129,484 used machines on RESALE, but how to find them? Machine Search
BIG SUN Swivel discharge bucket 240 cm with case mounting, - Net weight: approx. 351 kg, - Volume: 1.01 m3
SML Heavy-duty tipping bucket 240cm with Manitou mounting, - Self-weight: approx. 443 kg, - Volume: 1.56 m3
weight max. in kg: 1000 kg table length: 1500 mm table width: 1000 mm height over floor: 200 mm stroke height: 200 - 1200 mm stroke: Zeit ca. 15 sek total power requirement: 2.3 kW weight: 330 kg current new price approx. 5.000 euros special price on request Equipment: - Robust electro-hydraulic scissor lift table - for ergonomic working at an optimum working height - with closed platform - stepless lifting and lowering - All-round safety rails - Placement: free-standing on the floor or as a pit installation - remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
without hydraukikaggreget without electrics The device is therefore sold as defective Auction-ID: A1-45977-18
without hydraukikaggreget without electrics The device is therefore sold as defective Auction-ID: A1-45977-19
Operating pressure 110 bar IP 55 Auction-ID: A1-45977-17
An electric plate vacuum lifting frame Framatech with tilting function is available, load capacity: 2000kg, suction frame dimensions X/Y: approx. 1200mm/2400mm, suction pads: 16, suction pad diameter: 290mm, dead weight: approx. 400kg, documentation available, an on site inspection is possible.
HANSE LIFTER BFAR-02 pallet truck, load capacity 2,500 kg, built in 2011, S/N 1103-854445-127, dead weight 76 kg, lowers only under load, internal No. 21
Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-22
Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-21
Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-19
Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-18
Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-20
Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.
Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.
Platforms, maximum height 11.50 m, Maxim two people 215 kilos and 55 g kilos has material Auction-ID: A1-45975-27
Compact Wheel Loader / Telehandler General data: Identification number: JAFSR210CKM475069 Type approval number: LLPB080H Year of manufacture: 2019 Operating hours: 900 h Condition: Very good, occasionally used, regularly maintained Operating weight: approx. 3000 kg Permissible total weight: 4100 kg Unladen weight: 3025 kg Technical details: Engine: CASE, 4-cylinder Engine power: 55 kW (74 HP) Transmission: Hydrostatic Drive: Four-wheel drive Lifting capacity: 950 kg Travel speeds: 2-speed Equipment: ROPS/FOPS cabin with protection Front and rear work lights Mechanical joystick controls Auto leveling system Seat with cushion Gel tires Large front bucket included Description: Compact wheel loader (or telehandler type) designed for material handling and loading operations in construction, agriculture, and industrial environments. The machine offers good li ...
2 UNITS/SETS OF LON0015/I PACKED TOGETHER. A SINGLE LON0015/I CORRESPONDS TO: The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16 ...
1x (5000x1300x800 mm) and 1x (5200x1400x570). Glass beads not included Auction-ID: A1-43429-63
Consisting of: several threaded lifting eyes (swivel eyes), supplemented with a plate clamp and two beam clamps. On 1 pallet. Auction-ID: A1-45979-65
Manufacturer: Mercedes-Benz Type: Arocs 2532 L 6x2/4 Vehicle Type: Garbage Truck / Municipal Vehicle Construction: Faun Rotopress 520 Bio Lift: Zoeller Delta Premium Year of construction chassis: 2015 Year of construction: 06/2015 Registration date: 14.07.2015 Power: 235 kW (320 hp) Displacement: 6,798 cm³ Emission class: Euro 6 Transmission: Automatic (PowerShift) Axle configuration: 6x2 with trailing steering axle Mileage: approx. 109,627 km Permissible total weight: 26,000 kg Curb weight: 14,500 kg Payload: approx. 11,500 kg Tyre size: 315/80 R 22.5 Tyres: winter tyres, good condition Cab: Local transport, 3 seats Equipment: air conditioning, cruise control, electric windows and mirrors, air-suspended driver's seat, heated seats Safety: ABS, EBS, ESP, differential lock Additional: reversing camera, turning camera right, rotating beacons, wo ...
The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-200 r/min. TAP RANGE: DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30 Machine condition: unchecke ...
2 UNITS/SETS OF LON0013/D PACKED TOGETHER. A SINGLE LON0013/D CORRESPONDS TO: The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-200 r/min. TAP RANGE: DIN371: M6,M8, M10 ...
Serial number: 00219 Max. load capacity: 350 kg Storage area: approx. 900 (1050) x 510 mm Auction-ID: A7-46287-184
Very neat and fully cleaned + polished electric forklift, immediately usable for professional use. Technical specifications Brand/Type: Still RX20-16 Year of construction: 2019 Operating hours: 21,330 hours Lifting capacity: 1600 kg Lifting height: 6050 mm Headroom: 2600 mm Free lift: 2060 mm Mast: Plywood Fork length: 1200 mm Fork width: 330 – 1000 mm (adjustable) Add-on parts: Fork spreader + Side-shift Wheels: 3-wheel version ⚡ Drive & battery Drive: Electric Battery: 48V – 625Ah Battery year: 2019 Charger included ️ Options & equipment Full cab Heating Joystick control Work lights Non-marking tires (suitable for indoor use) Free levy Documentation Documentation available CE marking available Serial Number: 516221V01609 Transport & dimensions Dimensions: 2000 x 1200 x 2600 mm Weight: 3432 kg Number of packages: 1 Terms and conditions Collection possible Free loading on tr ...
Chain diameter: 16 mm, Equipped with: shortening hooks. Auction-ID: A1-45979-64
Equipped with: (1x) chain conveyor, Size: 2800x3950x600mm, (1x) chain conveyor, Size: 1900x3950x600mm, (1x) Hymo lift table, capacity: 3000kg, Size: 3000x1100mm. Auction-ID: A1-43429-45
The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-156 r/min. TAP RANGE:DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30,M33,M36 Machine condition: u ...
Engine problem (reason unknown) - see video - air conditioning - overall neat condition, few signs of wear, solid chassis Auction-ID: A3-43369-10657
The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18-20,M22,M24,M27-30,M33,M36,M42,M48 Machine condition: unchecked. Approx. ...
2 UNITS/SETS OF LON0015/I PACKED TOGETHER. A SINGLE LON0015/I CORRESPONDS TO: The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16 ...
Nussbaum Hebetechnik 2-post lift, model AT2L, ideal for mechanical workshop or garage. Rugged German-made equipment, known for its reliability and robustness. This bridge can lift vehicles up to 2.5 tons, perfect for routine maintenance (oil changes, brakes, tires, etc.). Auction-ID: A3-43519-38056
The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-156 r/min. TAP RANGE:DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30,M33,M36 Machine condition: u ...
Strong and representative Mercedes Antos rigid built in 2016, ideal for transport, distribution or professional use. Equipped with automatic gearbox, working air conditioning and hydraulic tailgate. Familiar Mercedes solidity and comfortable handling. Starts without a booster, shifts and brakes well. Strong points: Mercedes Antos, Year of Build 2016, Euro 6, Automatic transmission, Working air conditioning, Large cargo box, Hydraulic tail lift available, Professional appearance, Belgian documents available, Inspection valid until 31/03/2026, Keys available - Technical data: Fuel: diesel, Power: 175 kW, GVW: 19.000 kg, Tare weight: 9.050 kg - Remarks / points of interest: Damage to the right rear, which damaged the operation of the tailgate. Tailgate is currently not working and needs to be checked/repaired. Engine malfunction light is on. Front right bodywork damage - signs of wear accor ...
This Snorkel S3219E from November 2019 is in excellent condition and can be used immediately for your next project. With a narrow clearance of just 0.81 m, this machine fits effortlessly through standard doorways and into tight aisles. Main specifications: Year of construction: 11/2019, Working height: approx. 7.80 meters (Platform height 5.80 m), Lifting capacity: 250 kg (suitable for 2 people indoors / 1 outdoors), Compact design: Only 0.81 m wide – ideal for warehouses, installation work and finishing. Extendable deck: Extra working space of almost 1 meter (total platform 2.53 m) - Condition: Technically well maintained, equipped with non-marking tires (leaves no marks on floors) - The S3219E is known for its robustness and easy operation. With a dead weight of 1611 kg, it is stable, yet easy to transport on a trailer. The machine is fully electric, which means: emission-free and wh ...
APAC 4-post automotive lift, model 1542R, from 2005. Equipped with two access ramps and an integrated auxiliary jack with a capacity of 2600 kg, it allows the safe lifting of vehicles for maintenance and repair operations. The whole is controlled by an electrical box with buttons for up, down and emergency stop. Robust and designed for use in the workshop, this lift is suitable for general mechanics and automotive maintenance work. Auction-ID: A3-43519-38059
Various types and sizes, Material trolley size: 1150x800x1770mm. Auction-ID: A1-45979-67
2 UNITS/SETS OF LON0013/D PACKED TOGETHER. A SINGLE LON0013/D CORRESPONDS TO: The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-200 r/min. TAP RANGE: DIN371: M6,M8, M10 ...
OMCN 4-column car lift, model ART. 400, ideal for garages or mechanical workshops. Lifting capacity of 3500 kg, allowing cars and light commercial vehicles to be easily lifted. Robust and reliable machine, made in Italy, with three-phase power supply 220/380 V. Equipped with a motor of about 2.2 kW ensuring a smooth climb. Access ramps included. Year 1992, in good general working order. Solid structure, perfect for maintenance, repair or storage of vehicles. Auction-ID: A3-43519-38060
already equipped with tachograph! - Working reversing camera! - automatic air conditioning - starts with booster (battery probably needs to be replaced, stood still for too long), drives and brakes properly - tow bar - 3 people - working d'Hollandia tailgate - engine light is on, probably due to bad battery Auction-ID: A3-43369-10869
The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18-20,M22,M24,M27-30,M33,M36,M42,M48 Machine condition: unchecked. Approx. ...
The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-200 r/min. TAP RANGE: DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30 Machine condition: unchecke ...
1x Cotron (5000x1250x550) and 1x Weidner (4950x1350x500) Auction-ID: A1-43429-44
Offer 26089 Technical data : - Manual rotation by 180° ( 90° left + right ) - Manual tilting by 90° - Load capacity with 4 suction cups at 80% operating vacuum 0.32 t - Suction cup diameter 280 mm each - Dimensions 715 x 833 mm - Distance or height lower edge of suction cup – crane hoe 950 mm - Vertical installation depth 230 mm - Operation with mains-independent 12 V battery - Battery charger 220 V - Space requirement approx. W 300 x H 300 x D 1600 mm - Net weight approx. 60 kg - Transport crate W 1800 x H 450 x D 400 mm
Equipped with a recent inspection (valid until April 2027); Reach with 80kg: 4m; Charging batteries at 220V; 359-degree rotation; working well. Auction-ID: A1-40136-201
Lift can be up to approximately 2000 mm in height, Auction-ID: A1-40136-273
Equipped with: steel rubs, working height of approx. 16 m, a maximum working load of 250 kg (2 persons + 90 kg), own weight of 8290 kg, 24 V power supply, maximum hydraulic working pressure of 210 bar, permissible wind speed of 12.5 m/s and maximum undercarriage inclination of 3°. Auction-ID: A1-40136-79
Equipped with a recent inspection (valid until 2027); manual pushing; Good working Auction-ID: A1-40106-115
Construction hoist / passenger lift 7 persons lifting capacity 2000 Kg equipped with BS platform tow rope 50 meters including roof good working condition and complete Auction-ID: A1-40136-65
maximum number of results exceeded
please refine your search
500 € 
