hol monta used for sale

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

Decorative holding card TMCC

Tool holder, milling holder, milling tool, cutter head -Manufacturer: Wohlhaupter, tool holder 195 015 TO13815 -Take: SK40 -Mandrel: 69871 ANSI 40-SMA 22/63 -Dimension: Ø 64 x 160 mm -Weight: 1.3 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson, 2 pieces collet holder -Type: Autolock -Adjustment: SK50 -Tension sleeves: Ø 25/16 mm -Cutter: Ø 44/11.5 -Price: complete -Dimension total. 175/285/100 mm -Total weight: 9.2 kg

Tool holder, milling holder, milling tool, collet holder, milling chuck -Manufacturer: Nikken, Multi-Lock Milling Chuck -Type: MCA50F-32HM-SL -Tensioning sleeve: Nikken KM32-16 -Dimensions: Ø 98 x 220 mm -Weight: 4.5 kg

Tool holder, milling holder, milling tool, -Manufacturer: May, milling adapter: SK50 with fine adjustment -Type: FGK3/SK50/N M14-M30 -Dimensions: Ø 98 x 300 mm -Weight: 5.9 kg

The machine is completely overhauled and is then as good as new! The machine gets a completely new electric satisam with our control system. Technical specifications Drilling process: ELB Number of drilling spindles: 1 Min. Drilling diameter 4 mm Max. Drilling diameter 30 mm Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm Max. Rapid traverse speed X + Z axis 4000 mm / min Max. Rapid traverse speed y-axis 2000 mm Travels X-axis horizontal approx. 700 mm Y-axis vertical approx. 300 mm Z axis designed for max. Drilling depth 1000 mm

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson, 3 pieces collet holder -Type: Autolock -Adjustment: SK50 -Tension sleeves: Ø 10/12/25 mm -Price: complete -Dimension total: 250/250/100 mm -Total weight: 14 kg

Tool holder, milling holder, milling tool, -Milling adapter: SK50 -Type: 50x32x200 M24 -Dimensions: Ø 97 x 140 mm -Weight: 2.7 kg

Tool holder, milling holder, milling tool, test mandrel -Test pin: Ø 50 mm, with tip -Adjustment: SK50 -Dimensions: Ø 97 x 350 mm -Weight: 5.3 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Inside holder: Ø 26 mm -Dimension: Ø 100 x 220 mm -Weight: 5.8 kg

Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.

Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY < < < Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx)

In-line hole drilling machine Scheer DB 4 L x W x H: 1500 x 1500 x 1900 mm Weight approx. 1000 kg Built in 1980 1 aggregate vertically up 1 aggregate horizontal - vertically pivotable The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: see photos -Support length: 80 mm -Clamping height: up to approx. 15 mm -Dimensions: 80/33/H90 mm -Weight: 0.6 kg

Demoor 825-320 oil country lathe. Distance between centers: 3000mm. Swing: 970mm. Swing in carriage: 700mm. Bore: 320mm. New electrical box. Carriage with cone copier. Equipped with chuck.

Table top height: 910 mm Table top size: 700 x 380 mm Max drilling depth: 145 mm Max long hole length: 240 mm Height adjustment distance 135 mm Engine power: 1.5 kW Voltage: 400 V / 50 Hz Speed: 3,000 rpm Net weight: approx. 200 kg Suction nozzle: 100 mm Dm Dowel drilling device: Pitch 16, 22, 25, 32 mm with precision grid roller Driving equipment: Yes Frame stop 90°: pluggable Two-jaw chuck: up to 20 mm clamping range Hand eccentric tensioner: 1 piece 1 Lever control: Yes Measuring clock in handwheel: Yes Miter stop: Yes, double angle adjustment stop from 22.5° to 75° infinitely adjustable

TBT M1-4-320 4-Spindle deep hole boring machine, gundrilling interesting price Mimu Machine Tools (Italy) - Note: in our warehouse Mimu Machine Tools (Italy)

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -different recordings: 10 -from: WNT-Mastertool -Sale: only complete -Price: complete -Weight: 36 kg

Flange bearing -Bore: Ø 100 mm -Mounting hole: Ø 26 mm -Dimensions: 264/264/H60 mm -Weight: 11.4 kg

Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Milling tool holders: 8 pieces MK4 tool holder -Sizes: see pictures -Price: complete -Box dimensions: 630/330/H60 mm -Weight: 20.5 kg

Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different recording sizes: see pictures -Sale: only complete -Weight: 12 kg

Rapid Original TRM 350 Quick Release Holder type TRM350 Indexing 0.005 With 7 alternating necks 4 Pcs 201/350 34mm 1 St 202/350 Prima 32mm 2 Pcs 216/350 Diameter 50mm

SK40 DIN 69871 Oil Feeder met Holder Weldon 40mm A= 65mm For internal cooling for rails without internal cooling through the spindle

SK40 DIN 69871 Oil Feeder Weldon 32mm

Tool holder, milling holder, milling tool -Recording: MK4 -Length: 1103 mm -extendable to: 440 mm -Measurements see: drawing in the photos -Weight: 12.9 kg

Tool holder, milling holder, milling tool -Recording: MK3 -Length: 973 mm -extendable up to: 440 mm -Measurements see: drawing in the photos -Weight: 11.1 kg

Steel holder, clamping plate with T-slot -Holder: 36 - 39 x 18 x 75 mm -Dimensions: 145/135/H170 mm -Weight: 4 kg

WEIBERT WJ-LB2 Long-hole drilling machine WEIBERT WJ-LB2 400V 2.2 KW ( 3 hp) n=2840 min. Drilling table size 600x320mm Drilling table height 870mm Drilling depth 245mm Drilling width 205mm Height adjustment 165mm Swivel ling unit swivel -45°/90°/+45° Machine table made of GREY ING! Manual adjustment with handwheel! AGGREGAT AND TABLE FROM MACHINE GREY! G&WJ-LB2 option: Dowel drilling device available with pitch 16-22-25 and 32mm G&WJ-LB-DÜBEL

Tool holder, milling holder, milling tool -Number: 7x SK40 mounts with tool carrier -Executions: different -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete -Dimensions: 590/120/H210 mm -Weight: 12 kg

Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stroke: 70 mm work height max.: 1094 mm throat: 500 mm : 40 in 14 mm no. of strokes: 20 Hub/min throat: 500 mm : 80 to engine output: 9 kW range L-W-H: 1980x1150x2000 mm weight: 2000 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double tool holder, double tool holder, double tool holder for turning tools -Size: 120 x 120 mm -Schuck holder: 33 x 49 mm -Bore: Ø 25 mm -Resses: Ø 80 mm -Weight: 5.9 kg

Air bellows, roller bellows, air cushions, spring-loaded brake -Gas bottle holder -for: 33.5/43.5 Lbs -Hole spacing: 115/75 mm -Weight: 3.2 kg

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -with: drill holes -Width: 395 mm -Length: 495 mm -Height: 30 mm -Weight: 53.5 kg

Cutting Clamp Kit, Hand Pipe Tap, Tapping Machine, Pipe Thread Cutter, Pipe Thread Cutter, Cutting Head -for cutting head: Ø 90 x 22 mm -Dimensions: 950/108/H38 mm -Weight: 3.2 kg

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -with: holes -Width: 400 mm -Length: 500 mm -Height: 30 mm -Weight: 45 kg

Quick-change tool holder, tool holder head, quick-change tool holder -Recording dimensions: see photos -Dimensions: 133/55/H113 mm -Weight: 2.8 kg

Quick-change tool holder, tool holder head, quick-change tool holder -Mounting dimensions: dovetail width 39 mm see photos -Price per piece -Quantity: 3 pieces -Dimensions: 86/38/H60 mm -Weight: 0.8 kg/piece

pressure: 55 t hole diameter in sheet thickness: Ø 40 in 10 mm throat: 500 mm stroke: 60 mm : 38 /min. engine output: 5 kW weight of the machine ca.: 1.150 kg Overall size: 1500x1100x2000 mm Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t hole diameter in sheet thickness: Ø 40 in 10 mm throat: 750 mm stroke: 60 mm : 38 Hub/min engine output: 5 kW weight of the machine ca.: 1.885 kg Overall size: 1500x1100x2000 mm Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 500 kN hole diameter in sheet thickness: Ø 27 in 13 / Ø 28 in 10 mm no. of strokes: 23 Hub/min throat: 130 mm stroke: 30 mm total power requirement: 3 kW weight of the machine ca.: 295 kg Overall size: 1100x900x1550 mm Standard equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

conus taper: 0 mm with milling disc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: see photos -Dimensions: 75/40/H60 mm -Weight: 0.7 kg/piece

Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: see photos -Price: per piece -Number: 6 pieces -Dimensions: 160/157/H54 mm -Weight: 3.5 kg/piece

Number of tools: 36 St. dimensions: 0,72 x 0,56x 0,95 m weight: 27 kg New movable tool trolley for toolholders with 40 taper or optional for VDI 40 toolholders. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool clamping area: SK50 mm weight: 1 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool -Number: 3x SK40 holders -various: versions -Sale: only complete -Weight: 6 kg

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -1x holder: Ø 27x 85 mm -1x holder: Ø 70 x 220 mm -Sale: only complete -Weight: 18 kg