hole drill used for sale

Bench drill WMW BT2 projection: 210 mm Distance table to drill chuck: 110 - 260 mm Table: 340 x 280 mm spindle speed: 355, 710, 1400, 2800 rpm spindle stroke: 80 mm spindle mount: MK2 with footswitch for right and counterclockwise rotation ! engine power: 1.1 kW 380 V On steel table used, tested ! Very good condition ! Dimensions: 530 x 650 x 1850 mm

Twist Drill RECA HSS Twist Drill Bit 29.75 - 50 mm MK Shank 29.75 / 32 / 35 / 37 / 38 / 39 / 39.75 / 42 / 44 / 44 / 46 / 50 mm 14 pieces used, tested !24 Dimensions: 500 x 400 x 150 mm

Electric Drill, High Frequency Tool, High Frequency Machines FINE DS 848 0.75 KW 420 rpm 200 V 300 Hz used ! Dimensions: 450 x 230 x 90 mm

Drill head, with drill and boring bit holder MIKROMAT spindle stroke: 60 mm i : 1:1 1 flange: Ø 156 mm Bolt circle: Ø 132 mm Cone: Ø 103 / 106 mm, 14 mm wide Drill and boring bit holder: size 25 TGL 30-1201 Accessories for coordinate boring machine BKoE 400 x 630/2PA 2 and BKoE 630 x 1000/1PA2 ! in wooden box used, tested Dimensions: 400 x 350 x 170 mm

Drilling Machine, High Frequency Tool, High Frequency Machines FINE ASs 848-1 0.75 KW 540 rpm 200 V 300 Hz with 2 - gear gearbox and direction changeover ! used, tested ! Dimensions: 470 x 230 x 90 mm

Drilling Machine, High Frequency Tool, High Frequency Machines FINE ASg 836 0.36 KW 420 rpm 200 V 300 Hz used ! Dimensions: 290 x 200 x 70 mm

Drilling Machine, High Frequency Tool, High Frequency Machines FINE DS 848 0.75 KW 420 rpm 200 V 300 Hz with 2 - speed gearbox ! untested ! Dimensions: 480 x 230 x 90 mm

Drill FEIN ASz 748b 0.5 KW 700 rpm 42 V connection cable approx. 20 m used, tested ! Dimensions: 600 x 600 x 100 mm

Drill, high-frequency tool, high-frequency machines FEIN ASz 848c 0.75 KW 1230 rpm 200 V 300 Hz connection cable approx. 9 m used, tested ! Dimensions: 470 x 300 x 130 mm

Diamond Core Bit, Core Drill Bit HILTI DD-BI 25/280 RC ( DD-BI25/280RC ) 250900 / 8 Ø 25 mm Depth: 280 mm New ! Dimensions(Package): 350 x 40 x 40 mm

Drill, High Frequency Tool, High Frequency Machines BOSCH 0 602 118 001 0.36 / 0.42 KW 200 / 265 V 150 / 200 Hz connection cable approx. 3.5 m used, tested ! Dimensions: 450 x 300 x 90 mm

Morse taper / drill chuck holder PAGUS MK5

Drilling machine, high-frequency tool, high-frequency machines BOSCH 0 602 102 001 0.16 / 0.2 KW 2300 / 3300 rpm / 200 / 265 V 150 / 200 Hz connection cable approx. 2.8 m used, tested ! Dimensions: 350 x 200 x 70 mm

Drill tailstock, deep hole drilling rig POREBA feed up to 900 mm support: bed center to wedge center 400 mm weight: 780 kg ! used ! Dimensions: 2000 x 1200 x 1400 mm

Twist drill WMW-WERKÖ HSS 9930 ( HSS9930 ) MK5 65,0 x 800 Ø 65 mm Dimensions: 960 x 65 x 65 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 Diameter: Ø 15.25 mm 420279016 Holder: Ø 32 mm K20 New ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm New ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 Diameter: Ø 15.25 mm 420279016 Holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Holder: Ø 32 mm New ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 without Delta Ground diameter: Ø 15.25 mm 420279016 holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207629 Diameter: Ø 12.25 mm 420279013 K20 Holder: Ø 32 mm New ! Dimensions: 170 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Holder: Ø 32 mm used, tested ! Dimensions: 180 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm

Internal Cooling Twist Drill DORMER A512 HSCO ADX 18.25 ( A512HSCOADX18.25 ) Diameter: Ø 18.25 mm Pickup: Ø 20 m New ! Dimensions: 200 x 20 x 20 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207628 Diameter: Ø 10.25 mm 420279012 K20 Holder: Ø 32 mm New ! Dimensions: 160 x 32 x 32 mm

Twist drill HOMMEL HSS, DIN 345, Type N, ( HSS,DIN345,TypN, ) Diameter: Ø 32 mm 10510287 New ! Dimensions: 340 x 38 x 38 mm

Twist drill bit with internal cooling DORMER A512 HSCO ADX 18.25 ( A512HSCOADX18.25 ) diameter: Ø 18.25 mm holder: Ø 20 m used, tested ! Dimensions: 200 x 20 x 20 mm

Drill Bit Insert FAHRION E34-MK1 4332163270553 inner cone MK1 New ! Dimensions: 87 x 46 x 46 mm

Twist drill GARANT 11580 HSS ( 11580HSS) Diameter: Ø 29 mm New ! Dimensions: 580 x 30 x 30 mm

Step drill with internal cooling GÜHRING diameter: Ø 25.0 x 14.5 x 17.0 mm solid carbide DK480UF shank: Ø 25 mm with internal cooling ! New ! Dimensions: 120 x 25 x 25 mm

Throughfeed Drilling Machine Weeke PKA3 Workpiece length up to 3000mm 6 x 2 drilling units vertical / from below 2 x 2 drilling units horizontal / from left and right side

Step drill with internal cooling GESAU diameter: Ø 14.5 x 23.5 / 120° x 25 x 110 ( Ø14.5x23.5/120°x25x110 ) shank: Ø 25 mm with internal cooling ! New ! Dimensions: 110 x 25 x 25 mm

Two head paperdriller Make Hang Model 136DK Year 1990 Details 2 head paper driller with fixed 80 mm distance with tabulator Operation Electric footswitch Available Direct

Step drill bit with internal cooling GÜHRING diameter: Ø 25.0 x 14.6 x 17.0 mm ( Ø25.0x14.6x17.0mm ) solid carbide DK480UF shank: Ø 25 mm with internal cooling ! ground !, Dimensions: 120 x 25 x 25 mm

Two head paperdriller Make Hang Model 136D Year 1970 Details 2 head paper driller with fixed 80 mm distance with tabulator Available Direct

Drill tailstock, deep hole drilling rig POREBA feed rate up to 1000 mm suitable for Poreba TPK-80 ! feed speed 1.2 to 100 mm/min with accessories ! used, tested ! weight: 930 kg ! Dimensions: 2400 x 1000 x 700 mm

Deep drilling machine SFT TBS200 for sale. Find more here - / Contact us at -

The INGERSOLL RAND TH60 drilling rig is a versatile and powerful machine designed for various drilling applications. It is built with robust construction, advanced technology, and a user-friendly interface, making it suitable for both onshore and offshore drilling operations. The rig offers high performance, reliability, and safety features to ensure efficient and productive drilling operations. Specifications: Water Well Rigs - 2002 international with Cat engine, 18 speed, new front tires . Rig is 1979 TH60 with 5x6 garner denver punp with new gear and pump end. 640" of new 89mm6.1m(20´) 12mm 2 3/8" IF rod, two new stabelizers, new murphy fast plug. Rig is direct hyd so no air over hydraulic. Less prob easy to fix! There is a portable pump to use due to highway weight regulations. Find more here - / Contact us at -

Radial drilling machine Commissioning on March 1st, 2023 Year of manufacture 2021 Fabr. WE KAMI Type: RKM5016 1 shift operation/5 day week To be delivered from: immediately Find more here - / Contact us at -

Manufacturer: KOVOSVIT Model : VO 50 Year of Manufacture: 1995 Condition: Used Weight (Kg): 4300 kg Find more here - / Contact us at -

Manufacturer: Peddinghaus Model: FDB 600 Type of Machine: Flat steel drilling and burning machine Find more here - / Contact us at -

Max. Drilling Diameter... 50mm Spindle holder ... ISO 50. Max. vertical arm adjustment ... 875mm Max. distance of the spindle axis from the stand ... 1250mm Main engine power ... 4kW Total power requirement ... 6kVA L x W x H ... 2750 x 1120 x 3271mm Machine weight ... 4550kg

Year of manufacture 1985 Paper Drilling Machine 4 drilling spindles Sliding table electr. Foot switch incl. base Price on request. We deliver and install worldwide!

bore capacity in steel St 60: 32 mm bore capacity in cast iron GG 20: 38 mm Drilling capacity in St 60: 40 mm threading in St 60: M 24 threading in GG 20: M 30 tool taper: Kurzspindel MK 3 spindle stroke: 120 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 515 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle-table min.: 117 / 701 mm feed: von Hand spindle turning speed - stepless: 160 - 2250 U/min total power requirement: 1,45/1,9 kW weight of the machine ca.: 260 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 50 mm

Heavy Gear Drilling Machine Head height adjuster above hand crank Rotary tables from - rpm 4 feeds

4 pieces new drill bits for double or quad drill dead drill machine, New, never used.

Key data: 50 mm, 800 1/min

Speeds infinitely variable from 40 - 800 rpm 4 drill feeds . Clearly good original condition

Specifications: Manufacturer: Charmilles Type: HD 30CNC Year of Make: 2004 Travel: X 300 mm Y 200 mm Z 300 mm Bore diameter range: 0.3 – 3 mm Depth: max. 200 mm Tool table Table dimensions: 500 x 300 mm Workpiece weight: max. 300 kg Mains connection Power Supply: 3/PE-380 V Fluctuation range: +10%/-15% Input power: 4 kVA Dimensions and weight: Dimensions: 1,340 mm x 900 mm x 1,940 mm Weight: approx. 1,200 kg Condition Condition: Used Functional: Tested and fully functional

Drilling capacity steel/GG: 15 mm Spindle holder: 1 MK Projection: 300 mm Table size: 210 x 300 mm Quill stroke: 110 mm Spindle speeds: 200 - 3000 rpm Drive motor: 380 V, 1.1 kW Space requirement: 850 x 420 x 1860 mm Weight: 220 kg