128,007 used machines on RESALE, but how to find them? Machine Search
Dowel and slotted hole drilling machine HOFFMANN HT 200 very good condition, the machine comes from an educational institution, has been used only a little and is as good as new, it has very few signs of use this allows slotted holes to be milled and dowel holes to be drilled, and the drilling height can be read very precisely on a digital counter with 3 drill bit holders: for drills with M10 external thread and for drills with 12mm and with 16mm shank, plus you get a 2-jaw chuck for drills from 3- 20mm with workpiece auxiliary supports on the left and right, which can be swivelled and have a carrier roller the machine has a landing gear with 2 angle stops on the machine table for left and right The clamping arms can be moved and moved with stake-out device for parapet railings, which is adjustable from 80-160mm and has a digital counter, with pick-up mushroom 380V, 1400 and ...
CNC Deep Hole Drilling Machine Shinil (Korea) Year: 2009 Control: Fanuc Oi-TD Key Technical Specifications • Drilling diameter (solid): Ø 50 – 200 mm • Counter boring max: 500 mm • Trepanning max: 500 mm • Max drilling depth: 6000 mm (6 meters) Workpiece & Motion • Z-axis stroke (tool free): 6000 mm • Work spindle stroke (max): 4000 mm • Z-axis rapid feed: 5000 mm/min • Z-axis cutting feed: 0 – 1000 mm/min • Control axis: Z-axis CNC controlled Spindle & Speed Range • Headstock rotation: 5 – 30 rpm • Tool holder spindle speeds: • 50 – 500 rpm • 25 – 250 rpm • 16.6 – 166 rpm • 8.3 – 83.3 rpm Cooling & Drives • Coolant pump control: Inverter-driven • Motor control: NC controlled spindle & tool rotation Power & Installation • Total power: approx. 335 kW • Power supply: AC 440V / 60Hz ...
Deep hole drilling machine 2-spindle in conversion completely overhauled, like new after conversion. Technical data Drilling method ELB system Number of drilling spindles 2 Min. drilling diameter 1 mm Max. drilling diameter 8 mm Max. drilling depth 300 mm Nominal diameter range workpieces 5-30 mm
Key data: 6 mm, 350 mm, 1
Refurbished 2005 Number of Spindles: 2 Drilling capacity/spindle, steel: 1-6 mm Drilling depth: max. 350 mm Travel Z: 350 mm Travel W: 350 mm Drive power/spindle - 100% ED 3.7 kW - 50% ED 5.5 kW Spindle speed: 3,000 - 27,000 1/min Spindle holder: Ø 10 - 60 mm Coolant pressure: max. 150 bar Coolant flow: 48 l/min Coolant quantity: 1,000 l
Dowel hole drilling machine Brand: VITAP Type: ALFA 21 CLASSIC New machine - One boring unit 21 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreed and any intermediate angles) - Front/top caliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator; - 6 positions turret to adjust the drilling depth (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mms) - Drilling speed adjustment from the panel control - Strengthened steel structures for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropneumatic circuit by mean ...
Nominal drilling depth 750 mm Full drilling in steel approx. 30 mm Spindle speed max. 5700 min-1 Clamping table 1280 x 420 mm Transverse Sliding Table Coolant tank Miscellaneous Accessories
A Gebrüder Irle CNC large-format deep-hole drilling machine is available. Drilling capacity steel: 40mm, max. drilling depth: 1600mm, drill spindle adjustment: 350mm, vertical drilling unit adjustment: 700mm, power: 30kW, speed: 2940rpm, field range constant power: 1-3, armature range constant torque: 1-35, max. drill spindle torque: 1500Nm, rated speed: 163rpm, spindle flange diameter: 200mm, quill diameter: 2000mm. Feed: 500mm/min, rapid traverse: 1200mm/min, max. feed force: approx. 34.3kN, display: 0.005mm, vertical adjustment travel: 700mm, longitudinal adjustment travel: 13000mm, transverse adjustment travel: 650mm, swivel: 85°. Clamping plate dimensions X/Y/Z: 12500mm/1000mm, guide bed dimensions X/Y: 3350mm/455mm, controls: Heidenhain TNC 310. Documentation available. An on-site inspection is possible.
core drilling diameter max.: 50-600 mm bore depth: 6000 mm table load: 6 t turning speeds: 50-600 U/min clamping diameter max.: 650 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Boring (pushing) from ID = 50 to 320 Skyving and roller Burnishing from ID = 50 to 300 Honing from ID = 50 to 320 Extraction system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit ...
Inv. Num. : 9173 Type: CM-H32Z Producer: CHMER Created: 2001 Parameters: Max. travel length of the X-axis: 300 mm Max. travel length of the Y-axis: 250 mm Maximum workpiece length: 610 mm Maximum workpiece height: 200 mm Maximum workpiece height: 420 mm Maximum table load: 120 kg Length: 1523 mm Width: 1183 mm Height: 2158 mm Weight: 700 kg
Number of spindles hole row: 11; Number of spindles horizontal: 3; Cup belt drill head: yes, Blum; Drill pitch: 32mm; Power consumption: 2.2kW; Drilling unit: swivelling;
PANHANS 116 YOC 1986 Motor power: 1.5 kW 2-lever operation Max. drilling depth: 130 mm Height adjustment: 135 mm Max. slotted hole length: 240 mm Height adjustment by handwheel Dowel pitch: 16 / 22 / 25 / 32 mm Miter ruler (adjustable) Workpiece stop 1 eccentr. Workpiece clamp Line laser (Z-laser) 230V Chassis Table size: 510 x 290 mm Weight: 220 kg incl. various Gebr. Drills Dimensions (approx. dimensions): W: 90 cm T: 125 cm H: 115 cm Manufacturer information
Number of Spindles: 20; Drill pitch: 32mm; Power consumption: 1.8kW;
Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 145 mm; Elongated hole length: 240 mm; Height adjustment range: 135 mm; Motor power: 1.3 / 1.8 kW; Speed: 1400 / 2800 rpm; Hold-down: manual; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 300 kg;
Number of spindles hole row: 16; Number of spindles horizontal: 5; Cup belt drill head: yes; Drill pitch: 32mm; Hold-down : yes / pneumatic; Power consumption: 2.2kW; Drilling unit: swivelling;
Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 180 mm; Elongated hole length: 240 mm; Height adjustment range: 160 mm; Motor power: 2.2 kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 260 kg; Work table can be rotated by 60 degrees on both sidesSimple operation via one-hand lever for fast and precise workDrill head mounted on double guideClamp stops allow easy and quick adjustment of the drill head runHeight adjustment of the drill head via handwheel with numerical
Dowel hole drilling device: no; Drilling depth: 150 mm; Elongated hole length: 180 mm; Height adjustment range: 145 mm; Motor power: 1.5kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 240 kg; Solid slotted hole drilling machine with 2 lever controls.
Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 150 mm; Slotted hole length: 250 mm; Height adjustment range: 145 mm; Motor power: 1.5kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 160 kg;
Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 145 mm; Elongated hole length: 240 mm; Height adjustment range: 135 mm; Motor power: 1.5kW; Speed: 2800 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 250 kg; Solid slotted hole drill with a lever operation.
Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 145 mm; Elongated hole length: 240 mm; Height adjustment range: 135 mm; Motor power: 1.5kW; Speed: 2800 rpm; Hold-down: manual; Machine length: 1280 mm; Machine width: 960 mm; Weight: 300 kg;
Auerbach AX TBE 200.1Year of manuf. : 2013 ____________Description:In general:Drilling-ø (max.):3,5 mmDrilling depth (max.):200 mmDeep drilling module:Technology:DrillingspindleSpeed (max.):10.000 rpmPower:3,5 kWTaper:HSK-A40Equipment/Accessory:Chipmanagement:Chip trayCoolingmanagement:Internal cooling unit with Filter and High-pressure, 140 barWorkpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140Oilmistseparation:Electrostatic extraction, LTA AC 500Further Accessory:Misc. Single lip driller
Slotted Hole Drilling Machine Holzkraft Type LLB 16 H Item No. 532 6617 Year of construction 2010 With dowel device Table size 500 mm x 200 mm Drilling width 200 mm Drilling depth 150 mm Drill head height adjustment 150 mm Wescott Drill Fiutter 0-16 mm Speed 3000 rpm. Motor power 1.1 kW Table fixed Drilling unit movable Weight 120 kg
IXION TL 500 SVA Deep Hole Drilling Machine Manufacturer: IXION Model: TL 500 SVA Year of Manufacture: 1985 Serial Number: 113178 Origin: Germany Drilling Capabilities: Drilling diameter: 1.5 – 18 mm Advertised drilling depth: 600 mm Table and movements: Fixed table: 700 × 1,350 mm Circular tabletop: 1,000 × 500 mm Longitudinal stroke: 600 mm Stroke in the direction of drilling: 400 mm Swivel table: 180° Drilling unit: Vertical carriage stroke: 250 mm Unit orientation: ±15° Spindle Taper: CM3 Spindle and control: Number of speeds: 8 Speed range: 240 – 2,400 rpm CNC Control: Bosch Alpha Digital display: Heidenhain 3-axis Power and Size: Engine power: 1.0 / 1.6 kW Installed power: 10 kVA Dimensions (L × W × H): 2,000 × 1,500 × 1,800 mm Weight: approx. 1,350 kg Auction-ID: A1-48609-265
length: 1980 mm width: 670 mm height over floor: 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Power: 22 HP, 2880 min-1 EMB electric motors AG Switzerland Stainless steel housing Hopper with feeding screw Dimensions: LWH = 400x400x1300mm (without screw) Weight: 300 kg
pressure: 110 t : Ø 40x20 mm throat: 500 mm engine output: 9 kW no. of strokes: 28 Hub/min stroke max.: 80 mm weight: 3150 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pneumatically driven punching, Horizontally arranged. Pedicure Manufacturer: Meuleman Engineering BV Vosseboerweg 7 7683 SH Den Ham (Ov) Punching force 200kg Special price
Mechanical punch with a punching force of 1000kN. tool holder for stamps up to 90 mm can be mounted on request. A wide range of stamps and dies is included in the scope of delivery.
Maximum punching force: 650 kN More performance data see nameplate or on request Inclusive range of punches and matrices
Flange bearing -Bore: Ø 100 mm -Mounting hole: Ø 26 mm -Dimensions: 264/264/H60 mm -Weight: 11.4 kg
Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -with: drill holes -Width: 395 mm -Length: 495 mm -Height: 30 mm -Weight: 53.5 kg
Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -with: holes -Width: 400 mm -Length: 500 mm -Height: 30 mm -Weight: 45 kg
Clamping plate with T-slots, plate field, welding table, welding table, pallet changer -comes: from a CNC machining center -Width: 440 mm -Length: 400 mm -with: support ribs -with: instep index -Number: 2x plates available -Price: per piece -Weight: 74 kg
Flange bearing -Bore: Ø 20 mm -Mounting hole: Ø 12 mm -Bore distance: 64 mm -Dimensions: 130/130/H50 mm -Number: 16x available -Price: per piece -Weight each: 1.7 kg
T-slot plate, clamping plate with holes, plate field, welding table, welding table -Dimensions: 3012/2010/H710 mm -Panel thickness: 82 mm -Plate: with supporting ribs -Weight: 3370 kg
Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.
Clamping plate, plate field, welding table, welding table, plate boring machine, surface plate, -with: holes -Width: 1000 mm -Length: 1000 mm -External height: 150 mm, panel thickness 100 mm -Number: 7x plates available -Price: per piece -Weight: 720 kg/piece
In-line hole drilling machine Scheer DB 4 L x W x H: 1500 x 1500 x 1900 mm Weight approx. 1000 kg Built in 1980 1 aggregate vertically up 1 aggregate horizontal - vertically pivotable The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Flange bearing 4-hole -Bore: 35mm -Outside: Ø 135 mm -Price: per piece -Quantity: 1x available -Weight: 1.2 kg
2-hole flange bearing -Type: 01CJT05 -Designation/Type: Flange bearing unit -d = Inside: 25 Price: per piece -Number: 71x available -Weight: 0.6 kg/piece
Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Table surface: 995 x 197 mm, height 995 mm -Wall thickness: 39 mm -Bores: M20 -Clamping grooves: 172 x 21 mm -Dimensions: 995/197 / H995 mm -Weight: 160 kg
Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg
Flange bearing, housing bearing, flange bearing unit -Manufacturer: PTI, flange bearing unit type FWS40U -Bore: Ø 40 mm -Mounting hole: hole spacing 102 x 14 mm -Number: 3x flange bearing available -Price per piece -Dimensions: 128/128/H50 mm -Weight: 2.2 kg/pc.
stroke: 70 mm work height max.: 1094 mm throat: 500 mm : 40 in 14 mm no. of strokes: 20 Hub/min throat: 500 mm : 80 to engine output: 9 kW range L-W-H: 1980x1150x2000 mm weight: 2000 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 90 x 90mm -Total dimensions: Ø 157 x 135 mm -Weight: 6.8 kg
Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 69 x 69 mm -Total dimensions: Ø 128 x 120 mm -Weight: 4.8 kg
pressure: 55 t hole diameter in sheet thickness: Ø 40 in 10 mm throat: 500 mm stroke: 60 mm : 38 /min. engine output: 5 kW weight of the machine ca.: 1.150 kg Overall size: 1500x1100x2000 mm Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
800 € 
