hook lift 30 used for sale

Shock absorber, gas spring, shock absorber, start-up damper, impact damper -Manufacturer: GSL (German Standard Lift), Gas spring, Gas pressure spring, 2 pieces -Type: 250N 11/14287251554/00101 -Piston: Ø 28 mm -Piston rod: Ø 14 mm, length 750 mm -Socket: M10 x 1.5 -Price/Fee: complete -Dimensions: Ø 28 x 1585 mm -Weight: 2.1 kg/piece

hydraulic motor, oil motor, hydraulic pump -Manufacturer: GSL (German Standard Lift), Hydraulic pump for driving work platforms -Type: 730-0080-130-002 -Drive shaft: Ø 25 x 40 mm -universally applicable -Number: 1x engine available -Price: per piece -Dimensions: 240/135/H130 mm -Weight: 13.2 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: GSL (German Standard Lift), hydraulic cylinder stroke 480 mm -Type: E030ZM2 R 16 -Piston rod: Ø 30 mm -Hole: Ø 24 mm -Dimensions: 545/82/H60 mm -Weight: 6 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), Hydraulic cylinder: 480 mm -Type: E030ZM50479 S 49 -Piston rod: Ø 30 mm -Hole. Ø 20 mm -Number: 3x cylinders available -Price: per piece -Dimensions: 605/100/H80 mm -Weight: 6.8 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder with valve block -Type: D040025AAV10140 T08 -Stroke: 140 mm -Piston rod: Ø 25 mm -Receiver. Ø 20 mm / Hole spacing 320 mm -Dimensions: 360/200/H80 mm -Weight: 7.6 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV30290 S46 -Stroke: 290 mm -Piston rod: Ø 50 mm -Hole diameter 50 mm / hole spacing 530 mm -Dimensions: 610/145/H220 mm -Weight: 38 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D0630320LV2S01 -Stroke: 95 mm -Piston rod: Ø 32 mm -Hole diameter 30 mm / hole spacing 290 mm -Dimensions: 340/117/H105 mm -Weight: 8 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder stroke 280 mm -Type: E030ZM60279 T18 -Piston rod: Ø 30 mm -mount. Ø 19 mm -Dimensions: 395/83/H70 mm -Weight: 4.4 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV70290 -Stroke: 290 mm -Piston rod: Ø 50 mm -Pipe Ø outside: 135 mm -Hole diameter 50 mm / hole spacing 530 mm -Dimensions: 610/145/H240 mm -Weight: 38 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders -Manufacturer: GSL (German Standard Lift),,Hydraulic cylinder single-acting stroke 280 mm -Type designation: E030ZM3 R 01 -Piston rod: Ø 30 mm -Hole: Ø 20 mm, see photos -Number: 2x cylinders available -Price: per piece -Dimensions: 350/75/H76 mm -Weight: 3.8 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV90185 -Stroke: 185 mm -Piston rod: Ø 50 mm -Hole diameter 40 mm / hole spacing retracted 415 mm -Dimensions: 485/160/H145 mm -Weight: 29.1 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), single-acting hydraulic cylinder, stroke 170 mm -Type: E0400180H30020 T17 -Piston rod: Ø 18 mm -Tube: outside Ø 50 mm -Hole: Ø13 mm -Dimensions: Ø 50 x 275 mm -Weight: 2.9 kg

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, steel rims, rims -Manufacturer: GSL German Standard Lift, 5-hole steel rim -Type: 6.50F-10 ET-17 604700 -Hub bore: Ø 67 mm -Bolt circle: Ø 112 x 15 mm -Quantity: 8x rims available - Price: per piece -Dimensions: Ø 298 x 195 mm -Weight: 7.7 kg/pc.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 63 mm -Piston rod: Ø 50 mm -Pipe outer diameter: 75 mm -Stroke: 500 mm -Total length when retracted: 730 mm -Piston rod mount: Ø 44 mm ball head -Hole diameter: Ø 30 mm -Quantity: 5 available -Price: per piece -Ideal for building a hydraulic press

Vacuümhefunit - Type: V01174 - Maximaal hefvermogen bij 60% werkvacuüm: 1650 kg - Gewicht: 700 kg - lengte: 10,3 meter - breedte: 500 mm - hoogte: 950 mm

General SKU349U858 MakeServolift LocationBarneveld CEcheck TypeHF 250 Main Features MaterialStainless steel/Aluminium Motor1.5 KW Height2950 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304) Lifting machinecheck Lifting + tilting machinecheck Max. weight250 kg Lifting heightmin. 400 mm: max. 2950 mm Tilting heightmax. 2950 mm Hydraulic drivecheck With hydraulic unitcheck (Merk: LOTZ, type: MC4-V1B-PM-MN-T07-F5) Motor1,5 kW, 400 volt, 1400 rpm Suitable for product sizesDia. 570mm Information No.10815 Year of construction2003 With switchcheck Floorspace0,65x0,67 m Total height4 m Weight650 kgPlastic & polymersLifting/tilting machinesCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceu ...

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: GSL German Standard Lift, directional control valve -Type: 4070150000 EL -Pmax: bar -Number: 3x valve available -Price: per piece -Dimensions: 236/46/H70 mm -Weight: 2.2 kg/pc.

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: GSL German Standard Lift, directional control valve -Type: 4070030000 BK -Pmax: bar -Number: 2x valve available -Price: per piece -Dimensions: 236/46/H70 mm -Weight: 2.2 kg/pc.

Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)

General SKU437W1415 LocationBarneveld Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacity20 l. Vessel sizesDia. 550x600 mm Dished bottomcheck OutletPneumatic valve With jacketcheck With propellor stirrercheck Motor0,37 kW, 220/380 volt, 1410 rpm Information MakeMedimex TypeMED 265 Mounted on legscheck With switchcheck Floorspace1,10x1,0 m Total height2,20 m Weight850 kg Extra SpecificationsWith ToolTemp temperature controller, type TT400, stainless steel vertical pressure vessel, volume approx 30 l. Stainless Steel ReactorsMedimexReactors > Stainless Steel ReactorsBrand > Medimex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- ...

2 PC. stainless steel chimneys outside diameter 300 mm, inner diameter 200 mm, length 7 m 1 STK. stainless steel fireplace outside diameter 400 mm, diameter 300 mm, length 7 m Price VB

Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg

System: Used decanter / centrifuge Manufacturer: Baker & Hughes Model: full coat screw centrifuge Type: CP 3054 Year of construction: 1999 Höchstzul. Speed: 3132 I/min Inner diameter drum: 552 mm Drum wall thickness: 14.5 mm Engine: 2 electric motors, new Auger motor Control Panel: no Frequency converter: Yes Documentation: Yes Maintenance: regularly twice a year In operation: By early 2015 Buying and renting possible.

Hydraulic radial engine manufacturer Calzoni MR. 3000-F1N1N2S2NX 0401 / 46528, 656592 250 bar Used Husky injection moulding machine, type GL225RS60/50

Battenfeld UTR 300 heating controller for control of Unilog 4000 B

Diesel tank - Heating oil tank - Tank system - Steel tank brand new - with 30,000 litres capacity - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is completely repainted - RAL 9010 white. (Other RAL colours are also possible on request!) L = approx. 10.00 m - D = 2.00 m - weight approx. 5.9 to. - ex works, freely charged - General: You will receive a V ...

305m2 Peri Trio 3.30m Peri TRIO is a cranable formwork system that can be used standing or lying down. With the patented BFD alignment lock, all element connections are made flush, flush and tight.  The only necessary connecting part for normal element joints, outside / inside corners, hinged corners, fitting timber compensations up to 10 cm or the clamping of squared timber is the alignment lock BFD (can be operated with one hand).  All floor plans can be formed with just a few element widths.  The powder coating prevents the concrete from sticking and enables quick and easy cleaning.  Maximum permissible fresh concrete pressure: 80kN /m2

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for press brake, die tool -Measures: see drawing in the photos -Dimension: 3060/20 / H79 mm -Weight.: 30.3 kg

electric motor, three-phase motor -Power: 0.18 kW -Electric motor: 3000 rpm -Voltage: 220/380 V -Shaft: Ø 14 x 30 mm -Design: B5 -Dimensions: 250/144/H165 mm -Weight: 6.3 kg

for sale MACC Metal Circular Saw NEW 300 E HSS Circular Saw Blade 300 mm Schnittkep. up to 100 mm round Coolant pump Attack Speeds 40/80 rpm Motor 2-stage 400 V Weight approx. 150 kg Machine base can also be purchased. Further models and inquiries to FSA Maschinen AG

Height indicator, parallel indicator -Max. Working height: 300 mm -Hard metal needle -Dimensions: 175/60/H385 mm -Weight: 1.7 kg

- Including YUDO SIGMA 800cs robot - Clamping force: 3.000 kN

We offer Compressed air tank Flamco STAG 3000 l 16bar 60°C from compressed air system Picture 1-3 The system is part of a compressed air system in a production hall. It is used built in 1995/2016, and fully functional, in very good condition and is offered - due to restructuring of the use of the hall at our customer. specifications: - Manufacturer: Flamco STAG Behälterbau Genthin - Model: 3000l - Year of construction: 1995 - Item No.: 59457 - TüV.: still available -Ab. Operating pressure: 16 bar -Ab. Ground temperature: 50°C - Type marking ZU 295/6 - Dimensions: D 1200 x H 4000 mm - Weight: 704 kg - Craneable The container is still in our customer's factory in Halle all. The sale is ex-works EXW (loading facilities available). The compressed air system Fig. 4 - 10 also consists of -Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air  ...

Base for bending tool, bending tool, die, lower knife, lower tool, prism tool -Lower tool: for press brake -Total length: 3020 mm -Prism: 20 mm x 90° -Dimensions: see drawing in the photos -Total dimensions: 3020/65/H110 mm -Weight: 136 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Thermal Arc, TIG welding machine, inverter welding machine type LS-300 -Welding power: max. 300 A -ground cable -Dimensions: 410/210/H435 mm -Weight: 21.1 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 200 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.5 kW -Speed: 1430 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Dimensions: 700/550/H1200 mm -Weight: 170 kg

Dematic conveyor system Accumulating roller conveyors Roller conveyor 3000-600-540, 750 RA2290 Manufacturer: Dematic Type: Drive unit accumulating roller conveyor Year of construction: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Head and center drive Weight of conveyed goods: up to 30 kg Technical data: SEW geared motor 380V RA2290.1 Manufacturer: Dematic Type: Accumulation roller conveyor extension module Year of manufacture: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Overdrive from RA2290 (necessary) Weight of conveyed goods: up to 30 kg Optionally available e.g: SEW Eurodrive / Movimot frequency inverter Supports Sid ...

Unused, stock item, Model Standard, A4- A6, IP 65, max. load capacity 30 kg, weight 99 kg, warranty

Sturdy supporting structure in painted carbon steel, loading hopper, Shearing size 1.300x900 mm, 2 x 22 kw drives, constructed in 2024, Rotor Length 1.300mm, N.25 knives, knives thickness 50 mm, 2 hooks, Weight about 4.500kg, Shaft speed 15/17 rpm, electric cabinet, complete with CE, users manual, electric drawings, installed power - used power in work: about 60-65% : 44

SINK-FLOAT SEPARATION TANK for PLASTIC SCRAPS, Constructed in thick AISI 304 STAINLESS STEEL with reinforced plates and profiles, Dimensions 5,0 X 1,5 mt., Inlet hopper for shredded plastics, Flanged water in/out ports, taps and ball valves, n.2 x 1,5 kw.driven rollers for material movement with Bonfiglioli gearboxes, n.1 chain conveyor on bottom to extract the sunk materials, n.1 diagonal stainless steel chain conveyor, collection drained auger for extraction of floating material, size: 5,0 x 2,4 mt., capacity: 800-1.500 kg/h depending on materials

BD PLAST NON-STOP SCREENCHANGER, Machine reconditioned Screen Ø 300 mm, suitable for 160 - 180 mm extruders, Heating capacity approx. 25 kW N. 4 heating areas Hydraulic pack., Machine offered reconditioned, complete with Users manual, CE compliance, el.drawings, installed power - used power in work: about 60-65% : 25

Chip Conveyor, Chip Conveyor Belt, Coolant Cleaning, Chip Disposal, Scraper Conveyor, Scraper Conveyor, Chip Chain Conveyor, Hinge Belt Conveyor, Scraper Belt Conveyor – Subject to change – Manufacturer: RUEZ GmbH Type: Chip Conveyor, Scraper Conveyor Year of Make: 2002 TYPE: KF0WW2/306 DAS Conveyor belt width: 310 mm -Outlet height: 1300 mm -Total dimensions: L:4.370/W310/H1.820 mm -Total weight: approx. 800 kg Drive: Manufacturer: Getriebefabrik Cowig GmbH TYPE: SSMAH63 11-362.7 B3 TYPE: Worm Gear Specifications: Gear ratio(s2): 3.82 min-1. Torque (T): 337 Nm. Weight (m): 28 kg

2025 BIG backhoe bucket 30cm with MS03 Symblock attachment, Technical specifications:, - Weight: 104 kg, - Recording width: 30 cm, - Contents: 90 liters, - CAT 4 - suitable for 4 - 5.5 t excavators

2025 BIG backhoe bucket 30cm with MAR03 attachment, Technical specifications:, - Weight: 61kg, - Recording width: 30 cm, - Contents: 57 liters, - CAT 3 - suitable for 2.8 - 3.9 t excavators

Batch mixer with a gross volume of 300 l. (max. usable filling: approx. 200 l.), part in contact with the product in stainless steel V4A, centrifuge equipped with ploughshares, drive via geared motor with 7.3 kW (pole-switchable for 2 speeds), equipped with a cutter head with 4.0 kW (speed approx. 3,000 rpm). Incl. push-button control cabinet and base; Outlet flap manually operated. All tools in very good wear condition.

wird mit neuem VakuumTransportband ausgeliefert. - Producer Fladder - Type Gyro 300 VAC - Working width 1300 mm - Year of construction 1994 - Number of brush heads 6 Stk. - Rotating and oscillating sanding head - Motor power 5 kW - Vacuum transport belt - Feed speed infinitely adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Location - Voltage / HZ 400 / 50

with two vacuum fans - Producer Fladder - Type Gyro 300 VAC-2 - Working width 1300 mm - Year of construction 1997 - Number of brush heads 6 Stk. - Rotating and oscillating sanding head - With sound insulating cabinet - Motor power 5 kW - Vacuum transport belt - Feed speed infinitely adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Location - Voltage / HZ 400 / 50

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 300, Control panel: Stainless steel Control box, Controls, Thermomete ...

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300VA -Primary: 3x380V -Technical data: see photo identification plate -Dimensions: 150/90/H150 mm -Weight: 5.7 kg