hook lift 30 used for sale

Aircooled chiller CARRIER 30KAV 0600 0007 611 KW Cooling capacity: 611 kW / 173.73 tons (12/7 — 35°C) Year of manufacture: 2019 Options: Hydraulic module. Economizer. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 2 pcs. Carlyle 06ZCE1T3AA06013 (screw, inverter) Type of refrigerant: R134А Number of fans: 8 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump Wilo DL80/160(148)-11/2-NGS (Frequency inverter), expansion vessel. Dimensions: 6.74x2.26x2.3 m. Weight: 5604 kg. Working hours: 6080/6068 h. Condition: Good

Offer 25349 Specifications: - Length approx. 3000 mm - Width approx. 2000 mm - Plate height ribbed approx. 400 mm - Top plate thickness approx. 80 mm - Table height with base approx. 820 mm - Weight approx. 6500 kg

2 pieces Short Pitch - Premium smooth running chains

Earth drill 200 mm TBG-300 (8 mm thickness), suitable for Jansen HBG-2000 earth drill, photo is an example photo!

Earth drill 200 mm TBG-300 (8 mm thickness), suitable for Jansen HBG-2000 earth drill, photo is an example photo!

Auger 300 mm TBG-300 (8 mm thickness), suitable for Jansen HBG-2000 auger

Original Kinshofer - Lehnhoff backhoe bucket, 30cm working width with MS01 mount, as new, suitable for Yanmar SV16/18, suitable for 1-2t excavators, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.

Häner hydraulic hammer HX 600SA, Technical specifications:, Construction year: 2025, Oil/min: 20-35 l/min, mass: 120kg, Operating pressure/bar: 88-117 bar

tube diameter: 4 - 28 mm : 3000 mm bending radius max.: 90 ° connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 3,7 x 1,2 x 1,5 m Electro-hydraulic mandrel tube bending machine with - Bending mandrels for 18mm tube - Tools for: 8mm, 10mm, 12mm, and 18mm - PC interface - Laptop - Documentation See images for further accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make: CARRIER Type: 30AWH016H-9 Power: 16kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging

Make: CARRIER Type: 30AWH008H Power: 8kW Weight: 120kg Single-phase 230V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging

Make: CARRIER Type: 30AWH012HD9 Power: 12kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging

Make: CARRIER Type: 30AWH015HD9 Power: 15kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging

Bending capacity: 3/8"-2" Bending angle: 180° Angle turret: 6-fold Mounted bending tool: Ø 28 mm Country of origin: Netherlands Motor power: 3 kW Machine weight: 250 kg Machine LxWxH: 1,000 x 800 x 950 mm

Pressta Eisele Panto 300 copy milling machine - Very good condition - With frequency converter and HF motors - With stop system

De TVM 302 ( meetbereik ~320 mm / ~12 inch) heeft de volgende typische specificaties: Meetbereik: 320 mm (12 inch) Maximaal toegestane fout: 0,02 mm Herhaalbaarheid (2 s): 0,005 mm Frontale vierkantheidsafwijking: 0,02 mm Resolutie: 0,01 mm / 0,001 mm (of in inches .0005/.00005) afhankelijk van het beeldscherm Meetkracht : ca. 3 N Maximale verplaatsingssnelheid van de handmatige wagen : 1500 mm/s. Gegevensuitvoer: Opto-RS232. laboaragon.com+1 Bedrijfstemperatuur : +10 °C tot +40 °C; Opslag: -10 °C tot +40 °C. Gewicht (gietijzeren voet): ~6 kg. 4 keer op voorraad

Manufacturer: Shinkawa Model: ACB-3000 Year of Manufacture: 2010 Condition : Good Electrical Rating - Supply Voltage: 230V - Full Load Current: 7A - Maximum Ampere Rating of the Short-Circuit and Ground-Fault Protective Device: 15A - Short-Circuit Current Rating: 10kA - Phase: Single Phase - Frequency: 50/60Hz Find more here - / Contact us at -

Height=6 m, Overall length= 21 m, Overall width= 3 m, Producer: Ipeka Made in Finland Description Ipeka 2R industrial slicer 13 mm thickness oiling system stainless body good working condition Sale on behalf of customer

Manufacturer: Leica Model: INS 3000 Year of Manufacture: 2001 Electrical Specifications: - Voltage: 115/230V AC - Frequency: 60/50 Hz - Current (I max): 10 A - AIC of Overcurrent Protection Provided: 50 kA - Number of Phases: 1 Laser Classification: Laser Class 1 CE Marked : YES Condition : Good Find more here - / Contact us at -

Inv. Num. : 8772 Type: TruLaser 3030 L20 Producer: Trumpf Created: 2012, GO 2024 Parameters: Hours: 35157 h Switch-on hours: 55771 h Laser power: 3.2 kW Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 20 mm Maximum sheet thickness when cutting (aluminium): 8 mm Feed length Z-axis: 150 mm

Injection moulding machine for PET preforms

Offer 25300 Specifications: - Manual band sawing machine - Saw blade dimensions 2750 x 27.0 x 0.9 mm - Cutting speeds infinitely variable N 15 / 90 m/min - Max. clamping possibility 355 mm - Mitre adjustable li + re up to 30 ° - Cutting range - 90° round 255 mm - Square 190 mm - flat 310 x 190 mm - 45° li + re round 215 mm - Drive 400 V / 1.5 kW - Coolant device - Weight approx. 350 kg - Space requirement approx. W 700 x H 1600 x D 1700 mm

Clamping Force: 300 ton // Shot Weight (Max): 476 g

Cup printing machines

Maximum Diameter: 110 mm // Minimum Diameter: 32 mm

Type Of Laminator: Solvent and Solventless // Working Width: 1315 mm

Max. cutting length: 3050 mm Max. sheet thickness: 6 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cut edge lighting Hydraulic shear angle adjustment Knife sharpened Weight approx. 6500 kg

Capacity 50 tons Stroke 750 mm Table size 1500x1000 mm

Year: 2006 - technically efficient, ready to work – after full service - possibility of mounting 3 milling heads - top and bottom chiseling - control via PLC - automatic machining process

Control: OSP-300LA Year of Make: 2019 Distance between tips or spindle lugs: 1085 mm Circumferential diameter over carriage / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm Travel C-axis: 360 mm Travel W-axis 895 mm Main spindle speed: 45 - 5,000 rpm Sub-spindle speed: 45 - 6,000 rpm Recording: BMT Tool turret: V12 (driven) Equipment: Conveyor One touch IGF Touchsetter 2x 3-jaw chuck Sub-spindle Coolant Plant HMF-980 Suction

Emmegi under-table cross-cut saw with automatic stop Type: Calvet 300 M saw blade coming from below max. saw blade diameter 300 mm with automatic stop – Fence pushes the clippings onto the the cutting position right long table with automatically movable stop left long roller conveyor Weight approx. 500 kg with stop table and roller conveyor

Machine name: 3D Printer Manufacturer: DMG MORI Model: Lasertec 30 SLM Year of construction: 2018 Condition: as good as new (used)

Table 6000 x 3000 x 400 mm Thickness: 400 mm Length: 6000 mm Large: 3000 mm Weight: 22 ton

Splitter Compact 30t Metre log splitter Motor 5.5KW 400V 50HZ Splitting force max. 30t Max. split material diameter 400 mm Torsion-resistant and particularly tilt-resistant construction with log lifter that erects the heavy trunks Swivelling table for particularly fast work Splits hardwood and softwood up to 1100 mm in length effortlessly and reliably G&SC-5905510902

Key data: 350 mm, 300 mm

Control: Okuma OSP-E100L Travel: X approx. 350 mm. Z: approx. 300 mm, maximum rotary diameter: 400 mm Item No.: 110174 Year of Make: 2004 Equipment: Conveyor Ewag infeed belt -20 positions

Doppstadt DW 3060 D Single-shaft pre-shredder Equipment: MTU R 1100 EUROMOT IV diesel engine, 320 KW Total weight: approx. 25,000 KG 18-channel radio remote control Rear hinge 5.5 m, hydraulically foldable Comb extension Humidification device 21 roll teeth Form C DoppLock quick-change system 20 comb teeth trapezoid Overbelt magnet Hopper Elevation Service Details The machine is in very good technical and visual condition The machine receives a brand-new planetary gearbox before delivery Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects We reserve the right to sell in advance, make changes and repairs.

Manufacturer: Amada Model: LST 3015-M2 Year of Manufacture: 2011 Power Required: 4 kVA Noise Level: 70 dB(A) Weight: 1950 kg Operating Hours: 30,000 hours Pallet Capacity: - Maximum sheet size: 3050 x 1525 x 25 mm - Maximum load: 920 kg Amada 4 kW laser cutting system including shuttle table and extraction system. Operated in single-shift production, no maintenance backlog. Find more here - / Contact us at -

A Bystronic CNC laser cutting system is available. Laser type: ByLaser 4400, laser power: 4400W, wavelength: 10.7µm, working dimensions X/Y: 3000mm/1500mm, cutting dimensions X/Y/Z: 3000mm/1500mm/170mm, positioning speed: 80m/min, simultaneous positioning speed: 113m/min, acceleration: 4.5m/s², positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. workpiece weight: 890kg, max. sheet thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm. Machine dimensions X/Y/Z: approx. 12900mm/6100mm/2100mm, weight: approx. 13500kg, laser hours: 58157h, blower hours: 93930h, pump hours: 10398h. Includes water cooling unit, without extraction. The control was completely renewed in 2025. Documentation available. An on-site inspection is possible.

General SKU205M542 LocationBarneveld MakeApparate- und Behältertechnik Harrislee GmbH TypeTransportbehälter 300L Year of construction1992 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Silo MaterialStainless steel 1.4435 (316L) Silocheck Closedcheck Capacity300 Ltr Diameter800mm Cylindrical height200mm Conical height750mm Outletdia. 150mm Max. temperature130°C. Information Mounted on framecheck Mounted on wheelscheck Floorspace1,3x1,1 m Total height1,5 m Weight100 kg Technical specs Extra informationminus 0,95/3 bar working pressureSilosHarrisleeTanks > SilosBrand > Harrislee What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU347W896 LocationBarneveld MakeLibra TypeSensitive 300A Mach.No.300.91.122 Main Features MaterialStainless steel Motor1 KW Specified Features - Miscellaneous MaterialStainless steel CapacityOutput max 300 pc/min Motor1 kW, 220 volt Information Year of construction1991 Total height2,30 m Floor space1,20x1,05 m Weight420 kg Extra SpecificationsLabeling machine, with roll holder. ajustable height travel 10-120 mm. MiscellaneousIMA ItalyMiscellaneous > MiscellaneousBrand > IMA Italy What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU305U624 LocationBarneveld MakeStarick Fördertechnik GmbH TypeLS3 / BAV1200 No.1821.2694.01.05 Year of construction2005 Pressure Working pressure1 Bar Main Features MaterialStainless steel Volume3000 Ltr. Pressure1 Bar Specified Features - Silo MaterialStainless steel 1.4301 (304) Silocheck Closedcheck Capacity3 m³ Diameter2000 mm Cylindrical height500 mm Conical height1310 Conical bottomcheck Dished topcheck ManholeDN300 InletDN200 Top connectionsDN600, DN500 Outlet with vibro bottomcheck 0,80 kW, 400Volt (EX) OutletDN200 Information Weightca. 500 kg CEcheck Total height4,42 m ATEX compatiblecheck Extra SpecificationsThis silo comes complete with dust filter and rotary valve. SilosStarick Fördertechnik GmbHTanks > SilosBrand > Starick Fördertechnik GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced pric ...

General SKU205M047 LocationBarneveld MakeApparate- und Behältertechnik Harrislee GmbH TypeTransportbehälter 300L Year of construction1992 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Silo MaterialStainless steel 1.4404 (316L) Silo1 Closedcheck Capacity300 Ltr Diameter800mm Cylindrical height200mm Conical height750mm Outletdia. 150mm Max. temperature130 Degr. C. Information Mounted on framecheck Mounted on wheelscheck Floorspace1,3x1,1 M Total height1,5 M Weight100 KG Technical specs Extra informationminus 0,95/3 bar working pressureSilosHarrisleeTanks > SilosBrand > Harrislee What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome t ...

General SKU304M417 LocationBarneveld MakeNIRO A/S TypeCSS ZIG-ZAG 300mm No.080-0101-00 Year of construction1995 Main Features Motor1.35 KW Specified Features - Tumbler mixer Zig-Zag tumbler mixercheck Inlet300 X 185mm OutletDia. 240mm With motor1,35 KW, 400/690 Volt (Ex) Speed mixer26 Rpm With safety gatescheck Information Floorspace2,4 x 1,2 M Total height1,6 M Weight920 KG ATEX compatiblecheckTumbler mixersGEA NiroMixers > Tumbler mixersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU304M416 LocationBarneveld MakeNIRO A/S TypeCSS ZIG-ZAG 300mm No.080-0104-00 Year of construction1996 Main Features Motor1.35 KW Specified Features - Tumbler mixer MaterialStainless steel Zig-Zag tumbler mixercheck InletDia. 160mm / 300 x 185mm OutletDia. 195mm With motorcheck With safety gatescheck Information Floorspace2,4 x 1,2 M Total height1,6 KG Weight860 KGTumbler mixersGEA NiroMixers > Tumbler mixersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU205M548 LocationBarneveld MakeApparate- und Behältertechnik Harrislee GmbH TypeTransportbehälter 300L Year of construction1992 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Silo MaterialStainless steel 1.4435 (316L) Silocheck Closedcheck Capacity300 Ltr Diameter800mm Cylindrical height200mm Conical height750mm Outletdia. 150mm Max. temperature130°C. Information Mounted on framecheck Mounted on wheelscheck Floorspace1,3x1,1 m Total height1,5 m Weight100 kg Technical specs Extra informationminus 0,95/3 bar working pressureSilosHarrisleeTanks > SilosBrand > Harrislee What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU205M546 LocationBarneveld MakeApparate- und Behältertechnik Harrislee GmbH TypeTransportbehälter 300L Year of construction1992 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Silo MaterialStainless steel 1.4435(316L) Silocheck Closedcheck Capacity300 Ltr Diameter800mm Cylindrical height200mm Conical height750mm Outletdia. 150mm Max. temperature130°C. Information Mounted on framecheck Mounted on wheelscheck Floorspace1,3x1,1 m Total height1,5 m Weight100 kg Technical specs Extra informationminus 0,95/3 bar working pressureSilosHarrisleeTanks > SilosBrand > Harrislee What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to  ...

General SKU205M547 LocationBarneveld MakeApparate- und Behältertechnik Harrislee GmbH TypeTransportbehälter 300L Year of construction1992 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Silo MaterialStainless steel 1.4435 (316L) Silocheck Closedcheck Capacity300 Ltr Diameter800mm Cylindrical height200mm Conical height750mm Outletdia. 150mm Max. temperature130°C. Information Mounted on framecheck Mounted on wheelscheck Floorspace1,3x1,1 m Total height1,5 m Weight100 kg Technical specs Extra informationminus 0,95/3 bar working pressureSilosHarrisleeTanks > SilosBrand > Harrislee What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU205M545 LocationBarneveld MakeApparate- und Behältertechnik Harrislee GmbH TypeTransportbehälter 300L Year of construction1992 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Silo MaterialStainless steel 1.4435 (316L) Silocheck Closedcheck Capacity300 Ltr Diameter800mm Cylindrical height200mm Conical height750mm Outletdia. 150mm Max. temperature130°C. Information Mounted on framecheck Mounted on wheelscheck Floorspace1,3x1,1 m Total height1,5 m Weight100 kg Technical specs Extra informationminus 0,95/3 bar working pressureSilosHarrisleeTanks > SilosBrand > Harrislee What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU205M544 LocationBarneveld MakeApparate- und Behältertechnik Harrislee GmbH TypeTransportbehälter 300L Year of construction1992 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Silo MaterialStainless steel 1.4435 (316L) Silocheck Closedcheck Capacity300 Ltr Diameter800mm Cylindrical height200mm Conical height750mm Outletdia. 150mm Max. temperature130°C. Information Mounted on framecheck Mounted on wheelscheck Floorspace1,3x1,1 m Total height1,5 m Weight100 kg Technical specs Extra informationminus 0,95/3 bar working pressureSilosHarrisleeTanks > SilosBrand > Harrislee What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU205M543 LocationBarneveld MakeApparate- und Behältertechnik Harrislee GmbH TypeTransportbehälter 300L Year of construction1992 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Silo MaterialStainless steel 1.4435(316L) Silocheck Closedcheck Capacity300 Ltr Diameter800mm Cylindrical height200mm Conical height750mm Outletdia. 150mm Max. temperature130°C. Information Mounted on framecheck Mounted on wheelscheck Floorspace1,3x1,1 m Total height1,5 m Weight100 kgSilosHarrisleeTanks > SilosBrand > Harrislee What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in ...