hook lift 30 used for sale

A complete transformer station is available. Lifting lugs upper part/basement part: RD42/RD36, overall dimensions X/Y/Z: approx. 3000mm/7600mm/3050mm, weight upper part/basement part: 22500kg/15000kg. Only the building without transformers is sold. An on site inspection is possible.

The following components make up the full WM-3000 series kit:PositionModel/ArticleDescriptionOrigin1WM-3000Coordinate Measuring System (Main Head) Japan 2WM-S1Camera Stand (Kamerastativ) —3—Laptop with Measuring Software —4WM-8C1Battery Charger (Akkuladegerät) China 5WM-B1Battery (Messstab Akku) China 6—Training Fee for WM series —7WM-V30DService Package —8OP-88032Mouse, German User Manual, and WM accessories Find more here - / Contact us at -

grinding diameter: 515 mm grinding length: 3000 mm centre height: 250 mm turning speed range: 11,2 - 355 U/min quill stroke: 40 mm morse taper: 5 rapid adjustment: 70 mm spindle turning speed range: 1080 - 1860 U/min workpiece weight: max. 500 kg table speeds: 0,05 - 5 m/min total power requirement: 17 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 8,0 x 3,0 x 2,6 m Universal external cylindrical grinding machine - coolant tank & magnetic filter - feed with adjustable stop - tailstock with air bearings - workpiece spindle - various steady rests The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 340 mm turning length: 950 mm control: OSP P300L turning diameter over bed: 580 mm turning dia. over face-slide: 470 mm Workingspindle:: power capacity - main spindel: 22/15 kW turning speed range - main spindle: 45 - 5000 U/min spindle diameter: 120 mm spindle bore: 80 mm max. bar capacity: 72 mm spindle head: JIS A2-6 spindle cone: 82 x 2° Torque: 350 Nm travel -z axis: 1010 mm feed per revolution: 0,001 - 1.000 mm rapid traverse: 30 m/min x - axis: travel -x axis: 260 mm feed per revolution: 0,001 - 1.000 mm rapid traverse: 25 m/min C-Axis: 0,001 ° Rapids C - Axes: 200 min -1 rapid traverse: 12 m/min y-axis: 120 mm total power requirement: 31,7 kVA weight of the machine ca.: 4,6 t dimensions of the machine ca.: 2,2 x 1,8 x 1,8 m â½ing and milling centre equipped with: - CNC control OSP P300L - NC tailstock - 12-position turret with driven tool station (BMT 60 ...

Vessel manipulator ELEV 300KG, max vessel weight 300 kg

ARSILAC Stainless Steel Vessel 1000 Ltr. CUVE INOX 304

Two CNC dual spindle PCB milling machines Wissner are available. Spindle power: 3.6kW, min. cutter diameter: 2mm, max. speed: 40000rpm, machining dimensions X/Y/Z: 3000mm/1250mm/100mm, max. feed rate X/Y: 20m/min, max. feed rate Z: 4m/min, clamping device: vacuum, vacuum capacity: -0.9bar, max. sheet thickness: 6mm, axes: 3, tool positions: 2x8, control: Heidenhain/CATIA V5/ASCO, years of manufacture: 2002/2003. Documentation available. An on site inspection is possible.

swing diameter: max. 450 mm chucking diameter: 400 mm control: Siemens 840D (Index) Main spindle:: Max. rpm: 4.200 min/-1 power capacity - main spindel: ( 35,5 / 56 ) kW max. Torque: ( 340 / 550 ) Nm C-Axis: 0,001 ° turret:: number of toolpositions: 2x 12 pos driven statition: 2x 12 pos worktool system: VDI 30 max. spindle speed driven tools: 6.000 U/min. power capacity - driven tools: 9,5 kW max. Torque: 40%: 19 Nm Y - Axis: +/- 90 mm B-Axis: +270° / -90 ° axis stroke:: x-axis: 730 mm z-axis: 340 mm y-axis: +/- 90 mm b-axis: +270° / -90 ° feeds:: rapid traverse: X: 40 / Z: 30 m/min pallet changer:: numbers of pallets: 24 pos. size of pallet: 410 x 300 mm max. workpiecediameter: 300 mm max. workpiece weight: incl. Pallet: 25 kg Chain width: 75 mm band speed: 7,5 m/min total power requirement: 56 kW weight of the machine ca.: 9,0 t dimensions of the machine ca.: 8,5 x 6,0 x 2,7  ...

SORMEC heat press with: - 3000x1300mm assembled tops - 2 intermediate shelves / 3 load compartments - 6 lower hydraulic pistons, 600m stroke - Hydraulic pistons for blockboard mounted on the 1300mm side - with electric water boiler Machine not compliant with CE regulations, for export VISIBLE INSTALLED AND OPERATING UNTIL JUNE 2026

1 pump, made by Gardner Denver, built in 2019, 2 pump, made by Rietschle, built in 2002, 0.5 mbar (abs.), 300 m³/h, 5,5 kW, on 2 stainless steel frames,

CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Compact 3001.15P Year of construction: 2024 Working area: 1,500 x 3,000 mm 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O²,N²) 1 x TEKA filter system outdoor installation 1 x nesting program on the machine control Availability: immediately

B&A REF: 9272 TON: 85 SCREW DIAMETER: 35MM SHOT WEIGHT: 155 STROKE VOLUME: 170CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 590 X 570MM DBTB: 400 X 360MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 450MM MOULD OPENING STROKE: 360MM MAX DAYLIGHT: 810MM EJECTOR STROKE: 125MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 7.5KW SCREW DRIVE: HYDRAULIC

For sale is an air-cooled chiller. The regulated water pump and the controlled fan make it particularly efficient. It has an integrated plate heat exchanger, an expansion tank, very quiet fans made of composite materials, and compressors mounted on vibration dampers. Partial load operation with 33% and 66% enables energy-efficient operation. The Touch Pilot control with 4.3" colour display offers a wide range of individual setting options such as time settings or night mode. Dimensions: LxWxH 2340 x 2320 x 1530 mm, weight 1,020 kg

Trade fair and exhibition machine, available immediately, Dynamic checkweigher to avoid underfilling and overfilling, reducing rejects and costs., IFS - fair production control,, Thanks to the gripper infeed conveyor, it is ideal for tall containers such as round or oval plastic bottles filled with mayo, ketchup, mustard, etc., without discharge and buffer tank., Max. throughput (pieces/min): 250 (depending on product dimensions and weights), Gross weighing range = 3,750 g, Working height = 800 – 950 mm, Degree of protection: IP 65, Feeder belt: 300 x 150 mm, Weighing band: 200 x 150 mm, Discharge belt: 300 x 150 mm, Total length = approx.: 2,010 mm, 2 page clamping bands in VA with central adjustment (600 x 50 mm),, 2 knife edges on conveyer belts, Weighing belt full cover with hinged lid, 2 additional support feet for inlet and outlet belt, MID workpiece preparation, Series fault det ...

The GEA decanter is sold together with the PLC control system and was used in oil production. The decanter has a central lubrication system and has been running for more hours.

diameter: - mm workpiece length: - mm work piece width: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1000 mm turning length: 3000 mm control: Siemens 828D turning diameter over bed: 1000 mm turning diameter over slide rest: 700 mm workpiece weight: t spindle drive motor: 33,6 kW spindle turning speed range: 1 - 550 U/min centre height: 510 mm x-axis: 520 mm z-axis: 3020 mm spindle bore: 260 mm spindle nose: A2-15 tailstock quill taper MT: 5 diameter of quill: 130 mm tailstock quill stroke: 200 mm rapid travel (x and z-axis): 8 m/min total power requirement: 40 kVA weight of the machine ca.: 12,2 t dimensions of the machine ca.: 7,52 x 3,2 m - Siemens 828D CNC - C-axis - 8-station tool turret with powered tools (VDI 50), 3000 rpm - Tailstock - Powered tool holders - Chip conveyor - CE Operating hours: 2000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete line for washing/sterilising/filling/sealing/labelling/stretch-banding open funnel/stem cut ampoules made of glas, consisting of: • Bosch RRU 3063 washing machine • Bosch HQL 2220 sterilising/pyrogenising tunnel • Filling/capping machine Bosch ALF 4060 • Labelling machine Bosch ERS 2010 (500) • Folding box cartoning machine Bosch CUK 1060 for 12 ampoules/carton • Skinetta ASK 450-bU banding machine • Output max. 18,000 ampoules/h depending on size: - 1 ml, 18,000 ampoules/h - 2 ml, 18,000 ampoules/h - 3 ml, 16,800 ampoules/h - 5 ml, 13,500 ampoules/h - 10 ml, 9,900 ampoules/h - 20 ml, 6,000 ampoules/h • Capacity for ERS 2010 max. 30,000 ampoules/h • With format parts for 1 ml ampoule Ø 10.75 x H 65.0 mm (unfilled, open), H 45.0 mm (filled, closed) • Menu languages English, Mandarin • PLC Siemens S7-300 • Danfoss VLT 2800 servo inverter • CE decla ...

Bottle washing machine O + H Contina type E44C / 302-110 year of manufacturing: 1995 capacity approx. 30.000 bph incl. Siemens S7 PLC control system incl. HMI touch panel incl. fully automatic bottle transport system incl. integrated safety systems and emergency stop incl. electrical control cabinet The machine is made of stainless steel and it is suitabble for returnable glass bottles. The machine is still in production until November 2026 in Germany.

Glass Bottle Filling Line, 3000 bph, with Markl Bavaria Counter Pressure Filler This complete bottling line was delivered by the German manufacturer Markl Brauereimaschinen in 2015 and is still in operation. The line consists of a semi-automatic bottle off-loading system, where new bottles are lifted layer-by-layer from pallets onto the feeding table. It also includes a VELA CW 30 linear labelling machine for self-adhesive, single roll-fed labels. The filling system is a Markl Bavaria type 12/3 VKL 12 counter-pressure filler equipped with 12 filling valves, a single air pre-evacuation system with CO₂, a rotating filler, and a 3-head crown capper. The highly efficient pre-evacuation vacuum is vented directly from the center of the bottles. Pressurizing CO₂ gas is introduced at the bottom of the bottle—precisely where the beverage flows smoothly into the container. The CO₂ cush ...

Key data: 3

Volume flow 300 (50 Hz) / 360 (60 Hz). m³/h Pressure difference approx. +240 to +260 mbar (50 Hz). Engine power 3.0 kW (50 Hz) / 3.6 kW (60 Hz). Speed approx. 2850 (50 Hz) / 3370 (60 Hz). Current consumption (50 Hz) 15.9 A () / 9.20 A (Y). Degree of protection IP55 (standard, see type protection). Voltage 200 - 480 V Weight 53 kg

Used machine Machine Type: CNC Turning Center Model No.: NLX3000Y/3000 Manufacturer: DMGMORI Control: Celos Year of Make: 2020 #001355 Turning diameter max. approx. 420 mm Turning diameter standard approx. 310 mm Chuck size approx. 300 mm Turning length approx. 3,123 mm Rod diameter max. approx. 90 mm Turret stations approx. 12 X-axis approx. 280 mm Z-axis approx. 3,170 mm Y-axis approx. 120 (±60) mm Tailstock approx. 3,164 mm Spindle speed max. approx. 3,000 rpm Speed AGW max. approx. 6,000 rpm Rapid traverse X/Z approx. 30 m/min Rapid traverse Y approx. 10 m/min Rapid traverse C approx. 300 rpm Power consumption approx. 54 kVA Compressed air bar,L/min approx. 5, 100 bar,L/min Footprint L x W x H approx. 8.30 x 3.50 x 2.41 m (without chip conveyor) Machine weight approx. 14,200 kg Main spindle 22/18,5KW • 3jaw chuck set • rpm 3000 • 12 station turre ...

Inv. Num. : 9001 Type: E-30160 Producer: DURMA Created: 2006 Parameters: Control system: DNC 60 hp Compressive force: 160 t Maximum bending length: 3050 mm Weight of the upper tool: 40 kg Reduce tool weight: 55 kg Stroke: 200 mm Machine height: 2700 mm Machine length: 4200 mm Machine width: 2100 mm Machine weight: 9820 kg

Presse à injecter SANDRETTO Micro 30T E SANDRETTO micro 30T E247 Version 2 GEFRAN Interface robot Euromap 12 Boite à eau 4 voies Tableau de prises

- technically efficient, ready to work – after full service - motor power: 2.2 kW - cutter diameter: 300 mm - milling angle: +45° / 90° / -45° - pneumatic profile clamping - cooling and lubrication system - compressed air preparation station

Hobbb sharpening machine KAPP AST305

Offer 26041 Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 180 mm - Top height with base approx. 810 mm - Thickness of the top plate approx. 115 mm - 11 T-slots in table surface length 1500 mm - Center distance of the T-slots in the table surface 250 mm each - T - groove width approx. 40 / 22 mm - T - groove depth approx. 16 / 24 mm - Space requirements L 3500 x D 2500 x H 1100 mm - Weight approx. 4500 kg

Regloplast temperature control unit Bj 2011 Technical data in the pictures Price is net plus VAT Dismantling and loading by buyers All information without guarantee

Cream separator (Skimmer) for separation of milk or whey. Self cleaning. Machine comes with the bowl, motor (45 kW), motor cover, cyclone sludge tank, base plate, feet, watervalves (original Westfalia), main control cabinet with frequency converter (ABB) and control panel with Allen-Bradley SLC 5/03 CPU Processor and Allen Bradley PanelView 1000. Controls upgraded in 2008 by GEA Westfalia. Endress + Hausser Promass 83 Flowmeter., Type of Machine: Cream Separator, Capacity: 35.000 liter per hour, Bowl speed: 4.800 rpm, Motor: 45 kW - 460 V - 74 A - 1.775 rpm - 60 Hz - 3 Ph, Weight: 3.300 kg, Dimensions: 210 x 125 x 235 cm

Used parts: Milling shaft / 2-speed gearbox SelectaTilth / Final drive: gears, chain, side cover, cork seal etc.

The machine is in good technical condition, testing possible after prior agreement. Max. rotating diameter 480 mm (approx. to the current design of the workpiece removal blade) Max. machined diameter 340 mm Max. turning length 785 mm Collet + 10 hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) hydraulic through-cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor Speed ​​range 45 - 5,000 min-1 Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001 increment Secondary spindle Speed ​​range 50 - 6,000 min-1 Power/continuous operation 11 kW/7.5 kW Spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) hydraulic thr ...

sheet width: 3000 mm plate thickness: 2,0 mm distance between columns: 3140 mm daylight opening: 80 mm total power requirement: kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: 3,8 x 1,5 x 1,6 m Pneumatic segment bending machine - Manual backgauge max. 830 mm - Bending angle preselection via limit switches The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheeter Rondo Doge Compas 3000 Rondo Doge Model: SFA 612 Compass Touch computer control for all doughs for rolling out and touring with reel on the right for rolling up Connection 400V, 16A-CEE plug Used machine from the bakery

Key data: 3000 mm, 800 mm, 720 mm

Control: Smooth X Travels X-axis: 3,000 mm Y-axis: 800 mm Z-axis: 720 mm B-axis: 220° C-axis: 360° Table Table: 3,500 mm x 820 mm Max. table load: 2,500 kg Milling spindle Drive power: 35 kW Max. spindle speed: 18,000 rpm SK-40 Tool magazine Number of tool positions: 48 Special accessories Additional work area light Tool magazine with 48 tool positions Rotary table diameter: 500 mm Chip conveyor Mayfran, ejection High-pressure pump 15 bar incl. gap filter Synch. Threading Rapid traverse constant angle of inclination Ethernet Operation Function Cylinder interpolation Hours Switch-on time: approx. 12,000 hours Spindle hours: approx. 4,500 hours

Key data: 3000 mm, 40 mm, 35 mm

PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE INITIAL PINCH Machine used in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven hydraulic powered on gear unit • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening of top roll hydraulic drop-end to unload the plate fully round closed. • Variable speed working roll bending rotation hydraulic speed fast/slow.  ...

4 ROLL HYDRAULIC DUAL PRE-PINCH 3000x15 MM PLATE BENDING MACHINE NEW Brand MG model M3015 -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat -safety and emergency systems installed -manuals and schematics along with the machine

Key data: 3 mm, 10 mm, 1 mm

Guillotine shears from a company liquidation Worked as a cutting center with automatic stacking device make Theis Control cabinet , built in 2015 new Front support arms 1,000 mm Service regularly performed according to plan 3,000 x 10 mm

Sourdough plant Isernhäger 300 ASB used Product descriptionManufacturer : Ritter / IsernhägerType : 300 ASBSower dough stirring kettle sourdough containerIsernhäger the baking culturecompletely in stainless steelKettle capacity 300 litersDetails see pictures

used sourdough plant IsernhägerProduct descriptionManufacturer : IsernhägerCa. 300 liters sourdough stirring kettle sourdough containercompletely made of stainless steelKettle capacity approx. 300 litersDetails see pictures

used sourdough plant Isernhäger B 300Â Product descriptionManufacturer : IsernhägerType : B 300Sourdough stirring kettle Sourdough containerIsernHäger the baking culturecompletely in stainless steelKettle capacity 300 liters Mobile on rollsDetails see pictures.

used sheeter Fritsch 30W/650Â Manufacturer: FritschModel: 30W/650Analog controlStainless steel on rollersHinges foldableThe Fritsch 30W/650 sheeter is a special machine used in bakeries and other companies in the food industry to roll out dough evenly and precisely. This machine is usually used for processing dough for croissants, puff pastries, pizza and other baked goods. The Fritsch 30W/650 is designed to roll the dough to the desired thickness and size to create an even texture

Corrugated woodâ€" Rolling pin - rolling pin with wooden handles 300 mm( 2 pieces )Solid beech wood heavy-duty professional qualityRoller width: 300 mmDiameter: 90 mmWeight: 1720 gWith smooth-running stainless steel ball bearingsDetails see picture

Cake ring made of aluminium à ̃ x H: 300 x 60 mm NEW( 10 pieces )Dimensions: à ̃ x H: 300 x 60 mmMaterial thickness: 2.0 mm

Machining length X: 5000mm, machine dimensions X/Y/Z: approx. 7500mm/3500mm/3500mm, weight: approx. 14000kg, control system: Heidenhain 426, operating hours: 91758h, running hours: 36086h. Including tool changer and tool holders. Without extraction system. Documentation available. An on-site inspection is possible.

A continuous twin-shaft paddle mixer WAM is available. Throughput capacity range: 5m³-12m³/h, max. liquid addition: 20%, material: 1.4404, process: mixing/conditioning/granulation/neutralization, weight: approx. 700kg. Documentation available. An on-site inspection is possible.

Machine Type: Profile Bending Machine Make: COMAC Type: 308 Year of manufacture 2004

AKEBONO OB 300 Band width: 29-30 mm, Mechanical speed max: 24-30 straps/min banding width: 20 x 380 mm banding height: 5 - 200 mm table depth : 330 mm banding material: paper, foil, clear polyfilm band

Edhard Berliner Filling Spout F-3076 1 Pair Stainless Steel NewâœProduct Descriptionâœ" Manufacturer: Edhardâœ" Type: F-3076âœ" Material: Stainless Steelâœ" Condition: Newâœ" Size: à ̃ ̃ 7.1 x 57.0 mmâœ" Spout smooth / for double funnelâœ" for filling BerlinersDetails see pictures. We have a wide range of machines and accessories for bakeries, pastry shops and restaurants. Feel free to contact us or take a look at our other advertisements.

VOUMARD Model: CNC 300 Condition: Excellent Year: 2007 Machine type: BU 1000 T L7400 Was recently removed from power due to routine upgrades and was making good parts with full functionality. Siemens 840D CNC Control. Manuals included. Has grinding capability for: Internal diameters External diameters Front faces Back faces Internal tapers External tapers Profiles Drive spigots Face keyways Cams Bilobes and trilobes Internal threads External threads Bearing tracks Travels Display .0001degrees or .0001mm A - 360 degrees - 34 t/min B - -20/+1 degrees - 240 degree/min C- 360 degrees - 500 t/min U- 300mm - 20 m/min X - 300mm - 20 m/min Z travel - 1000mm - 20 m/min 4 position turret Workhead Through Bore - 50mm Rotation Speed - 850 Max workpiece weight - 200 daN at 100 mm from flange Taper - metric 70 Weight - 8000kg

Professional rolling pin, rolling pin, dough roll 30cm NEWâ Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against loosening of the handles• wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 30 cm• Total length: 57 cmDetails see pictures