hook lift 30 used for sale

Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-290

Measuring range: 0 - 300 mm Measuring resolution: 0.01 mm Digital height gauge with zeroing system for comparative measurements (relative zero and negative positions) Machine condition: unchecked. Approx. Transport dimension: LxWxH 520 x 260 x 110 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-261

3 UNITS/SETS OF ATT0009 PACKED TOGETHER. A SINGLE ATT0009 CORRESPONDS TO: Pressure 3000 Kg (100x100 mm), Material: cast iron, Jaw width: 100 mm, Jaw height: 30 mm, Maximum opening: 100 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 330 x 150 x 160 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0009 PACKED TOGETHER: 330 x 450 x h160 mm - 45 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-2

The vacuum cleaner is in good condition. Functional. • Motor power: 2200 W (3 HP) • Power supply: 230 V – 50 Hz • Rotational speed: 2950 rpm • Propeller diameter: 300 mm • Number of connections: 3 x 100 mm • Air flow: 2864 m³/h • Capacity: 2 x 150 liters Auction-ID: A3-43519-34056

Magnetic force 300 Kg - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 220 x 250 x 130 mm; Approx. Weight: 9kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-266

Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 550 x 350 x 110 mm; Approx. Weight: 70kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-344

2 UNITS/SETS OF LON0020 PACKED TOGETHER. A SINGLE LON0020 CORRESPONDS TO: Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x LON0020 PACKED TOGETHER: 650 x 1260 x h1130 mm - 206 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-22

Set composed of 12 centesimal micrometers for measurements from 0 to 300 mm. Measurements: 0-25mm; 25-50mm; 50-75mm; 75-100mm; 100-125mm; 125-150mm; 150-175mm; 175-200mm; 200-225mm; 225-250mm; 250-275mm; 275-300mm. Certificate included Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 380 x 340 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-212

2 UNITS/SETS OF LON0016 PACKED TOGETHER. A SINGLE LON0016 CORRESPONDS TO: Benchtop machinery for sharpening multiple types of tools (turning tools, knives, boring tools, etc.). Work surface with single guide, 360° rotating motor, double-direction rotation wheel. Maximum workable diameter: 300 mm Stroke: 150 mm Working area approx.: 130 x 550 mm Grinding wheel size: Ø 125 x 50 x Ø 32 mm Speed: 2800 rpm Engine: 3/4 hp - 220/380 V Item size: 700 x 630 x 630 mm Item weight: 160-170kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 660 x 660 x 760 mm; Approx. Weight: 170kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x LON0016 PACKED TOGETHER: 660 x 1320 x h760 mm - 340 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: ...

10 UNITS/SETS OF LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-14

New generation of compact laser markers, with motorized opening and protection sensor for safe operation. 30W power source (adjustable), marking field 110 x 110 mm. Motorized and manually operated Z axis, simple and effective focusing thanks to the double pointer. Air cooling, 220V power supply at 50 Hz. Minimum reproducible thickness 0.02 mm, speed up to 7000 mm/s. EZCAD2 software included. Item size 730 x 500 x 850 mm. Item weight 75 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 750 x 540 x 870 mm; Approx. Weight: 70kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-69

Benchtop machinery for sharpening multiple types of tools (turning tools, knives, boring tools, etc.). Work surface with single guide, 360° rotating motor, double-direction rotation wheel. Maximum workable diameter: 300 mm Stroke: 150 mm Working area approx.: 130 x 550 mm Grinding wheel size: Ø 125 x 50 x Ø 32 mm Speed: 2800 rpm Engine: 3/4 hp - 220/380 V Item size: 700 x 630 x 630 mm Item weight: 160-170kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 660 x 660 x 760 mm; Approx. Weight: 170kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-322

consisting of 1x cooling water pump unit, cooling capacity 260 Kw, equipped with 3x 2000 ltr cooling water tanks, Bitzer cooling compressor, 4x circulation pump, control box, floor area 4400x2500 mm, height approximately 4100 mm, 1x Güntner condenser on the roof, equipped with 8x fan, condenser size (LxWxH) 7500x2400x2700 mm, Please note! pick up by appointment, piping not included, refrigerant has already been drained, Auction-ID: A1-43992-26

To be controlled via Wifi, Heating capacity (kW) 2.2, Power connection (kW) 0.53, COP value 4.15, Energy label A+, Maximum current connection (W) 3000, Nominal current (A) 2.9, Maximum current (A) 15, Power supply 220V ~ 50 Hz, Backup electric heating (W) 2000, Refrigerant R134a/1050g, Compressor Rotary/Panasonic, Net dimension (mm) Φ 620×2038, Package dimension (mm) 700 x 700 x 2090, Net weight (Kg) 130, Gross weight (Kg) 140, Noise (dB) 48, Water tank capacity (L) 300, Working temperature range (°C) -7 ~ 43 Auction-ID: A1-40106-103

New and unused Auction-ID: A7-46327-113

Extra options : Clamp and Rotator , work lighting , operation unknown Viewing by appointment Auction-ID: A1-43890-50

3000 ANSI lumens, 1,920x1,080 Full HD, DLP; Video signal input: HDMI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: Black; Dimensions of the transport box: 54x31x20 cm (L/W/H), total weight: 11 kg Auction-ID: A7-46311-33

Unchecked from practice Closure Auction-ID: A7-46327-64

0-200 mm Auction-ID: A1-43992-174

Power: 80 kW (~109 hp); 1.6 gasoline; 1,587 cm³ Operating parameters: Manual gearbox; mileage 146,000 km; VIN VF33BNFUC83742922 Workpiece capacity: 2 doors; cabriolet (CC, retractable hardtop); 4 seats Supported edges: N/A Edge types: N/A Included equipment: Standard road equipment (details N/C) Compliance: EU road approval Power supply: Gasoline Year/Manufacturer: 2004 / Peugeot – 307 CC Remarks: Used condition; petrol engine with manual transmission; convertible body version Compact 2-door convertible with 1.6 petrol engine and retractable hardtop. Auction-ID: A7-46319-22

76 pieces Oak Composite Slats / Composite Room Divider 300 cm long, 10 cm wide, 5 cm thick. Includes black aluminum cover caps for bottom and top and aluminum reinforcement bar. Unused on pallet. Auction-ID: A1-40136-366

Nikon CoolPix L820 - 16,1MP -30x Opt.Zoom - Full HD Video Auction-ID: A7-46327-261

Approx. 300 Mickey Mouse comic booklets, special issue, poster Auction-ID: A7-46327-73

76 pieces Black Composite Slats / Composite Room Divider 300 cm long, 10 cm wide, 5 cm thick. Includes black aluminum cover caps for bottom and top and aluminum reinforcement bar. Unused on pallet. Auction-ID: A1-40136-368

Stamp size 4x 120x150cm. Press height 88cm. Includes scissor lift table movable with rails dimensions lxw approximately 141x103.5cm extendable to 300cm, height adjustable rear output roller conveyor dimensions lxw approximately 480x180cm, 2 parts 2-way pneumatic roller conveyor dimensions total lxbxh 500x103x92cm. The required surface area is approximately 600x570cm. Includes air and power reel. Auction-ID: A1-41994-5

76 pieces Teak Composite Blinds / Composite Room Divider 300 cm long, 10 cm wide, 5 cm thick. Includes black aluminum cover caps for bottom and top and aluminum reinforcement bar. Unused on pallet. Auction-ID: A1-40136-367

Unaohm EP 305A Field Strength Meter TV Panoramic Field Strength Meter RF Signals Auction-ID: A7-46327-128

New Victron Energy 3-Phase Storage System – 3× 4K5 MultiPlus-II with 30 kWh LFP Battery Offered is an installed and programmed professional 3-phase energy storage system from Victron Energy, consisting of 3× 4K5 MultiPlus-II inverter/chargers in combination with a 30 kWh lithium iron phosphate (LFP) battery. This system is ideal for homes and businesses with a 3-phase connection, and for applications such as solar energy storage, peak load, emergency power supply and hybrid or off-grid installations. The large battery capacity ensures long autonomy and high operational reliability. ✅ Benefits • Full-fledged 3-phase Victron system (3× 4K5) • 30 kWh LFP battery: safe, low-maintenance and long service life • Ideal for higher power and continuous operation • Suitable for on-grid, hybrid and off-grid applications • Smart energy management and monitoring possible via Victron ...

Socapel - ST180-310 - Batch of industrial electronic modules 30x Condition: Used Auction-ID: A1-46070-243

Batch of hand files/graters Auction-ID: A1-46070-85

SMC - Batch Pneumatic Couplings Condition: unused Auction-ID: A1-46070-242

EWM PICO 300 CEL PWS TIG welding machine; TIG version; without torch and ground cable Auction-ID: A1-45170-46

HABERLE HR 302 deburring machine ; suitable for pipes, pipes and conduits; equipped on a mobile chassis; Voltage: 380 volts ; Power: 0.88 / 1.32 kW ; Spindle speeds: 100 / 200 rpm ; Auction-ID: A1-45170-23

Information: - Special package free shipping - within Germany (without islands) - Complete set fence package 750 m - Height 2,030 mm - Thickness 6/5/6 mm - Galvanized + RAL 7016 - Anthracite grey coated - 300 double rod mats W: 2,510 x H: 2,030 mm 6/5/6 mm MW 50 x 200 mm RAL 7016 - 301 pieces of fence posts 60 x 40 x 2 x 2,200 mm with ground recess approx. 600 mm for concreting - 301 pieces hook cap (1 piece per lot) - 903 pieces of U-bracket sets (3 pieces per post) Seller's Note: - It is new! - Forklift available on site for easy and fast charging. - Suitable gate system (1.25 and 3.00 m passage width) possible on request for an extra charge - Suitable privacy screen available on request for an extra charge - Special quantities from 75 m upwards possible on request for an extra charge - Material available on request in hot-dip galvanized and RAL6005 - Material hei ...

\" New, unused magnetic measuring stand from KS TOOLS for recording dial gauges / dial gauge holders. Version with 3 precise joints for flexible positioning and stable fixation during measurement and testing work. The item is in its original packaging, only the outer packaging shows traces of storage. The measuring stand itself is new and unused. • Manufacturer: KS TOOLS • Designation: Magnetic measuring stand • Version: 3 joints • Article number: 300.0623 • Condition: new • Packaging: Original packaging (with slight signs of use) • Application: Dial gauge, fine measurements, testing and adjustment work \" Auction-ID: A7-46417-257

\" Rathenow measuring microscope 30x – in a wooden box measuring microscope / thread counter of the brand Rathenow with 30x magnification and lateral micrometer screw for fine adjustment. Device in wooden case with accessories as shown. • Manufacturer: Rathenow • Magnification: 30x • Version: Measuring microscope with integrated micrometer screw • Fine adjustment via scale drum • Eyepiece with diopter/focus adjustment • Supplied in a wooden box \" Auction-ID: A7-46417-315

PDC + Compress Hybrid 3000i AWS / HC3000iAW 6SI Kit - - 80x120x H110 cm Auction-ID: A7-46421-12

\" Lot of approx. 300 kg of turning steels – mixed lot for lathes An extensive lot of turning steels for machine tools is for sale. Inventory according to visual inspection: • External turning steels • Internal turning steels / boring rods • Parting steels • Shaped steels • Partly equipped with carbide • Partly with indexable insert holders Different dimensions and designs. Sale exclusively as a total item. Total weight: approx. 300 kg Material: tool steel / partly carbide tipped Design: various shaft sizes and lengths \" Auction-ID: A7-46417-369

76dB low sound; accessories; 5.3kg; Auction-ID: A1-45902-1033

Floats can be used for various water projects; Jetties pipeline & solar panels Auction-ID: A1-41682-222

Standard : DIN EN ISO 3650 Tolerance class: Class 1 ID: 5392 Condition • Used • Measuring surfaces visually good, with slight, normal traces of use • Wooden case with signs of wear and tear • Nominal dimension: 300 mm • Design: long-end dimension with through-holes • Material: steel • Tolerance class: 1 (precision measuring equipment)\" Auction-ID: A7-46417-206

PDC + Compress Hybrid 3000i AWS / HC3000iAW 6SI Kit - Bosch Unit (very slight dent, see photo) - 90 x 120 x H110 cm Auction-ID: A7-46421-13

Unused; in the original packaging; with mounting bracket; 30m+2m cable; Hose diameter 1/2 11mmx15mm Auction-ID: A1-45902-345

\" Digital tip caliper (internal measuring device), manufacturer HELIOS, version HELIOS-digit, in a wooden box incl. documents. – Digital tip caliper for internal measurements – Fine measuring tips – Digital display (mm / inch) – Zero setting possible – Robust industrial design – Storage in wooden box – Original operating instructions available Manufacturer: HELIOS Design: HELIOS-digit Tip caliper Design: Digital – Measuring range: up to approx. 300 mm – Resolution: 0.01 mm – Repeatability: approx. 0.03 mm – Display: Digital \" Auction-ID: A7-46417-147

\" Measuring stand with granite measuring plate DIN 876/00 with column with clamping block • Granite measuring plate • Weight: approx. 19 kg • Degree of accuracy: DIN 876/00 (very high) Deviation: 0.003 mm • Actual deviation: 0.0018 mm • Made in Germany • Fixed column with height adjustment Dimensions of granite measuring plate: 300 x 300 x 70 mm \" Auction-ID: A7-46417-261

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-45902-684

Floats can be used for various water projects; Jetties pipeline & solar panels Auction-ID: A1-41682-221

Digital Internal Gauge for Large Diameters – 300–500 mm – Messwerk XT – Bowers / messwelk Digital bore gauge for large diameters in an original wooden box. The system is designed for precise internal measurements in the range of 300 to 500 mm and is based on the Bowers XT (Xtreme) measuring mechanism with digital display.     •    Digital indoor measuring device with XT measuring mechanism (IP65)     •    Measuring body / measuring bridge     •    Extensive set of interchangeable measuring heads / probes     •    Adjustment ring XT 300 mm (separate wooden box)     •    Original wooden boxes Condition:     •    Used, overall neat co ...

\" Caliper posts – 7 pieces – measuring range 0–300 mm Lots of 7 mechanical calipers, each with a measuring range of 150, 200 and 300 mm. The calipers come from workshop/industrial stock and are mainly supplied in wooden or cardboard cases. • Measuring ranges: 150, 200, 300 mm • Reading: 0.05 mm / 0.1 mm (depending on the version, see pictures) • Type: mechanical / analogue (vernier) • Material: steel, stainless steel • Design: metric • Quantity: 7 pieces \" Auction-ID: A7-46417-224

\" Mechanical floor scale / platform scale from the manufacturer RAPIDO / NAGEMA (VEB Wägetechnik Rapido Radebeul, GDR). The scales are embedded in the floor. – Mechanical platform scale – Large circular display with pointer – Tare compensation – Zero regulation – For industrial applications – Recessed flush with the floor (stationary version) – Manufacturer: RAPIDO / NAGEMA – Max. load capacity: 300 kg – Minimum load: 10 kg – Pitch: d = e = 0.2 kg – Net weight scale: approx. 280 kg – Year of construction: 1981 – Accuracy class: III\" Auction-ID: A7-46417-144