127,239 used machines on RESALE, but how to find them? Machine Search
Tool holder, reducing sleeve for MK tools with tightening thread BENZ GmbH D 45 x 4 x 90 ( D45x4x90 ) 024.064 4 90 SK 45 Tool: MK 4 Dimensions: 173 x Ø 83 mm New !' Dimensions(Packing): 240 x 90 x 90 mm
Tool holder, reducing sleeve for MK tools with tightening thread BENZ GmbH D 45 x 1 x 45 ( D45x1x45 ) 024.064 1 45 SK 45 Tool: MK 1 Dimensions: 128 x Ø 83 mm New !' Dimensions(Packing): 240 x 90 x 90 mm
Tool holder, combi milling cutter mandrel / BENZ GmbH D 50 x 27 x 63 ( D50x27x63 ) 042.231 27 82 SK 50 mandrel: Ø 27 mm Dimensions: 220 x Ø 98 mm New !' Dimensions(Packing): 260 x 120 x 120 mm
pressure: 55 t punching cross-cut in cmm: mm stroke: 37 Min./20 mm throat: 500 mm stroke: max. 60 mm work height max.: 1060 mm total power requirement: 5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling tool holders: SK40 16 pieces -Type: various designs, see photos -Price/Fee: complete -Transport dimensions: 400/300/H150 mm -Total weight: 37.7 kg
Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder, tool holder -Quick-change tool holder: Quick-change turning tool holder -Recording dimensions: see photos -Tool holder: MK4 -Dimensions: 115/70/H100 mm -Weight: 1.5 kg
Tool holder, reducing sleeve for MK tools WMW C 45 x 5 x 185 ( C45x5x185 ) TGL 27260 SK 45 Tool: MK 5 Dimensions: 268 x Ø 80 mm New !' Dimensions(Packing): 290 x 120 x 110 mm
amount: 18 STK - for workpiece clamping on lathes, grinding machines and dividing headswith high concentricity and holding force - for workpiece clamping (bar or chuck work) in conventional conventional single-spindle lathes and CNC lathes directly in the spindle the spindle or in the collet chuck - Smooth bores are mainly used in the counter spindle of CNC lathes - Price as a set = 18 pieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Note ; without lot numbers 95 and 96 Auction-ID: A1-48232-97
Note ; without lot numbers 96 and 97 Auction-ID: A1-48232-95
Note ; without lot numbers 95 and 97 Auction-ID: A1-48232-96
Revolver hole punch, with 12 stations, D in mm 35 x 4/47/50.5 x 14/8 x 37/48/ and other punches and dies Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Punching force: 25 t Punching capacity: D 50 in 3.5 mm Sheet thickness: 3 mm Colour: grey Total power requirement :16 A Machine weight: 3500 kg Projection: 700 mm Dimensions: 120 x 80 x 250 mm Punching diameter: 55 mm Machine Number: 18439-464
WITHOUT cabinet Auction-ID: A7-48588-27
Offer 25086 Specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Profile steel shears - L- and T-irons at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notches - With square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 100 t - Projection 510 mm - Stroke approx. 10 to 50 mm - Perforates in steel up to Ø 31 in 25 mm - E. contact stop - div. 10 pcs. punches + dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg
Fully automatic bottle display with format star for e-liquid bottles, output approx. 30-40 cycles / min.
Max. travel speed: approx. 50 m/min Auction-ID: A1-48235-3
1x Rotec ø 19-92mm, 1x Bahco ø 15x83mm, 1x Hitachi ø 22-82mm Auction-ID: A1-48235-60
Manufacturer: Rapid, Type: Astglochbohrmaschine, Number of drilling spindles: 3 Spindeln Schnellkwechsel, Aperture/throat mm: 600, Units - total: 1, Main engine kW: 0,75, Drill feed - pneumatically: hand, Milling spindles vertical: 80 mm,
core drilling diameter max.: 32 mm bore depth: 1150 mm swing diameter: mm weight of the machine ca.: 12 t total power requirement: kW dimensions of the machine ca.: m Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschi ...
Hardly used blind eyelet hole and setting machine
core drilling diameter max.: 56 - 650 mm bore depth: 24000 mm swing diameter: 5800 mm max. workpiece diameter: 3400 mm workpiece length - max.: 24000 mm workpiece weight max.: 380 t speeds: 160 U/min faceplate diameter: 2500 mm control: FANUC 31i-B bore head horizontal movement: max. 25870 mm cutting speed: 0,1 - 1000 mm/min rapid feed: 4000 mm/min main drive: 500 kW bed length x bed width: 53850 x 2500 mm total power requirement: 300 kVA weight of the machine ca.: 700 t dimensions of the machine ca.: 95 x 72 m Deep Hole Drill & Honing Machine (installed 2017) - CNC Control Fanuc 31i-B - BTA Boring - Boring Head (A-Axis) - Pressure table (Z-Axis) - Chip Conveyor - 2 steadies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 800 mm W-axis travel: 1250 mm rotating range B-axis from: 0 ° rotating range B-axis up to: 360 ° WORKING RANGE -BORING- drilling depth (max): 800 mm drilling capacity full bore (steel): 25 mm SPINDLE / HEAD tool fixture: HSK A50 drive power: 15 kW AXIS DRIVES feed velocity (max): 15000 mm/min TOOL MAGAZINE number of positions: 20 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 5600 mm space requirements -front/back-: 4910 mm total height: 2700 mm total weight approx.: 10800 kg 20 toolstations with rotating table 800x600 approx 46300h Including chip conveyor and vari ...
Punching force: 110t, max. punching capacity: 40mm/20mm, throat depth: 750mm, stroke rate: 28/min, max. stroke: 80mm, working height: 1066mm, machine dimensions X/Y/Z: approx. 2300mm/1300mm/2300mm, weight: approx. 4000kg. An on-site inspection is possible.
! Exhibition Machine Corresponds to the Panhans LLB116 with the following optional accessories: - Single-lever operation with fine locking - Dial gauge in the handwheel for height adjustment SPECIFICATIONS: - Max. drilling depth 145 mm - Max. elongated hole length 240 mm - Height adjustment 135 mm - Motor power 1.3/1.7 kW - Suction nozzle Ø 100 mm - Machine weight 200 kg
! Exhibition Machine Equipment/Technical Data Work table mm 800x400 Motor kW 1.5/1.9 kW Spindle speed rpm 1440 / 2880 Max. slotted hole height above the table mm 160 Max. longitudinal work run mm 345 Max. transverse work run mm 245 Spindle stroke mm 160 Clamping Ø of tool mm 0 - 20 Max. tool length mm 175 Span Center Piece 2 Rotating table ° +/- 45° Dimensions of the machine mm 1500x1100x950 Machine weight kg 345 Other features: - Mechanical dowel device, distance 16-22-25-32 - Mechanically numerical spindle height display - Suction nozzle
Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/AMasch. No. 9566 Year of construction approx. 2000Punching force 80 ton. Projection 300 mmPunching up to 40 mm in 14 mm sheet metalFlat material shears 450 x 15 mmAngle steel shears 130 x 130 x 13 mm4 edge shears 45 x 45 mmRound material shears 45 mmRectangular clinker up to 12 mmMotor power 5.5 kWNeching connection 400 volts, 50 Hz stop with el. Stroke release 500 mm - work table with stop at the hole device 550 x 380
core drilling diameter max.: 25 mm bore depth: 1000 mm swing diameter: mm total power requirement: 25 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling Centre Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 ______________________________________________________________________ _____________ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed ...
maximum number of results exceeded
please refine your search
300 € 
