pipe structures – from bending to precise joint preparation. Technical Specifications Manufacturer: JD Squared (USA) Tube Bending Machine – Model 32 • Mechanical drive (ratchet system) • Maximum bending angle: 180° • Tube diameter: approx. Ø12 – Ø63 mm • Robust industrial design Tools included: • Dies for 22 mm and 25 mm tubes Other die sizes are available for this model Pipe notcher – Notch Master • Hole saw cutting system • Adjustable angle: 0–50° • Tube diameter: approx. Ø19 – Ø76 mm • Precision bearing construction Features • Complete system: Bending + connection preparatio ...

Ring diameter: 350 mm Ring thickness: approx. 100 mm with a larger batch of other different rings Attention: Machine can be transported on a standard truck Reference: Zafa - Lot 2 Auction-ID: A7-49882-95

Hilmor Rotary Hydraulic No. 3 Hydraulic Pipe/Tube Bender – up to 2 Inch – Electric Hydraulic Unit Professional Hilmor Rotary Hydraulic No. 3 hydraulic pipe/tube bending machine for cold bending of various types of metal pipe and tube. Specifications: Brand: Hilmor Type: Rotary Hydraulic No. 3 Machine: Hydraulic Pipe/Tube Bender Serial number: presumably RH3/3411 Maximum capacity: up to 2 inches, depending on tube type Gas/steam pipe: 1/2–2 inch nominal bore, BS 1387 Thin-walled copper/steel pipe: 1–2 inch diameter Electrical conduit: 3/4–2 inch OD Bending principle: rotary hydraulic Bending angle: adjustable, with degree graduation Hydraulic unit: Lancashire Crypto Power Jacks Ltd. Hydraulic unit engine power: 0.75 hp / approx. 0.55 kW Power supply: 3-phase, 220/380/440 V, 50 Hz Engine speed: 2,850 rpm Year hydraulic unit: 1965 Features: Hydraulic cyl ...

Serial number: 223084 max. sheet width: approx. 1000 mm with mechanical hand lever operation Reference: Walter - Lot 193 Auction-ID: A7-49834-28

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11800 € : 226.56 € : 1050 mm : 5 mm : 130 mm : 3,5 m/min : 2.2 kW : 2200 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various lengths including L60 x W25 cm. Auction-ID: A1-49846-141

Including various accessories and bending machines. Auction-ID: A1-49846-47

With foot control. Includes various bending tools and accessories. Auction-ID: A1-49846-25

tube diameter:40-90 mm wall strength:20 mm weight of the machine ca.:11 t dimensions of the machine ca.:4 x 1,6 x 1,35 m bending radius max.:270 mm This machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure va ...