hook lift 30 used for sale

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.5 kW -Speed: 1430 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Dimensions: 700/550/H1200 mm -Weight: 170 kg

- Including YUDO SIGMA 800cs robot - Clamping force: 3.000 kN

3000kN BIPEL press with electrical equipment to suit 415 Volt, 3 Phase, 50 HZ, A.C. Supply. Generally in accordance with the following specification and comply with current supply of safety regulations Model 3000kN BIPEL Press Application Compression Moulding Mode of Operation Manual and Semi-Auto Frame structure Steel plate frame Frame number Cylinder type Double acting Pressing force kN 3000 Pull back force at circuit pressure kN 120 Operating height mm Approx. 930 Stroke mm 610 Daylight between Tables mm 1206 Heated Platens mm 841 Table size L -R mm 774 F-B mm 889 No. Of Heated platens 2 Heated platen size  ...

Dematic conveyor system Accumulating roller conveyors Roller conveyor 3000-600-540, 750 RA2290 Manufacturer: Dematic Type: Drive unit accumulating roller conveyor Year of construction: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Head and center drive Weight of conveyed goods: up to 30 kg Technical data: SEW geared motor 380V RA2290.1 Manufacturer: Dematic Type: Accumulation roller conveyor extension module Year of manufacture: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Overdrive from RA2290 (necessary) Weight of conveyed goods: up to 30 kg Optionally available e.g: SEW Eurodrive / Movimot frequency inverter Supports Sid ...

Unused, stock item, Model Standard, A4- A6, IP 65, max. load capacity 30 kg, weight 99 kg, warranty

SINK-FLOAT SEPARATION TANK for PLASTIC SCRAPS, Constructed in thick AISI 304 STAINLESS STEEL with reinforced plates and profiles, Dimensions 5,0 X 1,5 mt., Inlet hopper for shredded plastics, Flanged water in/out ports, taps and ball valves, 1,5 kw.driven rollers for material movement with Bonfiglioli gearboxes, n.1 chain conveyor on bottom to extract the sunk materials, n.1 diagonal stainless steel chain conveyor, collection drained auger for extraction of floating material, size: 5,0 x 1,5 mt., capacity: 800-1.500 kg/h depending on materials

Sturdy supporting structure in painted carbon steel, loading hopper, Shearing size 1.300x900 mm, 2 x 22 kw drives, constructed in 2024, Rotor Length 1.300mm, N.25 knives, knives thickness 50 mm, 2 hooks, Weight about 4.500kg, Shaft speed 15/17 rpm, electric cabinet, complete with CE, users manual, electric drawings, installed power - used power in work: about 60-65% : 44

BD PLAST NON-STOP SCREENCHANGER, Machine reconditioned Screen Ø 300 mm, suitable for 160 - 180 mm extruders, Heating capacity approx. 25 kW N. 4 heating areas Hydraulic pack., Machine offered totally econditioned, complete with Users manual, CE compliance, el.drawings, installed power - used power in work: about 60-65% : 25

2025 BIG backhoe bucket 30cm with MS03 Symblock attachment, Technical specifications:, - Weight: 104 kg, - Recording width: 30 cm, - Contents: 90 liters, - CAT 4 - suitable for 4 - 5.5 t excavators

2025 BIG backhoe bucket 30cm with MAR03 attachment, Technical specifications:, - Weight: 61kg, - Recording width: 30 cm, - Contents: 57 liters, - CAT 3 - suitable for 2.8 - 3.9 t excavators

Batch mixer with a gross volume of 300 l. (max. usable filling: approx. 200 l.), part in contact with the product in stainless steel V4A, centrifuge equipped with ploughshares, drive via geared motor with 7.3 kW (pole-switchable for 2 speeds), equipped with a cutter head with 4.0 kW (speed approx. 3,000 rpm). Incl. push-button control cabinet and base; Outlet flap manually operated. All tools in very good wear condition.

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300VA -Primary: 3x380V -Technical data: see photo identification plate -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: Leitz, saw blade for non-ferrous metal or plastic, unused in original packaging -Type: 165828 300x3.2/2.6x32 Z72/13.09 -Inside: Ø 32 mm -Number of teeth: 72 teeth -Speed speed: n max. 7600 rpm -Quantity: 1x saw blade available -Dimensions of box: 380/380/H15 mm -Weight: 1.6kg/piece

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Jäckle, water-cooled TIG welding machine -Type: TIG 301i DC -Welding power: max. 300 A, see nameplate -Cooling device: KG 2 -Accessories: including ground cable, hose package -Dimension: 730/620/H1180 mm -Weight: 73kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier -Manufacturer: Sonnenschein charger dryfit TL 24V 260-300 Ah -Input voltage: 220 V -Power: 24 V / Battery capacity 260-300 Ah -Quantity: 1x charger included -Dimensions: 600/410/H450 mm -Weight: 40 kg

ALL PURPOSE, SINGLE SHAFT SHREDDER 1.300 mm.55 kW, for plastics, cardboard, pipes, paper, cables, wok and more, This is a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Rotor width 1.300 mm. Rotor diameter 450 mm, Shredding chamber 1.300 x 650 mm. Motor power 55 kW (or bespoke to project), Electrical control system Siemens S7 PLC control, horizontal hydraulic ram with hydraulic pack, control cabinet with PLC Siemens S7, Sturdy supporting structure in solid carcon steel, Loading hopper constructed in sturdy carbon steel, bespoke to project, 12 month warranty, Available [loading](.germanplast.eu/listings/4462316-conveyor-with-metal-detecto r) and [extraction](.germanplast.eu/listings/4115563-used-extraction-belt-450 -x-3-5 ...

Double spiral mixer DIOSNA, type: DSP 300 AF -In very good condition- - Extendable dough bowls for a maximum of 300 kg of dough or 185 kg of flour - A total of 8 tank cars are available - Condition: very good used condition - Dough bowl size: for 300 kg of dough or 185 kg of flour - El. Connection: 50 Hz, 400 V, 49.2 kW, 90 A Viewing and test run are possible.

Used OMB labelling machine 4 heads 3000 BPHTechnical Specifications & Performance DataThe OMB ET 3000 R is a compact rotary labeling machine engineered for precise self-adhesive label application in beverage production and industrial packaging environments. Manufactured in 2016, this second hand unit combines an electronic cam architecture with motorized head height control to deliver consistent, repeatable labeling performance. It is supplied with one complete format set for 0.75L Bordeaux glass bottles and reaches speeds up to 3,000 bottles per hour, making it a strong fit for quality-focused wineries and specialty beverage producers seeking dependable throughput in a used bottling line.Manufacturer: OMBModel: ET 3000 RYear: 2016Production speed: up to 3,000 bphConfiguration: 4-position rotary carousel with electronic camLabeling technology: 2 self-adhesive (PSL) stationsIncluded forma ...

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 300, Control panel: Stainless steel Control box, Controls, Thermomete ...

Lift system, Megamat FSE 7.1, approx. 6.91m high, min. 331kg / Shelf, Shelf: approx. 3.06m x 81cm – used - : Price ex location: 18.500.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat Type: FSE 7.1 3060/816-6910 Device number: 500002536 Year of Make: 2008 Permissible total load capacity: 70,000kg Load capacity per tray: at least 331kg (possibly also 414kg or 536kg, depending on which type of tray is installed, unfortunately cannot be clarified in advance). Number of shelves: approx. 50 pieces Shelf size: 3060 x 816mm Device dimensions: Width: approx. must be submitted later (width should be approx. 3,450mm) Depth: approx. must be submitted later (depth should be approx. 3,200mm) Height: approx. 6.91m 3/N/PE 230/400V, nominal operating current 17.8A, fuse supply line: 25A Condition: good Available: from approx. End o ...

table length: 1300 mm table width: 800 mm stroke height: 1015 mm weight max. in kg: 3000 kg : 220 mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 300 Kg Magnetic field: 228 x 122 mm weight: 16 Kg dimensions: 0,23 x 0,122 x 0,112 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2200 mm table width: 1500 mm stroke height: 1900 mm weight max. in kg: 3000 kg total power requirement: 1,5 kW stroke speed - idle stroke upwards: 55 sek. stroke speed - idle stroke downwards: 30 sek. connected load frequency: 400 V weight of the machine ca.: 0,650 t dimensions of the machine ca.: 2,2 x 1,5 x 0,3 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 2000 Kg Magnetic field: mm weight: 80 Kg dimensions: 0,5 x 0,25 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1000 x 600 x 300 mm table load: 300 kg total power requirement: 1,1 kW weight of the machine ca.: ca. 350 kg dimensions of the machine ca.: 1,30 x 1,00 x 2,65 m LACHNIT Tilting and Lifting Device Stainless steel column, welded steel container Container dimensions: 1000 x 600 x 300 mm Discharge height: 1.460 mm Control via push-button at column and pendant control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Lastbock: with foldable rotatable load bracket -Type / load capacity: see photo -Base plate: 260 x 200 x 20 mm -Tube: 100 x 100 x 210 mm -Bores: Ø 16 mm -Number: 4x load jack available -Price per piece -Weight total: 15 kg / pc.

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Lastbock: with foldable rotatable load bracket -Type / load capacity: see photo -Base plate: 260 x 200 x 20 mm -Tube: 100 x 100 x 270 mm -Bores: Ø 16 mm -Number: 4x load jack available -Price per piece -Weight total: 16 kg / pc.

Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table -Load capacity: 1000 kg -Platform: 3000 x 2000 mm -Dimension retracted: height 390 mm -Dimension extended: height 2000 mm -Hydraulic unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3000/2000/H390 mm -Own weight: 2100 kg

Vacuum lifter, vacuum lifting device, vacuum suction cup, plate lifter -Manufacturer: Rice, -Description: Vacuum lifting device without control -Previous use: Handling of solar panels -Condition: very good, only been in use for a few months -Vacuum pump: Becker Vt 4.16 0.55 kw -Steering: -Suction cups: Ø 25 mm -Lifting device: travel Z= 1780 mm -Individual components: see photos -Dimensions: 3000/850/H2480 mm -Total weight: 580 kg

Mobile lifting tipper, built in 2018 Good, used condition, ready for immediate use. If you are interested, we will be happy to send you a video link of the tipper in action Price € 5,500 net

Model: B, Tilting height: 2800 mm, Working load: max 350 kg, Container: tote bins, 200 & 300 litre, Power: 3 x 400V, 50Hz, 1.5kW, Dimensions: 1700 x 1800 x 3600 mm, Weight: 500 kg

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Kiener Skinetta Pac-Systeme ASK-300 bundler and stretch wrapper, output up to 32 packs per minute. Maximum reel width 300mm. Maximum final pack dimensions 380mm (W) x 360mm (L) x 290mm (H). Includes stacking unit.

Alfa Laval MMB 305 Skid

Material: stainless steel Volumes: 3,000 litres new machine We build the mixer you require. Do you need a whole plant from used or new components? Write us below!

Material: Steel Engine: 15 kW Other data and price on inquiry. You can also get the entire system with all components.

Specifications: Dosiebunker DB 3000 Dimensions: 1.50 x 2.50 x 2.75 (L x W x H) Can be used in cable recycling for granulator filling, granulate processing, plastic films, wood chips, etc. Features -Content: 3 qbm -Ruehrwerk, drive: 5.5 KW -Fuellstand control sight glass -Adjustable machine feet -Dosing screw discharge 200 mm diameter, speed control of the screw via frequency control at the control cabinet via Poti, Drop height 700 mm, screw drive power: 0.75 KW Optional with conveyor belt for filling Dosing Bunker DB 3000 Dimensions: 1.50 x 2.50 x 2.75 (L x W x H) For Cable Recycling by the Cutting Mill filling, PVC Granulate, PP or PPE, and many more Amenities -3 qbm -Agitator, Drive: 5.5 KW -liquid level indicator -adjustable machin feed -metering device for the spiral conveyer, Diametre: 200 mm, speed control for the spiral conveyer by Frequen ...

Cat. No. 12-1165 in very good condition Measurements and Weight: LxWxH: 136 x 44 x 113 cm Weight: 125 kg 3 kW 60 l/min., 3600 l/h 2 bar DN 65 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 13-0029 in a very good condition Testing water by 22°C back pressure at 1 bar pressure: 0,4 bar capacity: 7800 l/h motor: 0,55 kW Connection: iniet: DN 65/outlet: DN 50 according to DN 32676 can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Length: 60 cm 45 cm Width: 25 cm 21 cm Height: 74 cm 40 cm Weight: 40 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kosme KSB 3000, with 3 tools, achievement approx. 3300 Fl/h with 1.5 l

Steel tank 30000 litres / 30 m³ / underground tank / firefighting water tank / double-walled / Rain water recovery tank / water cistern good condition, underground storage tanks, water tank, underground tank, diesel tank, heating oil tank, double-walled steel tank, Content: 30 m³ / 30000 litres Material: steel tank according to DIN 6608 Dimensions / size: approx. Ø 2.00 m x approx. 10.00 m long Weight: 6 tons Other: outside with bituminous insulation, double-walled, incl. test certificates. The container is used, inside empty and properly cleaned. According to the age traces are present. Steel tank / container can manure, as a storage tank for water, AHL, ASL, seeping juice, canola oil, rain collection tank, used fire-fighting water tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your de ...

to German Institute for Standardization 6608 - outside with bitumen isolation. L = approx. 10.00 m / D = 2.00 m / weight approx. 6.0 to. / ex works, freely charged. the container is used, emptied inside and cleaned. The container was amended in our work from the outside and was postisolated with bitumen mass. Nevertheless, insulating damages by transport can exist in the container.

Approx. 30 lfm shelf shepherd, type R 3000 Over 300 meters present as good as new, 50 cm depth present Negotiation price: € 2,330.00 net Offer consists of: Approx. 30 lfm shelf, 2.3 m high, 50 cm deep, 100 kg load/compartment. Field width approx.100 cm 31 pcs stand or frame, 2.3 m , galvanized 150 pcs. shelves, 100kg load/compartment, galvanized 7 St. Cross Associations for Stiffening. 5 levels per field (several are of course possible at an extra cost) Other compilations possible. Heights 2.3m, 2.5m or 3m available. Shipping/transport costs on request Visit possible at any time by appointment. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or offer numerous items from various areas on an ong ...

CALIBRATING SANDING machine model LC 220 second hand machine volt.380/50 n.1 calibrating roller motor power Hp 6 carpet feed ( 2 speed ) motor power Hp. 0,5 / 0,75 max. working width mm. 220 max. working heigth mm. 150 belt dimension mm. 2020 x 240

3-roll hydraulic with dual pre-pinch planetary configuration. new to complete, 45 days from order. -Plate width 3000 mm -Capacity rolling plate thickness 50 mm -Pre-pinch plate thickness 40 mm Machine configuration and accessories installed: -useful surface length on the rolls 3100 mm -upper roll size 480 mm -lower rolls size 440 mm -Digital position readouts. -Hardening treatment of the 3 rolls. -3 rolls driven hydraulic motorized with independent axial gear box on each roll. -Conical plate bending attachment with tiltable lower rolls hydraulic. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation instruction manuals. -Hydraulic diagrams -Electric & electronic schematics with parts list. -Set of service tools for maintenance. -Electric power installed 50Hp. -3 phase voltage to be specified Warranty 12 months.  ...

Make: Netzsch Type: NES 30A No.: 40500562 / 01 Machinenr.: 255281 Year of construction: 1994 very good condition Gear: Stöber Type: C002N-0041-D90 L4 No.: 1088609 n = 330 min-1 Engine make: DIEZ Power: 1, 5kW Dimensions: LWH = 1300x250x270mm Weight: approx. 80 kg 2. Pump: identical, but with an off switch and adapter onto screw approx. 50 l Total height: 900 with funnel

Type: LKM 3027 Just: 2213857 ZwischengetriebeNr.: 318978 Disco built gearbox Lenze Type: 11711.06.16 No.: 6/7000/2365 N1 = 1500 min-1 N2 = 65-375 min-1 Engine: Loher power: 2,5 kW on mobile carts Condition good Dimensions: LWH = 1300 x 350 x 750 mm Weight: approx. 100 kg

Pallets chain segment with duplex chain for transverse with SEW drive 4 lines L 3000 3 pallet transverse 3250,- 4 lines L 2100 2 pallet transverse 3050,- 4 lines L 1300 for 1 pallet transverse 2850,- 3 lane L 3000 3 pallet transverse 2960,- 3 lane L 2100 2 pallet transverse 2760,- 3 lane L 1300 for 1 pallet transverse 2560,- Altitude 600 mm +/-100 mm Base in painted version, V SQM A version for an additional fee

The SERVOCUT 302 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machine  ...

; operational