horizontal bending machine used for sale

Tig welding machine DALEX type GL/W 201TIG welding machineMachine no.: 201 0447 Year of construction approx. 1995Power 200 Amp. 35% ED 160 Amp. 60% ED 120 Amp. 100% EDEinfinitely variable adjustment rangeType DC - DCmains connection 400 Volt, 50 Hz, 5.9 kVA, 32 Amp. Plug- 2-stroke and 4-stroke welding device- TIG hose package 8 meters- HF ignition- Shielded gas pressure reducer- Electrowelding for rod electrodes- Fan cooling- Connection socket for foot switch (without foot switch)Space requirement L x W x H 850

MIG MAG welding machine, arc welding machine EWM type MIG 230Fabr. No.: L/0340 Year of construction 1994Power 230 Amp. = 35 % ED 120 Amp. = 100 % EDEsetting range 8 stepsMains connection 400 volts, 50 Hz, 16 Amp. Plug- 2-stroke and 4-stroke welding device- Spot welding device- 2-roll wire feeder- 3 meter hose package with central connection- Welding gas pressure reducerSpace requirement L x W x H 1000 x 450 x 700 mmWeight 70 kgGood condition; used

TIG and Electric Welding Machine / Inverter ESAB Type LTN 160WIG Welding Machine for TIG and ElectrodeFabr. No. 405-423-0479 Year of construction approx. 2010Power TIG 160 Amp. = 35% ED 110 Amp. = 60% ED 80 Amp. = 100% EDL power electrode 140 Amp. = 35% ED 110 Amp. = 60% ED 80 Amp. = 100% EDNetz connection 230 Volt, 50 Hz, Schuko plug- stepless power adjustment- 2 stroke and 4 stroke operation- Operating mode rod electrode- 12 meter TIG hose package with hand torch- only DC = DC- HF ignition-

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

Stud welding machine KÖCO KÖSTER & CO. Type 601 EWider-stand welding machine with capacitor discharge technologyFabr. No. 5356 Year of construction approx. 1995Maximum welding current 600 Amp.Welding power at 3% ED 600 Amp.Welding power at 100% ED 100 Amp.Bolt diameter 3-8 mmMaximum welding time 550 msMains connection 400 Volt, 50 Hz, 16 Amp. Plug- Welding current adjustment infinitely variable- Welding time adjustment infinitely variable- Welding gun KÖKO K14 with stroke ignition with 2 meter connection cable- 2 pieces of ground cable with 5 meters

Internal threading machine HAGEN & GOEBEL type HG 10Tapping machine, vertical tapping machineMasch. No. 4462 Year of construction approx. 1980Cutting capacity in steel M3 to M10Cutting capacity in cast iron M3 to M16Cutting capacity in brass M3 to M 18 mmProjection 250 mmPine stroke 80 mmTable size 340 x 240 mmSpindle speed 200-1000 rpm. 6 stagesmotor power 0.55 and 0.75 kWNet connection 380 volts, 50 Hz- 6 speed levels by 2 motor speeds and 3 belt steps- thread pitch over

Brush deburring machine, tube deburring machine ERINI type 250Year of construction approx. 1995Brush diameter 250 mmBrush width 25 - 60 mmSpeed 1500 / 3000 rpm. Power 2.2 / 2.8 kWNetz connection 380 Volt, 50 Hz- Material support- new deburring brush- Suction connection 100 mmSpace requirement L x W x H 620 x 500 x 1150 mmWeight 100 kgGood condition; used

Spot welding machine DALEX type SL 16 EAMasch. No. 68611900-5 Year of construction 1986Nominal output at 50 % ED 16 KVASwelding capacity max. 50 KVA charge max. 500 mmElectrode force max. 17 - 278 daNElectrode arm 45 mmElectrode holder 25 mmArm spacing 140 mm / 280 mmCircuit breaker 8 stagesControl 4 times with single and series pointsOperating pressure 1-6 barOpen circuit voltage 1.8 to 3.6 voltsConnected load 37 kVANnet connection 400 volts, 50 Hz- Triggering of the welding cycle via

Roaches 3 Bath Laboratory Glass Dyeing Machine Roaches 3 Bath Laboratory Dyeing Machine 240 V 6500 W 10 A HxWxD= 920 x 1760 x 450 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Machine is in good condition.

Oscillating mortiser with 2 benches BALESTRINI mod. 2CAP

REF-2665 ILPRA FS 2500 V/G AUTOMATIC CUP FILLER-SEALER Manufacturer: ILPRA Series: FILL SEAL Model: FS 2500 V/G FL Serial no.: FS1071 Year: 2017 Automatic rotary filling-sealing machine for cups of different materials. Compact and flexible model, tailored to handle a diverse range of food products from liquids and creams to granules, even with solid particles in suspension. Maximum output of approximately 2,500 pieces per hour. Voltage: 400 V + N Overall dimensions (mm): 2,350 x 1,280 x 2,200 (LxWxH) Weight: approx. 900 kg

Bulk Distribution Station

Used Radial Drilling Machine DONAU Donauflex 145 Year of Make: 2006 Only a few hours of operation. • Drilling capacity in steel 45 mm • Boom travel 1,050 mm • Drilling radius min. 540 mm / max. 1,590 mm • Spindle speed 15 - 2,800 rpm • Tapping device • Tool holder MK 4 • Hydraulic clamping for boom and lifting column • Electromagnetic feed clutch • Machine light

Machine Base Soil Tillage Machine, Floor Cleaning Machine, Floor Curing Machine Base -Manufacturer: Minuteman, Floor Curing Machine Base Machine base floor processing machine -Type: 670238 -Voltage: 230V -Accessories: including transport case, see photos -Transport dimensions: 790/580/H470 mm -Weight: 40 kg

Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Ritmo, socket welding tool set type R 63 TFE -Voltage: 230V -Power: 1400W -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 450/350/H130 mm -Weight: 8.4 kg

From a current recycling we offer you 2 used column drilling machines / thread cutting machines from maxion, type BS 36 GL. Year of Make: 2022 Condition: good Hours: Asking price: 5,000 € each Original price: 11.900 € each Equipment / accessories / other information: Tapping capacity: M5-M30 Spindle speeds: 160-260-380-580-880 rpm Spindle MK 4 Thread depth 90mm Drilling depth 160mm Radius 300m Table 550x440mm Overall height 2105mm Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 68753 Waghäusel The sale is without warranty Subject to prior sale

From a current recycling we offer you a used column drilling machine / thread cutting machine from Maxion, type BS 50 GL. Year of Make: 2022 Condition: good Hours: Asking price: 9.900 € Original price: € 18,900 Equipment / accessories / other information: Tapping capacity: M5-M45 Spindle speeds infinitely variable 35-530 rpm Spindle MK 4 Thread depth 150mm Drilling depth 200mm Radius 325m Table 650x5000mm Overall height 2150mm Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 68753 Waghäusel The sale is without warranty Subject to prior sale

Sumbel Machine Package; cleaned and tested; consisting of Sumbel Herold 800 banding machine and Sumbel Regent 800 grating machine. Machine package Sumbel; cleand and checked; gluing machine Sumbel Herold 800 and pressing down machine Sumbel Regent 800.

Planing width mm 260 Dressing table length mm 1040 Max. saw blade diameter mm 250 Saw blade spindle mm 30 Max. saw blade protrusion from the table at 90 mm 75 Max. saw blade protrusion from the table at 45 mm 60 Cutting width at the rip fence (longitudinal cut) mm 500 Milling machine Max. usable spindle length mm 75 Milling machine Max. tool diameter for profiling mm 160 Milling spindle speed rpm 4000/6500 3 motors in V.230 1 PH  

Used Labeling Machine plus capsuling machine GAI 6206CH 001 1200 bph General machine features This Machine integrates efficiently into low and medium capacity bottling lines. GAI manufactured this unit in the year 2012 and configured it to operate at a nominal speed of 1200 bottles per hour. Therefore, this output makes the machine suitable for operations that require flexibility, reliability, and compatibility with various container formats. In addition, its design supports a wide range of production environments. Capsuling unit configuration The capsuling unit rotates in a clockwise direction and uses rotary motion to handle capsule application. Specifically, the machine includes two independent heads. One head applies heat shrink or poly capsules for still wine. The other head applies tin or polylaminate capsules for sparkling wine. As a result, this dual head configuration allows ope ...

TECHNICAL DATA: Processing dimensions: max. 1000 x 300 x 70 mm Horizontal Spindles: 5 + 1 Horizontal drill speed: 4500/9000 rpm Horizontal drill bit holder: Ø 16 mm Saw: Ø 130 mm Installed power: 10 kW

TECHNICAL DATA: 02 Drilling spindles (1 HP each) 01 6-spindle mortising unit (2 HP) 02 Workpiece holding piston

Thimonier THB9200 Vertical Form Fill & Seal Filling Machine (2021) 50-500ml berlingot (pillow-style triangular pouch) Liquids & viscous products (including corrosive detergents) Auction-ID: A1-48805-2

Serta Blow Molding Machine With Moretto hopper loader Auction-ID: A1-48805-74

Consisting of Planaxator, 220 volts 95 Watt eyelet machine manual Rapid Punch Auction-ID: A1-48786-70

- Belshaw automatic donut machine - Manufacturer: Belshaw Bros., Inc., USA - Type: MK V-CE - Automatic Donut Frying Machine - Voltage: 380 V - Phase: 3 - Power: approx. 7.9 kW - Frequency: 50 Hz - Used - Condition see pictures

General Description Universal vertical tool milling machine manufactured by the Kirov Machine Tool Plant, Odessa (USSR) . Designed for precision milling, drilling, slotting and general toolroom machining. The machine is equipped with a geared vertical spindle, T-slot work table and heavy-duty machine vise. Technical Details Manufacturer: Kirov Machine Tool Plant, Odessa (USSR) Machine type: Universal vertical tool milling machine Year: Not confirmed Spindle speeds: 145 / 290 / 580 / 725 / 1,450 / 2,900 rpm Vertical spindle head T-slot machine table Heavy-duty machine vise included Longitudinal power feed Separate electrical cabinet Machine work light Condition Fair to good used condition. The machine appears mechanically complete with spindle gearbox, T-slot table, heavy-duty vise and electrical cabinet installed. Cosmetic paint wear, industrial staining and light surf ...

General Description Handheld fibre laser welding system manufactured by Bodor / Jinan Bodor CNC Machine Co., Ltd. , model BodorWelder 1500 Pro . Compact 1.5 kW laser welding system designed for manual precision welding of sheet metal and fabricated components. Supplied with a Bodor BF600 automatic wire feeder. Technical Details Manufacturer: Jinan Bodor CNC Machine Co., Ltd. Model: BodorWelder 1500 Pro Machine type: Handheld fibre laser welding machine Laser output: 1,500 W Integrated self-cooling system Handheld Bodor laser welding gun Touchscreen operator control Automatic wire feeder: Bodor BF600 Wire feed speed: 15–600 cm/min Wire feeder supply: 100–240 VAC, 50/60 Hz Wire feeder power: Max. 85 W Standard feeding-wheel sizes: Ø0.8/1.0 mm and Ø1.2/1.6 mm Maximum wire spool weight: 20 kg Suitable for stainless steel, carbon steel and aluminium Gas connection Et ...

HASBERG FSS tool grinder, robust machine for sharpening and maintenance of cutting tools in the mechanical workshop. This type of machine extends the life of tools (drills, milling cutters, turning tools) thanks to precise and reproducible sharpening. The solid design typical of 1970s machines offers high stability, which is appreciated for precise sharpening work. Ideal machine for: CNC and conventional machine shops mechanics and machinists Industrial maintenance Production workshops Lovers of old machine tools Auction-ID: A1-48554-16

Auction-ID: A1-49365-53

Small conventional shaping/slotting machine with T-slotted table and manual controls. Compact workshop machine for light shaping and slotting work. Auction-ID: A1-49190-22

COMARME pallet wrapping machine with turntable, intended for the packaging and stabilization of palletized loads by means of stretch film. Equipped with a motorised turntable, a vertical column with reel trolley, a film pre-stretching system by rollers and an electronic COMARME Ronda System control. The control panel allows the adjustment of the banding cycles, the raising and lowering of the trolley as well as various operating parameters. Several programs are available. Machine also equipped with a main switch and an emergency stop button. Suitable film width: approx. 500 mm. Diameter of the tabletop: approx. 1,650 mm. Maximum banding height: approx. 2,200 mm. Estimated total dimensions: 2,600 × 1,650 × 2,700 mm. Estimated weight: approx. 500 kg. CE marking. Auction-ID: A3-46147-37174

Thimonier THB9200 Vertical Form Fill & Seal Filling Machine (2021) 50-500ml berlingot (pillow-style triangular pouch) Liquids & viscous products (including corrosive detergents) Auction-ID: A1-48805-1

This is a Pedrazzoli metal band saw machine (band saw), a semi-automatic crosscut saw for metal on a steel base/table with coolant collection. Machine Brand: Pedrazzoli Type: band saw machine / band saw machine for metal (radial arm saw) Version: on its own base with collection tray, electric operation with emergency stop and on/off buttons on the control panel Saw blade (nameplate 1) Saw blade size: SV. 2450 x 27 x 0.9 mm Material: Bimetal Cobalt M42 Tooth pitch (Z): varying according to material thickness, from 8/12 (thin material) to 3/4 (thick cross-sections >100 mm) Lubrication advice drive: oil ISO 460, e.g. Agip Blasia 460 Lubrication advice hydraulics: oil ISO/L/HV type SA-A, e.g. Agip H Lift 46 Cutting speed and tension tables present on the plate (for adjustment per material) Drive motor (nameplate 2 — Siemens) Brand: Siemens Made in: Czech Republic Thermal  ...

Throughput width: 400 mm, Equipped with molds, 167193 pieces produced. Auction-ID: A1-47359-1