hole drill used for sale

punching pressure: 28.0 t punching cross-cut in cmm: 31 in 7.0 mm ST throat: 250 mm dayligth: 223 mm no. of strokes: 10 - 30 Hub/min oil volume: 32.0 ltr. work height max.: 1033 mm total power requirement: 3.0 kW weight of the machine ca.: 553 kg dimensions of the machine ca.: 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amp ...

pressure: 30.0 t punching cross-cut in cmm: 30.0 in 9.0 mm stroke: ca. 35 Hub/min throat: 610 mm stroke - stepless adjustable: 0 - 28.0 mm oil volume: 35.0 l work height max.: 1010 mm total power requirement: 4.0 kW weight of the machine ca.: 1200 kg. range L-W-H: 1400 x 700 x 1600 mm good condition () with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel The data for this ad was created with ModulMWS - the softwar ...

pressure: 70.0 t punching cross-cut in cmm: 27 in 20 mm punching cross-cut in cmm: 32 in 14 mm work height max.: 1060 mm column arm: 500 mm weight of the machine ca.: 1500 kg. total power requirement: 7.0 kW range L-W-H: 1550 x 1200 x 1950 mm good / well-maintained condition () New price approx. 21.000 euros Special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment - die base - 1x freely movable foot switch - operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t punching cross-cut in cmm: Ø 31 in 25 mm stroke: 10 - 50 mm column arm: 510 mm work height max.: 1100 mm no. of strokes: 14 - 45 Hub/min punch diameter: max. Ø 90.0 mm oil volume: 103 l total power requirement: 7.5 kW weight of the machine ca.: 2400 kg. range L-W-H: 1750 x 1020 x 2050 mm maintained condition () New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual The data for this ad was created with ModulMWS ...

Punching force: 300 kN For example, punches a 20 mm hole in 12 mm steel Stroke release via foot switch Range of tools is included in the price

pressure: 50 t throat: 610 mm total power requirement: 7,5 kW machine weight ab.: 1700 kg dimensions: 1500 x 650 x 1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2700x2500x1760 mm Weight: 1500 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3900x2500x1760 mm Weight: 2000 kg Total power requirement: 6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5000x2250x1650 mm Weight: 2600 kg Total power requirement: 11,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3900x2500x1760 mm Weight: 1800 kg Total power requirement: 5,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3900x2500x1760 mm Weight: 2000 kg Total power requirement: 9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3900x2500x1760 mm Weight: 1800 kg Total power requirement: 6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2700x2500x1760 mm Weight: 1500 kg Total power requirement: 5,9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3900x2500x1760 mm Weight: 2000 kg Total power requirement: 11,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3900x2500x1760 mm Weight: 1800 kg Total power requirement: 6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working pressure: 300 bar total power requirement: / kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25437 Technical data: - Pressure capacity 500 KN - Stroke infinitely adjustable 10 - 32 mm - Stroke rate 22 - 27 1/min - Projection 510 mm - Installation height 350 mm - Drive 400 V / 4 kW - Holes e.g. up to 27 mm Ø in steel 14 mm - With special punching saddle, e.g. up to 39 mm Ø in steel 9.5 mm - e.g. up to 90 mm Ø in steel 4 mm - Space requirement approx. W 700 x H 1700 x D 1200 mm - Weight approx. 1150 kg - with: - Hydr. Low-Pressure Grain Locator - Long punch holder for punching in sectional steel - Roller conveyor with plier feed control PEHU 101 - Roller conveyor approx. 6000 mm - Footswitch - Emergency stop button

Punching force: 1000 kN Projection: 760 mm For example, punch a 40 mm hole in 22 mm steel Stroke release via foot switch Quick-change device Range of tools is included in the price 3000 kg

Punching force: 560 kN For example, punches a 30 mm hole in 15 mm steel Stroke release via foot switch Range of tools is included in the price

Mechanical hole punch with a punching force of 1000 kN. Tool holder for punches up to 90 mm can be mounted on request. A large assortment of stamps and dies is included in the scope of delivery.

punching force max.: 50 t throat: 510 mm stroke: 32 mm stroke - stepless adjustable: 10 - 32 mm no. of strokes: 35 bei 10 mm Hub/min Working height: 1070 mm daylight: 350 mm table width: 255 mm dimensions: ca. 1080 x 650 x 1680 mm material layer: 630 X 535 weight: ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3 and 4, up to Ø 39.5 mm Quick-change device for punches 3 and 6 up to Ø 39.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 620 mm stroke: 0-100 mm hole diameter in sheet thickness: 40 in 20 mm no. of strokes: 49 Hub/min Control: total power requirement: 15 kW weight of the machine ca.: 3.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 1250mm -Length: 1595mm - Height: 47mm - Holes: M16 grid 50 x 50 mm -Drilling: 22 mm grid 450 x 400 mm -Plate: without straight edge -Number: 1 piece available -Weight: 700kg

Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg

Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punching press -Manufacturer: Mubea, hole punch type KL 100 -Printing capacity: 100 tons -Punching capacity: see photo type plate -Thrust: 500 mm -Accessories: incl. see photos -Dimensions: 1460/880/H2100 mm -Weight: 2660 kg

Punching force: 300 kN For example, punches a 20 mm hole in 12 mm steel Stroke release via foot switch Support table Range of tools is included in the price

Offer 26088 Technical data: - Flat steel shears - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notches - With square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - Perforates in steel up to Ø 31 in 15 mm - E. Contact stop - various punches + dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

working area: X .. 370 mm working area: Y .. 700 mm pressure: 28.0 t plate thickness: max. 12.7 mm ST throat: 310 mm height of stroke: 0 - 40 mm no. of strokes: max. 180 Hub/min punch diameter: max. 105 mm : 845 x 1420 mm work height max.: 900 mm oil volume: 50.0 l total power requirement: 5.0 kW weight of the machine ca.: 1800 kg range L-W-H: 1800 x 1200 x 1500 mm New price including accessories approx. 35,000 euros Special price on request The machine was used continuously in a test area and as a result has very few operating hours ! The ECCO LINE hydraulic punching machine has been specially optimized for the processing of sheet metal and profile parts. It is characterized by its The machines of the ECCO LINE series are equipped with a punching force of LINE series are equipped with 28 tons of punching force in conjunction with the proven Trumpf tool system. Tool change time approx ...

Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Large WBL support table with stop cam Stroke release via foot switch Range of tools is included in the price

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Handover: in its current condition as inspected -Condition: see pictures -Clamping angle: for workpiece clamping -Table surface: 730x610 mm, height 1595 mm -Wall thickness: 35/42 mm -Oblong hole: 25x150/25x105 mm -Dimensions: see photos -Number: 4x mounting brackets available Price: per piece -Dimensions: 610/730/H1595 mm/piece -Weight: 658 kg/piece

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 1085x885 mm, height 2185 mm -Wall thickness: 70 mm -Threaded holes: M20 -Dimensions: see photos -Number: 2x mounting brackets available -Price: per piece -Dimensions: 885/1085/H2185 mm/piece -Weight: 2280 kg/piece

gebr. Knothole drilling machine RAPID Type: AM Built in 1987 Motor power: 0.45 / 0.6 kW 2 speeds. 1,400 + 2,800 rpm Rated current: 1.4 A / 1.85 A (380V / 16A plug) Machine stand with drilling table and integrated tool compartment Table size: 78 x 49 cm 4-spindles Lifting device when changing drill bits Unit adjustable in height (adjustment range: 100 mm) incl. swivel device Ferry incl. various Gebr. Drills Machine dimensions (approx. dimensions): 49 x 110 x 178 cm (WxDxH) The machine comes from a school training center. Very good original condition! Manufacturer information

Pitch: 32 mm Motor output: 1,8 kW Clamping height max.: mm Overall size: mm Weight: 240 kg Number of boring spindles: 21 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35.0 t plate thickness: max. 8.0 mm throat: 830 mm diameter of seal: max. 105 mm table:: 1500 x 1200 mm work height max.: 920 mm Pressure power: 220 bar oil volume: 80.0 l total power requirement: 4.0 kW weight of the machine ca.: 3200 kg range L-W-H: 1600 x 1800 x 1800 mm The IS 35 hydraulic punching machine has been specially optimized for processing sheet metal and extruded parts. It stands out for its flexibility and manufacturing precision. The machines in the IS series are equipped with 35 metric tons of punching force. Features: - Electro-hydraulic punch press with long reach - Robust C-frame construction Solid cast or welded frame (C-shape) Extremely high punching precision Compact design = small footprint Hydraulic overload protection - Separate control unit - Single and continuous stroke selectable - Infinitely adjustable controller for: âtop dead centerâ? -  ...

Technical data Engine COBRA-B Work table (w × d) 500 × 360 mm Work container (w × t) 800 × 500 mm Max. distance to the working head to the work table 450 mm Travel (X, Y) 300 × 200 mm Max. workpiece weight 300 kg Drilling diameter 0.5 – 3.0 mm Option 0.3 – 4.0 mm Max. feed speed 250 mm/min. Machine weight 900 kg Dielectric system Fuel tank capacity 35 litres Power consumption 1.0 kVA Auction-ID: A7-48332-800

pressure: 40 t throat: 175 mm work height max.: 1055 mm stroke: 30 mm sheet thickness - max.: 8 mm total power requirement: 4 kW weight of the machine ca.: 1020 kg dimensions: 910 x 670 x 1930 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nr 7 digital calipers of different measurement ranges. Items sold in unverified status. Items not subject to sales restrictions Auction-ID: A7-48361-237

Auction-ID: A1-48530-2297

Auction-ID: A1-48530-2296

Auction-ID: A1-48530-2288

Can only be used as system construction panels – no view quality For example, with a frame or similar, mostly still functional Length 8x 3000mm, 5x 2500mm and 5x 1000mm Colour white/white or a few white/light grey and red All panels with major damage Scratches, cracks, holes Auction-ID: A1-48530-2885

Knothole drilling machine Bäuerle Three-spindle drilling machine Type AL With 3 drilling jacks Drill bits can be individually Or be connected together by foot lever Stroke 80 mm Column projection 560 mm Two-jaw chuck clamping range 0-16 mm Motor power 0.7 kW Weight with pallet 450 kg Dimensions 880 mm x 750 mm x H 1750 mm Loading dimensions 1200 mm x 800 mm x H 1900 mm

New set consisting of 2× 9-piece hole saw set. Volume of the lot: 2× 9-piece hole saw set Auction-ID: A1-48386-69

New set consisting of 2× Work-it 11-piece hole saw set. Volume of the lot: 2× Work-it 11 Piece Hole Saw Set Auction-ID: A1-48386-70

HBM 16-piece hole saw set – 19-127mm diameter, suitable for wood, plaster and plaster (2x) Make perfect round holes in different materials with the HBM sixteen-piece hole saw set. With the complete set, you can easily make smooth holes up to 25 mm deep. About the HBM 16 Piece Hole Saw Set Do you want to make smooth, round holes in wood or other material? Then choose this sixteen-piece hole saw set from HBM. Choose the right hole saw and use a cordless or drill to create the perfect circular hole without unsightly serrated edges. This way you can easily make holes to place taps, slide hoses through or to place light switches. Hole saws are widely used by construction professionals and DIY enthusiasts alike. With this hole saw set from HBM, make round holes in wood, plaster and plaster among other things. You may also know hole saws under the name hole saws, drill crowns, hole drills or ...

The set comes in a sturdy lockable box with various compartments where everything fits perfectly. Complete set with hole saws, hole holder, mounting plate and Allen key. The hole saws are made of sturdy metal. Auction-ID: A1-40893-81

The set comes in a sturdy lockable box with various compartments where everything fits perfectly. Complete set with hole saws, hole holder, mounting plate and Allen key. The hole saws are made of sturdy metal. Auction-ID: A1-40893-322

Auction-ID: A1-48530-2171

Drill Bit Grinding Machine GÜHRING Type SS 15Fabr. No. 909 Year of construction approx. 1977Drill diameter max. 40 mmGrinding wheel diameter right 300 mmGrinding wheel diameter left 250 mmGrinding wheel width 40 mmGrinding spindle speed approx. 2800 rpmMotor power approx. 2.2 kWNet connection 380 volts, 50 Hz- tip angle infinitely adjustable- Sharpening device- Gear motor for height oscillation in front of the cup wheel- Diamond dressing holder- Various drill holders-

Table, Drilling and Tapping Machine FLOTT Type TBZ 15 GLFabr. No. 32177027 year of construction 1986Drilling capacity 15 mmSpindle mount MK2Throat depth 195 mmPine stroke 80 mmTable size 275 x 200 mmColumn diameter 70 mmSpindle speed 80 - 4500 rpm. 18 stepsMotor power 0.55 + 0.75 kWNet connection 380 volts, 50 Hz- 6 belt steps from the motor and 2 belt stages to the drilling spindle 2 motor speeds- 3 pieces guide cartridges 0.7mm + 0.8mm and 28G available- Drill head height adjustment via crank with rack on the