horizontal bending machine used for sale

Horizontal turning machine manufactured in 2008. This Mazak Quick Turn Nexus 100-II features a maximum turning diameter of approximately 280 mm and a turning length of about 335 mm. It includes a 12-position drum turret and a programmable tailstock. Known defects: Spindle fault: Alarm 44 SPINDEL ERROS 3 - Machine must warm up before machining, then operational. Repair costs according to quote approx. 2,800 EUR. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Nexus 100-II machine we have for sale. Contact us for further details regarding this machine.

Geibel & Hotz FS 1050 GT SL Surface Grinding Machine Working range grinding length (max.) 1,000 mm Grinding width (max.) 500 mm X-axis (longitudinal) longitudinal table stroke 50 – 1,050 mm Table speed 0.001 – 35 m/min (infinitely variable) Y-axis (vertical) Distance table to spindle center 180 – 625 mm (optionally up to 825 mm) Perpendicular speed 50 – 4,000 mm/min Z-axis (transverse) transverse travel (max.) 500 mm Grinding spindle Grinding wheel dimensions 400 x 100 x 127 mm (Ø x width x bore) Spindle drive (standard) approx. 11 kW Max. speed up to 2,380 rpm / 35 m/s Weight & installation Total weight of the machine approx. 4,500 kg Max. table load approx. 1,380 kg Various accessories according to photos: - Grinding wheel mounts - Documentation in detail - Hoffmann Grinding Wheel Adjustment Scale If you have any questions, please contact us at Tel. 017 ...

grinding length: 600 mm grinding width: 375 mm workpiece height: 325 mm grinding height: 325 mm table load: max. 300 kg table longitudinal travel: max. 650 mm table speeds: 1 - 30 m/min grinding spindle speed: 1440/2900 U/min grinding wheel size: 300 x 50 x 76,2 mm grinding spindle drive: 3,7/4,7 kW vertical feed grinding spindle max.: 180 mm/min. cross travel: 350 mm cross adjustment: 1 - 40 mm rapid traverse cross: 1200 mm/min total power requirement: 9 kW weight of the machine ca.: 3,3 t dimensions of machine L x W x H: 2,75 x 2,10 x 2,05 m - with autom. positioning - Accessories: magnetic plate 600 x 350 mm, grinding wheel with flange, wheel trueing attachment, DRO on Y- and Z-axis, 1 grinding wheel with flange separate, balancing scale, wet grinding attachemnt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 450 mm grinding width: 250 mm workpiece height: 275 mm table surface area: 550 x 200 mm distance spindle center to table: max. 400 mm table speeds: 0 - 30 m/min cross feed: 0 - 60 mm/Hub rapid traverse cross: 1,2 m/min grinding wheel size: ø 250 x 30 x ø 51 mm grinding spindle speed: 1400 / 2800 U/min total power requirement: 4 kW weight of the machine ca.: 1 t dimensions of machine L x W x H: 1,55 x 1,23 x 1,80 m Accessories: magnetic plate 450 x 200 mm, grinding wheel with flange, wheel trueing attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 450 mm grinding width: 250 mm workpiece height: 275 mm table surface area: 760 x 200 mm distance spindle center to table: max. 400 mm table speeds: 0 - 30 m/min cross feed: 0 - 60 mm/Hub rapid traverse cross: 1,2 m/min grinding wheel size: ø 250 x 30 x ø 51 mm grinding spindle speed: 1400 / 2800 U/min total power requirement: 4 kW weight of the machine ca.: 1 t dimensions of machine L x W x H: 1,55 x 1,23 x 1,80 m Accessories: magnetic plate 450 x 175 mm, grinding wheel with flange, wet grinding attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Large ELB horizontal surface grinding machine with long magnetic table, wheel head, coolant equipment and control panel. Heavy industrial grinder, suitable for large flat parts. Auction-ID: A1-51153-51

GeneralHorizontal machining center; Control: Siemens S840Dsl with CELOS CharacteristicsSpeed max.-20000 rpmDrive power (100% DC)25 kWDrive power (40% DC)42 kWTable size400x400 mmSwivelling range360x1 degreeMaximum load (table centre)400 KgMax. work piece diameter630 mmMax. work piece height900 mmPalett changer with2 PalletMovement X / Y / Z560/560/660 mmRapid feed X / Y / Z60/60/60 m/minTool Magazine with60 PositionsSpindle taperHSK-A 63 Max. tool length450 mmDimensions (L x W x H)2,68 x 4,19 x 2,54 mWeight approx.8500 KgPreparation for Center Through-spindle coolant systemCenter Through-Spindle Coolant System It can supply coolant through the holes of the spindle and tool. The coolant supply path to the tool tip is a center-through type. Effective for removing chips, cooling a machining point and prolonging a tool life. Spindle Taper HSK-A63Spindle Taper HSK-A63 This specification uses ...

GeneralHorizontal machining center; Control: Siemens S840Dsl with CELOS CharacteristicsSpeed max.-15000 rpmDrive power (100% DC)30 kWDrive power (40% DC)46 kWTable size400x400 mmSwivelling range360x1 degreeMaximum load (table centre)400 KgMax. work piece diameter630 mmMax. work piece height900 mmPalett changer with2 PalletMovement X / Y / Z560/560/660 mmRapid feed X / Y / Z60/60/60 m/minTool Magazine with60 PositionsSpindle taperHSK-A 63 Max. tool length450 mmDimensions (L x W x H)2,68 x 4,19 x 2,54 mWeight approx.8500 KgHigh-torque spindle 46 /30 kW, 15,000 min-1High-torque spindle 46 /30 kW, 15,000 min-1 (SIEMENS) Preparation for Center Through-spindle coolant systemCenter Through-Spindle Coolant System It can supply coolant through the holes of the spindle and tool. The coolant supply path to the tool tip is a center-through type. Effective for removing chips, cooling a machining poin ...

GeneralHorizontal machining center Chip conveyor (ejection to the rear) Coolant gun for setup station side Oil skimmer Sludge collecting function inside coolant tank In-machine measuring system (spindle) touch sensor (Renishaw OMP60) + workpiece setter Tool breakage detection system Manual pulse generator (separate type) Full closed loop control (Scale feedback); Control: Control F31iB with CELOS CharacteristicsSpeed max.-12000 rpmDrive power (100% DC)30 kWTable size630 x 630 mmSwivelling range360 x 1 degreeMaximum load (table centre)1500 KgMax. work piece diameter1050 mmMax. work piece height1300 mmPalett changer with2 PalletMovement X / Y / Z1050/900/1030 mmRapid feed X / Y / Z60/60/60 m/minTool Magazine with60 PositionsSpindle taperBT 50 Weight approx.18750 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with m ...

GeneralHorizontal machining center Chip conveyor (ejection to the rear) Coolant gun for setup station side Oil skimmer Sludge collecting function inside coolant tank In-machine measuring system (spindle) touch sensor (Renishaw OMP60) + workpiece setter Tool breakage detection system Manual pulse generator (separate type) Full closed loop control (Scale feedback); Control: Control F31iB with CELOS CharacteristicsSpeed max.-12000 rpmDrive power (100% DC)30 kWTable size630 x 630 mmSwivelling range360 x 1 degreeMaximum load (table centre)1500 KgMax. work piece diameter1050 mmMax. work piece height1300 mmPalett changer with2 PalletMovement X / Y / Z1050/900/1030 mmRapid feed X / Y / Z60/60/60 m/minTool Magazine with120 PositionsSpindle taperHSK-A 100 Weight approx.18750 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control w ...

grinding range: 1000 mm Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical details Manufacturer: PAND d.o.o. Model: FLP-100-3 (based on BG-320B platform) Type: Horizontal flow packaging machine Year: 2020 Serial number: 205182017 Power: 2.4 kW Power supply: 220 V, 50 Hz Packing speed: 40–200 packs/min Product size: - Length: 150–330 mm - Width: 50–140 mm - Height: 1–50 mm Configuration: - Adjustable infeed conveyor - Film unwinding system - Longitudinal sealing unit - End sealing unit - Photoelectric registration sensor - XINJE touchscreen HMI - Electrical control cabinet Application: - Automatic horizontal flow wrapping of food and non-food products Construction: - Stainless steel product-contact components - Integrated flow-pack packaging system Dimensions: - Length: 3770 mm - Width: 720 mm - Height: 1400 mm Weight: 400 kg Condition: Used Observed condition: - Clean industrial condition - Machine appears co ...

Technical details Manufacturer: PAND d.o.o. Model: FLP-100-2 (based on BG-250B platform) Type: Horizontal flow packaging machine Year: 2020 Serial number: 205182016 Power: 2.4 kW Power supply: 220 V, 50 Hz Packing speed: 40–230 packs/min Product size: - Length: 65–190 mm - Width: 30–110 mm - Height: 1–40 mm Configuration: - Adjustable infeed conveyor - Film unwinding system - Longitudinal sealing unit - End sealing unit - XINJE touchscreen HMI - Electrical control cabinet Application: - Automatic horizontal flow wrapping of food and similar products Construction: - Stainless steel product-contact components - Integrated flow-pack packaging system Dimensions: - Length: 3770 mm - Width: 670 mm - Height: 1400 mm Weight: 370 kg Condition: Used Observed condition: - Clean industrial condition - Machine appears complete - HMI, film transport and seali ...

Auction-ID: A1-51321-3

Technical details Manufacturer: Unknown (OEM) Model: BG-320B Type: Horizontal flow packaging machine Year: 2020 Serial number: 205182018 Power: 2.4 kW Power supply: 220 V, 50 Hz Packing speed: 40–200 packs/min Product size: - Length: 150–330 mm - Width: 50–140 mm - Height: 1–50 mm Configuration: - Adjustable infeed conveyor - Film unwinding system - Longitudinal sealing unit - Rotary end sealing unit - Photoelectric registration sensor - XINJE touchscreen HMI - Electrical control cabinet Application: - Automatic horizontal flow wrapping of food and non-food products Construction: - Stainless steel product-contact components - Integrated flow-pack packaging system - Integrated and CE-labelled by PAND d.o.o. (Serbia) Dimensions: - Length: 3770 mm - Width: 720 mm - Height: 1400 mm Weight: 400 kg Condition: Used Observed condition: - Machine appears ...

General Description Horizontal flow packaging machine suitable for packaging individual food and non-food products. Manufactured in China and supplied by PAND d.o.o. (Kragujevac, Serbia), which acted as the local integrator/CE assembler. The machine is designed for high-speed horizontal flow wrapping applications. Technical Details Original manufacturer: Unknown (Made in China) OEM model: BG-400D PAND designation: FLP-100-1 Production year: 2020 OEM serial number: 205182019 Power supply: 220 V, 50 Hz Installed power: 2.4 kW Packing speed: 40–180 packs/min (PPM) Product dimensions:   - Length: 130–320 mm   - Width: 80–180 mm   - Height: 1–65 mm Condition Used industrial condition. Complete machine with integrated control system and conveyor. Operational status has not been tested. Dimensions Length: 4,020 mm Width: 800 mm He ...

Ulma FR 200 The electronic, automatic flow wrapper type ULMA FR 200 has been specially developed to pack a variety of different products in flat bags (flow-pack) or pillow packs. Technical Specifications Model No.: FR 200 Condition: Used (Overhauled by ULMA Germany) Year of Make: 2022 Capacity: Up to 70 packs/minute (depending on film/paper and product properties). Packaging Type: Flowpack Machine equipment Length of infeed belt: Free insertion distance 2500 mm Features ✅ Stainless steel version ✅ Photocell for printed film ❌ Label dispenser ❌ Printers ✅ Signal for printers / labellers ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700mm) ✅ Cross sealing except for high products (max. 160mm) Width sealing bar 300mm ✅ Beret system due to the cross-sealing for heavy bowls ✅ Function No product / No bag ✅ Suitab ...

Machine is in working condition, only the stop button needs to be replaced Auction-ID: A3-46110-5787

Danobat Sawing Machine Effective Leaves due to renovation Always maintained Own cooling circuit 10 extra saw blades available Assistance with loading for transport is possible Auction-ID: A3-46110-19544

FORTE KST APG 0413 sawing machine Cutting Capacity (Round): Up to 410 mm in diameter Cutting Capacity (Square): Up to 410 x 410 mm Maximum Single Feed Length: Approx. 500 - 600 mm (automatically repeatable for longer lengths) Blade Development Dimensions: Approx. 5,800 x 41 x 1.3 mm Blade motor power: 5.5 - 7.5 kW Complete with chip conveyor Total Machine Weight: About 2,800 kg Floor Dimensions (L x W x H): Approx. 2,900 x 2,200 x 2,100 mm Auction-ID: A7-51375-34

GeneralHorizontal Machining Centre; Control: Fanuc F31iB CharacteristicsSpeed max.-14000 rpmDrive power (100% DC)11 kWDrive power (40% DC)18,5 kWTable size400x400 mmSwivelling range360x1 degreeMaximum load (table centre)400 KgMax. work piece diameter630 mmMax. work piece height900 mmPalett changer with2 PalletMovement X / Y / Z560/560/630 mmRapid feed X / Y / Z50/50/50 m/minTool Magazine with40 PositionsSpindle taperBT 40 Max. tool length400 mmDimensions (L x W x H)2,36 x 3,92 x 2,72 mWeight approx.9600 KgSpecial equipmentJ-011462 Tool holder taper for BT-40 tool holders J-011460 Max. spindle speed 14,000 rpm, 18.5/11 kW J-011470 Scraper-type chip conveyor with drum filter, rear discharge J-007252 CTS (DIN Form B) coolant supply through the spindle J-011461 40-station tool Special equipmentJ-001212 Coolant gun for the operator side J-003686 Manual pulse generator, handwheel (separate typ ...

Heavy-duty industrial horizontal metal-cutting bandsaw manufactured by TOS / KMPK Hradec Králové, Czechoslovakia. Specifications / details: Application: Metal cutting Horizontal saw configuration Integrated material vice/clamping system Adjustable material stop/guide Manual vice and positioning controls Enclosed belt/pulley drive section Heavy cast machine base Coolant/fluid system components visible The machine is a traditional workshop-type horizontal bandsaw intended for cutting steel bars, tubes, profiles and other metal stock. Auction-ID: A1-51282-134

Auction-ID: A1-51062-38

grinding length: 800 mm grinding width: 400 mm workpiece height: 550 mm table dimensions: 1.200 x 400 mm speed spindle max.: 1.000 U/min. feed x-axis: 40.000 mm/min total power requirement: kW weight of the machine ca.: 4,10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A3-46115-21031

Hugo Beck Servo X 800 Horizontal Film Form Fill & Seal Machine (2021) 15,000 packs/hour Automatic plastic film loading system Auction-ID: A1-51927-6

Equipped with: miter saw function, material clamp, including 4x roller conveyor 2000x380x1000mm, manual and extra saws available, according to specification defective. Auction-ID: A1-50997-2

Band sawing machine used Manufacturer: KALTENBACH Type: KBS 750 NA Material Dimensions in the cutting opening 750 x 500 mm Power: 5.5 kW 380V Total dimensions approx. 24 x 18 x 4.5 m The system has been dismantled! Weight approx. 14t approx. at least one semi-trailer is required for transport. Attention! Location Riesa! Viewing on 20.11.26 only with prior registration at r.schober@kobran.de! Changes and errors in the technical data, specifications and prices reserved. Attention! We load for you. You just need to organize a transport.; For this service, the additional costs shown are.; Auction-ID: A1-51900-86

Double miter, hydraulic material clamp, including 2x Bomar M-A/RA roller conveyor (2 pieces of 640x40x94cm) saw bands and documentation, Auction-ID: A1-50997-5

Brunetti EFH350D/I horizontal flowpack packaging machine. Stainless steel construction, film feeding by upper reel. For packaging of food and non-food products. New, unused equipment. Net dimensions: 4020 x 770 x 1410 mm. Net weight: 500 kg. Auction-ID: A7-51454-1

Double bench grinder used Manufacturer: REMA Type: DS 07/ST Disc size max: 175/60/5 Power: 0.5 kW 2900 rpm 220/380V Total dimensions: approx. 850 x 350 x 1100 mm Changes and errors in the technical data, specifications and prices reserved. Viewing on 20.11.26 only with prior registration at r.schober@kobran.de! Attention! We dismantle and load for you. You just have to organize a transport.; For this service, the additional costs shown are.; Auction-ID: A1-51900-42

Automatic cartoning machine with alternating motion for vials, jars, tubes, bags, blister packs Equipped: - Adjustable bucket chain with interchangeable shims - Store pre-folded cases - Pre-folded leaflet store - Product introduction station with instructions in the cartons by pusher - Transfer of the cases by chains with adjustable combs. - Case closing station - Evacuation of finished cases - General drive by motor-variator - Protective guards with safety Current tools: Cases with alternating legs Capacity: Case dimensions: Minimum length 50 mm - maximum 170 mm Minimum width (pitch) 18 mm - maximum 100 mm Minimum height 12 mm - maximum 55 mm Maximum production: approximately 120 cartons/minute depending on the nature of the products Total electrical power: 1.5 kW Maximum compressed air pressure: 6 bar Auction-ID: A1-51318-230

Workpiece changing table, Bh machine 30.092, Bh spindle 12.296, control, tool changer Pickup plate with 20 tool positions, dimensions clamping table approx. 2,000 x 1,150 mm, travel A-axis 180 degrees swivel beam, B-axis 192 degrees, C-axis 372 degrees, incl. 1 pc machine extraction Hurrican see appendix, and 1 pc vacuum filter system Hurrican F 19/900-PL06/7-K10 for the grinding table and manual suction. The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-51921-9

Cutting range round: 10 - 260 mm max cutting area square: 260 x 260 mm min.max Section length: 5 mm/ 600 mm Feed length: 600 mm Min. offcut length: 10 mm max Cutting speed: 125 m/min Saw blade dimensions: 4115 x 41 mm x 1.3 mm incl. roller conveyor Auction-ID: A1-52097-42

Equipped with: (1x) infeed roller conveyor: Length 6000 x Width: 360mm, Working width: 290mm (1x) discharge roller conveyor: Length 3000 x Width: 300mm, Working width: 210mm. Auction-ID: A1-51283-15

MAZAK HCN 5000 III – 2019 CNC control: MAZATROL SMOOTH G X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Pallet dimensions: 500 × 500 mm Maximum pallet load: 700 kg Pallet indexing: 360,000 positions Tool magazine: 80 tools Spindle speed: 18,000 rpm Spindle motor power: 30 kW Tool probe Spindle through-coolant: 15 bar RENISHAW preparation Electronic handwheel CONCEP chip conveyor Condition: As is

Workpiece changing table, Bh machine 30.092, Bh spindle 12.296, control, tool changer Pickup plate with 20 tool positions, dimensions clamping table approx. 2,000 x 1,150 mm, travel A-axis 180 degrees swivel beam, B-axis 192 degrees, C-axis 372 degrees, incl. 1 pc machine extraction Hurrican see appendix, and 1 pc vacuum filter system Hurrican F 19/900-PL06/7-K10 for the grinding table and manual suction. The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-51921-9

GeneralHorizontal machining center; Control: Control F31iB with CELOS CharacteristicsSpeed max.-20000 rpmDrive power (100% DC)18,5 kWDrive power (40% DC)26 kWTable size500x500 mmSwivelling range360x1 degreeMaximum load (table centre)500 KgMax. work piece diameter800 mmMax. work piece height1000 mmPalett changer with2 PalletMovement X / Y / Z730/730/880 mmRapid feed X / Y / Z60/60/60 m/minTool Magazine with60 PositionsSpindle taperBT 40 Max. tool length550 mmDimensions (L x W x H)3,08 x 4,79 x 2,86 mWeight approx.12000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p High-speed spindle 20,000 min-1, 37/ 26/ 18.5 kWHigh-Speed Spindle 20,000 min-1, 37/26/18.5  ...

GeneralHorizontal Machining Centre in travelling column construction; Control: 3D Control Siemens 840D solutionline operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal630 mmCross800 mmVertical850 mmPackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis) Main driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range -12000 rpmSpindle taper HSK-A 63 CabineFull protection cabin Direct measuring systemDirect path measuring system NC rotary table with pallet changerTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmRo ...

max. wheel diameter:80/120 mm max. module:2,5 max. top circle diameter:65 mm :22 mm :140 mm :120 mm slide travel axial ( Z-axis ):320/400 mm Dimensions (L/W/H):3270 x 3240 x 2020 mm weight of the machine ca.:6 t P60 - The compact all-rounder for wheels, shafts and worms The P60 is the smallest machine in the Gleason line of horizontal hobbing machines. The all-rounder not only mills spur gears with all rollable profiles, but is also the optimal solution for machining steering pinions and worms. with automatic loading system, extraction unit, chip conveyor, with balancing device with 2 tailstocks, with Artec process monitoring system, type CTM-BT1.1

grinding length:450 mm grinding width:250 mm workpiece height:280 mm Table area:760 x 250 mm grinding spindle drive:2,5 kW grinding wheel dia. x width:250x 25 mm grinding spindle speed:1430/2900 U/min way of grinding spindle saddle, vertical:400 mm total power requirement:4,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:1,8 x 1,4 x 2,0 m Machine equiped with magnetic plate - dresser

grinding length:450 mm grinding width:250 mm workpiece height:280 mm Table area:760 x 250 mm grinding spindle drive:2,5 kW grinding wheel dia. x width:250x 25 mm grinding spindle speed:1430/2900 U/min way of grinding spindle saddle, vertical:400 mm total power requirement:4,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:1,8 x 1,4 x 2,0 m Machine equiped with magnetic plate - dresser

honing diameter:51 mm stroke:300 mm spindle speeds::600 - 3000 U/min feed range:1500 - 5000 mm/min spindle drive:1,1 kW weight of the machine ca.:0,8 t total power requirement:4 kW dimensions of the machine ca.:1,1 x 1,9 x 1,5 m

honing diameter:45-200 mm stroke:330 mm centre height:350-700 mm Motor output:1,5 kW Drill rods: Ø 60mm ? 3000mm long Ø 50mm ? 2600mm long Ø 42mm ? 1920mm long Ø 40mm ? 1920mm long Ø 26mm ? 1270mm long Ø 24 mm ? 1,000 mm long Ø 20 mm ? 2,000 mm long Typical features Feed: Infinitely variable in both directions Drive: Separate control of spindle rotation and vertical movement Centring: Manual or via dial gauge centring bridges Geometry & working range (approximate values based on the BO series) Drilling range (Ø): approx. 24 mm to 150 mm (depending on the drill rods and cutter heads used) Distance from table to centre of spindle: Variably adjustable (typically approx. 350 mm to over 700 mm for large commercial vehicle engine blocks)

x-travel:60 mm The RIMAC BETAMATIK is a specialised collector mica milling machine for the manufacture and repair of electric armatures and commutators. It is used for the precise milling or undercutting of the mica insulation between the individual copper lamellae of a collector. The mica joints are detected by a laser optical system. A stepper motor then automatically positions the armature from lamella to lamella. The milling cutter is automatically raised during the return stroke. According to the data sheet, the machining time is approximately 0.8 to 1.3 seconds per lamella. The machine can process armatures up to a diameter of 100 mm, collectors up to 70 mm in diameter and shafts up to 500 mm in length. The maximum milling length is 60 mm. The milling spindle reaches 8,000 rpm. The machine, originally purchased around 1983/1984, was extensively modernised and mechanically overhaule ...

3-roll hydraulic with dual pre-pinch planetary configuration. new to complete, 45 days from order. -Plate width 3000 mm -Capacity rolling plate thickness 50 mm -Pre-pinch plate thickness 40 mm Machine configuration and accessories installed: -useful surface length on the rolls 3100 mm -upper roll size 480 mm -lower rolls size 440 mm -Digital position readouts. -Hardening treatment of the 3 rolls. -3 rolls driven hydraulic motorized with independent axial gear box on each roll. -Conical plate bending attachment with tiltable lower rolls hydraulic. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation instruction manuals. -Hydraulic diagrams -Electric & electronic schematics with parts list. -Set of service tools for maintenance. -Electric power installed 50Hp. -3 phase voltage to be specified Warranty 12 months.  ...

Technical data: maximum sheet width: 3000 mm maximum plate thickness at maximum yield of 240 N / mm² on bending: 35 mm On bending length: 2,2 x S Diameter of roller upper roller: 552 mm Bottom roll: 532,4 mm Side rolls: 400 mm

Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg

hydraulic concrete steel Benders Krupp Futura B 703 steel bending machine with accessories and complete instructions Tech. Data performance table - steel 50-55 kp/mm2 Diameter 22 mm - 6 bars per bending, 28 mm-4, 32 mm 3,. Mtfgtw 50 mm 2 speed 4-12 / min Operation - with control or manual, operating dial - HAND - machine with possibility of 3 bending angle set - every page - 3 links + 3 right complete documentation, operating instructions much accessories more info upon request You can edit, flat, round steel accessories - various bending rollers, bolts, reducing roll, Overarm and the machine has device for Pipes. Bulk 2.3 x 1 x 1 m, Btto 1500 kg