hook lift 30 used for sale

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Venjakab, belt conveyor on solid base frame, without drive -Webbing: Type H 6.5 m -Belt width: 1985 mm -Conveyor length: 3 m -Transport dimensions: 3060/2430/H940 mm -Weight: 740 kg

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool -Die tool: Forming tool / Press tool -Length: 300 mm -Dimensions: see photos -Overall dimensions: 300/80/H110 mm -Weight: 17.9 kg

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage, electric carriage, linear carriage -Manufacturer: Afag, linear slide electric slide -Type: ES30-300 -Stroke: 300 mm -Shaft: Ø 20 mm -Dimensions: 525/60/120 mm -Weight: 5.8 kg

Perforationswerkzeug - Perforation tool Tränklein 30589 Year 2015 - Serial-No. 30589 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

- Banding machine - desk model

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ 2-304 -Length: 8.5 m -Connector: 5-pin -Transport dimensions: 580/450/H130 mm -Weight: 7.1 kg

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 228 mm -Type: D TB 90-8M-50 -Number of teeth: 90 teeth / Belt width: 50 mm -Mount: Taper clamping bushing 3020-40 / Ø 40 x 50.8 mm -Dimensions: Ø 228 x 60 mm -Weight: 12 kg

Kran für Sammelhefteranleger - Crane for Saddle Stitcher Feeders Müller Martini 3.060.054 Payload maximum 300 KG Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Ready-mix Concrete Plant, Concrete Mixing Plant Used Tower complex make Krupp Year of construction 1969 – Control engineering originally by Pfister Waagen Augsburg -Control currently from Dorner Electronic Complete system consisting of: Main tower steel structure by Krupp Multi-chamber silo 1 control room 1 Mixer THZ 3000 (Teka) Year of production 1980 Control engineering originally by Pfister Waagen Augsburg 1 mixer approx. THZ 1500 or THZ 2250 1 Single component silo with screw conveyor on steel frame 4-component silos with screw conveyors on steel frame 1 Sand Filling Elevator 1 steam boiler 1 Residual concrete preparation ( washing screw ) Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Kreuzleger - Stacker CMC ROBOT 300 PMC Year 1994 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Industrial vacuum cleaner Brand: Nilfisk, model: T305, motor: 3 Kw (4 hp), year: 2019.

Water pump Manufacturer: KSB 30KW Q=70.00 m3 H=90.20 The part is in good condition, Nevertheless, this is a used items, that shows or may show signs of wear. For more details, see pictures.

Square, locksmithsquare, hair square, precision hair square -Angle angle: Leg length 300 x 180 mm -Quantity: 1x angle stop available -Dimensions: 305/180/H20 mm -Weight: 0.6 kg

Angle bracket, locksmithsquare, flat angle -Flat angle: Leg length 300 x 200 mm -Quantity: 1x flat angle available -Dimensions: 300/200/H5 mm -Weight: 0.7 kg

Nema Corrosion Test Chamber for Salt Spray Tests Manufacturer: Nema Type: NSN 300 Nominal voltage: 400 V Rated current: 11 A Compressed air: 8-10 bar Air consumption: 6 Nm³/h Humidifier: 0.5 l/h Water pressure: 2-8 bar Power consumption: 5.6 kW Brine: NaCl: 50 +- 5.6 kW External dimensions (WxDxH) 3200 x 1200 x 1900 mm Internal dimensions of the test chamber (WxDxH) 3100 x 1000 x 880 mm Weight: 390 kg More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Sauer Sundstrand, hydraulic unit from Atlantic ATS 3006 guillotine shear -Hydraulic pump: double version -Motor: EMI 7.5 kW / 1440 rpm -Dimensions: 790/330/H295 mm -Weight: 83.6 kg

We currently offer: Iveco generator set Type: G.E. 8210 SRI 26.01 Generator Stamford Type: HC. 434E1 Power: 300 KVA Hz 50 RPM 1500 AVR Control: MX 341 IP 22 Built in 1993 We estimate operating hours to be less than 500 hours Metrics: L: 3.20m B: 1.20m H: 2.10m You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders, compact cylinders -Manufacturer: SMC, Compact cylinder type ECDQ2A80-300DC -Stroke: 300 mm -Piston rod: Ø 25 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 420/100/H140 mm -Weight 5.7 kg/pc.

Key data: 240 KW, 300 kVA

We currently offer: Number 25 Himoinsa generator set Type: GP0. EST Engine Iveco Type: 544706 Power 240 KW / 300 KVA Built in 1999 Hours: 13885 dB 97 Metrics L: 4.10 m B: 1.60 m H: 2.00 m Runs einweindfrei You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Flange connection, V-flange, pipe flange, stainless steel flange, safety breakaway coupling -Pipe flange: Stainless steel flange -Type: HG/T20592-2009 PL200 PN10 304 -Diameter: Inside 213 mm -Bolt circle: Ø 295 x 22 mm -Dimensions: Ø 340 x 265 mm -Weight: 26.1 kg

Tow hitch, trailer coupling, jaw coupling -Manufacturer: AL-KO, axle braked -Type: B 2000-4 -Brake: Type 3081 A -Brake drum: Ø 325 mm Recess Ø 160 mm / Bolt circle Ø 205 mm -Dimensions: see photos -Transport dimensions: 1750/660/H340 mm -Weight: 134 kg

Turning diameter 410mm Turning length of 1000mm CE certification proves the best possible safety Complete series in above-ground construction Speed up to 3000rpm Center width 1000mm Turning Ø over bed 410mm Turning Ø over support 255mm Hbcfxifg Turn Ø in Bridge ----- Speed/Steps 50-3000 rpm / Stepless Tailstock mount MK 4 Feed longitudinal 0.025-085mm/rev Feed transverse 0.05-1.7mm/rev Motor 5.5KW

Display, display module, display panel, multifunction counter, controller, bidirectional counter, preset counter, digital counter -Manufacturer: IVO, Multifunction Digital Counter with 6-digit LED Display -Type: N 214.002AX01 -Item No.: 300949 -Dimensions: 130/110/H50 mm -Weight: 0.4 kg

Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Manufacturer: Allgaier, manual spindle press -Insertion height: 345 mm -Column clearance: 300 mm -Table width: 300 mm / Bore Ø 60 mm -Spindle mount: Ø 40 mm -Dimensions: Ø 1420 x 1780 mm -Weight: 277 kg

Workspace Workpiece, weight (max.) 270 kg Distance spindle nose - table surface 580 mm Table dimensions 635 mm x 305 mm Dimensions magnetic clamping plate 600 mm x 300 mm Scale ring pitch Y-axis 0.005 mm Scale ring pitch Z-axis 0.02 mm Auto. Transverse Feed Z-Axis 0.1 mm - 8 mm Speed 1450 1/min Auto. Vertical feed 0.005 mm - 0.05 mm Travel X-axis travel 765 mm Y-axis travel 340 mm Feed hydr. Feed X-axis 7 m/min - 23 m/min Rapid traverse Y-axis 480 mm/min Rapid traverse Z-axis 990 mm/min Drive power Motor power main drive 4 kW Dimensions and weights Grinding wheel dimensions 350 mm x 40 mm x 127 mm Dimensions (length x width x height): 2.9 m x 2.2 m x 1.9 m Weight 2800 kg

Used homogenizing mixer manufactured by UCR (PL), model M 300. The mixer is designed for making creams, pastes, emulsions, ointments and other substances in the fields of cosmetic, pharmaceutical, food and chemical industries. The mixer is equipped with a vat with a working volume of 250 liters, made of acid-resistant steel. The vat has a heating jacket and insulation. An additional loading opening is located on the lid and is equipped with a hopper for feeding additives during mixing. The lid is hydraulically lifted. Technical data: -Power supply 380V -Installed power 21kW/27kW -Heating temperature range 20°C + 90°C -Pressure from 0 to + 0.6 bar. -High of mixer with raised lid 3120 mm. -Height of mixer when lid is down 2100 mm -Width 1260 mm -Length 1750 mm -Mass approx. 1800 kg Tank: -Working capacity 250 L -Total capacity 300 L Wall-anchor agitator: -Mixer s ...

Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial.-No.: 637 Contact length, effective: 1600 mm Pad width: 180 mm Design: smooth pads at the bottom and top Haul-off force: approx. 20,000 N Hail-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.

Camera, hand button with display Max. gauge length 10000/3500/3500 mm Certified measuring range 3000/1500/1500 mm Triple camera Integrated probe camera Measurement accuracy ±(28 + 5 L/1000) μm Repeatability ±10 μm

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

Inv. Num. : 8070 Type: Multiturn 3000 Producer: Colchester Created: 2005 Parameters: Control system: FANUC Maximum turning diameter over bed: 460 mm Maximum turning diameter over support: 270 mm Spindle diameter: 78 mm Motor power: 11 kW Maximum spindle speed: 2250 1/min Travel X: 296 mm Travel Z: 1530 mm Equipment: Owner Vacuum

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts

tapered roller bearings -Outer diameter: 80 mm -Width: 18 mm -Inner diameter: 40 mm -Weight: 0.5 kg

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 90 mm -Outer diameter: 160 mm -Width: 32.5 mm

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 45 mm -Outer diameter: 85 mm -Width: 20.75 mm

Key data: 4 mm, 40 mm

Edge banding machine with joining milling machine (incl. DIA tool), with PLC control (incl. touchscreen) with hot-melt adhesive specification on the workpiece for edge material up to 3 mm: maintenance-free, coated glue basin with alternating tank preparation, HF cross-cut sawing station (approx. 16,000 rpm) for front and rear edge protrusion, HF milling station (approx. 16,000 rpm)with interchangeable plate milling cutter (combination design), Fine adjustment of the milling machine from the operator's side (Hebrock system), Corner round milling machine (minimum workpiece length 300 mm, Hoa0Tgpbz max. workpiece thickness 40mm), surface scraper blade incl. pneumatic excavation, robust chain drive, Double roller top pressure, aggregate viewing window of Machine rear and operator side, extendable Workpiece support, feed rate approx. 10 m/min., workpiece thickness 60 mm, incl. 1x al ...

Pressure filler Krones Mecafill type: VK2V K126-308 with 96 filling valves and 18head crowner with short filling tubes with double pre-evacuation with HDE (hot water injection) complete reconditioned in 2009 by company Krones clockwise direction - from left to right capacity: approx. 35.000 bph by 300 ml softdrinks products: beer, alcohol free beer, long drinks, cocktails, cider, softdrinks, carbonized water, still water with Siemens S7-300 PLC and HMI touchpanel including all available spare parts The filler is still in production until September 2025 and can be inspected during procduction

tapered roller bearings -Weight: 7250 g -Outer diameter: 230 mm -Width: 40 mm -Inner diameter: 130 mm

Collator tb sprint B 312 VP 12 Station variable pile up to 30 cm formats: max. 35 x 65 cm, min. 6.5 x 10 cm paper weights: 20 to 1000 g/m² speed: up to 3300 cycles/h current: standard 400 V, 50 Hz, 3/N/PE additional equipment: • single sucker- and -blower valves, individually adjustable • controlled blast and separating air • missed sheet detector, photo electric, each station • double sheet detector electromechanical at the delivery • paper jam detector over transport table • lighting of transport table • hand feeding station right • delivery jogger for normal- and criss-cross-delivery, selectable by switch • total- and preselection batch counter • SPS programme control with - Touch Screen - missed sheet repeat without machine stop with the next cycle - ejector, faulty sets are separated while running, max. set thickness 4 mm - programmable, au ...

tapered roller bearings -Weight: 3780 g -Outer diameter: 180 mm -Width: 34 mm -Inner diameter: 100 mm

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Piston tube outer diameter: Ø 135 mm -Stroke: 300 mm -Weight: 52 kg

Key data: 3000 mm, 3 mm

Max. bending length: 3000 mm Max. sheet thickness: 3 mm steel Manual backgauge Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam variable Bending rail ground Operating instructions Weight: approx. 5,000 kg

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

mobile welding fume filters, welding fume extraction -portable -Extraction port: 1 -Drive: 1 kW -Volume flow rate: max. 170 m³/h -Quantity: 1 available -Weight: 20 kg

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg

Technical data of the pallet rack crossbar: Shelving system: Arestant Type: NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: orange Box profile: 100 x 50 mm Truss Type: 10515CN Agraffe: 4 HK (hooks) Clear width: 3,300 mm max. load per pair of trusses 1,500 kg, with the same. distributed load. ( Observe field load ) 02x Safety pins, new Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

SPECIFICATIONS: Installed power: 18.5 kW Inlet width: 300 mm Inlet height: 200 mm Rotor: Ø 252 mm Intake manifold: Ø 200 mm For the shredding of the following wood waste: - MDF strips - Pressed chipboard -Plywood -Cardboard EQUIPMENT: Motorized carpet: 11000 x 330 mm

DAEWOO PUMA 300 LB (Doosan), 2-axis CNC lathe, CNC Fanuc 18T, Hydraulic tailstock, Condition: very good. This machine can be inspected in our warehouse, under power., Mimu machine tools Italy

table length: 3000 mm table width: 3000 mm table load: 25 t total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg