holding tank used for sale

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 30,000 litres Diameter: approx. 2,000 mm Length: approx. 9,940 mm Weight: approx. 5,500 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

tank plant, fuel oil tank, service filling station, diesel filling station, steel tank with 50,000 litres capacity - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 10.70 m - D = 2.50 m - weight approx. 9.5 to. - ex works, freely charged - We recommend: Above container from the outside sandblast, ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 25,000 litres Diameter: approx. 2,000 mm Length: approx. 8,390 mm Weight: approx. 4,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 20,000 litres Diameter: approx. 2,000 mm Length: approx. 6,840 mm Weight: approx. 4,000 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

25x 250 ltr. VA2 transport tanks / transport containers, slightly pressure-resistant, manufacturer: Umformtechnik Hausach, used, round standing, stackable (only empty recommended), dom above NW 125 with safety valve system Stöklin + 2x CO2 valve large NW 40 + small NW 25 system Stöklin, residual outlet with disc valve NW 50, operating pressure 0.9 bar, test overpressure 2 bar, pressure resistant for e.B. overlay with CO2 or CO2 impregnate, ideal also for refilling barriques, Weight/h.: 57 kg, cleaned inside, very stable design, can be driven under with pallet truck or e-ant Diameter: 0.62 m, H: 1.50 m, Price/hour: 550,- € plus VAT ex warehouse Dolgesheim

Various above-ground, double-walled tanks in sizes 5,000 / 7,000 / 10,000 / 20,000 litres Diameter 1,6000 and 2,000 mm

12,000 litres of mash agitator tanks with lateral agitator from V2A available: 5 pieces Dimensions: Ges. Height: approx. 3800 mm Zyl. Height: approx. 2150 mm Diameter: approx. 2350 mm Material: V2A - AISI 304, 1.4404 Surface: Inner IIID, outside 2B=IIIC Topsoil: - With cone bottom - With threaded fittings see photos Cylinder bottom: - with agitator mixer 1.1 kW on the side - with manhole 330 x 430 mm - with threaded nozzle DN 25 - with diving sleeve - with threaded nozzle DN 50 rear Underbody: - with pointed cone bottom - with 3 feet with calottes, height adjustable - with forward-drawn outlet DN 65

Storage for wine, beer, sparkling wine, water, fruit juices, fats, oils, etc. Content: 60 litres Dimensions and weight: Ges.Height: 760 mm Diameter: 370 mm Weight: 40 kg Material: V2A - AISI 304, 1.4301 Surface: Inside and outside 2B=III C Tank top: with manhole round DN 230 with 1 x handle Underbody: with residual drain with disc valve DN 25

2. Qty. 1 Second-hand process tank Mfc.: Glencore Volume: 280 m³ Built: 2009 Dia.: 6.0 m Height: 10 m Stopped: 2018 Material: AVESTA 2507 (Super Duplex Steel) Code: API - 650 Capacity: 280 m³ Useful Volume: 260 m³ Diameter: 6000 mm Overall Height: 10 000 mm Design: Atmospheric Pressure Service Temperature: xx Stored Product: Process Solution Density: 1.8 kg/dm³ Coating: According to plant Welding: According API 650 Radiography: According to API 650 Asset: Zinc Asturine Application: Leaching process (Acid + spend electrolytic returned – Acid from electrolysis) Construction Structural Element Thickness Material Bottom 10 mm AVESTA SAF-2507 Virolas 6/8 mm AVESTA SAF-2507 Internal 6 mm AVESTA SAF-2507 Ceiling 6 mm AVESTA SAF-2505 External stiffeners AISI-316 6 316Ti Screws A4 - 70

high-quality stainless steel tanks, standing on feet, made of V4A stainless steel Volume: 12.5 m3 Dimensions R26: 2.35 m x 4.30 m high incl. feet, with cooling grille and insulation Dimensions R25: 2.35 m x 3.10 m high incl. feet Dimensions R24: 2.35 m x 3.10 m high incl. feet

New oil tank 100,000 liters for sale. Above-ground heating oil tank system 100,000 litres, D=2,900 mm Above-ground tank systems from Dehoust according to EN12285-2 (CE), class B, tank type D, for heating oil. Cyl. Storage tank made of steel, double-walled, with filled control liquid Glymin NF (approval no. BAM 1.4/12481-5.1/6035). Standard with a Dom DN 600 with dome cover, gasket and screws. Container inside raw, outside all parts sandblasted and with simple primer. Incl. synthetic resin paint on the outside in RAL colour. Complete tank system equipped with: - welded-on saddle feet - optical leak detector type LAS, approval no. Z-65.24-381 including Test and control liquid for refilling. (up to Ø2000mm pre-assembled) - Tank fitting for heating oil (pre-assembled up to Ø2000mm), consisting of: Filling tube 2" with TW closure Suction combinatio ...

Storage tanks/ stainless steel tanks without pressure Volume: 10.000 liter UNI-FIN-FOR Measurement and Weight: Diameter approx. 2.050 mm cyl. Height approx. 3.000 mm Total height with feet approx. 4.540 mm Year: 1992 Material: Stainless steel, 1.4301 Wall thicknesses: sub-floor 3 mm, cylinder + upper floor 2.5 mm Tank with conical bottom Upper body: 2 crane eyes 1 flange connection DN 65 1 ventilation nozzle DN 100 with bend Cylinder tank: 1 manhole 440 x 340 mm at the top: 1 socket ¾ " Lover bottom: 1 outlet spout with bend pulled forward NW 40 Otherwise see photos and drawing

lying aluminium tank with inner coating with consoles Volume: 20 m3 Dimensions: 2.0 x 6.70 m long

Steel tank with inner coating (glass enamel) can be used above ground or underground Volume: 8.4 m3 Dimensions: 2.20 m x 2.50 m long

The scope of delivery includes: 01x stacking container, used Material color: hot-dip galvanized Total width: approx. 850 mm (outer- outdoor) Frame width: approx. 800 mm Usable width: approx. 780 mm Total height: approx. 580 mm (floor - OK crane eyelet) Frame height: approx. 540 mm Usable height: approx. 400 mm Underride height: approx. 100 mm Total depth: approx. 560 mm (outer- outdoor) Frame depth: approx. 480 mm Net depth: approx. 400 mm stackable: yes Crane eyelets: 4 pieces Diameter crane eyelets: approx. 40 mm Note: The stacking or transport containers may be bent. Furthermore, these dents, o. other have damage. The above price refers to the Pick-up price per piece!

Steel tank with inner coating, e.g. can be used as a fire-fighting water tank or rainwater tank with 2 x concrete consoles per tank Can be used above ground with consoles or (half) underground with anti-corrosion coating Volume: 290 m3 Dimensions: 4.50 m x 22.50 m On request: Fire brigade connections (according to German DIN standards)- ventilation, suction line, A-coupling, anti-vortex plate, etc. Inflow and overflow

Stock# U2422-2 Used vertical stainless steel AISI 316L aseptic pressure storage tank with a total capacity of 830 l by Schwarte-Milfor Sp. z o. o. (Poland) type Mieszalnik procesowy. Tank has a working volume of 700 l and is designed to operate at pressures ranging from -1 to 4 bar and temperatures up to 150 C. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 152 l and is designed to operate at pressures ranging from -1 to 3 bar and temperature up to 150 C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 850 mm, length of straight wall line 1,200 mm. The tank has a welded dished top equipped with an inspection manway with an internal diameter of 450 mm and 9 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outlet with a NovAseptic  ...

Storage Tank in V2A for wine, water, fruit juice, schnapps Capacity: approx. 1.200 liter Measurement: Total Height: 1730 mm Depth: 1150 mm Cyl. depth: 1000 mm Width: 730 mm Material: V2A Surface: Outside marbled, 2B=IIIC inside 2B=IIIC Upper body: With thread connection DN 50 Cylinder tank: With 1 manhole With level indicator with bar and scale Lower bottom: With outlet pipe pulled forward with butterfly valve DN 32 With 4 stable feet

Hot water buffer tank with insulation Year of construction: 2011 Condition: Used Specifications Connections: 4 screw-ins for immersion sleeves: inner diameter 1/2" 2 flange connections: inner diameter 80 mm 1 filling neck: inner diameter 1 1/4" Metrics Height: 3,550 mm (boiler only) Diameter: 1,198 mm Circumference: 3,765 mm Volume: approx. 3,982 m³ Operating pressure: max. 4 bar Weight: approx. 500 - 600 kg Insulation: 160 mm The buffer tank has been reworked on the outside with rust protection and 2 coats of paint. Transport can be arranged through our house on request! Price: € 3,900.00 plus VAT ex Grunow site (Brandenburg) (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Storage tank / beer tank / pressure tank with cooling jacket round of V2A Operating pressure: 0.99 bar, test pressure: 1.7 bar Quantity: 100+ Content: 17-00047-1L 800 litres 17-00047-2L 1000 litres 17-00047-3L 1,200 litres 17-00047-4L 1,500 litres 17-00047-5L 1,800 litres 17-00047-6L 2,000 litres Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with pressure lid 390 mm with 1 x threaded welding nozzle DN 50 with 1 x overpressure valve with 1 x CO2 connection with 6 x star grip screws Cylider tank: with cooling jacket with 1 x beading stiffening Underbody: with forward-drawn outlet pipe DN 50 with disc valve with 4 stable feet can be underrun with pallet trucks

Cold water tank, second-hand, Fabr. Gresser, net capacity: 400 hl; Total capacity: approx. 427 hl, in chrome-nickel steel 1.4301, insulated with 150 mm PU foam and covered with trapezoidal sheet metal, standing on a concrete base, for pressure-free operation, Brewing water tank, used, Fabr. Gresser, net capacity: 250 hl, total capacity: approx. 265 hl, in chrome-nickel steel 1.4301, insulated with 150 mm PU foam and covered with trapezoidal sheet metal, standing on a concrete base, for pressure-free operation, Extrusion Storage, Fabr. Gresser, total capacity: 169.20 hl, operating overpressure: 6 bar, in chrome-nickel steel 1.4404/1.4571, insulated with 150 mm PU foam and covered with trapezoidal sheet metal, standing on a pedestal frame, Ø: 2,140 mm, total H: 7,673 mm,

Storage Tank/ Pressure Tank/Beer tank 2400 liters in AISI 304 with cooling jacket Test pressure: 1,5 bar, Operating pressure: 0,99 bar - NEW Material: V2A – AISI 304 (1.4301) Operating pressere: 0,99 bar Surface inside IIIC Operating temperature in °C: 130 Upper body: Manhole lid round DN 400 with 6 screws With 1 Thread connection DN 50 and with handle bar With CO2-connection (extra charge) With overpressure valve (extra charge) Tank cylinder: With cooling jacket With connections for cooling jacket on the back inlet 1” AG, outlet 1¼”AG With connection for sample valve DN 15 ( sample valve - extra charge) With connection for temperature indicator 3/8 (temperature indicator - extra charge) Lower bottom: Rest outlet with butterfly valve DN 50 with conical bottom On 4 stable feet Easily movable with a m ...

17,000 LITRE STORAGE TANK/WINE TANK, RIEGER, UPRIGHT MADE OF V2A https://eurolux.de/product/24-0513euba-17000-liter-lagertankweintank-r ieger-stehend-aus-v2a MJ UNI-RILL Tank top floor: Sloping floor with 3 % floor slope 4 reinforcement profiles 2 crane eyelets Threaded socket DN65 reduced to DN50 central downward drawn CIP cable DN50 connection DN 50 front Cylinder: Level indicator with strip and scale Tasting tap DN25 Clear drain with angled seat valve DN 50 Tank underbody: Cone bottom with residual drain pipe pulled forward in the middle with disc valve DN 50 tank wall 4 feet with domes - height adjustable with washers

52,700 LITRE WINE TANK / STORAGE TANK, EXTINGUISHING WATER TANK, ROUND, MADE OF STEEL https://eurolux.de/product/24-0504euba-52700-liter-weintank-lagertank- loschwassertank-rund-aus-stahl MJ UNI-RILL Surface coated on the inside, food-safe Volume 52700 L Steel as a material Total height 9700 mm Cylinder height 9100 mm Diameter 2700 mm Vertical design Last Use Food Tank top floor: arched bottom 2 crane eyelets Nozzle DN50 Cylinder: Manhole Ø 410 x 310 mm oval Tasting tap DN15 Clear drain DN50 Tank underbody: Flat bottom with 3 % slope with outlet beading pulled forward with reduction to DN 50

9,500 LITRE STORAGE TANK/WINE TANK MADE OF V2A, WITH STURDY FRAME FRAME, LONG OVAL https://eurolux.de/product/24-0505euba-9500-liter-lagertank-weintank-a us-v2a-mit-stabilem-rahmegestell-langovalliegend Specifications Surface inside 2B=IIIC sanded Surface marbled on the outside Material V2A (AISI 304) 1.4301 Width 1730 mm Total height 2750 mm Depth 3700 mm Oval-horizontal design Number of feet 4 Last Use Food AS UNI-RILL Front: Level indicator with strip and scale (connection) Manhole oval 400 x 350 mm Tasting tap 1/2" Airlock DN 50 Clear drain DN 50 Residual drain DN 50 height-adjustable feet with domes and washers

40m3 storage tank for AHL/ASL - steel tank used storage container 40,000 litres capacity for storage of liquid fertilizer / AHL / ASL with brand-new plastic inner shell The container corresponds to DIN 6616, has 2 saddle feet, an ascent ladder and is professionally emptied and cleaned inside. D = 2.50 m - L = approx. 8.70 m. The container receives a brand new plastic inner shell - resistant to the storage of liquid fertilizers - incl. leak warning device mounted in the protective box - see sample photo. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore used for the storage of liquid fertilizer AHL nox reducing agent AUS 32 (AdBlue). The container is completely ground on the outside, re-primed and repainted in desired colour according to RAL. The price is ex works - freely charged. Delivery time = by arrangement.  ...

Liquid fertilizer / AHL / ASL - Tank tank storage tank storage tank a used storage tank 100,000 litres for storage of liquid fertilizer / AHL / ASL with a brand-new plastic inner shell. The container corresponds to DIN 6616, has 2 saddle feet, is professionally emptied and cleaned inside, incl. ladder. The container receives a brand new plastic inner shell - resistant to the storage of liquid fertilizers - incl. leak warning device mounted in the protective box - see sample photo. ASL (ammonium sulfate solution) is a sought-after liquid fertilizer used in drying plants during the drying of liquid fermentation residues and during exhaust air purification. Due to the corrosive properties of the bearing medium, ASL containers require an inner plastic shell. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore AHL for the storage of ...

P134 - used approx. 40 m³ / 40,000 L polyester tank, GRP tank, lying on steel bases, good condition. Technical details: Capacity: approx. 40 m³ / 40,000 litres Material: Polyester / GRP Manufacturer: Reich-Tank Dimensions: approx. Ø 3.00 m × L 6.50 m / H incl. base 3.70 m Miscellaneous: Used polyester tank, professionally cleaned and in good condition. Above-ground tank on 2 steel bases, dome and all connections on top of the tank body. Pictures from the inside will follow. Only the pure tank is sold, without attachments such as pipes, fittings and accessories. The tank can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam trays, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc. Price on request. Transportation can be arranged at a reasonable price. It is not possible to update all our  ...

The brand new container corresponds to DIN 6616, has 2 saddle feet, an ascent ladder and is primed on the outside - on untreated sheets. D = 2.50 m - L = approx. 10.70 m. The container receives a brand new plastic inner shell incl. leak warning device mounted in the protective box - see sample photo. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore used for the storage of liquid fertilizer AHL nox reducing agent AUS 32 (AdBlue). The price is ex works - freely charged. We recommend: Above containers sandblasting from the outside, prime and completely repaint - iron grey / RAL hue. (On request, other RAL colours are also possible!) ASL (ammonium sulfate solution) is a sought-after liquid fertilizer used in drying plants during the drying of liquid fermentation residues and during exhaust air purification. ASL container  ...

120,000 liters extinguishing water tank/storage tank/steel tanks/water cisterns Storage tanks/ steel tanks/ extinguishing water tanks/ water cisterns with red food-safe coin coating Capacity: 120,000 litres UNI-BWK Cat. No. 24-0579EUBA Link to product: https://eurolux.de/product/24-0579euba-120000-liter-loschwassertanklag ertankstahltankswasserzisternen Dimensions and weight: Ges. Height: 17,200 mm cyl. Height: 15,230 mm Diameter: 3,100 mm Topsoil: With curved bottom With 4 crane eyes With 2 connection sleeves 1" With 1 connection sleeve 2" With central flange DN 150 With manhole DN 200 With 1 retaining tab for running platform Cylinder: With manhole 430 x 340 mm with swing cover with bracket With Temperature Gauge Nipple 1" With Sample Tap Nipple 1" With clear drain DN 65 Subsoil: With curved bottom With outlet pipe DN With ...

We sell the Kaeser SK 25 screw compressor, as a set including compressed air tank and refrigerant dryer The condition of the compressor can be seen in the attached pictures. The unit has been well maintained and is fully functional. Operating hours: 12,324h run and 2,317h load Last inspection 09/22. Until next inspection 1,029h load Technical details: -Operational -Fully automatic - Very soundproofed - Vibration damped - All panels powder-coated - For ambient temperatures up to +45 °C - Easy access to all service points thanks to removable left cover SIGMA CONTROL 2 Specifications: - Working pressure: 7.5 bar - Flow rate: 2.50m³/min - Maximum operating pressure: 8 bar -Rated power: 15.0 kW -Engine speed: 2960 rpm -Ambient temperature: 3 °C to 45 °C

4 cyl.-con. Yeast tanks, make BAM, each with 53,88 hl content, 1,5 bar working overpressure, standing on 3 feet (1 foot on weigh cell), in stainless steel mirror polish design, with 3 cooling zones (2x wall and 1x cone), with screwed swiveling cone point, magnetic agitator in cone, ladder hanger at top, Ø: 1.800 mm, H: 2.900 mm. Price: 8.000 € each tank, free load on truck

Used vertical stainless steel tank with jacket, 7000 L volume. Pressure: 0 Bar tank, 6 Bar jacket. Jacket volume 32,5 L. Motor EX, agitator.

500L EMULSIFYING MACHINE 1. Capacity: 500KG/batch 2. Agitator: 5HP x 415V x 50Hz x 4P. TECO induction motor. Output speed 0 to 110 RPM. 3. Tank: Full capacity 640L, Mixing capacity 150 to 500L, SUS 304 heater 6kx4 unit. Max product heating temp 950C 4. Lobe pump: 2HP x 415V x 50Hz x 4P speed 1500L/Hr 2 bar. 1000L EMULSIFYING MACHINE 1. Capacity: 1,000KG/batch 2. Agitator: 7.5HP x 415V x 50Hz x 4P. TECO induction motor. Output speed 0 to 120 RPM. 3. Tank: Full capacity 1300L, Mixing capacity 300 to 1,000L, 4. Lobe pump: 2HP x 415V x 50Hz x 4P speed3000L/Hr 2 bar. 5. Material machine: Contact Part (inside tank) SUS 316, others SUS 304 6. Thickness: ≥3mm

- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is fitted with the following fittings equipped: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 to. - ex works, freely charged - The container is sandblasted from the outside, primed and completely repainted - iron grey / RAL hue. (On request, other RAL colours are also possible!) general: You will receive an invoice with  ...

- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 10,00 m - D = 2.00 m - weight approx. 5.9 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repainting - traffic grey / RAL hue. (On request, other RAL colours are also possible!) general: The price fo ...

40,000 litres of earth tank for storing rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,50m - L = 8,70m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 14319 and A-deck capsule according to DIN 1 ...

Storage tank 5,000 liters standing from V2A used – in very good condition Dimensions and weight: Ges. Height: 6850 mm Cyl. Height: 6020 mm Diameter: 1080 mm material: V2A - AISI 304, 1.4301 surface: Outside and inside IIID Topsoil: with klöpper bottom above with thread DN 65 central cylinder: with pipe pulled down with tasting tap with manhole oval 300 x 400 mm with bracket and holder with 2 x clear drain with inclined seat valve with thread DN 50 subsoil: with klöpper bottom with forward pulled outlet pipe with disc valve DN 50 with 3 calotte feet height adjustable

T9 - used approx. 20 m³ / 20,000 ltr steel tank with coated inside, standing upright. technical details: capacity: approx. 20 m³ / 20,000 litres material: steel tank with inner coating dimensions: Ø approx. 2.55 m × total height approx. 5.70 m Used steel tank with inner coating, professionally cleaned and in good condition. Standing, above-ground storage tank on 4 steel feet, lid on top of the roof and down at the tank bottom, several inlets and outlets. Steel rack and matching ladder available at an additional cost. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertise ...

Capacity 160 l, Stainless steel version, with lid Electric heating with temperature controller (30 to 80°C) With limiter 95°C, Outlet valve. With electric cabinet and motor START-STOP With propeller agitator, motor 0.37kW, approx. 300rpm Space requirement 600 x 600 x 1500 mm high, weight approx. 250 kg Already outdated, short-term from stock. (In the photo still with the saline solution for the TEST in the container)

The container can be used as a water tank, extinguishing water tank, extinguishing water tank, extinguishing water retention tank, rain retention tank, retention tank, retention tank, rainwater retention, rain storage tank, retention ecister, cistern, etc. Dimensions: D = 2.50 m - L = approx. 8.70 m The container has two saddle feet, a manhole DN 600 with dome lid, is used and emptied inside and professionally cleaned. On request, the container can be completely equipped with an extinguishing water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - consisting of: - 1 suction line DN 125 with A-fixed coupling according to DIN 14319 with special closure for fire brigade tricant keys incl. a ball valve 4", - 1 pcs. sleeve incl. ball valve welded into the highest point of the suction line (for ven ...

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

85,700 litre wine tank/storage tank RSM, round, made of V2A Cat No.: 24-0149 Condition: New Pieces: 5 KK UNI-ACKER Dimensions: Overall height: 12,850 mm Diameter: 3,000 mm Sheath height: 12,000 mm Thickness: Bottom 3 mm Sheath 3-2 mm Lid 3 mm composed of: Flat floor for concrete base 3% inclined incl. ground anchoring ring in accordance with European regulations in the event of earthquakes and storms (parts of the anchor ring must be welded on site by the customer). Nozzle DN100 DIN 11.851 in the lid (for mounting light on the customer's side, light not included) Dome Ø 400 mm in 1.4404 with jointvery stable Solid door Laveggi A4 (edge thickness frame 12 mm) without swivel arm Double-jacketed laser-welded 2xh 1250x9330 à 8.75m2 with parallel connection 2" Connector Thermometer connection NW20 with sleeve Cleaning line NW 50 with connection  ...

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. General characteristics: Material Stainless steel Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 700X860 mm Outer diameter body 805 mm Body height 1040 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 400 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. Specifications: Volume 550 liters total (400 useful) Background type Sup. klopper - Conical Inf. Envelope Structure 850x890 mm Outer diameter body 800 mm Body height 880 mm

horizontal steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater Volume: 35,000 L Dimensions: Ø 2.50 × 7 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. Specifications: Volume 550 liters total (500 useful) Background type Sup. klopper - Conical Inf. Envelope Structure 850x890 mm Outer diameter body 800 mm Body height 900 mm