126,684 used machines on RESALE, but how to find them? Machine Search
Lippert belt conveyor GF 1095-650-500 RA1431 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1095 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT7 ...
Hydraulic power unit, hydraulic pump, hydraulic pump -Drive: 7.5 kW 1440 rpm -Dimensions: 360/310/H660 mm -Weight: 86 kg
Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-1005 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Lippert belt conveyor GF 1090-650-500 RA1393 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB 5 E Year of construction: ...
Bending tool, die, lower knife, lower tool, prism tool -Tool for: press brake -Prisms: R14.5 mm -Square: 101 x 71 mm -Total length: 552 mm -Weight: 26 kg
Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-1010 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Lippert belt conveyor GF 1045-650-500 RA1367 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT7 ...
Bending tool, die, upper blade, upper tool, straightening tool -Handover in its current condition as inspected -Tool for: Press brake -Tool: 88° -Thickness: 25 mm -Total length: 1009 mm -Lengths: 879/130 mm -Total height: 162 mm -Weight: 26 kg
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool: 82° -Thickness: 25 mm -Edge length: 1039 mm -Total height: 162 mm -Weight: 26 kg
Heat-Recovery system (storage tank 1000ltr with internal heat exchanger) -for drinking water -function Qü = ca. 7 kW (inox-screw-heat exchanger-activity 7 kW) - refrigerant- access/discharge 77°C / 50°C - drinking water- access/discharge 40°C / 50°C (complete from 10°C to 50°C- at small drinking water-need is the gotten energy automatic for heating transfer) -for heating-function Qc = 31 kW + 9 kW =40kW Energy buffer storage 1000/800 volume: 1.000 ltr diameter: 800 mm diameter with insulation: 960 mm storage height: 2.290 mm total height: 2.590 mm
x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm table surface area: 600 x 215 mm spindle taper: SK 40 spindle turning speed range: 50 - 2500 U/min feeds: 9 - 450 mm/min quill stroke: 70 mm total power requirement: 1,8 kW weight of the machine ca.: 860 kg dimensions of machine L x W x H: 1,06 x 1,05 x 1,33 m Accessories: vertical head with quill retraction, solid table, counter bearing, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Beam width: 100-150 mm -Payload: 1000 kg -Number: 1x drives available -Price: per piece -Dimensions: 370/405/H340 mm -Own weight: 47 kg
Gear motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 40 mm -Protection class: IP 54/55 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 600/250/H280 mm -Weight: 43 kg
Affeldt roller conveyor tables 1000-531-237 mobile, two-part RA1292 The staging roller conveyors have two parallel roller conveyors and have a mobile base frame. This makes them flexible to use. They are in good condition (used). Technical data: Manufacturer: Affeldt Type: Roller conveyor 1000-531 Year of manufacture: unknown Condition: good (used) Conveyor length (FL): 1000 mm nominal/outer width (NB): 531 mm Conveyor width total: 531 mm Conveyor width single: 2 x 237 mm roller pitch: 34 mm Height OK roller: 850 mm adjustable +/- 50 mm Scope of delivery: with base frame and swivel castors Availability: 7 pieces Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. W ...
Mecalux transfer roller conveyor slider 90° 1050-815-730 RA1914 Make: Mecalux Running direction: both directions Roller width (RB): 730 mm Nominal/outer width frame (NB): 745 mm Total width: 815 mm Length: 1050 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide: Lenze-Motor 3x 400V, 0,25 kW Motor Roller conveyors: 1x ITOH-Deki 16936/010 24V Height frame: 130 mm Currently set high: 745 mm Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/sr Optionally available: scope of delivery: supports and Light barrier Side guide oneand both sides Features: Construction year: 2017 condition: very good (used) angle: 90° nominal voltage: 24V, 400 Conveying length in mm: 1050 Nominal / outside width in mm: 745, 815 Roll width in mm: 730 Roll division in mm: 75 Driven: YES Engine type: Lenze Getriebemotor, ITOH-Deki 16936/010 24V Conveyor speed m / s: ...
Dematic Conveyor Roller Conveyor 3000/2500/2000/1500/1000-600-540 RA1938 Gravity conveyors - roller conveyors without drive Nominal/outer width (NB): 600 mm Available conveyor lengths (FL): 3000 mm, 2500 mm, 2000 mm, 1500 mm, 1000 mm Further information Manufacturer: Siemens Dematic Type: Roller conveyor Year of manufacture: unknown Condition: good (used) roller width (RB): 540 mm roller pitch: 62,5-125 mm variable drive types: none or head and center drive weight of conveyed material: up to 30 kg The following accessories are optionally available e.g.: Motors with and without frequency inverter of the brand SEW Eurodrive / Movimot. supports side guides Features: condition: new Conveying length in mm: 1000, 1500, 2000, 2500, 3000 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5, 130 Driven: möglich scope of delivery: without supports and side guides F ...
Key data: 1020 mm, 3 mm
Specifications • Sheet thickness max. 3.0mm • Working width max. 1020mm • Bending angle max. 120° • Opening width of the upper beam max. 160mm • Description: suitable for prototypes • Power: Manual operation • Dimensions: 2300 x 1600 x 1500 mm • Weight: 760 kg
Connector, plug, sensor module, G2 flat module -Manufacturer: Lumberg -Type: 0976 PFC 101 -Number: 10x plugs available -Price: per piece -Weight: 0.06 kg
Press force max.:: 1.000 kN heating plates:: 480 x 520 mm electrically heated:: °C piston stroke:: ca. 500 mm no. of stages:: 1 Condition: Used, overhauled Specification: 4-column vulcanising press 480 x 520 mm, used - closing force: 100 t - closing: from top to bottom - heating plates: 2 electric plates - New heating platens - Dimensions of heating plates: 480 x 520 mm - Distance between heating platens approx.: 500 mm - AC motor: 5,5 kW - New electric valves - New control cabinet with Siemens 7 touch panel - SPS system Siemens S7-1200 - Frequency converter make Schneider - New cabling - Light curtains in the front operating area Overhauled according to CE standard safety regulations Operating and maintenance instructions in German Warranty: 1 year The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...
Weiss WK-1000/70 Climatic test chamber -70 to +180 °C White WK-1000/70 Climatic test chamber 990 litres Climatic chamber -70 to +180 °C with humidity 10 to 98 % Test chamber dimensions: Height 950 mm Width 1100 mm Depth 950 mm More items - new and used - can be found in our shop! International shipping costs on request!
Weiss SC 1000/+20IU Corrosion Climate Alternating Test Chamber White SC 1000/+20IU down to –20 °C Salt spray chamber More items - new and used - can be found in our shop! International shipping costs on request!
BIHLER GRM100 multislide punching and forming machine, Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.
Transnorm conveyor belt GF 1000-600-500 RA2125 Technical data: Conveyor length (NL): 1000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R17 DRS71S4/MM05/LN Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 1000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m ...
Ref. -No.: 10154 Manufacturer: HEYLIGENSTAEDT Year of construction: 2014 Retrofit: 2015 Type of control: CNC Control: SINUMERIK 840D solution line Storage location: Halberstadt Country of origin: Deutschland Bed width: 2000 mm Feed rate: 1-5000 mm / min Turning Diameter: 2600 mm Turning Length: 10000 mm Centre Distance: 11500 mm Faceplate Diameter: 2000 mm Spindle Speeds: 0,5 - 36 min-1/20 - 140 min-1 RPM Max. Torque: 120 Nm Max. Workpiece Weight: 40000 - 70000 kg Total Power Requirement: 230 kW Cross slide shift (X-axis): 640 mm Further information:
Ref. -No.: 10159 Manufacturer: KELLENBERGER Year of construction: 1974 Storage location: Halberstadt Country of origin: Schweiz Grinding Length: 1000 mm Grinding Diameter: 250 mm
Danfoss FC-102P45KT4E20H1XG 45kW/60HP 131F0340, 3x380-480VFrequency Converter Item Condition: Used Bfisefoc2cy 60kg More items - new and used - can be found in our shop! International shipping costs on request!
x-travel: 10000 mm y-travel: 1100 mm z-travel: 1700 mm Control: Heidenhain type: TNC 155 Tool changer: 30 table surface area: 10000x1000 mm chip conveyor: universal head: table height over floor: 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 900 mm, 560 mm, 480 mm
Inv. Num. : 5373 Type: MCV 1000 POWER 5AX Producer: MAS Created: 2009 Parameters: Control system: HEIDENHAIN iTNC 530 Hours: 57709 h Spindle hours: 47727 h Table diameter: 520 mm Maximum table load (even): 400 kg Number of synchronized axes: 5 pieces Maximum vertical spindle speed: 8000 1/min Mechanical feed length axis X: 900 mm Mechanical feed length axis Y: 560 mm Mechanical feed length axis Z: 480 mm Cone: ISO 50 Number of tools: 40 pieces Tool diameter: 125 mm Max. tool weight: 15 kg Machine height: 3300 mm Machine length: 4600 mm Machine width: 3600 mm Machine weight: 13 t 2020: new spindle
GE Äkta Explorer FPLC 100 Air/General Electric/Cytiva -Box 900 -pH/C 900 monitor -UV 900 UV Detector -UV Flow Cell -P 900 Pump /100ml/min w. Switch Valves Air 900 Control Box -pH Sample -Conductivity Cell -INV 907 Injection V1 Sample Valve V5 Outlet Valve V4 Column Valve V2 Column Valve V 3 -P 960 -M 925 MIxer (2ml) on request 5 and 12 ml) FR 902 Restrictor CU-950 Interface Unicorn Software -Frac 950 Faction Collector warranty
Three-phase motor, electric motor -Power: 3 kW -Speed: 1420 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 390/250/H280 mm -Weight: 37 kg
end mill, end mill, milling cutter -Condition: Like new -Diameter: 50 mm -Working height: 100 mm -carbide-tipped -Recording: SK50
Professional horizontal packing machine from a reputed manufacturer. Suitable, for example, for packaging food, sweets, medical devices, technical articles, printing and paper products, household and toys, and textiles. Package width: 35 – 100 mm Ilbuifcbkb Package length: 65 – 160 mm Package height: 5 – 35 mm Capacity: 35 – 200 packs per minute Film width: 80 – 220 mm Machine weight: 450 kg Machine dimensions: Length 4.0 x Width 0.9 x Height 1.6 m 220V / 50 -60 Hz / 2.7 KW
Converter, power supply, power supply unit -Manufacturer: Siemens -Type: Sitop Sitop SMART 10A 6EP1 334-2AA01 -Input: AC 230 V/120 V -Output: DC 24 V/10 A -Number: 1x available -Price: per piece -Dimensions: 125/75/H125 mm -Weight: 0.7 kg/piece
Key data: 1000 mm, 500 mm, 500 mm
Inv. Num. : 5515 Type: VOC 1000 Produzent: INTOS Erzeugt: 2003 Parametern: Steuerungssystem: Siemens 810D Arbeitstischlänge: 1100 mm Arbeitstischbreite: 500 mm Anzahl der Stapelpositionen: 20 Drehzahl: 8000 1/min Verfahrwege X-Achse: 1000 mm Verfahrwege Y-Achse: 500 mm Verfahrwege Z-Achse: 500 cm Spindelleistung: 25 kVA Kegel: SK 40 Maschinengewicht: 4619 kg Ausstattung: Späneförderer Verfügbarkeit: April 2022 2022: GO Spindel
Replacement knife for table shears, replacement blades, cutting knives, shear knives -Dimensions: 79 x 19 mm -Lengths: 2x 1055 mm -Hole spacing: 50/238 mm -Bore: 17 mm countersunk -Price: complete -Weight: 24 kg
Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Toothed shaft holder: Ø 25 mm -Length: 25 mm -universal applicable -Number: 2x motors available -Price: per piece -Dimensions: 290/160/H160 mm -Weight: 13.5 kg
Key data: 1000 mm, 500 mm, 500 mm
Inv. Num. : 6776 Type: VOC 1000 Produzent: INTOS Erzeugt: 2003 Parametern: Steuerungssystem: SIEMENS Sinumerik Arbeitstischlänge: 1100 mm Arbeitstischbreite: 500 mm Maximale Drehzahl der Spindel: 8000 1/min Verfahrwege X-Achse: 1000 mm Verfahrwege Y-Achse: 500 mm Verfahrwege Z-Achse: 500 mm Spindelleistung: 25 kVA Kegel: SK 40 Anzahl der Stapelpositionen: 20 Stücke Maschinengewicht: 4619 kg
pressure: 100 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 250 mm stroke: 200 mm adjustment of press crosshead: 200 mm stroke speed - idle stroke downwards: 105 mm/sec stroke speed - idle stroke upwards: 180 mm/sec stroke speed - under load: 9,5 mm/sec table width: 200 mm table height over floor: 900 mm dayligth: 280 - 480 mm back stop - adjustable: 3 - 729 mm control: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kW weight of the machine ca.: 10 t dimensions of machine L x W x H: 3,70 x 2,45 x 2,80 m Accessories: programmable back gauge, table extensions, various upper and lower dies segments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine vice, vise, drill press vise -Jaw width: 160 mm -Jaw height: 50 mm -Clamping depth: max. 105 mm -Dimensions: 460/163/H123 mm -Weight: 38.3 kg
Key data: 1050 mm, 510 mm, 560 mm
Inv. Num. : 5759 Type: SVM 105 Producer: LILIAN Created: 2013 Parameters: Control System: Fanuc Oi-MC Operating hours: 23000 h Spindle hours: 5081 h Work table length: 1200 mm Work table width: 500 mm Maximum table load (uniform): 650 kg Tool magazine: 32 pieces Speed: 60-8000 1/min X-axis travel: 1050 mm Y-axis travel: 510 mm Z-axis travel: 560 cm Cone: BT40 Max. tool weight: 6 kg Main motor power: 11/15 kW Machine height: 2558 mm Machine length: 3050 mm Machine width: 2319 mm Machine weight: 5200 kg Equipment: Conveyor IKZ
• With precision balance Sartorius BP 61S • Measuring capacity >5 tbl./min. (BP 61S) • Tablet Ø max. 20 mm • Tablet height 1-12.5 mm • Max. tablet weight Tablet weight 30 g • Weighing range 61 g (BP 61S) • Readability 0.0001 g (BP 61S) • Interface RS 232 (RS 485 via external converter) for transmission of measured data to the control unit of a Kilian tablet press • Compatible with Kilian monitors CW 100/200 and the controllers C 50/52 IPC and VICON • Connection 220V/50Hz
Gear motor, electric motor, electric gear motor -Speed: 26.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 54 -Dimensions: 500/250/H225 mm -Weight: 34 kg
Gear motor, electric motor, electric gear motor -Speed: 26.5 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 33 -Price: per piece -Number: 2x available -Dimensions: 385/210/H215 mm -Weight: 18.3 kg
Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: Rexroth -Type: 102553 -Type: 2492458 -Thread diameter: 48 mm -Thread pitch: 30 mm -Total length: 2285 mm -Weight: 34 kg
Drilling diameter 3-25 mm in ELB Drilling depth in one stroke (mm) 810 with resetting 1,200 Tapping up to M20 – larger by milling Manual tool changer Spindle holder SK 40 altv. HSK 63 Drive power 5.5 kW / ED 100 Travel X (longitudinal) 1,050 mm Travel Y (vertical) 800 mm Table load up to 2,500kg Table size 1,000 x 1,500 mm CNC rotary table 0-360° manual
Bending tool, die, upper knife, upper tool, upper beam -Tool: for folding machine -Dimensions: 60 x 15 mm -Length: 1020 mm -Weight: 6 kg
Table milling machine, table milling machine -Table milling machine: with rigid spindle -Feed: -Speeds: 3000, 4500, 6000, 9000 rpm -Dimensions: 1400/800/H1480 mm -Weight: 600 kg
Expanding pliers, expander set, expanding pliers, socket pliers -for tubes: 12/15/18/22/28 mm -Dimensions: 490/165/H260 mm -Weight: 7.2 kg
The WELGER SB 100 is a German baler for waste paper, foil and other materials and waste. Length of machine, without bale chute 3.380mm Width 1,120 mm Height 1,760 mm Table height 990 mm Table width 600 mm Press force 4.3 tons Time per working stroke 6.7 sec Capacity/throughput 0.75 t/h Bhm8ggch Bale size 600mm w x 375mm h x length 600-1200mm Binder Plastic Yarn Power supply: 400 V/5.5 kW Weight: 40-60 kg Machine weight: 1000 kg ATTENTION- BONUS! A second such machine for spare parts is EXTRA included.
maximum number of results exceeded
please refine your search
