hoist 10 used for sale

GS14 - used approx. 100 m³ / 100,000 litres double-walled steel tank, heating oil tank, firefighting water tank, water cistern. In good condition, aboveground tank on two mounted steel consoles, storage tank, water tank, former oil tank, steel tank painted in green. capacity: approx. 100 m³ / 100,000 litres material: steel tank, double-walled, DIN6616/2 dimensions: Ø 2.9 m x approx. 15.8 m long weight: approx. 17.0 t manufacturer: Kraemer Apparatebau other: 2 entry shafts Upon request the tank can be repainted for additional charge. The container is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. This steel tank / container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask u ...

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Sambhav Built: 1993 - 2012 Revamped: 2015 Foil width: 1000 mm Entry thickness: 8 mm Exit: 8 microns Consist of: Melting furnace 22 MT Holding furnace 15 MT Strip caster Roughing rolling mill Intermediate foil mill Finishing foil mill Heavy slitter Strip slitter Foil separator Qty. 2 Foil slitters Annealing furnace

ACT activated carbon adsorbers should always be equipped with Kaeser filters. Installed as pre-filters and post-filters, they ensure the maximum service life of the activated carbon and keep carbon dust out of the cleaned compressed air – with very little pressure loss. Generous filling quantities of high-quality activated carbon and their permanently low pressure loss make them particularly economical. This means that they can withstand up to 12,000 compressor operating hours without changing activated carbon. A standard oil indicator indicates possible malfunctions. Residual oil contents in the concentration range 0 – 0.01 mg/m³ Volume flow 1.60 – 155.50 m³/min Maximum operating pressure 10 bar / 16 bar and as an option also 45 bar

Two CHRONOS G 100 grain scales on extra sale! With jacket, outlet funnel, performance boost Approx. 30 t / h performance with heavy grain Refurbished, in good condition, see pictures!

Demo machine from demonstration pool Enormously versatile cable slot machine thanks to individually adjustable, standing cutting knives. Cables are cut as standard by two knives penetrating the insulation on the side. The series was significantly improved in terms of safety in 2014 and now features a short feeder for thin cables and a long feeder for thick cables. The change is made in seconds by means of a rotary mechanism. The simplicity in the construction and the construction with two powerful, synchronously running rollers is left. With coarse gearing, even thicker cables are safely fed into the knives and transported further after the cutting process for removal. Blunt knives can be easily and cost-effectively sharpened with a standard grinding machine.

Ladies and gentlemen, We have following oil transformers in stock from years 2006 to 2015 in top condition. SERVICES: 100KVA to 3500KVA VOLTAGE: 6KV to 33 KV to 400 V or 690 V 1000 kva 20/0.4 KV 1250 kva 20/0.4 KV 1600 kva 20/0.4 KV 2000 kva 20/0.4 KV 2300 kva 12/0.4 KV 2300 kva 20/0.4 KV 2500 kva 15/0.4 also 20/0,4KV 22KV 3500 kva 30/0.4 KV 3500 kva 20/0.4 KV Other sizes and voltages also available from 100 KVA kva up to 3,500. All transformers are in mint condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery inclusive. Any further questions can be reached Mon to sat 8 am to 10 pm.

M. No.: C0851000161 Equipment / Additional information: Ultimate pressure: 150 hPa(mbar)

Sludge feed pump rotary piston pump PL100 Börger Product no.: RE-HU-2019-0701-PK32 System: rotary piston pump sludge feed pump Manufacturer: Börger Type: Pl 100 Speed: 50-700 rpm Flow rate: 2.5 to 38 m3/h Pressure: 12 bar

Kettenstemmer (chain Mortiser) carpentry: â?¢ handy Kettenstemmer with strong pulling engine â?¢ Adjustable depth stop to 125 mm â?¢ Adjustable RIP fence 25-180 mm â?¢ Chain guide with integrated lubrication â?¢ Housing, handles and base plate made of sturdy die-cast aluminium â?¢ Security Beidhandschalter for the protection of the user â?¢ Including high-quality chain set Technical specifications: â?¢ wattage 1350 Watts â?¢ Idling speed min-1 3,400 â?¢ Maximum mortising depth 100 mm â?¢ Press width 40 mm â?¢ Dimensions 261 x 320 x 382 mm â?¢ Weight 10 kg Scope of delivery: â?¢ power cord 5 m â?¢ RIP fence â?¢ Open end wrench â?¢ Allen key â?¢ Chain set (sword, chain, grea ...

The VTA VK100-10 vacuum distillation system is an advanced device designed for effective separation of substances under reduced pressure conditions. It is particularly useful in processes requiring gentle treatment of materials sensitive to high temperatures. Key features of the VTA VK100-10 system: • Efficiency: The ability to process large quantities of material, making it suitable for industrial applications. • Precise parameter control: The advanced control system allows for precise monitoring and regulation of temperature and pressure, ensuring optimal conditions for the distillation process. • Safety: Equipped with advanced security systems, it protects against potential hazards associated with working in a vacuum. • Versatility: The ability to adjust operating parameters to different types of materials, making the system universal in industrial applications. Th ...

Stock number: 3291 INDUCTIONS HEATER Manufacturer: SKF, type: TIH-1000E/C650 Machine no.: 060420, year of build: 2006 Specifications: Automatic residual magnetism Max. 100 kVA Temperature control of Max 240 degree Maximum work-piece weight 2500 kg Length: 1250 mm, height: 1850 mm, width: 2870 mm, weight: 2000 kg

Key data: 300 , 600

Rollers: dia. 300 x 600 mm Roll surface: smooth Rollers type: hollow bored NIP adjustment: Manuel Engine: 22 kW

automatic baler Manufacturer: HSM Type: VK 8818 R-FU, 100 t Year of manufacture / delivery date: 12/2012 Operating hours: approx. 13,500 specifications: Press force: 1000 kN Specific pressing pressure: approx. 120 N/cm² Channel format: 1,100 x 750 mm (W x H) Binding: 5-fold horizontal Wire push-through: seen in the direction of pressing on the left side Filling opening: 1,800 x 990 mm Drive power: 2 x 45 kW Control: S7-300 Theoretical throughput: - At 20 kg/m³ bulk density: approx. 12.86 t/h - At 50 kg/m³ bulk density: approx. 32.15 t/h Cycle time: approx. 8.3 sec. Bale dimensions: approx. 750 x 1,100 x length (600-1,200) mm Bale weights: approx. 500 - 750 kg Machine weight: up to approx. 30,000 kg including: - Remote maintenance system - Wire Slot Maze - Press box double-walled with replaceable HARDOX 500 sh ...

CUBE control system, 2 universal frame, Centre Line, Blanking station, Direct pallet loading, Automatic Universal feeder with non stop facility, Adjustable feed table with complement of infeed table furniture, Left and right hand side register lays, Bottom mounted gripper system, Double action stripping, Binder sheet insertion, hin plate with micro metric adjustment, tools for loading and transporting, Elevated 410 mm, MACHINE IS COMPLETELY WORKSHOP REFURBISHED !

We can offer you 5 x Barmag FK6-1000V texturizing machines,manufactured in 2019,240 spindles,with spandex(lycra) device,still working,good maintenance. We machinery dealer of Polymwerization,POY,FDY,DTY,Staple,Nonwoven amd spare parts. We have many brands and models machines, tell me what you need seriously!

<b>Properties</b> Used belt of manufacturer TRANS standard <b>Technical data:</b> Mass of the belt conveyor Specification no.: U1009424-V0091 Nominal radius/inner radius: 600 mm Width: 900 mm Nominal angle/slope angle: 180Grad Strap type: KT96 Förderhöhendiff.: 500mm <b>Belt conveyors</b> The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

<b>Properties</b> Used belt of manufacturer TRANS standard <b>Technical data:</b> Mass of the belt Specification no.: U1009424-V0520 Nominal radius/inner radius: 600 mm Width: 900 mm Nominal angle/slope angle: 180Grad Strap type: KT96 <b>Belt conveyors</b> The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

Key data: 80 KW, 100 kVA, 400 V

MODEL: EQ-VP10080 GENERATOR ENGINE: Volvo Penta TAD530GE FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 100(kVA) / 80(kW) CYLINDERS: 4 FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1030kg DIMENSIONS L/W/HEIGHT (MM): 21007001450 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address Fo ...

Mikrofinishingmaschine, microfinishing machine, used gebrauchtTyp: MA 3/1000Hersteller: Thielenhaus machine factory WuppertalSteuerung: manually, konv. maximum part size / max. worksize: d = 155 mmMax. 310 part length / max work.length: mmGenauigkeit / precision: 0.001 mmLeistung / load: 12.4 kW, 380/400 ~ specification: stock finish. grinding wheels Floor finishing tools including Machine application: high-precision surface grinding of piston pin

Manufacturer: Stöber Umrichter, Type: 1040 B, Serial number: 1172564/894,

Manufacturer: Indramat, Type: KDS 1.1-100-300-W1, Serial number: 02751,

Manufacturer: NUM , Type: 1040 W1, Model: 139241, Year: 2000, Year :2000

FESSMANN 1000 lit

3000 x 1500m 10 kW Fiber laser cutting machine

Stack lifter Hunkeler AS 1000; Format 800x1200mm; Carrying capacity 1000kg; Hand or foot operation; Checks for function. Pile lift hunkeler AS 1000; size 800x1200mm; lift capacity 1000kg; Hand or foot switch; checked on function.

Hersteller : Hitachi Umrichter, Type: L 100, Card number: 463PT19123, Free text 1: Input 50/60 Hz , Free text 2: 200-240 Volt, Free text 3: 16 Ampere,

Manufacturer: Kaeser Vakuumstation, Type: BSV 100, Year: 2006, Saugvermögen m³/h: 1,0 bar, revolutions rpm: 3000, Operating hours: 76281, Revolutions of main rotor U/min: 3000, Year :2006

Precision flat grinding machine Manufacturer: COSMOS Model: Earth 1050 NC Built: New factory Grinding length: 1000 mm Grinding width: 500 mm Grinding height: 400 mm Electric magnetic release plate 1000 x 500 mm Single fitters at the table firmly assembled for straight judting with compensation Programble display 4.7 " Unseated grinding spindle drive Universal paper tape filter

Manufacturer: Stöber, Type: FBW 1060 X, Serial number: 20922/392, mH/Hz: 100 Hz, Power Output: 3 x 220,

Manufacturer: Stöber Umrichter, Type: 1040 B, Serial number: 1164833/794,

Manufacturer: Stöber Frequenzumrichter, Type: FAS 1015/B, Serial number: 794, Serial number: 1167218,

VERTICAL PRESS RUTIL MODEL: ZEUSS1000TCDDB MATR. C06/100 YEAR: 2000 CLOSING FORCE: 1000 TON VOLTAGE: 380 V FREQUENCY: 50 HZ POWER: 216 KW PRESS. AIR: 6 BAR PRESS H20:4.5 BAR

Cutting sets and moving in snails Suitable for Stephan Machines

Cable Extension Sensors, Posiwire WS7.5-10000-HPROF-SB0, ASM, new Manufacturer: ASM Type: Posiwire WS7.5-10000-HPROF-SB0 Measure length 10000mm Attention! We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

Storage tanks outside marbled for wine, water, fruit juice, schnapps 2.100 Liter UNI-NIED Measurement and Weight: Total Height: 2100 mm Length: 1950 mm Width: 650 mm Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With sloping bottom With filler pipe NW50 Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With connection for level indicator with bar and scale With zapf clape gr. 37 Lower bottom: With flat bottom With outlet pipe connection NW50 with butterfly valve

Manufacturer: Stöber Frequenzumrichter, Type: FAS 1015/B-1, Serial number: 1292, Power Output: 1,5 KVA,

Storage tanks outside marbled for wine, water, fruit juice, schnapps 2.100 liter UNI-NIED Measurement and Weight: Total Height: 2100 mm Length: 1950 mm Width: 650 mm Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With sloping bottom With filler pipe Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With connection for level indicator with bar and scale With zapf clape gr. 37 Lower bottom: With flat bottom With outlet pipe pulled forward NW 50 with butterfly valve

Manufacturer: Stöber Umrichter 1070, Type: 1070 B, Serial number: 1119158/1292,

Henkellikator COMAG Power 100 + 100 Pack/min The machine is double lane

Manufacturer: Stöber Umrichter, Type: FDS 1030 B, Serial number: 67825, Serial number: 1163144,

Manufacturer: Stöber Frequenzumrichter, Type: FAS 1015/1, Serial number: 0193, Power Output: 1,5 KVA,

all stainless steel max. load 1.000 kg (depending on the product) with new control Variotronic with new vacuum pump Busch 63m³ 3 speed engine : 1 / 2,8 / 3,4 rp/min dimensions (l x dpt x h) : ± 2.080 x 1.560 x 1.920 mm

Hammer 16T-M2152-1pcs (136t) Hammer 10T-18KP-1pcs(104t) Hammer 5T-17KP- 1pcs (75ton) Hammer 3T-M213-1pcs(63T) Hammer 2T-M212-1pcs(40T)

Manufacturer: Stöber Umrichter, Type: FAS 1015/B, Serial number: 794, Systemconfiguration: 1167218,

Manufacturer: Stöber Umrichter, Type: FAS 1015/B, Serial number: 1167218/794,

Manufacturer: Numgüttinger, Type: Num 1062 W, Model: aus Weeke bP 155, Serial number: 128327, Year: 1997, war verbaut in Maschine: aus Weeke bP 155, Year :1997

Manufacturer: Wiwa Leimpumpe, Type: 10018, Year: 90/630310, Volume flow m³/min: 10, Compressed air min/max bar: 8, Year :90/630310

NEW JOB CENTER! 480 HOURS TO POWER ON! COURSE AXIS X MM 1,000 COURSE ASSE Y MM 550 COURSE ASSE Z MM 500 TAVOLA DIMENSIONS MM 1.100x502 TAVOLA PLAN: 130-630 MM MAXIMUM LOAD ALLOWED: 700 KG ATTACK: BT40 GIRI/MIN VELOCITY SPEED 12,000 TOOL WAREHOUSE: 24 FANUC CONTROL 0i-MF COMPLETE OF TAVOLA 4/5th ASSE LEHMANN SOO EDITION 3

Busch roots vacuum pump WV 1000 B with 3.0 KW AC-Motor, 1000 m3/h, final pressure: - 100 mbar, completely overhauled with all wearing parts, 1 year warranty

Manufacturer: Europress, Type: 1000 VE, Power kg/h: 35 m³/h, Supply case m³: 0,53, Hydraulikal power kW: 5,5, Ballenpresse: yes, Pressdruck kN/ to: 300, Einfüllöffnung b x h x L mm: 700 673, Ballenmass b mm x l mm x h mm : 500 x 650, Ballengewicht kg: 50 - 200, Year :2001