We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,378 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
double-sided long-hole drilling machine with automatic duty cycle, maximum working width / stroke length of oscillation 120 mm, drilling depth max. 80 mm, table inclination max. 20°, tool clamping diameter max. 13 mm, drilling diameter max. 20 mm, spindle motor power 2.24 KW / volt. 380/50 Hz, spindle speed 9,000 rpm, oscillating motor power 0.75 KW, oscillation adjustable from 120 - 240 strokes per minute, pneumatic workpiece clamping, 4 suction nozzles D=80 mm, space requirement - depth 1,000 mm, width 1,300 mm, height 1250 mm, weight 500 KG; Technically and optically in very good condition
used
HofmannLangloch drill Brand Hofmann Type LL150 Year of construction Specifications: drilling depth max. 145 mm (drill head movement) Drilling length: max. 230 mm (table movement) Vertical drilling spindell run max.135 mm Drilling: Drilling depth limitation Table: side ward movement via sep. Handle Cast iron table: solid with mechanical product clamp Height adjustment: Handwheel Motor power 1.3 kW Chuck 5 - 20 mm Condition: functionally tested
used
offer 20366 Specifications: - Printing capacity 100 t - Stroke infinitely adjustable 10 - 100 mm - stroke rate 34 - 80 1/min - Projection 510 mm - Installation height 500 mm - Drive 380 V / 15 kW - punches e.g. up to 31 mm Ø in steel 25 mm - with special punching caliper e.g. up to 58 mm Ø in steel 13 mm - e.g. up to 90 mm Ø in steel 8.5 mm - Space requirement approx. W 1200 x H 2550 x D 2100 mm - Weight approx. 3700 kg - No tools or punching saddles available
used
MUBEA BFL 350 - Profile steel shears technical data see pictures Dimension: LxWxH 1.1x0.7x1.8 meters Coizilgunw Weight 1100Kg
new
: neu : ca. 4 Wochen ab Auftragse : Polen : 7710 € : 161.14 € : 35 to : 60 mm : 27 mm : 25x18 mm : 5 s : 13 mm : 700 bar : 379 mm : 148 mm : 335 mm : 20 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up Wide range of special-shaped punches and dies OPTIONAL: Gantry punching station for increased productivity and operation comfort € 720,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : 2023 : 9681 : prompt, Zwischenverkauf v : Polen : 7810 € : 161.14 € : 1 : 47 to : 110 mm : 27 mm : 25x18 mm : 8 s : 16 mm : 700 bar : 479 mm : 135 mm : 388 mm : 35 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up Wide range of special-shaped punches and dies OPTIONAL: Gantry punching station for increased productivity and operation comfort € 720,- 1 Set punch and dieDm. 16 mm € 68,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Hole unit Horizon HP-20A (Condition - like new - hardly used) Art.: PS5567 specialized module for high-quality punching. The HP-20A module will be integrated into the Horizon brochure line between the Horizon SPF booklet maker and the Horizon FC trimmer. In normal brochure sewing mode, it acts as a simple transition tape. However, it is worth activating it on the central control panel, it is immediately included in the duty cycle.
used
Hole diameter maximum: 80 mm Grinding wheel diameter: 500 mm Workpiece height maximum: 260 mm CNC Brand: Siemens CNC Model: SIEMENS 840D Automatic dressing system Steady rest open C-type Package with stone & flanches Marposs measuring device Centre height260 mm Grinding Ø500 mm Grinding length2000 mm Grinding stone dimensions500 x 80 x 203 mm Grinding stone speeds1960 Rpm Table inclasement+ 6 to - 3 Gr ° Tailstock3 Mk Coolant systemYes FiltrationYes
Drilling capacity: 1200 mm Drilling depth: 1200 mm Spindle taper: 63 Number of heads: 1 CNC Brand: Heidenhain Designed for mold making also for larger counterpart its machine cubical workpieces both effiently and precisely and uses optimized drilling and milling small, medium and large scale are covered. Working area and Drilling capacity Table dimensions: 1,100 x 1,100 mm Max. table load: 7,000 kg Drilling depth: 1,100 mm Drill diameter: 4 - 30 mm Thread cutting up to M24 Axis travel X - axis (horizontal): 1,200 mm Y - axis (vertical): 1,1000 mm Z - axis (horizontal): 1,100 mm W - axis (horizontal - swivelling): 1,600 mm A - Axis (swivel axis): +15°/- 30° B - axis (CNC rotary table): 360° Spindle and Tool changer Spindle holder: HSK-A 63 Tool change positions: 32 General data KNOLL chip conveyor Read off prog ...
used
Deephole Drilling Machine MOLLART model LD2-500 Manufacturer: Mollart Type: LD2-500 YOM: 2005 Serial number. A281 - 1295 CNC Control: GE-Fanuc Power Mate 2 Spindles Min-Max drilling diameter: 2-20 mm Max Drilling depth: 500 mm Drill feed range: 0-3000 mm/min Engine power: 5.5 kW Extra: Counter rotating workpiece, Chip Conveyor, High Pressure Pump, Coolant Filtration 20 micron, 1200l tan, 100bar Feeds: 10 m/min Max workpiece lenght: 500 mm Spindle speed: 10600 rpm Weight: 3500 kg Rapid traverse: 6.000 mm/min
used
C.W. Kreher Söhne KG slotted hole drilling machine LBFM Product name: Slotted hole drilling machine Type: LBFM I and II Manufacturer: C.W. Kreher Söhne KG Machine number: 4638 Year of construction: 1963 Condition: used, revised, checked Technical details: • Table size: 600 x 250 mm • Absorption sizes of the two-jaw chuck: • max. drilling depth: 160 mm • Max. travel in width: 200 mm • Height adjustment: 200 mm • Max. speed: by flipping the belts 2 speeds: 1,500 rpm and 2,800 rpm • Stop for 2 drilling depths • Clamping device: mechanical hold-down devices • V-belt dimensions: 15 mm x 970 mm • Weight: approx. 500 kg Special features: Instruction manual available Engine data: • Voltage: 380 V •Turn: • Current: 6.1 A • Power: 1.6 kW Machine dimensions (L x W x H): 1,200 x 1250 x 1450 mm Transport ...
new
Dowel hole drilling device: no; Drilling depth: 150 mm; Slotted hole length: 180 mm; Height adjustment: 145 mm; Motor power: 1.5kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 240 kg; Solid slotted hole drilling machine with 2 lever operation.
used
Offer 23035 Technical data approx.: - Pressure capacity 30 t. - max. sheet thickness 10 mm - max. punching diameter 105 mm - Punching performance - e.g. Sheet steel : 105 mm in 1.5 mm ; 45 mm in 5 mm - e.g. VA sheet metal : 90 mm in 1.5 mm ; 45 mm in 4 mm - Stroke 7 - 70 mm - Projection 560 mm - Maximum stroke rate 120 h/min - Single stroke / continuous stroke - Drive 400 V / 4 kW - Space requirement approx. W 8000 x H 1850 x D 1700 mm - Weight approx. 1900 kg - with: - Notice table with stops - Foot switch; - Emergency stop button - Punch quick-change device - various receptacles, punches and matrices
used
AUERBACH AX3 TLF deep hole drilling machine was manufactured by the renowned German company Erste Maschinen Fabrik (ERMAFA Sondermaschinen- und Anlagenbau GmbH) in 2011. Characterised by its high reliability and performance, the AUERBACH AX-3 TLF machine used in the drilling of deep holes with high precision and tolerances in various types of metal, provides excellent optimisation of all aspects of the process and a significant reduction in cycle times. The machining process is fully automatic in 6 axes (X, Z, W, Y, B, A), making it capable of obtaining holes with a maximum diameter of 32 mm and a depth of up to 1700 mm. The AUERBACH AX 3 TLF deep hole machining centre is equipped with, among others, a 1500 x 100 mm interpolated rotary table and a user-friendly HEIDENHAIN iTNC 530 CNC control for programming all parameters of the process. The total weight of the drilling and milling m ...
used
Universally applicable frame and slotted hole drilling machine Especially for window construction and universal use through pneumatic height adjustment Double-hole drilling on two levels in one clamping operation Motor power 1.5 kW Starting the engine with a practical handle switch With two-jaw chuck 1 - 20mm from Röhm Pneumatic adjustment of the processing height, dowels on two levels without moving. The desired drilling heights can be set for each drilling level with a digital counter, and switching is then carried out pneumatically from the front Transverse adjustment 430mm, infinitely variable or in 12mm increments Maximum height adjustment approx. 100mm above table height Drilling stroke approx. 150mm 2 pneumatic workpiece clamps Grid rail for quick adjustment laterally in 12mm grid Stop for longitudinal adjustment during slotted hole milling 2 swivelling workpiece ...
used
Rung and slotted hole drilling machine T 140 with angle adjustment Special drilling machine for staircase construction, window construction. Oblique dowels and picket holes can be easily realized thanks to the rotatable drilling unit. Motor pole switchable, two speeds Motor power 1.4 / 1.8 kW, 1380 / 2810rpm Starting the engine with a practical handle switch Röhm two-jaw chuck up to 20mm capacity Linear laser for exact positioning of the workpiece Drilling unit can be rotated 63 degrees to the left and right The desired drilling height can be adjusted with a hand crank and digital counter Transverse adjustment approx. 320mm, infinitely variable Maximum height adjustment approx. 60mm above table height Drilling stroke approx. 140mm 2 pneumatic workpiece clamps Chassis Pressure rubbers renewed Few paint spots repaired Dimensions approx. 1180 x 1000 x 1250mm (LxWxH), ...
used
Package HKS63 Tool Mounts composed of 1 piece Holex HSK 63-M8x101 for screw-in milling cutter 1 piece Holex HSK 63-M12x101 for screw-in milling cutters 1 piece Holex HSK 63-M12-126 for screw-in milling cutters 1 piece HSK 63-M12-132 for screw-in milling cutter 2 pieces Garant HSK-A63-4-80 shrink chuck 1 piece Garant HSK-A63-8-50 for screw-in milling cutter 5 Garant HSK 63 M8-101 for screw-in milling cutters 1 piece Hoffmann HSK-A63-8-65 for Weldon 1 piece Hoffmann HSK-A63-16-80 for Weldon 1 piece Goblet HSK 63x6x65 for Weldon 1 piece Goblet HSK 63x10x65 for Weldon 1 piece Goblet HSK 63x12x80 for Weldon 4 pieces WNT 84 754 622 transverse groove cutter mandrel
used
SPECIFICATIONS: Suitable for processing backrests Number of spindles: 06 Speed: 10,000 rpm variable Max. machining depth: 50 mm Bending radius of the working table min - max: 300 - 900 Pneumatic workpiece clamping
used
Tool holder driven for index G300 (VDI30) Condition: Used Set consisting of: 10 pieces of straight tool holders (1 piece more as seen in the picture) 14 pcs angle tool holder
used
Tool holder fixed for Index G300 (VDI30) Condition: Used Set consisting of: 14 pieces of drill rod holder 24 pieces of turning steel brackets 2 pieces of detour
used
Tool holder collet fixed for index G300 (VDI30) Condition: Used Set consisting of: 14 pieces of drill rod holder 24 pieces of turning steel brackets 2 pieces of detour
new
Swivel holder Miyano SET: 2 pieces Heimatec 8 251 01 000 New
used
Drill holder Ø16.0 mm SET: 5 pieces
new
Swivel holder GRAF SET: 4 pieces Modèle: 01-1381 SCUC R 2559 C09 IK (2 pieces) Modèle: 01-1382 SCUC R 2559 C11 IK (1 Stück) Modèle: 01-1383 SER 2559 C16 IK (1 piece) For Miyano BNA DHY3
new
Swivel holder ARNO 10AB0022 1801016 with internal cooling Shaft 12x12 mm
used
Tungaloy Flat Puncture Holder CTIFL 10-8T05
used
ISCAR Swivel Holder SET: 13 pieces NEW PDACR-1616M-11S 2 pieces PDACL-1616M-11S 3 pieces PDACR-1212M-11S 2 pieces PVACR-1616M-11S 1 piece PCHR 16-24 1 piece DGTL 16B-3035 1 piece DGTL 16B-3025SH 1 piece SVVCN 1616K-11S 1 Stück SVVCN 1616K-11S 1 Stück
new
Collet holder rear STAR 0R1-22 As good as new 2 pieces
used
The scope of delivery includes: 01x Holder for rear wall grille, used Manafacture: Axelent Material color: creamy white Diagonal length: approx. 215 mm Width: approx. 100 mm Protrusion: approx. 95 mm Material thickness: approx. 3.00 mm Slotted hole dimensions: approx. 55 x 8 mm Number of slotted holes: 02 pcs. Weight/ pcs.: approx. 0,37 kg
used
The scope of delivery includes: 01x Holder for rear wall grille, used Manafacture: Axelent Material color: creamy white Diagonal length: approx. 285 mm Width: approx. 100 mm Protrusion: approx. 150 mm Material thickness: approx. 3.00 mm Slotted hole dimensions: approx. 55 x 8 mm Number of slotted holes: 02 pcs. Weight/ pcs.: approx. 0,54 kg
used
Tool holder, milling holder, milling tool -Adjustment: SK50 -Tool holder: Ø 40 x 40 mm -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -Number: 1x recordings available -Price: per piece -Dimensions: 220/95/H95 mm -Weight: 4 kg/piece
used
Tool holder, milling holder, milling tool -Adjustment: SK50 -Tool holder: MK2 -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -Number: 1x recordings available -Price: per piece -Dimensions: 190/95/H95 mm -Weight: 3 kg/piece
used
Tool holder, milling holder, milling tool -Adjustment: SK50 -Tool holder: Ø 22 x 40 mm -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -Number: 1x recordings available -Price: per piece -Dimensions: 210/95/H95 mm -Weight: 3 kg/piece
used
Tool holder, milling holder, milling tool -Adjustment: SK50 -Tool holder: Ø 22 x 31 mm -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -Number: 1x recordings available -Price: per piece -Dimensions: 220/95/H95 mm -Weight: 3 kg/piece
used
Tool holder, milling holder, milling tool -Adjustment: SK50 -Tool holder: Ø 22 x 45 mm -Assembled tool Ø: 75 x 50 mm -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -Number: 1x recordings available -Price: per piece -Dimensions: 240/95/H95 mm -Weight: 6 kg/piece
used
Tool holder, milling holder, milling tool -Take: SK40 -Tool holder: Ø 28 mm -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -Number: 1x recordings available -Price: per piece -Dimensions: 60/60/H210 mm -Weight: 1.5 kg/piece
used
Tool holder, milling holder, milling tool -Adjustment: SK50 -Tool holder: Ø 50 x 55 mm -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -Number: 1x recordings available -Price: per piece -Dimensions: 220/95/H95 mm -Weight: 4 kg/piece
used
Tool holder, milling holder, milling tool -Adjustment: SK50 -Tool holder: Ø 27 x 60 mm -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -Number: 1x recordings available -Price: per piece -Dimensions: 250/95/H95 mm -Weight: 3 kg/piece
used
Tool holder, milling holder, milling tool -Adjustment: SK50 -Tool holder: Ø 50 mm -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -Number: 1x recordings available -Price: per piece -Dimensions: 220/95/H95 mm -Weight: 4.5 kg/piece
used
Tool holder, milling holder, milling tool -Adjustment: SK50 -Tool holder: MK4 -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -Number: 1x recordings available -Price: per piece -Dimensions: 230/95/H95 mm -Weight: 3.2 kg/piece
used
Tool holder, milling holder, milling tool -Number: 6x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 24 kg
used
Tool holder, milling holder, milling tool -Number: 8x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -is only sold complete -Weight: 26 kg
used
Tool holder, milling holder, milling tool -Adjustment: SK50 -Tool holder: MK4 -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -Number: 6x recordings available -Price: per piece -Dimensions: 240/95/H95 mm -Weight: 3.0 kg/piece
used
Tool holder, milling holder, milling tool -Adjustment: SK50 -Tool holder: Ø with groove -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -Number: 8x recordings available -Price: per piece -Dimensions: 270/95/H95 mm -Weight: 3.2 kg/piece
used
Tool holder, milling holder, milling tool -Adjustment: SK50 -Tool holder: MK3 -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -Number: 12x recordings available -Price: per piece -Dimensions: 235/95/H95 mm -Weight: 3.0 kg/piece
used
Tool holder, milling holder, milling tool -Adjustment: SK50 -Tool holder: Ø with groove -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -Number: 28x recordings available -Price: per piece -Dimensions: 270/95/H95 mm -Weight: 3.2 kg/piece
used
Pneumatic cylinder holder, air cylinder holder, pneumatic stamp holder, air stamp holder -Type: H - 32 -Quantity: 40 pieces available -Price: per piece -Minimum order: 3 pieces -Weight: 0.3 kg/piece
used
Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic stamp holder, air stamp holder -Type: SNG-50 TN 32 970 -Number: 12 pieces available -Price: per piece -Weight: 0.3 kg/piece
used
2-hole flange bearing -Type: M-UCT205JD1 -Price: per piece -Number: 8x available -Weight: 0.9 kg/piece
used
2-hole flange bearing -Type: 01CJT05 -Description/type of construction: flange bearing unit -d = inside: 25 -Price: per piece -Number: 79x available -Weight: 0.6 kg/piece