hole drill used for sale

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 520 mm : 230 mm table surface area: 730 x 210 mm connected load frequency: 400 V total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 257 mm bore stroke: 115 mm boring spindle: MK 4 boring chuck: 16 mm bore depth: 120 mm table surface area: 475 x 425 mm column diameter: 92 mm total power requirement: 1,1 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 0,75 x 0,85 x 1,72 m Sturdy bench drill with - Keyless chuck - Drilling depth setting - emergency stop - Rotatable table top The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel: 30 mm threading cutting capacity:: M20 throat: 260 mm bore stroke: 125 mm spindle taper: MK 3 spindle turning speed range: 80 - 1440 / 180 -3200 U/min transmission ratio: 2 Stufen column diameter: 110 mm table surface area: 500 x 365 mm total power requirement: 0,8 / 1,4 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark The data for this ad was creat ...

grinding range: 2 - 13 mm sharp cornered angle min./max.: 90 - 140 Grad connected load: 230 V weight of the machine ca.: 10 Kg dimensions of the machine ca.: 0,35 x 0,2 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 115 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 350 mm : 130 mm table surface area: 590 x 190 mm connected load frequency: 400 V diameter of hob: max. 80 mm feed: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,1 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,7 x 0,95 x 1,75 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding range: 3 -28 mm angle adjustable from - to: horizontal 0-180 Grad angle adjustable from - to: vertikal 0-45 Grad angle adjustable from - to: negativ 0-52 Grad clamping range: 3 - 28mm mm 0: 5200 U/min connected load: 230 / 250 Volt / Watt wheel diameter: 100 x 50 x 20 mm weight of the machine ca.: 45 Kg dimensions: 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16 - 5/16 - 3/8 - 1/2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 45 mm throat: 230 mm bore stroke: 125 mm spindle taper: ISO 30 spindle turning speed range: 75 - 1600 U/min max. milling cutter diameter: 80 mm : 560 mm : 230 mm table surface area: 800 x 240 mm max. distance between table and spindle-nose: 460 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 320 Kg dimensions of the machine ca.: 1,0 x 0,8 x 1,45 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min : 500 mm : 230 mm table surface area: 720 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 320 mm bore stroke: 155 mm spindle taper MT: 4 MK table:: 500 x 420 mm column diameter: 120 mm turning speeds: 125 - 3030 U/min feeds: 0,1 - 0,2 - 0,3 mm/U total power requirement: 1,2 kW weight of the machine ca.: 540 kg. range L-W-H: 0,8 x 0,55 x 2,2 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel: 30 mm threading cutting capacity:: M20 throat: 260 mm bore stroke: 125 mm spindle taper: MK 3 feed range - spindle: 0 mm/U spindle turning speed range: 80 - 1440 / 180 -3200 U/min transmission ratio: 2 Stufen column diameter: 110 mm table surface area: 500 x 365 mm total power requirement: 0,8 / 1,4 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark T ...

bore capacity in steel (diameter): 40 mm throat: 275 mm bore stroke: 120 mm spindle taper: MK 4 turning speed range: 75 - 3200 U/min : 190 mm : 490 mm table surface area: 700 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 250 mm bore stroke: 130 mm spindle taper MT: 3 MK table:: 380 x 380 mm column diameter: 98 mm turning speeds: 75 - 3200 U/min feeds: mm/U total power requirement: 1,1 kW weight of the machine ca.: 220 kg. range L-W-H: 0,5 x 0,6 x 2,05 mm Gear drill Thread cutting device Left/right barrel Tilting work table. Lighting. 2 electric Speed levels. Depth stop. Gears run in oil. Packaging dimensions: 2100x400x710mm Weight 260kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 200 mm bore stroke: 120 mm spindle taper MT: 4 MK table:: 290 x 270 mm column diameter: 92 mm turning speeds: 150 - 2450 U/min feeds: 0 mm/U total power requirement: 1,1 kW weight of the machine ca.: 95 kg range L-W-H: 0,66 x 0,8 x 1,7 m Column drilling machine with: ARBO / CE approved protective cover. Quick release chuck with pin. Tiltable work table. Deep stop. Ejector wedge. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK 3 spindle turning speed range: 50 - 3000 U/min : 280 mm : 155 mm table surface area: 500 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,8 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A double-sided Busetti glass drilling machine is available. Drilling heads: 2, drilling dimensions X/Y: 1250mm/1450mm, min. drilling diameter: 3mm, max. drilling diameter both drills/with top drill: 130mm/220mm, speed: 4000rpm, max. glass thickness: 38mm. Machine dimensions X/Y/Z: approx. 4500mm/2050mm/2300mm, weight: approx. 1700kg. An on-site inspection is possible.

bore capacity in steel (diameter): 50 mm bore capacity in cast iron (diameter): 60 mm threading cutting capacity:: M36 throat: 400 mm bore stroke: 230 mm spindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range: 54 - 1032 U/min transmission ratio: 12 Stufen column diameter: 200 mm table surface area: 550 x 550 mm total power requirement: 3,0 kW weight of the machine ca.: 0,72 t dimensions of the machine ca.: 2,6 x 0,6 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-a ...

number of spindles: 2 bore capacity in steel (diameter): 10 mm bore stroke: 100 mm weight of the machine ca.: 0.3 t dimensions of the machine ca.: 0.67 x 0.62 x 1.7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25170 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1: 60 - 210 rpm - Level 2 210 - 765 rpm - Level 3 120 - 420 rpm - Level 4: 420 - 1530 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance machined base plate - drilling spindle 1250 mm - Coolant device -Lighting - Machine vise - div. 10 pcs HSS - Drill - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

Spindle diameter 135 mm Morse 6 Attachment Cone Max. drilling depth in 1 pass 600 mm Min. distance spindle-column axis 485 mm Max. distance between spindle and mast axis 3,500 mm Min. distance from spindle to table 520 mm Max. distance from spindle to table 1,845 Min distance from spindle to plate - base 1,130 mm Max. distance from spindle to plate - base 2,455 mm Min drilling radius from column axis 820 mm Max. drilling radius from column axis 3,875 mm Max. drilling diameter 78 mm stroke 8,000mm stolle top 10.000X2.500mm

Paper drill Nagel Citoborma 490, machine number 41648, 4 drill heads, functional, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Bdobr Sbevr U Rve Nwkjc You are welcome to visit the machine in our house by prior appointment.

Paper drill Hang 106DTK4, machine number 62407, in good condition, immediately available

bore capacity in steel (diameter): 2...20 mm throat: 210 mm bore stroke: 100 mm total power requirement: 1,1 kW weight of the machine ca.: 0,165 t dimensions of the machine ca.: m - spindle taper: MK 2 - max. drilling capacity: 2 ... 20 mm - distance center drill spindle to column : 210 mm - distance from spindle to table : 400 mm - max. stroke of spindle: 100 mm - adjustment of spindle stock 250 mm - table size: 340 x 280 mm - 4 speeds of drilling spindle: 355 ...2800 per minute - rated power: 1,1 kW - weight: 165 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column Drilling Machine CINCINNATI PTC 20 Spindle CM3 Spindle exit: 150 mm Spindle speed: from 100 to 3800 RPM Rotating table Table size: 430 x 430 mm Throat depth: 280 mm Spindle motor: 1,5 kW Drilling/taping function Voltage: 220 V Tri Width: 600 mm Depth: 1100 mm Total height: 1900 mm Weight: approx 400 KG

For sale: AXA VSC 1 3000 M Vertical CNC machining center built in 1986 For sale is a vertical CNC machining center of the type AXA VSC 1 3000 M from 1986. The machine is designed for the precise machining of medium-sized to large workpieces and is suitable for both single part production and series production. It is characterised by its robust design, stable travelling column structure and reliable control technology. Specifications Travel X Y Z approx. 1820 mm 450 mm 480 mm Table size approx. 1900 x 450 mm Spindle speed up to approx. 8000 revolutions per minute Machine weight approx. 5500 kg Construction of the travelling column with fixed machine table Cooling Internal Cooling IKZ with Chip Conveyor Condition: used, functional, ready to be demonstrated, energized Particularities Solid machine design ideal for precise roughing and finishing Good access to the worksp ...

Manufacturer: ATLAS COPROD Model: ROC - L7(40) CR Year of Manufacture: 2008 Engine Hours (Old engine) : 8,043 - New reconditioned engine was installed recently. Find more here - / Contact us at -

Code: 0149 Brand: STEMA - 2BR Model: INSERMATIC CB/JUNIOR 86 Manual drilling and inserting machine for hinges or plates for kitchen, bathroom, custom furniture, panels and various Upright frame with table 1 mt Electropneumatic drilling unit with Hp 2 motor 3000 rpm Drilling head with 3 spindles for hinges Hinge housing pad N° 3 stops placed on table Dust collector complete with bags Foot pedal for start Voltage 400 V - 50 Hz Overall dimensions mm 1000 x 1100 x 1750 h Weight kg 130

High: 2.900 mm, Long: 2.200 mm, Speed: 22.4 / 2.800 r.p.m., Width: 900 mm, Weight: 2.350 kg, Voltage: 220 / 380V, Ø column: 300 mm, Ø spindle: 80 mm, Total power: 5.3 kW, Spindle displacement: 360 mm, Surface of the table: 1,300 x 750 mm, Do not. drill spindle speeds: 15, Advances min / max spindle chuck: 0.032 / 1.5, Number of drill spindle advances: 12, Max. distance spindle axis column: 1.200 mm, Maximum distance table to spindle: 1.100 mm, Minimum distance table to spindle: 750 mm, Specification: Radial

High: 2.217 mm, Long: 755 mm, Speed: 134/970 rpm, Width: 480 mm, Weight: 440 Kg, Voltage: 220/380 V, Ø column: 150 mm, Base width: 480 mm, Total power: 1.10 HP, Cone spindle: MORSE 3, Length of base: 755 mm, Transmission type: Exchange Box, Spindle motor power: 1 Cv, Ø max. drill steel: 25 mm, Engine cooling power: 0.10 Cv, Spindle displacement: 180 mm, Ø max. steel threaded: M 30, Spindle column neckline: 320 mm, Do not. drill spindle speeds: 8, Angle of inclination of the table: YES, Max. distance spindle axis column: 320 mm, Maximum distance table to spindle: 846 mm, Minimum distance table to spindle: 60 mm, Specification: Column

BFTech JZ-25 Max drill capacity: 25 mm Belt - vario (from -- to): 240 > 2710 rpm Height: 1100 mm

Ibarmia EAP 60 Mk5 Admission in drilling-spindle (morse): Mk5 Max drill capacity: dia 70 mm SPEEDS: 50 > 1004 rpm

2 Spindle Paper Drilling Machine

• Manufacturer: Hang (Constantin Hang GmbH) • Model: DT 106 (also known as 106 DT) • Machine Type: Paper Drilling Machine / Paper Punching Machine • Drilling spindles: 2 pieces, adjustable • Drilling diameter: 3 – 20 mm (standard up to 14 mm, optionally with hollow shank up to 20 mm) • Table size: approx. 110 × 68 cm (width × depth) • Max. drilling distance from the edge of the paper: up to 470 mm (face hole approx. 300 mm) • Max. stacking height: approx. 70 mm • Operation: Foot pedal (electric) • Connection: 380–400 V three-phase (3-phase) • Machine weight: approx. 250 kg • Condition: Used, technically checked, ready for immediate use

Inv. Num. : 8495 Type: WFQ 80 NCA Producer: TOS Generated: Parameters: Work table length: 1600 mm Work table width: 850 mm Maximum weight of the workpiece: 5000 kg X-axis travel: 1600 mm Y-axis travel: 1000 mm Z-axis travel: 950 mm Spindle diameter: 80 mm Machine weight: 22000 kg

4-Spindle Paper Drilling Machine Ideal 504

Radial Drilling Machine Z3050 x 16 I Spindle: Ø 80 mm Spindle exit: 300 mm Spindle speed: from 25 to 2000 RPM Arm travel: 1600 mm Year of construction: 1990 Column diameter: Ø 320 mm Maxi distance spindle nose/table: 1800 mm Mini distance spindle nose/table: 1200 mm Table useful dimensions: 1700 x 1000 mm Tailstock CM5 Hydraulic clamping trolley + arm + column Auto advance non-functional Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2400 x 1200 x 3200 mm Weight: approx 4 T

4 Kopf Bohrmaschine / 4 head Paper Drilling machine Josef Foellmer IRAM 400/445Serial-No. 2190

Papierbohrmaschine / Paper Drilling machine

Key data: 30 mm

HSS Drill Cassette MK 2 / MK 3 9 pieces, 14.5 - 30 mm HSS top quality with special hardening and precision grinding With Morse taper stock MK 2 or MK 3 according to DIN 228 MK 2 for drill bit Ø 14.5 / 16 / 18 / 20 / 22 mm MK 3 for drill bits Ø 24 / 26 / 28 / 30 mm Easy disassembly by means of expulsion wedge Set in PVC case

Manufacturer: Central Mine Equipment Model: 75 Year of Manufacture: 1972 Type of Machine : drill for geotechnics Km Count : 165208 kilometers Find more here - / Contact us at -

Key data: 15 mm, 95 °

Drill Bit Grinding Machine DBG 315 W Specifications: Grinding range drill Ø 2.1 - 15 mm Grinding range point angle 95 - 135 ° Speed 4400 rpm Motor power 0.12 kW Mains connection 230/50 V/Hz Length 320 mm Width 180 mm Height 190 mm Weight 10 kg Free-angle grinding function Cross-grinding function including 11 collets 3-13 mm Freight costs throughout Austria EUR 9.90 from stock

Offer 25234 Specifications: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Long spindle MK 3 - Drilling spindle speeds infinitely adjustable - Level 1 160 - 1125 rpm - Level 2 320 - 2250 rpm - Drilling spindle stroke 120 mm - Feeds 0.1 + 0.2 mm/rev - Projection 293 mm - Column diameter 115 mm - Table size 300 x 300 mm - With 2 T-slots 14 x 224 mm - Emergency stop button - Machine vise - 10 pcs HSS – drill bits 10 – 25 mm - Space requirement approx. W 500 x H 1750 x D 900 mm - Weight approx. 270 kg

Offer 24190 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 140 mm - 8 drilling spindle speeds 100 - 2900 rpm - Min. / max. distance drilling spindle / table 110 / 405 mm -Lighting - Keyless chuck - Coolant device - Machine vise - Machine base - Drive 400 V / 0.75 kW - Space required: W 400 x H 1250 x D 600 mm - Weight approx. 200 kg

Key data: 60 mm, 350 mm

Radial Column Drilling Machine RSBM 5/60 Standard equipment: - Keyless chuck B 16, 1 - 16 mm - Tapered mandrel MK 5 / B 16 - Reducing sleeve MK 5 / MK 4 - Tool set with expulsion wedge - Instruction manual / CE The RSBM 5/60 offers plenty of space for extra-large workpieces: - Cubature 630 x 500 x 720 mm - Spindle projection 350 - 1600 mm Specifications: Drilling capacity in steel 60mm Threading capacity M46 Spindle holder (turning spindle) MK 5 Speed range 25 - 2000 rpm Speed levels 16 Quill stroke 315 mm Quill feed stages 16 Quill feed 0.04 - 3.2 mm/rev T-slots, width (table/base) 22/28 mm Drill head stroke 580 mm Spindle projection 350 - 1600 mm Drill head rotatable ± 180 ° Quill spacing base 1220 mm Quill spacing table 0 - 720 mm Drilling table area 630x500 mm Drilling table height 500 mm Motor power 4000 W Lifting spindle drive 1500 W Mai ...

Column Drilling Machine PRECIS Ø 23 mm Cone CM2 Maxi diameter: Ø 23 mm Rotation: from 165 to 4400 RPM Table size: 390 x 190 mm Spindle travel: 100 mm Column diameter: Ø 120 mm Throat depth: 240 mm 2 speed motor Mini chuck/table height: 100 mm Maxi chuck/table height: 350 mm Manual descent Manual hydraulic lifting of the table Voltage: 380 V Width: 700 mm Depth: 1000 mm Total height: 1800 mm Weight: approx 800 kg

: ja : Hydraulische klemmung weight of the machine ca.: 3,3 t t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Quick-opening milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000speed max. 15000 rpm at 70% EDratio ratio 1:5Power transmission up to approx. 2.5 kWProduct dimension 110 mm (machine spindle to clamping nutTool holder MK4 with tightening thread M16Collets type OZ16 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mmWeight 6.5 kgGood condition; used

Table, Drilling and Tapping Machine IXION Type BT 15 GLMasch. No. Year of construction approx. 1975Drilling capacity 15 mmSpindle holder Cone holder B 16Threading from M 2.5 to M10Throat depth 200 mmPine stroke 90 mmTable size 285 x 220 mmColumn diameter 75 mmSpindle speed 320 - 1600 rpm. 4 stagesMotor power 0.55 kWNet connection 380 volts, 50 Hz- Spindle speed via 4 V-belt steps- equipped with FAHRION GH 10 tapping chuck- with guide cartridge for the thread pitch, operation without