128,977 used machines on RESALE, but how to find them? Machine Search
Key data: 3000 mm, 1500 mm, 6000 W
3000 x 1500mm
Labeller Manufacturer: HERMA Type H 300 SL Servo 8 Device No. 990 1109
Key data: 870 mm, 3000 mm
Turning length: 3000 mm Turning diameter: 870 mm above bed 560 mm over cross slide Weight between tips: 3,600 kg without bezel 4,400 kg with 1 bezel 5,600 kg with 2 bezels Spindle speed: 0 - 900 rpm Spindle bore: 162 mm Control: Fagor Equipped with: - Extra jaw chuck on the rear side of the main spindle - 1 fixed bezel Ø420 mm - 1 rotating bezel - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 tool containers - Coolant and chip container at the rear - Machine documents Country of origin: Spain Motor power: 30 kW Machine weight: 9,000 kg Machine LxWxH: 5.1 x 2.4 x 2.0 mtr.
Key data: 300 t, 4300 mm, 3700 mm
Printing capacity: 300 ton Bending length: 4,300 mm Stand width: 3,700 mm Back gauge: 550 mm Stroke length: 300 mm Projection: 450 mm Feed speed: 120 mm/sec. Working speed: 10 mm/sec. Retraction speed: 120 mm/sec. Control: Delem DA65 Equipped with: - Y1, Y2, X&R - Axis Controlled - CNC hydraulic crowning - Various sets of bending tools - Safety light cabinet Lazer Safe - Operating instructions and machine documents Country of origin: Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21,500 kg
Semi-automatic with rotary table Max. Tool dimensions 300 x 500 mm Max. Tool height 120 mm Max. output 16 cycles/min Moulding and sealing possible with one tool Temperature for forming and sealing plate can be set differently Two-hand operation 1 tool set available PLC Omron SYSMAC CPM1 Touch panel Mobile Drive 400V/50Hz
Semi-automatic with rotary table Max. tool dimensions 200 x 400 mm Max. tool height 120 mm Output max. 16 cycles/min Forming and sealing possible with one tool Temperature for forming and sealing plate can be set differently Two-handed operation Without tool set Drive 230V/50Hz
Machine for making plastic sleeves for bottle etc. Sleeve width 20 -200 mm Speed 200 m/min Accessories: 2 containers for solvents, Extraction with blower, Perforation
Semi-automatic machine with rotary table Max. tool dimensions 200 x 400 mm Max. tool height 120 mm Max. output 16 cycles/min Moulding and sealing possible with one tool Temperature can be set differently for moulding and sealing plate Two-hand operation Without tool set Drive 230V/50Hz
Lock cylinders, carriage cylinders, WDS cylinders, holding arms for punching tools, screw S 30/24D, and much more
Inv. Num. : 8399 Type: QRM 300/4 Producer: SMERAL Generated: Parameters: Maximum sheet metal plate width: 300 mm Maximum sheet thickness when cutting: 4 mm Machine weight: 630 kg The straightening apparatus was completely repaired (rollers reground and new electrics).
Travel X/Y/Z: 400mm/300mm/495mm, spindle center table distance: 25mm-325mm, spindle nose table distance: 125mm-620mm, rapid traverse: 24m/min, feed rate: 5m/min, spindle type: ball screw, spindle diameter: 36mm, speed: 6000rpm, spindle power: 5.5kW, spindle mount: BT40. Tool slots: 30, tool change time: 2.5s, clamping time: 7s, max. tool diameter/length: 110mm/250mm, max. tool weight: 8kg. Table dimensions X/Y: 315mm/315mm, table angle: 7.5°, table clamping force: 3400kg, max. workpiece weight: 150kg. Dimensions X/Y: approx. 1900mm/2300mm, weight: approx. 4500kg, control: Fanuc 0-M, operating hours: 732h, piece counter: 172776. Including cooling lubricant system and tool magazine with 30 places. Documentation available. On-site inspection is possible.
Used plastic agglomerator, model GHX 300. New: 2021. Technical data: - Capacity 300 liters, - Recommended feed 200 liters, - Efficiency 220 kg/h (PE / PP PET / PA films), - Automatic or manual water supply, - 75 KW engine, - Installed set of six sets of fixed knives, - Rotating arm with double-sided knives, - Knife material 9 CrSi, - Pneumatic agglomerate discharge with the possibility of setting in automatic or manual mode, - Good condition / Used for only one year.
Sanding length: 700mm, sanding width: 330mm, max. workpiece height: 450mm, table dimensions X/Y: 280mm/600mm, table speed: 25m/min, sanding wheel dimensions: 305mm/25mm/76.2mm, spindle power: 3PS, machine dimensions X/Y/Z: approx. 2100mm/1600mm/2000mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.
A CNC turret punching machine Amada and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, pressing force: 300kN, travel X/Y: 2500mm/1525mm, travel X/Y with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Traversing speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. Turret stations 45, auto-index stations: 2xB/2xC, turret speed: 30rpm, stroke rate: 1000 strokes/min, machine weight: approx. 21000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm-6mm, max. sheet weight per pallet: 3000kg, suction cups: 34, machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation ...
Saw blade dimensions: 3660mm/27mm/0.9mm, cutting range at 90° round material/flat material: 300mm/385mm x 220mm, saw blade speed: 20m-70m/min, saw blade roller diameter: 450mm, power: 1.5kW, machine dimensions X/Y/Z: approx. 220mm/1500mm/1200mm. On-site inspection is possible.
A complete bending line for the production of flange rings is available. Workpiece dimensions X/Y: 440mm/350mm, max. cross-section (S355 NL): 65000mm², max. flat steel length: 22000mm, max. outer ring diameter: 7000mm, max. inner ring diameter: 2320mm, max. ring weight: 11t. 1) Preheating furnace holes, machine dimensions X/Y/Z: approx. 1500mm/500mm/22000mm. 2) Faccin conveyor belt, length: 22000mm. 3) Ring bending machine Faccin Giotto 3000. 4) Flash butt welding machine Asdorfer HY 1500, power: 1500kVA. 5) Faccin handling system, max. ring diameter: 6500mm. Documentation available. On-site inspection is possible.
Max. cutting height: 100mm, saw blade diameter: 250-400mm, bore: 30mm, carriage length: 2600mm, motor power: 5.5kW, length: 3100mm, width: 2400mm, height: 1500mm, weight: 770kg. On-site inspection is possible.
Working width: 3050mm, material thickness: 6mm, throat depth: 200mm, back gauge adjustment: 1000mm, drive power: 15kW, cutting angle range: 1°-2°, table height: 900mm. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2100mm, weight: approx. 8500kg. On-site inspection is possible.
Various woodworking machines from different manufacturers are available. 1) Max Striffler type 2750 double mitre saw, year of manufacture: 1983. 2) Stegherr KSF-V universal cross rung miller, year of manufacture: 1991. 3) Stegherr SDB dowel drilling machine for frame constructions, year of manufacture: 1988. 4) Axel Wirth LW 100.5/300, year of manufacture: 2008. 5) Ruchser RU-EBL2.5-M fitting drilling machine, year of manufacture: 2001. 6) Max Mayer (MAKA) STV 170 oscillating chisel mortising machine, year of manufacture: 1994. 7) Max Mayer (MAKA) STV-71 oscillating chisel mortising machine, year of manufacture: 1987. On-site inspection is possible. The machines are only available as a package.
A CNC CO2 laser cutting machine Amada with automated storage system LKI is available. 1) Laser power: 4kW (4000W), travel X/Y/Z: 3100mm/1550mm/100mm, max. table load: 920kg, max. material thickness steel/stainless steel/aluminum: 20mm/12mm/10mm, laser system dimensions X/Y/Z: approx. 10000mm/4300mm/2100mm, weight: approx. 11000kg. 2) Pallets: 8, cutting pallets: 2, raw material: 2/3, unloading: 4/3, max. unloading height: 2200mm, max. material dimensions X/Y: 3050mm/1525mm, min. sheet dimensions: 2000mm/1000mm, height: 5400mm. Documentation available. On-site inspection is possible.
Load: 335mm: 3000kg, 450mm: 2400kg, 660mm: 1900kg, 825mm: 1600kg, 1110mm: 1200kg, max. turning diameter at 90°: 1600mm, speed: 1.2rpm, tilting time to 135°: 30s, gearbox: Boehringer Sturm, gearbox type: 2DA 11 oil gearbox. On-site inspection is possible.
Working area X/Y/Z: 3000mm/1500mm/115mm, laser power: 3200W (3,2kW), laser type: Trumpf Trumatic TC L 3020, max. material thickness steel: 20mm, cutting heads: 2x. Machine dimensions X/Y/Z: approx. 4600mm/9300mm/2000mm, weight: approx. 10500kg, laser hours: 56738h, beam hours: 26243h. Including cooling circuit filter unit Riedel and pallet changer. The door of the machine has an error in the acknowledgement. This can be easily solved by pressing the acknowledgement button and the cancel button. Documentation available. On-site inspection is possible.
A welding cell including robot and welding machine is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5250h, operating hours: 1244h. 1) Robot Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, max. reach: 1373mm, repeat accuracy: +/-0.08mm, weight: approx. 238kg. 2) Welding machine Fronius Magic Wave 4000, year of manufacture: 2006. On-site inspection is possible.
: 2009 current intensivity: 300 A wire dia.: 1 mm : sofort einsatzbereit : 239836 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Prima Power CO2 laser cutting system is available. 1) Prima Power Platino 1530, year of manufacture: 2011, travel X/Y/Z: 3000mm/1500mm/150mm, rapid traverse: 100m/min, position accuracy: 0.03mm. 2) Prima Power CP 3000, year of manufacture: 2010, laser power: 3000W, power stability: +/- 2%, wavelength: 10.6µm, laser diameter: 19mm, dimensions X/Y/Z: approx. 900mm/3100mm/900mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Available from Q1 2025.
A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible.
: 2 turning diameter: max. 250 mm toll turrets: 2 x 12 control: Fanuc 16 T tool taper: HSK 63 : 04800000181 frequency: 50 Hz ampere: 168 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Groove width range: 2mm-32mm, max. ram stroke: 300mm, stroke rate: 300 strokes/min, max. installation height: 450mm, feed: 0.01mm-0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control: fk electronic Dialog CNC. On-site inspection is possible.
: . Number of working hours: 275 h : . quick coupler: MS 01 Guarantee: noch 11 Monate weight: 1087 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Panasonic laser marking machine (laser marking station) with a defective laser head is available. Travel X/Y/Z: 500mm/430mm/350mm, marking range X/Y/Z: 720mm/430mm/350mm, machine dimensions X/Y: approx. 800mm/1900mm. Documentation available. On-site inspection is possible.
grinding wheel diameter: 300 mm table length: 0 mm table width: 0 mm total power requirement: 1,5 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: - mm saw band length: - mm table height: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Guide channel sets for diameters: 22, 42, 47, 52, 62, 67, connected load: 2.4 kVA, weight: 1.8 tonnes. Featuring short changeover times, easy handling, maximum running smoothness, hydrodynamic bearings, 360° closed guide channels, reliable feeding of rotationally symmetrical profile material. The machine has only been used a little, an on-site inspection is possible.
max. grinding diameter: - mm grinding length: - mm workpiece length: - mm Control: total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible.
max. wheel diameter: 330 mm gear width: 180 mm max. module: 7 min. module: 0,5 total power requirement: 12 kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible.
hobbing length: 2100 mm milling width: 300 mm max. module: 16/18 min. module: total power requirement: 10 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Transport length: 2000 mm band width: 250 mm dayligth: 250 mm width: 410 mm 0: 900 mm total power requirement: kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 3x0,5x1,5 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A centerless cylindrical grinding machine König & Bauer (Koebau) is available. Grinding wheel width: 300mm, max. grinding diameter: 200mm, grinding wheel bore: 305mm. Control wheel width: 300mm, control wheel bore: 127mm, speed: 85rpm, max. workpiece length (plunge grinding): 300mm. Machine dimensions X/Y/Z: approx. 3150mm/2100mm/1850mm, weight: approx. 6000kg. On-site inspection is possible.
capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350 x 200 saw band length: 3375 x 27 x 0,9 mm band speed: 37 + 74 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,61 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 320 mm threading length: 300 mm thread pitch: mm total power requirement: 90 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: m Thread and worm grinder for steering worms The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Load Weight Shelf: 20000 kg Loading weight per level: 2000 kg Number of load levels: 2 x 5 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Load Weight Shelf: 28000 kg Loading weight per level: 2000 kg Number of load levels: 2 x 7 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: 3,7 x 2,55 x 2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
hobbing length: 1750 mm milling width: 260 mm max. module: 10 min. module: 12 total power requirement: 8 kW weight of the machine ca.: 4500 kg dimensions of the machine ca.: m D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Model UZFM – V 300 H Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 ...
turning diameter: 300 mm turning length: 710 mm control: SIEMENS SINUMERIC 840 total power requirement: 40 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: m I N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____________________________________________________________ Turning - Ø, with chuck, max. 300 mm Spindle bore 90 mm Max. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Quickfeed 0,1 - 20 m/Min. Feed Force of X/Z-Axis 8 – 13 kN Steplessly a ...
: 3000 mm Working width: 360 mm Wheel width: 360 mm roll diameter: 60 mm : 900 kg height adjustment: 650 - 1100 mm weight of the machine ca.: 0,050 t dimensions: 3,1 x 0,45 x 0,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 300 mm table length: 0 mm table width: mm total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: m Cut-Off Machine for Hard Materials, Coolant, Hand Lever11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 350 mm gear width: 350 mm max. module: 8 min. module: total power requirement: 7,5 - 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Gear hobber with gear shaping device, 2-cut cycle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
