hol monta used for sale

Bread refrigerated trolley stainless steel with wooden supports with 10 wooden supports on castorsDimensions :Height: approx. 183 cmWidth: approx. 127 cmLength: approx. 42 cm See pictureShipping costs please ask for

Rolling Dough Corrugated Woodâ€" Rolling Pin - Rolling Pin with Wooden Handles 450 mm( 2 Pieces )Solid Beech Wood Heavy Commercial Professional QualityRoller Width: 450 mmDiameter: 90 mmWeight: 2090 gWith Smooth-Running Stainless Steel Ball BearingsDetails see picture

Rolling Dough Corrugated Woodâ€" Rolling Pin - Rolling Pin with Wooden Handles 400 mm( 2 Pieces )Solid Beech Wood Heavy Commercial Professional QualityRoller Width: 400 mmDiameter: 90 mmWeight: 2090 gWith Smooth Running Stainless Steel Ball BearingsDetails see picture

NEW Machine Paper size max 54 ? 72 cm Paper size min 180 ? 300 mm Paper sheet thickness 0.90 mm Foil-pulls &, programs Standard 2 ? upgradable to 4 Heating zones 6 for optimal temperature allocation Available in following sizes: 38 x 52 40 x 58,5 56 x 77 56 x 82 64x90 Optional: Hologram unit Delivery time: 3-4 Month after order

Dimensions (L/W/H): 1817 x 578 x 2115 mm Filter capacity: 4,4 m² Number of filters: 2 St. Number of dust containers: 2 St. Weight: 74 kg Dimensions (L/W/H): mm : 160 mm : mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

On offer is a used counter-pressure bottle filler from the manufacturer Holdefleiss. As you can see in the pictures, the fountain pen is in a well-maintained and well-maintained condition and has been used in a small brewery so far. Technical data: - Manufacturer: Holdefleiss - YOC 1971 - 24 filling stations - Crown cap with 6 stamps - Height of the bottle plate to the centering bell filling device: 30 cm - Format: Euro bottle, NRW The bottle filler comes with extensive spare parts when you buy it. The technical documentation for the filler is also all available. If you have any further questions, please feel free to contact us.

I am selling a panel sizing saw HOLZMA HPP380/38/38, built in 2008. Cutting surface 3800x3800mm. Cutting height 90mm. Max saw blade diameter 380 + 200mm Joint area W.5867mm x D.6637mm 8 pcs gripper with pneumatic regulator Side positioning roller from below. Cadmatic 4.0 optimization software included. Very good condition. Available the same.

I am selling a panel sizing saw HOLZMA HPL380/38/22, built in 2007. Cutting surface 3800x2200mm + rear lift table. Cutting height 90mm. Max saw blade diameter 380 + 200mm Joint area W.5924mm x D.9963mm 8 pcs gripper with pneumatic regulator Side positioning roller from below. Cadmatic 4.1 optimization software included. Very good condition. Available the same.

Wood Her Auriga 1308 FU + PU Compact design - edge thickness 0.4 - 6 mm PLC Screen Control Edge-Control PPC 221 Color Screen Pre-milling unit for attaching in front of the glued part Fully automatic edge magazine for roll and strip goods Glu-Jet EVA and PUR Glue Cartridge or Granules + PU Adhesive application using nozzle technology Workpiece height 6-65 mm autom. Glue height adjustment Printing unit 1912-3 pneumatic Cross-cut unit 1918 pneumatic for rolls and strips up to 8 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit 1827 MOT 4, flush milling 8 mm, radius milling - chamfer milling - 15° 1827 MOT NC axes via control panel Shape milling unit 1832 SPS Rounding of corners up to edge thickness 3mm in continuous flow Scraper unit for chamfers and radii with 2 scraper carriers MOT Surface Scraper Unit - Finish Spraying Device  ...

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Milling unit: unfortunately no type designation -Motor: 2x Holz-Her 2200 W / 2800 rpm -Drive belt: not included -Motor block: dimensions 400/340/300 mm -Milling unit: 530/440 / H300 mm -Weight: 81 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Case: slight damage, see photos -Trimming unit: for trimming the protruding edges on the front and rear edge -Adjustment range: 400 to 840 mm -Clamping: pneumatic -Motors: Holz-Her 750 W / 2600 rpm -Saw blade: Ø 160 mm -Dimensions: 1010/450 / H540 mm -Weight: 94 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Manufacturer: Holex, soft attachment jaw set, 3-piece, 315 -Type: 313310-315 -Width: 35 mm -Dimensions: see photo technical drawing -Overall dimensions: 145/105/H55 mm -Total weight: 5.2 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Number: 1x motor -Motor type: -Power: kW -Voltage: 380 volts -Tool holder: SK40 -Spindle speed: 9000 rpm -Dimensions: 340/270/H400 mm -Weight: 35 kg

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Manufacturer: Holex, malleable cast iron screw clamp 600 x 120 mm -Article No.: Hoffmann 860100 600 -Wingspan: approx. 600 mm -Clamping depth: approx. 120 mm -Number: 3x screw clamp available -Price per piece -Dimensions: 700/190/H40 mm -Weight: 3.1 kg/piece

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools, malleable cast iron screw clamp -Manufacturer: Holex, malleable cast iron screw clamp 300 x 140 mm -Wingspan: approx. 300 mm -Clamping depth: approx. 140 mm -Number: 2x screw clamp available -Price per piece -Dimensions: 400/210/H40 mm -Weight: 2.1 kg/piece

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools, malleable cast iron screw clamp -Manufacturer: Holex, malleable cast iron screw clamp 250 x 120 mm -Wingspan: approx. 250 mm -Clamping depth: approx. 120 mm -Quantity: 1x screw clamp available -Dimensions: 340/180/H30 mm -Weight: 1.5 kg.

Saw unit, saw unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit, HOLZ-HER -Engine: H.Hug Type CEI PLF 850 -Power: 2.9 kW -Speed: 2880 rpm -Cutting height: max. 80 mm -Dimensions: see photos -Transport dimensions: 700/630/H780 mm -Weight: 60 kg

Lifting tipper, forklift tipping container, tipping container, tipping trough, forklift trough, -Manufacturer: holac, tilting device made of stainless steel -Use: for food or food industry with height-adjustable tilting function -Set tilting height: 2000 mm (can be changed to max. approx. 2500 mm for an additional charge) -Total height: 2960 mm -Individual components/dimensions: see photos -Transport dimensions: 2960/600/H1630 mm -Weight: 470 kg

roofing nails, strip nails, nail strips, roofing nail rolls, coil roofing nails -Manufacturer: Holz-Her, roofing nails, nail rolls, 1 started box/ total approx. 7000 pieces -Type: 3.0x25 A2 stainless steel -Price/Delivery: complete -Transport dimensions: 490/300/H140 mm -Total weight: 12.7 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer -Manufacturer: Holac, knife set for meat cutter multi-purpose cutter dicer -Type: various versions, see photos -Price/Delivery: complete -Transport dimensions: 590/390/H220 mm -Weight: 71 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 50 mm see photos -Bolt circle: Ø 75 x 6 mm -Price/Delivery: complete -Dimensions: 328/190/H8 mm -Weight: 1.2 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: various versions, see photos -Art.No.: 6x 2334850 / 3x 2334830 / 1x 2335190 thickness 1.6 / 1 / 2.7 mm -Price/Delivery: complete -Transport dimensions: 375/111/H20 mm -Weight: 1.6 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: 3 cutting blades, see photos -Hole: Ø 30 mm -Dimensions: 430/310/100 mm -Weight: 22.9 kg

HOLZ-HER -used PC system with touchscreen, label printer, for mounting on a vertical panel saw, USB port, network connection, incl. office version OPTI-V-Base

HOLTEC STIHL ES 121 SHKA Parcel Cross-Cut Saw 2001/2021 With approx. 15m roller conveyor, as good as new! The ES121 F/SHK is the simplest solution for precise end cuts – even from unedged and gap-stacked goods. Cutting with the positionable saw unit They rest parcels to the desired length. This system is also ideal for users with a small footprint. Guide rail swivels hydraulically at a 90° angle around a fixed pivot point Max. cutting accuracy and optimal cutting force distribution with hard chrome-plated pointed tooth chain or carbide-tipped pointed tooth chain from the Home STIHL available HOLTEC guide rail (stellitated on both sides – four-way reversible) ES 121 with roller conveyor and stationary sawing unit – the classic cut for dividing long packages into fixed lengths By means of a movable trolley, the packages are positioned exactly to t ...

CIP plant for Seitz combifilter Year of construction: 1990 The manual system consists of caustic tank, heat exchanger and circulation pump., Additional title: with a heated CIP tank, CIP-Tank: 1500 l, Features: CIP tank, tube bundle heat exchanger, pump, piping

Manufacturer: Arnold Holstein Consisting of: Packing press type H65: Capacity: 1,200 kg/h Efficiency up to 75% 24 press inserts (65 x 65 cm) 22 pressing cloths (100 x 100 cm) Dimensions: 2,330 x 840 x 2,060 mm Fruit conveyor Pasteurizer Profi PA SH: Capacity: 600 l/h 48 kW heated with gas Automatic temperature controller V4A Dimensions: 2,100 x 880 x 1,300 mm Bag-In-Box dosing machine Profi Capacity: 600 l/h including weighing unit bags with up to 10 l, Additional title: Juice bottling incl. fruit reception and processing, Capacity pasteurizing/filling: 600 l/h, Capacity press: 1200 kg/h, Power: 1,5 kW / 48 kW, Features: Fruit conveyor with water bath / shower and shredder, packing press type H65 - 1,200 kg/h, efficiency 75%, 22 pressing cloths, 2.33 x 0.84 x 2.06 m; pasteurizer Profi PA SH - 600 l/h, 48 kW, 2.1 x 0.88 x 1.3m; gas burner; automatic dosing unit - 600 l/h, incl. weighing u ...

Insulated and clad stainless steel tanks standing on upright frames, each with three frame cooling zones and one cone cooling zone., Additional title: outdoor tanks, Volume: 1700 hl, Operating pressure tank: 1 bar, Operating pressure cooling: 4 bar, Test pressure: 1 bar, Width: 3,8 m, Height: 18,1 m, Weight: 13 t, Material: Stainless steel 1.4301, Position: Vertical, Base construction: Skirt, Features: PT100, full and empty detection probe, 4 cooling zones (3 frames, 1 cone, 42 l, 42 l, 126 l, 35 l), safety valve

This PARAMIX system is used to produce high- and low-carbonated beverages. The process comprises the following steps: 1. Degassing of the water, 2. Dosing and mixing of water and syrup, 3. Carbonation of the finished mixture. The system was retrofitted by FAMIX in 2009 and expanded to include the following components: - CO₂ impregnation unit - CO₂ pressure-temperature ratio regulator type BMS7 The regulator, including the control cabinet, is to be completely renewed again when the device is purchased. The system is ideal for the reliable and flexible production of a wide variety of soft drinks. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: mixing unit 1983 - 2010, Capacity approx.: 15000 l/h Mixing and carbonating, Length: 2,9 m, Width: 2,5 m, Height: 2,5 m, Weight: 3000 kg, Operation / Control: mix ...

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; plastic edges: 0,4 - 3 mm; solid wood edges: 0,5 - 5 mm; Workpiece thickness: 8 - 50 mm; Minimum length of workpiece: 120 mm; Min. work piece width: 110 mm; Anti-adhesive spraying unit: yes; Edge preheating device: yes / with ceramic infrared lamp; Bonding unit: granulat / Glue container quick-change kit; Jack knife: yes; Flush trimming unit: yes; Corner copy unit: yes; Flush radius milling unit: yes; Radius scraper unit: yes; Area scraper unit: yes; Buffing unit: yes; Cleaning spray unit: yes; motor power: 5 kW; machine length: 3774mm; machine width: 1546 mm; machine height: 1337mm; weight: 842 kg; Top equipment for high productivity with low space requirements! Intuitive operation with the eye-S control and 10 large touchscreen: - HMI Maestro Active Edge - Graphic display of all processing units ...

rolls: 4; speed: 2 - 30 m/min; number of speeds: 2 Getriebe, 2 Motor, 2 Zahnrad-wechsel (8);

: neu : 2026 : 080147 : prompt, Zwischenverkauf v : Slowakei : 26400 € : 504.24 € : 1 : 40 to : 1500 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 2000 mm : 950 mm : 1900 mm : 1800 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 28300 € : 540.53 € : 40 to : 2000 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 2500 mm : 1200 mm : 1900 mm : 2100 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 25400 € : 485.14 € : 40 to : 1250 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 1750 mm : 950 mm : 1900 mm : 1640 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 23700 € : 455.04 € : 40 to : 800 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 1750 mm : 950 mm : 1900 mm : 1640 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Material lift: assembly lift lift with cable winch -Load capacity: max. 226 kg -Lifting height: convertible, max. 6.09 m -Equipment: with winch and standard fork -Dimensions: 1700/660/H1360 mm -Own weight: 87 kg

Straightedge, straightening rail, steel ruler, assembly ruler, assembly straightedge, straightedge -Assembly ruler: made of profile steel -Type: DIN 874 Normal -Dimensions: 503/41/H80 mm -Weight: 9.4 kg

Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Manufacturer: MO Weidmann, material lift assembly lift -Load capacity: max. 225 kg -Lifting height: max 1.78 m -Equipment: with winch, with standard fork -Dimensions: 1240/690/H2230 mm -Own weight: 76 kg

Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Material lift: assembly lift lift with cable winch -Load capacity: max. 226 kg -Lifting height: max 1.77 m -Equipment: with winch, with standard fork -Dimensions: 1700/690/H2230 mm -Own weight: 73 kg

CNC drilling line Brand: Alberti Type: Syncro-Plus New machine Line with 5 controlled axes for vertical drilling from below. Options also allow grooving, milling and insertion of fittings. This Syncro line can be very well combined with the BMF series of Alberti. Autom. or manual loading with longitudinal workpiece transport Monolithic frame in welded strong steel Independent control of all axes with drilling cycle optimization 5 independet asex X1 Feed rate belt conveyor, 100 m/min X2 Control of reference stops, 55 m/min. X3 Workpiece transport control in relation to the workpiece width, 15 m/min. Y Drill head control, 45 m/min Z Machining depth control, 10 m/min Remark: Max. Workpiece dimensions: 3000x900x30mm Min. workpiece dimensions: 300x130x12mm Geometry of workpieces: Length > Width / Length = Width / Length < 20% Width. Machining head: 1 vertical  ...

Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Manufacturer: Genie, Superlift Contractor SLC-18 -Load capacity: max. 295 kg -Lifting height: max 5.1 m -Techn. Data: see photos -Equipment: with winch, with standard fork -Dimensions: 1880/800/H2170 mm -Own weight: 151 kg

Auction-ID: A1-41275-212

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.

Used nipple holders Nipple holder with internal voltage, up to 2", self-exciting

Quick change tool holder, tool holder head, quick change tool holder -Quick change toolholder holder: without tension clamp -Manufacturer: Multifix -Size: D -with mounting for: mounting on the support -Dimensions: 278/250/263 mm -Weight: 33 kg

Steel holder, clamping plate with T-slot, wedge holder -Steel holder: wedge holder -Shot size: 50 - 60 x 23 x 100 mm -Dimensions: 175/165/H215 mm -Weight: 12.3 kg

Rotatable mounting, 40 slots Auction-ID: A1-45714-25

Rotatable mounting, 40 slots

Control voltage 220 V