honda used for sale

Gas mixer from Honeywell for sale, incl. gas test certificate and original packaging.

Honda WP30 HK: The Powerhouse for Height Differences, , Looking for the ultimate 3-inch water pump for challenging locations? The Honda WP30 HK (High Head) is specifically built for professionals who need to move water over long distances or significant elevation changes., , The Benefits:, Extreme Head: Designed for situations where standard pumps fall short (e.g., slopes, deep wells)., , Reliable Honda GX engine: Starts every time and delivers the consistent power you need, without compromise., , Durable Construction: With a cast iron impeller and robust frame, this pump is built to last., , Applications:, Quickly drain construction pits., Long-distance water supply for irrigation., Reliable emergency pump in case of flooding., , Technical Details:, Engine: Honda GX series, Maximum head: 30 meters, Maximum suction head: 7-8 meters, Inlet/outlet diameter: 3 inches (80 mm), Pump type: Cen ...

HONDA generator set 9 kVA - NEW Soundproofed - Stage V emission standard - - - - - Engine: - Honda - Model: GX390 - 1 cylinder - Gasoline - Air-cooled - Displacement: 389 cc - - - - - Generator: - Manufacturer: NSM (Italy) - 7.7 / 8.5 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hertz - AVR regulator - - - - - Starting unit / control unit: - Ignition lock for starting and stopping - ATS interface, for easy plugging in of an ATS automatic start box - Hour meter - 1x 400V 16A socket - 2x 230V socket - - - - - Equipment: - AVR voltage regulator (so sensitive devices can also be operated) - Electric start - Oil pressure sensor - Overload protection - Automatic start interface (ATS connection) for easy plugging in / retrofitting of an automatic start box - Stage V emission standard: The device can therefore also be used for mobile application ...

Honda Emergency Power Generator 8 kVA - NEW with E-start, AVR ESC, 45 litre tank - - - - - Engine - Honda GX390 - 1 cylinder - Air-cooled - - - - - Generator - Manufacturer: NSM, Italy - Power: 7.7 / 8 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hz. - - - - - Start System - Electric starter via ignition lock - Start by cable pull also possible - - - - - Facilities - Large 45 liter tank - AVR regulator (for exact voltage compliance) - Electric start - Oil level sensor - Overload protection - Sockets: 1x 230 V, 1x 400V 16A - - - - - Additional equipment (optionally orderable) - Wheelset + push rods - Service kit for initial maintenance - 2.5 mtr. Flexible exhaust hose - - - - - Other data: - Dimensions: 79 x 58 x 65 cm - Weight: 99 kg - Consumption: approx. 2.0 ltr. (50%) / 2.7 ltr. (75%) - - - - - Shipping: - Germany-wi ...

Honda Emergency Power Generator 7 / 8 kVA NEW with E-start and AVR controller - - - - - Engine - Honda GX390 - 1 cylinder - Air-cooled - 389 cc - - - - - Generator - Power: 7 / 7.7 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hz. - AVR regulator - - - - - Start System - Electric start via ignition lock - Start by cable pull also possible - - - - - Facilities - Electric start - AVR regulator (for exact voltage compliance) - Sockets: 1x 230 V, 1x 400V 16A - - - - - Additional equipment (optional for an extra charge) - Wheel set + push bars: 120 € net - - - - - Other data: - Dimensions: 79 x 57 x 68 cm - Weight: 101 kg - Consumption: approx. 1.5 ltr. (50%) / 2.1 ltr. (75%) - - - - - Shipping: - Germany-wide transport including unloading is possible for an extra charge - To be able to quote an exact freight price, please sen ...

Ground precision ball screw, 990393, D63x10/8, 1290mm, Honsberg, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 990393, D63x10/8, Fa, Honsberg, Ball screw diameter 63 mm, Pitch 10 mm, Length of thread 985 mm Length of ball screw nut 168 mm, Max. total stroke 817 mm, Total length of the spindle 1290 mm Diameter for coupling with motor 40 mm Diameter bearing seat A 45 mm, Diameter bearing seat B 54 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a f ...

Ground precision ball screw, 80270, D50mm, 1300mm, Honsberg, new As good as new in original packaging! The high-quality part comes from a spare parts warehouse of a mechanical processing of a large automobile manufacturer, is completely new and in the original packaging. Attention: We have many, bearing, high-quality ball screws in different designs in diameters 32, 40, 50, 63 and 83mm. Take a look at our website of IPV GmbH. ball screw, ball screw, ball roller spindle, Type 80270, D50 mm, 1300 mm, Fa. Honsberg, ball screw diameter 50 mm, pitch 10 mm, Thread length 1080 mm length of ball screw nut 142 mm, total stroke 938 mm, Total length of the spindle 1300 mm Diameter for coupling with motor 30 mm Diameter bearing seat A 35 mm, diameter bearing seat B 35 mm Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. Howe ...

Label Printers Industrial Printers Thermal Transfer Direct Thermal Printers 1 x Honeywell Label Printer DMX-A-4212 New from Spare Stock 1 x Honeywell Label Printer DMX-A-6310 New from Spare Stock

Engine Brand: HONDA, Condition: NEW, Engine Cooling Type: Air Cooled , Engine Color: Red , Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 4.3 Kw, Injection Type: Mechanical Fuelpump , Generator Hz: 50 , Generator Volts: 230 , Generator Amps: 12.2 , Generator Fases: 1 Fase + Nul (2 totaal) , , https://www.hamofa.com/stock/generators/honda-hp-4-3kw-generator-new/2 82, , = More information =, , Empty weight: 205 kg, Type number: HP 4.3KW GENERATOR

Engine Brand: HONDA, Conditie: NEW, Engine Cooling Type: Air Cooled , Engine Color: Black , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/honda-gx690-new/860, , = More information =, , Type: Engine, Type of fuel: Petrol, Empty weight: 50 kg, Type number: GX690

Engine Brand: HONDA, Condition: NEW, Engine Cooling Type: Air Cooled , Engine Color: Black , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/honda-gx690-new/22436, , = More information =, , Type: Engine, Type of fuel: Petrol, Empty weight: 50 kg, Type number: GX690

Engine Brand: HONDA, Condition: NEW, Engine Cooling Type: Air Cooled , Engine Color: Red , Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: Mechanical Fuelpump , Generator Hz: 50 , Generator Volts: 230 , Generator Amps: 12.2 , Generator Fases: 1 Fase + Nul (2 totaal) , , https://www.hamofa.com/stock/generators/honda-hp-4-3kw-generator-new/1 59, , = More information =, , Empty weight: 50 kg, Type number: HP 4.3KW GENERATOR

Engine Brand: HONDA, Condition: NEW, Engine Cooling Type: Air Cooled , Engine Color: Red , Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: Mechanical Fuelpump , Generator Hz: 50 , Generator Volts: 230 , Generator Amps: 12.2 , Generator Fases: 1 Fase + Nul (2 totaal) , , https://www.hamofa.com/stock/generators/honda-hp-4-3kw-generator-new/4 43, , = More information =, , Empty weight: 50 kg, Type number: HP 4.3KW GENERATOR

Honda diesel engine GRA 3-cyl. water-cooled, 1061 CC displacement, 15 kw / 20 HP / 3,000 1/min, engine with starter and alternator.

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Honeywell, Gas pressure switch -Type: C6097A2200 -Control range: 2.5 - 50 mbar -Pmax: 300 mbar -Dimensions: 85/65/60 mm -Weight 0.2 kg

Switchgear, control system, UV light, automatic burner control -Honeywell: 7800 Series Base Layer Panel -Price: per piece -Number: 8 pieces -Dimensions: 145/150/H70 mm -Weight: 0.3 kg

switchgear, control, UV light, firing system -Type: Honeywell EC7850 A 1122 -Price: per piece -Quantity: 5 pieces -Dimensions: 130/135/H145 mm -Weight: 1.3 kg

Switchgear, control, UV light -Type: Honeywell EC7830 A 1066 -Dimensions: 130/130/H115 mm -Weight: 900 g

Switchgear, control, UV light, -Honeywell Rectification flame amplifier -unused in original packaging: 1 -used: 1 -Number: 2x available -Price: per piece -Dimensions: 130/90/H50 mm -Weight: 100 g

Switchgear, control, UV light -Honeywell Keyboard Display Module German -unused: in original packaging -Number: 4x available -Price: per piece -Dimensions: 130/95/H50 mm -Weight: 300 g

Switchgear, control, UV light -Honeywell Keyboard Display Module -unused in original packaging: 3 -without original packaging: 2 -Number: 5x available -Price: per piece -Dimensions: 130/95/H50 mm -Weight: 300 g

Switchgear, control system, UV light -Honeywell dynamic self-check ultraviolet flame amplifier -Voltage: 220/240 V AC 50 Hz -unused: in original packaging -without original packaging: 1 -Quantity: 1 available -Price: per piece -Dimensions: 125/90/H50 mm -Weight: 100 g

High-frequency ignition system, heating, gas and oil burners, gas burner control unit, gas relay, control box, burner control, burner management, UV flame simulator -Manufacturer: Honeywell, Ultraviolet Flame Simulator -Type: 203659 7800 Series Burner Control -Cardboard dimensions: 130/90/H80 mm -Weight: 0.2 kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Honeywell, gas pressure switch unused, Ovp -Type: C6097A2310D -Control range: 30-150 mbar -P max.: 500 mbar -Number: 19x switches available -Price: per piece -Dimension box: 110/95/H95 mm -Weight 0.3 kg/piece

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Honeywell type: C6097A2410D -Control range: 100-500 mbar -P max.: 600 mbar -Pressure switch: 5 A-250 V -Protection class: IP54 -Price: per piece -Number: 23 pieces -Dimensions: 110/95/H95 mm -Weight: 0.3 kg/piece

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Honeywell type: C6097A2110D -Control range: 1.0-10 mbar -P max.: 200 mbar -Pressure switch: 5 A-250 V -Protection class: IP54 -Price: per piece -Number: 25 pieces -Dimensions: 110/95/H95 mm -Weight: 0.3 kg/piece

High-frequency ignition device, heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, UV flame simulator, ignition transformer, pressure monitor, pressure switch -Manufacturer: Fema Honeywell, pressure switch for fuel gases unused OVP -Type: DGM 310A -Number: 2x pressure switches available -Price: per piece -Dimension box: 160/90/H65 mm -Weight: 0.6 kg/piece

adjustable, vibrating feeder. Lxw = 1500x800mm Capaciteit 100 m3/h Adjustable from 0% to 100% With magnetic vibrator MA 220, MVE50, M60/130, MV 100/50 And new thyristor control.

Unused spare parts for Duritan lighting field Panacol-Elosol 3 UV tubes 2 chokes 1 Starter Please the PDF file with our terms and conditions and order form. The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider".

Diaphragm regulator for regulating valves -Differential pressure controlled membrane regulator: 0.1 - 0.3 bar -suitable for: Kombi 3 Plus -Return: DN10 - DN40 -Number: 12x available -Price: per piece -Weight: 0.5 kg

Pressure valve, pressure gauge, pressure indicator -Measuring range: 1-25 l/min -Fixture: Digital display -Dimensions: 80/50/H110 mm -Weight: 0.8 kg

gasoline engine, gas engine, drive engine -1 cylinder -Air-cooled -Engine power: 11 HP -Drive shaft: Ø 35 mm -Dimensions: 450/370/H430 mm -Weight: 35 kg

Rotary actuator for air flaps, air flap rotary actuator -Hollow shaft mounting: approx. Ø 32 mm -24 VAC -Protection class: IP 54 -20 Nm 90° Price: per piece Quantity: 1 available -Weight: 1.8 kg

Pressure switch -Type: C6045D 1043 -0.2-3 mbar -220/240 VAC 50 Hz 12(2) A -Pmax: 100 mbar -Protection class: IP 40 -Quantity: 3 pieces available -Price: per piece -Weight: 1.2 kg/piece

The offered enrobing machine is in very good condition. It is currently still in use and can be viewed on site. Further information is available on request. The pressing machine that can be seen at the end of the production chain is not part of this offer, but is also for sale (see our other listings).

; Gross weight [kg]: 114; Engine: GX 390; Accessories: Tanker, Battery, Sockets for welding cables, Socket 400 V 16 ASocket 230 V 16 A, Overload protection, Oil level sensor, Silencer with exhaust adapter; Water Tank Volume [l]: 45

; Gross weight [kg]: 125; Engine: GX 390; Accessories: Tanker, Battery, Sockets for welding cables, Socket 400 V 16 ASocket 230 V 16 A, Overload protection, Oil level sensor, Silencer with exhaust adapter; Water Tank Volume [l]: 45

further details see photos of the nameplate

vertical CNC turning center, year 2008, CNC 0i-TC. Used machine in good condition. More info & price on IndustrialBuyer.

honing diameter: 165 mm stroke: 120 mm centre height: 100 mm total power requirement: 1,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : SUNNEN (USA) Horizontal Automatic Honing Machine model MBC 1804 G year Serial no 1K1-190075 _____________________________________________________________ Honing range – Ø with gauge control 1,5 – 51 mm with automatic stroke 1,5 – 95 mm with manual stroke 1,5 – 165 mm Workpiece honing length max. approx. 400 mm Workpiece honing lengthe with gauge control 254 mm 12 spindle speeds 200 – 2.500 rpm 5 stroke rates 80 – 310 stroke/min Length range of automatic stroke 6 – 120 mm Power of spindle 0,75 kW - 380 V - 50 Hz Total drive appro. 1,5 kW - 380 V - 50 Hz Accessories / Special Feature ...

honing diameter: 125 mm stroke: 600 mm throat: mm Control: total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 7,5x5,2x4,4 m Unique honing machine built for inline motor blocks and v-blocks. Universal also for other parts because of the controlled movement of the table in y and the spindle in x. Movement x: 2000mm Movement y: +-150mm -2 step expansion SMA/HDA (mechanic/hydraulic) -In process air gauge Honing methods: -Normal honing -Short honing -Makro form Stop methods: -mechanical expansion: Step-automatic or air gauge automatic. -hydraulic expansion number of strokes, honing time or air gauge automatic. -Possibility of changing of spindle rotation direction after number of strokes while honing process. Machine like new with only 4.800 switch hours. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 45 mm stroke: 1000 mm throat: mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 4 spindle honing machine for guns Honing area according to the manufacturer: Diameter 5-45mm Maximum Honing Length 750mm Accessories: Honing tools for diameter: -10mm -12,3mm -13,3mm -21,1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gehring Honing Machine E 630-45 - Honing diameter: 3 - 45 mm - Honing length max: 350 mm - Number of honing spindles: 1 - Stroke length: 2 - 630 mm - Electric lift drive - Lifting speed: 1 - 40 m/min - Stroke control: infinitely variable - Spindle speed: 150 - 6000 1/min Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

This 9-axis FASSLER HMX 400 horizontal honing machine was manufactured in 2005. It features a comprehensive control system with Sinumerik 840 D, ensuring precision and ease of use. With a honing stone diameter of 400 mm and a machinable workpiece diameter up to 350 mm, it is ideal for both external and internal honing. Consider the opportunity to buy this FASSLER HMX 400 horizontal honing machine. Contact us for more information about this machine.

honing diameter: 125 mm stroke: 350 mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Two step expansion for pre and finish honing Air gauge measuring Fixture for honing a 4 cylinder block Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bearing number: 3694 HONING MACHINE Manufacturer: PLEIGER, Type: B - 290 Year of construction: 2002 Specifications: honing length 10000 mm workpiece size dia. 355 mm Min. Max. Honing Dia. 290 mm Length: 27,000 mm, Høhe: 10,000, Width: 2,000 mm, Weight: 30,000 Kg