hoist 10 used for sale

Distance between points: 1000 mm, Height of points: 180 mm, Max. diameter to be rectified: 355 mm, Max. piece weight between points: 300 Kg, Max. weight with plate: 125 Kg, Transverse travel of the carriage (X axis): 350 mm, X-axis speed: 0.01 / 6.000 mm/min, X-axis Resolution: 0.0001 mm, X-axis measurement system: Digital ruler, Longitudinal travel of the carriage (Z axis): 1.300 mm, Z-axis speed: 0.01 / 15,000 mm/min, Z-axis resolution: 0.0001 mm, Z-axis measurement system: Digital ruler, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80 mm, Main engine power: 7,5 Kw, Angle of rotation of the grinding head: -30º / +210º, Workhead rotation speed: 10 / 800 rpm, Workpiece holder head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the tailstock shank: 60 mm, Course of the counterpoint reed: 40 mm, Dimensions: 4600 mm Length x 2400 mm Width x 2050 mm Height, Weight approx.: 6. ...

Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025.

welding current: 30 - 100 A cutting capacity: max. 50mm mm open-circuit voltage: 170 V Required air-pressure: min. 4 bar connected load: kW connected load frequency: 400 V weight: 0,75 kg Dimensions (LxWxH): 1,2 x 0,7 x 1,0 mm Plasma cutting machine with cart - 105 RTX torch - Includes 7m hose package - Spare nozzles - Like new, ready for immediate use The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1,100 litre turbo stirrer/ turbo mixer made of V2A

An induction system ITG for heat treatment of workpieces with vertical chain lift system is available. Process: heating/hardening, number of inductors: 2, inductor type: copper coil, cooling: water cooling, connected load: 382kVA, rated current: 552A. Documentation available. An on-site inspection is possible.

Injection moulding machine Arburg Allrounder 470 H 1000-170 BJ 2010 Clamping force 1000 kN Screw diameter 30mm Screw length 930 mm Shot weight 77g With Arburg robots

Injection moulding machine Sumitomo Demag IntElect 210/580-1000, built in 2009 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 210/580-1000 Operating hours: 27,297 25,717 Cycle counter 3,450,308

pressure: 100 t throat: 300 mm stroke: 10-140 mm no. of strokes: 60 Hub/min ram - range of adjustment: 60 mm table surface area: 800x500 mm ram surface: 430x230 mm hole in the table: Ø150 mm table height: 860 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm Plate thickness: 55 mm table height: 1000 mm plate height: ca. 200 mm weight of the machine ca.: 0,85 t dimensions of the machine ca.: 2x1x1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the safety pin: System: Arestant Type: AS The scope of delivery includes: 10x Safety pins, used Material colour: compl. galvanized Weight: 0,018 kg/pcs. for securing the longitudinal members against unintentional lifting Currently in stock Available: approx. 667 pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Inv. Num. : 8583 Type: REP 100 Producer: Heilbronn Created: 1989 Parameters: Compressive force: 100 t Stroke length: 6-100 mm Maximum stroke rate per minute: 100 1/min Total power requirement: 11 kW Machine weight: 7000 kg

x-travel: 1040 mm y-travel: 600 mm z-travel: 500 mm Control: Heidenhain iTNC 530 table surface area: 1250 x 600 mm table load: 600 kg tool taper: SK 40 spindle turning speed range: 1 - 8000 U/min max. torque on the spindle: (S1/S6) 140/200 Nm feed range: 40000 mm/min rapid power traverse in X-and Z direction: 70 m/min rapid motion - y-axis: 40 m/min spindle drive: (100/40 % ED) 13/19 kW total power requirement: 39 kVA weight of the machine ca.: 8,9 t dimensions of the machine ca.: m Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR ...

Bausch + Ströbel ESA 1010 self-adhesive labelling machine for ampoules, vials, etc., with corresponding format parts suitable for objects with a diameter of up to 36 mm and a height of up to 140 mm, Open-Date Thermocode 53S thermal transfer printer for applying variable data to the label, argus sensorsysteme camera control of ampoule ring code and print image (Pharmacode, Data-Matrix-Code, etc.) with AVS.NET image processing software, rejection of objects with faulty code or identification line, faulty imprint, faulty ring code, no label on object, Siemens SIMATIC S7-300, output depending on label and object size of up to 18,000 pcs/hour, including format parts for DIN ampoules of 1 + 2 ml. (Ø10.75 mm), 3 ml. (Ø12.75 mm), 5 ml. Ø14.75 and 10 ml. (Ø17.75 mm)

An explosion-proof high-voltage motor Loher is available. Mounting type: IM B3, voltage: 5000V, current: 61A, power: 400kW, power factor: 0.79, speed: 597rpm, thermal class: F, protection class: IP55, explosion protection type: EEx d e II C T4, weight: approx. 5670kg. Includes built-in resistance thermometers. Documentation available. An on-site inspection is possible.

Kannegiesser belt conveyor Belt conveyor GF 1000-680-600 RA1302 The Kannegiesser conveyor belt is from 2017 and is in good (used) condition. The belt conveyor has a 400V motor MKM TYPE-1 681.015 with frequency converter to regulate the conveyor speed. The shown supports are included in the delivery. Technical data: conveying length (NL): 1000 mm Framework width (NB): approx 680 mm belt width (GuB): 600 mm Height / Belt run (BH): 685 mm +/- 100 mm Number of support feet: 2 pieces Conveying speed (v m/s): adjustable up and down with frequency converter Drive: Normal Motor Electrical data: 400V / 50Hz / 0,37kW Deflection drum (UT): Ø = 60 mm Belt: 2-layer PVC belt, grey, smooth Year of construction: 09/2017 Special feature / accessories: 1x MKM TYPE-1 681.015/4 with frequency converter 1x emergency stop switch on one side under scaffolding, center 2x light barrier 2x deflection drum cove ...

Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs

Type:TT2 1001 Serial number: K5224 Year of construction: 2015 Working load: max 350 kg Bin type: 200 and 300 litre Compressed air: 6 Bar Power: 3 x 415V, 50Hz, 4kW Dimensions: 1800 x 1700 x 2000 mm Weight: 850 kg

table diameter: 400 mm table load: . t table height: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1500 KG

Technical data of the pallet rack crossbar: Shelving system: Bito Type: PL 38 The scope of delivery includes: 01x Pallet rack crossbar, used Material color: black Box profile: 104/82 x 50 mm Truss Type: PST22.104LN Lowering for chipboard: 22 mm Agraffe: 3 HK (hook) Clear width: 2,200 mm Max. load per pair of trusses 1,500 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Brother Hi-Spin riveting machine 5mm high spin Type: BR1-103 - Crimping ability (Mild steel rivet) φ5mm or less - Spinning head: 20-40mm - Distance between tabletop and punch: 60-180mm - Table working surface size: 310 x 180mm - Processing time setting range: 0.3-5 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.2kw 4Pole Machine size Width 390 x depth 510 x height 1000mm Machine weight 95kg

Technical data of the pallet rack stand: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: M Profile size: P 90 x 75 x 1.80 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 4,000 mm Depth: 1,100 mm General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack stand: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: M Profile size: P 90 x 75 x 1.80 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 2,000 mm Depth: 1,100 mm General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

A welding machine Pfaff including a rotary shear Kuris and an unwinding device MK is available. 1) Welding machine Pfaff 8309. 2) Rotary shear Kuris BOM 101. 3) Unwinding device MK Sewing Technology Systems. Documentation available. An on-site inspection is possible. The system is dismantled and ready for loading.

A cutting, creasing, and scoring machine Bahmüller is available. Passage width: 2300mm, min. strip width: 230mm, passage speed: 150m/min, cutting and creasing roller diameter: 127mm, height adjustment: 20mm, table dimensions X/Y: 2600mm/1480mm, cutting width: 2200mm, circular knife outer diameter: 220mm, coarse scoring outer diameter: 200mm, min. coarse score distance 1/2: 60mm/0mm, fine score distance 1/2/3: 28mm/5mm/15mm. Processes: cutting, coarse scoring, fine scoring, scoring with version R, vacuum feed with version V, and ruler insertion with version L. Machine dimensions X/Y/Z: approx. 2850mm/2600mm/1200mm, weight: approx. 4800kg. Documentation available. An on-site inspection is possible.

Transnorm conveyor belt GF 1000-600-500 RA2423 Technical data: Conveyor length (NL): 1000 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,85 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor spe ...

Separator GEA Westfalia Type: MSE 100-06-177 Properties: Manufacturer: GEA Westfalia Type MSE 100-06-177 Machines No. 1731-518 Year of construction 2012 Engine power 37 kW Total height 2150 mm Width 1600 mm Length 2000 mm Description: The separator is a cleaning separator to remove solids from milk/juice, etc. No cream separator that separates skim milk and cream! Part 1/3 - Separator Dimensions: Width: 1,600 mm Length: 2,000 mm Height: 2,150 mm Part 2/3 Control cabinet Dimensions: Width: 800 mm Depth: 400 mm Height: 2,100 mm Part 3/3 Tools

Technical data of the pallet rack stand: Shelving system: Elektrolux The scope of delivery includes: 01x Pallet rack stand, used Material colour: silver-grey Profile dimensions: C 90 x 50 x 22 x 2.50 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 5,105 mm Depth: 990 mm General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

FAS belt conveyor 1090-630-500 RA2426 Manufacturer: FAS Motor: without motor, driven by overdrive Conveyor length (FL): 1090 mm Nominal/outer width (NB): 630 mm Belt width (GB): 500 mm Profile height: 170 mm Drive roller: Head drive Optional: supports Side guide Price: plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut Conveying length in mm: 1090 Nominal / outside width in mm: 630 Belt width in mm: 500 Driven: Übertrieb scope of delivery: ohne Motor, without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpa ...

Haco PPM 100 ton x 3100 mm CNC Capacity: 100 ton x 3100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 2600 mm Max stroke: 120 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 70 mm/sec Working speed: 7,2 mm/sec Returning speed: 60 mm/sec Electric motor (power): 6 kW Length: 3270 mm Depth: 1550 mm Height: 2240 mm Weight: 7 ton

filling amount: 1000 l Packing: 1,22 x 1,02 x 1,60 m Shipping weight: 300 kg Level measuring device ENDRESS + HAUSER Levelflex M FMP 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1045-650-500 RA1366 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...

For sale are intercoolers from a Mitsubishi S12R. The coolers were subjected to a test run ex works. When they arrived at our place, they were dismantled and stored. Traces of storage available Condition: as good as new (test run ex works) Model: S12R Part Number: 37755-10101 Alternative: 37755-20100 37755-20010

Transnorm belt curve conveyor left 90°-1000-800-IR900 RA2001 Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor Stand width (NB): 1000 mm Belt width (GuB): 800 mm Motor width (MB): +200 mm overall height (BH): 210 mm inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed: Please contact Drive: SEW gear motor with Movi-Mot Electrical data: 50Hz V230/400, kW 0,37 /S1 Year of construction: 1992 Included: Side guide on both sides and frame Optionally available: Suppo ...

Key data: 83 KW, 100 kVA

We currently offer: Number 58 Gesan generator set Type: DRP 100 Engine Perkins Generator LeRoy Somer Power: 83 KW / 100 KVA Hz 50 IP 23 Year of construction 2013 Hours: 15170 AVR regulation R438 Weight: 1906 kg We suspect that the engine has some damage. On the pictures you can also see that the water pump is missing and a sensor. You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Eyelet machine 3 head, can be converted to 1, 2 or 3 heads.

pressure: 1000 t distance between columns: 5000 mm stroke: 500 mm Height of centres: 400 mm Motor output: kW reus: U/min Overall size: 6000 x 2500 mm Weight: 1000 kg Distance between centres: 3500 mm total power requirement: kW weight of the machine ca.: 220 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm belt curve conveyor left 30°-1270-1100-IR900 RA2303 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,0 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 30° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive K ...

Transnorm spiral helix belt curve conveyor left 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 frame width (NB): 775 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 191mm rising ...

Transnorm curved belt conveyor left 90°-800-600-IR600 RA2169 Make: Transnorm Running direction: 90° left running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 800 mm Nominal/outer width with Motor (MB): 1020 mm Inner radius (IR): 600 mm Height frame (BH): 200 mm Height frame with Motor (MH): 400 mm V 220/380, 0,37kW Conveying speed: contat us Optionally available: Supports Side guide one- and both sideds Frequency converter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1998 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 800 Belt width in mm: 600 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, simply get in to ...

Transnorm roller conveyor ejector GF 4510-1120-1000 RA1854 Make: Transnorm Roller width (RB): 1030 mm, Steel rolls Nominal/outer width (NB): 1050 mm Rolls diameter: 50 mm length: 3715mm Overall height frame: 250 ejector angle: 30° in both sides 7 rows ejector individually controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: with supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2016 Roll division in mm: 65 scope of delivery: including supports and side guides angle: 30° KW: 1,5/S1 Electric data: 380-500 Conveying length in mm (NL): 3715 Frame width in mm (NB): 1050 Bauhöhe in mm (BH): 250 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you wi ...

Transnorm infeed diverter diverter inclined infeed inclined outfeed 30°-2005-1930-1000 RA1863 Exhibit Make: Transnorm Year of manufacture: 2016 Discharge angle: 30° Length: 1750 mm inclined inlet and 1130 mm with total width, total length 2880 mm and a middle length of 2005 mm Belt width (RB): 1000 mm Frame height: 150 mm Nominal/outer width (NB): 1150 mm Currently set height: 560 mm Conveying speed: with frequency converter freely adjustable V 380-500 kW 0.4-4 Overall height side wall: 200 mm Scope of delivery: motor with frequency converter, two supports, side guides, two light barriers and an emergency stop switch Features: Construction year: 2016 scope of delivery: including supports and side guides, Lichtschranken, Notausknopf angle: 30° Antrieb: SEW Getriebemotor mit MOVIMOT condition: Ausstellungsstück Belt width in mm (GuB): 1000 Electric data: 380-400 Frame width in mm (NB) ...

Belt conveyor slider 1900-300-1050 Make: Transnorm like new, showroom machine Year 2018 Length:1900 mm Belt width: 300 mm Stand dimensions: 790x480 mm Current conveyor belt height: 1050 mm Adjustable foot height: 100 mm Maximum ejection width: 890 mm Belt conveyor speed: 0,03-1,487m/s Electrical data Completely wired with sensors, direct wiring in the control box Belt conveyor motor data: V300-500, kw 0,75/S1 with frequency converter Ejection motor data: V300-500, kw 0,11-1,1/S1 with frequency converter and Brake Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Belt width in mm: 300 Conveying length in mm: 1900 Antrieb: SEW Getriebemotor mit MOVIMOT Foot plates: 790x480 Conveyor speed m / s: 0,03-1,487 Bauhöhe in mm (BH): 1050 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be  ...

TONAZZI TUBE FILLING MACHINE COLIBRI 1001 Year of manufacturing: 2003 Automatic machine for filling and sealing tubes. Used in various industries, like the cosmetic, pharmaceutical, food and chemical. CHARACTERISTICS • Ideal for small to medium and large productions • Intuitive operator interface • Includes devices to protect the operator during operation PRODUCTION • Mechanical speed: up to 100 tubes/min. • Tube Size Range (Ø): 10 ÷ 50 mm • Tube Size Range with cap (H): 50 ÷ 250 mm • Filling Capacity: 3 ÷ 390 ml • Mechanical Speed: up to 100 ENERGY CONSUMPTION • Water Consumption (for plastic or laminate tubes only): 180 l/h • Installed Power for plastic or laminate tubes: 9.2 kW • Installed Power for metal tubes: 6.7 kW • Max. Air Consumption at 5 bar (basic machine): 4000 l/h DIMENSIONS • Size (with stirrer): 2150 x 1260 x 2100 mm; Approx. ...

A total of 6 horizontal bag sealing machines Joke with vacuum and large container function are available. Seal length: 1000mm, sealing method: impulse sealing, sealing performance: 2x0.4mm, seam width: 6mm-8mm, rail opening: 30mm, throat depth: 153mm, machine dimensions X/Y/Z: approx. 1300mm/1100mm/1950mm. Documentation available. An on-site inspection is possible.

For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...

Key data: 2700 KG, 101000 mm, 75000 mm

Jungheinrich Delta – 101 m | Height 7.50 m | Floor + 3 levels | Shelf load 2700 kg | Used Pallet rack for sale Used pallet racks from Jungheinrich (Delta system) are a proven solution for efficient, safe warehousing. The heavy-duty racking is suitable for warehouses, industrial and logistics companies that are looking for stable and durable racks for Euro pallets. The Delta system offers high load capacity, flexible configurations and reliable performance in daily operations. Buying used means: tested brand quality at an attractive price – immediately available from stock for new construction, conversion or expansion of your shelving system. Individually adaptable: The shelf frames (frame type 512 / 612) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage requirement. Produc ...

Key data: 3500 KG, 101000 mm, 9850 mm

SSI Schaefer PR600 – 101 m | Height 9.85 m | Floor + 4 levels | Shelf load up to 3500 kg | Used Pallet rack for sale Used pallet racks from SSI Schaefer are among the most popular solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses, industrial and logistics companies that need stable and durable racks for the storage of Euro pallets. The proven PR600 design offers high payload, maximum flexibility and is a perfect fit for storing heavy goods. Buying used here means: tested brand quality at a particularly attractive price – immediately available for new construction, conversion or expansion of your existing shelving system. Individually adaptable: The shelf frames (type P120) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage requi ...

Key data: 3500 KG, 101000 mm, 9850 mm

SSI Schaefer PR600 – 101 m | Height 9.85 m | Floor + 4 levels | Shelf load up to 3500 kg | Used Pallet rack for sale Used pallet racks from SSI Schaefer are among the most popular solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses, industrial and logistics companies that need stable and durable racks for the storage of Euro pallets. The proven PR600 design offers high payload, maximum flexibility and is a perfect fit for storing heavy goods. Buying used here means: tested brand quality at a particularly attractive price – immediately available for new construction, conversion or expansion of your existing shelving system. Individually adaptable: The shelf frames (type P120) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage requi ...

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Welding Machine Type: Roll Seam Welding Machine Manufacturer: Nimak Type: NMP 7/100 Year of Make: 1971 Machine No. 71059 Rated power: 100 kVA at 50% ED Connected load: 175 kVA Primary voltage: 380V Open circuit voltage: 7.3V Sec. Str. dd/max. 8/33 kA Electrode force: 750 kp Frequency: 50 Hz up to 8.8 V at 6 ATU All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".

Distance between points: 1000 mm, Height of points: 180 mm, Max. diameter to be rectified: 355 mm, Max. piece weight between points: 300 Kg, Max. weight with plate: 125 Kg, Transverse travel of the carriage (X axis): 350 mm, X-axis speed: 0.01 / 6.000 mm/min, X-axis Resolution: 0.0001 mm, X-axis measurement system: Digital ruler, Longitudinal travel of the carriage (Z axis): 1.300 mm, Z-axis speed: 0.01 / 15,000 mm/min, Z-axis resolution: 0.0001 mm, Z-axis measurement system: Digital ruler, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80 mm, Main engine power: 7,5 Kw, Angle of rotation of the grinding head: -30º / +210º, Workhead rotation speed: 10 / 800 rpm, Workpiece holder head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the tailstock shank: 60 mm, Course of the counterpoint reed: 40 mm, Control type (CNC/manual): CNC, CNC brand: FAGOR, CNC model: 8040-T, Dimensions ...