hook lift 30 used for sale

Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare  ...

Round table, round dividing table, dividing head, dividing head -Table: Ø 300 mm -Bore center: Ø 62 mm -Height: 115 mm -Groove: 16 mm -Dimensions: 460/420/H115 mm -Weight: 61 kg

Offer 23293 Specifications: - Printing capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - Infinitely adjustable stroke 0 to 28 mm - Stroke rate 26 to 36 1/min - Projection 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - Weight approx. 1300 kg - With: - Foot switch - Grain detection device, - Support table with foldable stops W 1100 x D 850mm - Sliding paths of the stops from the center of the punch - Width between Li and Re approx. 470 mm x D 510 mm

Overhauls gearbox Reduction 4,950 : 1 Input shaft counterclockwise Output shaft counterclockwise

• Single rotary press with 47 punch stations • Tool type EU 19 with BBS dies (die diam. 22 mm) • Unkeyed turret • Output 28,200 - 282,000 sheets/hour • Pressing force max. 80 kN, pre-pressing force max. 20 kN • Tablet-diam. max. 13 mm • Tablet height max. 8.5 mm • Filling depth max. 18 mm depending on filling curve (filling curve 10 mm fitted) • Filling hopper with flange for docking Bohle container MCG500/900 for powder feeding • Agitator blade filling shoe (Fill-o-matic) for fine powder materials (1 spare filling shoe available) • Fast diverter for missing tablets • Korsch PHK2i Plus press force control system • Touch screen Siemens, software operating system Windows CE • PLC Siemens S7-400 • Existing tool set 2x 47 pieces for tablet-diam. 9 mm, flat/flat with facet • Drive 400V/50Hz • New cabling between control cabinet and machine (wi ...

pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm Control: CYBELEC VisiTouch Pac stroke of ram: 524 mm weight of the machine ca.: 17.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tumbler Glass Dimensions: 80x100x160cm Electric power: 5kW Volume: 300 liters

Electric chain hoist, crane, indoor crane, assembly crane, electric lift, chain bag chain hoist -Chain bag: for crane chain hoist -Dimensions: 720/300/280 mm -Weight: 6.3 kg

Wire feed case for inert gas welding device, shielding gas device, wire feed case -Manufacturer: Ess wire feed case, water-cooled -Type: DVK 300-3 -Accessories: hose package -Dimensions: 750/410/H430 mm -Weight: 32 kg

Alignment ruler, alignment rail, steel ruler -Angle: 90° -Dimensions: 3000/100/H15 mm -Weight: 28 kg

Cable duct, cable tray, cable channel, cable route, cable profile, protective conduit, protective profile -Cable duct: 61 pieces -Dimensions: 3000 x 50 x 37 mm -Material: Steel, galvanized -Price: complete -Dimensions: 3000/820/H120 mm -Weight: 212 kg

IMAC Plasma Cutter Working range 3000x1500 Workable thickness 15/20 mm. complete with vacuum cleaner Updated Software CD

Blister packaging line, consisting of: Thermoforming blister machine Mediseal CP 400 and folding box cartoning machine Mediseal P 3000, incl. new PLC, operator terminal (HMI) and servocontroller: Thermoforming blister machine CP 400: • Set up for PVC/ALU film (conversion to ALU/ALU possible at extra cost) • Output thermoforming station max. 50-60 cycles/min depending on blister format • Output punching station max. 400 blisters/min depending on blister format • Foil width max. 160 mm • Roll diam. max. 500 mm, core diam. 70-76 mm • 2 roll holders for thermoforming film with film spreader and gluing device for roll change during operation • Pull-off length in thermoforming range 140-220 mm • Drawing depth PVC max. 12 mm • Drawing depth ALU max. 9.5 mm • Feeding: directional tablet feed with spiral conveyor and alternatively brush box (without format parts) ...

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg

Alfa Laval UVPX 307 AGT 14 Separator Centrifuge Oil Fish, Olives 5750l/h Motor 5.5 kW

Wire electrode, welding wire, welding wire -Manufacturer: Bohler, started roll of MAG wire electrode -Type: DT 1.4829 AWS: ER 309 Ø 1.2 mm -Dimension: Ø 300/100 mm -Weight roll: 12.8 kg

Cup grinder, swivel arm grinder, carbide chipbreaker groove grinder, tool grinder, grinder, angle grinder, lathe tool grinder -Grinding head: swiveling -Clamping table: 410 x 410 mm -Magnetic disk Hitachi: 470 x 160 mm -Abrasive tool diameter: 90 mm -Dimensions: 1440/760/H1745 mm -Weight: 712 kg

Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool for: Press brake -Dimensions: 3000/30/H116 mm -Weight: 48 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA61240-0300 -Stroke: 300 mm -Piston diameter: 63 mm -Piston rod: 20 mm -Dimensions: 510/65/H65 mm -Weight: 3.5 kg

6000w TruDisc 3000 x 1500mm Big specification

Machine vice, sturdy vice, drill press vice -Jaw width: 250/80 mm -Clamping depth: max. 300 mm -Dimensions: 610/250/H165 mm -Weight: 84 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Manufacturer: Beckhoff, position control type E300 -Connection sockets: only with plug, cable separated -Dimensions: 600/400 / H200 mm -Weight: 18.1 kg

wire electrode, welding wire, welding wire -Manufacturer: Elga, started roll of inert gas wire electrode -Type: Cromacore DW-309L O1.2mm -Dimension: O 300 /105 mm -Weight roll: 5 kg

dmp Sondermaschinenbau type ORL-300 orientator for plastic bottles, bottles where the caps are not in the correct position to the position of the labels are turned by 180° before being delivered to the next machin, capacity 120 bottles per minute, electrics 3+N+PE 400V/50Hz/16A, power consumption approx. 1,1 kVA, compressed air max. 6 bar, machine floor space approx. 1200 x 1050 mm (LxW), machine height approx. 2100 mm, machine net weight approx. 200 kg

Measuring device, measuring device, measuring machine, -Manufacturer: Fagor, position measuring system -Type: R NCT 13-005 3071 11A -Measuring scale: up to 2030 mm -Glass scale: 2070 mm -Dimensions: 3390/355 / H230 mm -Weight: 123 kg

Wire electrode, welding wire, welding wire -Manufacturer: Tetra, welding wire V 309 LG -Thickness: Ø 1.2 mm -Dimensions: Ø 300/100 mm -Weight of roller: 12 kg

turn - diameter over facing slide: 450 mm turning diameter over bed: 830 mm turning diameter: mm turning length: 3000 mm control: Siemens total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pfeiffer Vacuum Hicube 300 brand new, in stock. 12 months warranty.

Stick electrodes 3.25 x 350 -Manufacturer: Avesta -Type: 309L Ø 3.25 x 350 mm -Dimensions: 375/65/H65 mm -Weight: 4.3 kg

TIG welding rod, welding wire -Manufacturer: Avesta -Type: 307 Si Ø 1.6 x 1000 mm -Mat.nr.: 1.4370 W 18 8 Mn -Package dimensions: Ø 42 x 1010 mm -Weight: 5.2 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Gate valve: MAW type NW 40/32 ND 40 -Valve drive: Leibfried type LDA 309-1 pneumatic -Nominal pressure: 7 bar -Connection: inside Ø 40 mm -Dimensions: 375/150/H195 mm -Weight: 14 kg

Key data: 3050 mm, 1200 mm, 120 mm

Technical version: Console table 3050 x 1200 mm with manually movable 6 brackets, 2 vacuum cups per console and a pneumatic excavation rail Spot laser set-up aid, vacuum pump CNC control XILOG Plus Main spindle 7.5 kW HSK 63F with C-axis, 1500 – 24,000 rpm Tool changer plate 10-fold 1 adapter unit swivel saw Drill head with: 12 vertical spindles, 4+2 horizontal spindles, groove saw Installation dimensions: 6800 x 3040 mm Weight: 2850 kg

Solenoid valve, directional valve, valve terminal, pump preload valve -Manufacturer: Rexroth, pump preload valve for the SYDFE control system -Type: SYDZ 001-13/300V028M -Dimensions: Ø 75 x 120 mm -Weight: 2.9 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller -MOD: 1/11919-002 -Art.: 234500-14530 - Quantity: 1 piece -Dimensions: 390/105/H325 mm -Weight: 8.2kg

Brand: Zerma, model: GSL 300/800, motor: 18 Kw (25 hp), stepped rotor, year: 2003. With electrical panel and vacuum cleaner: 2.2 Kw (3 hp).

Wire electrode, welding wire, welding wire -Material: stainless steel -Shielded gas wire electrode: started roll -Type: 318 Ø 1.00 mm -Dimensions: Ø 300 / 105 mm -Weight roll: 13.8 kg

Wire electrode, welding wire, welding wire -Manufacturer: Metallit, shielding gas wire electrode -Type: 308LSI Ø 0.8 mm -Price: per piece -Quantity: 2 pieces -Dimensions: Ø 300/100 mm -Weight per roll: 15 kg/piece

CNC lathe LB 3000 EX II Manufacturer: Okuma Corporation Year: 2017 Control OKUMA ... OSP-P300LA Turning diameter... 580mm Rotation length ... 950mm Inclined bed Axis Y... 120mm Spindle bore ... 91mm Tool turret ... 12/12 Axis X ... 260mm Axis Z ... 510mm Spindle speed... 0-5000/min. Rapid traverse of the X axis ... 25m/min Rapid traverse of the Z axis... 30m/min Rapid traverse of the Y axis ... 12.5m/min Axis C ... 360° Main engine power... 22kW L x W x H ... 3420 x 2041x 2444 mm Machine weight ... 6600kg The machine is in good condition, possible to test under electricity.

Key data: 610 mm, 1080 mm

Stock number: 3860 CNC LATHE Manufacturer: Mazak , Type: Integrex 300 II SY Year of construction: 2002 Specifications: Max. circumferential diameter 610 mm dia. Max. turn. About Bed 610 mm Dia. Turning length 1080 mm Main motor power 26 kw Main spindle speed range 35-3500 rpm Spindle bore 65 mm dia. C axis - main spindle movement 0.001 degrees X axis movement 580 mm Z Ash Movement 1137 mm Y axis +/- 115mm mm B Axis Movement -30° to +195° Degree B axis spindle speed 10,000 per/min B axis spindles effect 15 B axis tool system KM 63 Z Aksen rapid traverse 30 m/min Counter spindle C Axis - Counter Pindle Movement 0.001 Degree Motor Power Counter Spindle 22 Kw Control Mazatrol PC-Fusion 640MT Fabr. Spindle operating hours 6483 hours Accessories: ATC Tool magazine with 80 stations Miscellaneous tools Cooling by spindle  ...

Type CK-3000B Height of working table 800mm Working depth 80mm Working length 2500mm Motion controller Loran Max traveling speed 150m/min Max working speed 105m/min Control system TPR Spindle power 2x 2.2 kW Spindle speed 0-18000 rpm Transducer Jiale Air pressure 0.6-0.8 Mpa Motors power 750+750+400W Transport dimensions 4200x1700x1400mm Weight 900KG Price 6499 Eur (EXW Jonava, Lithuania)

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 300 mm -Reference: Short cone 8 (139.8 mm) -Dimensions: Ø 300 x 100 mm -Weight: 14 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Price: per piece -Number: 2 pieces -Dimensions: 345/65/H65 mm -Weight: 2.05 kg/piece

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Fuchs: EKW 46 K/5 KE -Outer diameter: 300 mm -Width: 13 mm -Inside diameter: 100 mm -Price: per piece -Number: 4 pieces -Weight: 1.9 kg

Stock number: 3845 CNC BED MILLING MACHINE Manufacturer: CME , Type: MB-3000 FLEX Reconditioned spindle Year of construction: 2006 Specifications: Spindle speeds 2200 rpm Boring Spindle dia. 150 mm

3000 B CNC circular saw blade grinding machine was built in 2023 in Poland. The brand-new machine, equipped with intuitive software and a CNC controller with memory for 128 programmes, is used to sharpen the following types of circular saws, mainly used in the furniture industry for cutting laminated chipboard: – flat circular saws (GM) – alternately mitre circular saws (GS) – trapezoidal circular saws (GB) – trapezoidal-flat circular saws (GA) The 3000 B CNC circular saw sharpener allows for grinding tooth rake angles and tooth face angles in a single pass without removing the saw blade. The grinding wheel arrives at the tooth plane at two feed speeds – the slower feed increases grinding precision, while the faster one reduces sharpening time by up to half. To ensure precise feeding of the tooth under the grinding wheel, a claw feeder is used, which prevents the grindin ...

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Fuchs: EKW 46 K/5 KE -Outer diameter: 300 mm -Width: 10 mm -Inside diameter: 100 mm -Price: per piece -Number: 2 pieces -Weight: 1.4 kg

Bowl cutter Kilia 50l 3000 RS Express 50 liter stainless steel bowl Operation via push button 2 knife speeds 2 bowl speeds Mixing speed forwards and backwards 6 pcs. knife head 3 pcs. knife head Rated power 15 kW, total rated current 33 A Operating voltage 380 V / 50 Hz Weight approx. 950 kg

Ref. No.: 850162 Item No.: 40219 F. Nr: 193 Connection: 380 V /50 Hz

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 300 mm -Width: 40 mm -Interior diameter: 51 mm -Weight: 6.2 kg

Measuring transducers, power measuring transducers, real power measuring transducers -Manufacturer: Muller Ziegler, transmitter -Type: Pdr-MU 30 kV/100 V 50 Hz 150/1 A 500-0-7500 kW -Price: per piece -Number: 2 pieces -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece