hoist 10 used for sale

Flow rate m3/min: 12.90 Working pressure max bar: 8 Main motor kW: 75 Weight Kg: 1750 Overhauled: Yes Refrigeration dryer MTA - DE 140 - CE 2009 TECHNICAL DATA: Refrigeration compressed air dryer Refrigerant: R134a Refrigerant filling Kg: 2,350 Maximum pressure bar: 16 Total power KW: 3.60 Weight Kg: 293

7 pcs of clamping cubes 1000x750x400mm pirce 800eur/pc

Description

Description

cutting effort 1000t the number of strokes (no load) 17 /min course a support of the blades 140mm Max. cutting diameter of rounded workpiece, mm 190 Max. cutting diameter of squared workpiece, mm 180 for 450 N/mm2. Machine weight, kg 60000

Used machine with 110 KW as a retro-fit machine We are also happy to work on your Stephan machine as in the pictures in the appendix as retro-fit

Description

Zoller tool pre-setr with change adapter for index GE / GB / ER / machines as well as Gildemeister GM / Schuette lathes partly universally applicable (VDI etc) - with Heidenhein measuring device - various base holders - Measuring table Etc.

Conveyor belt BVM; cleaned and tested; Width 1000mm; Length 2850mm; Self-management; Speed adjustable. Tape conveyor BVM 1000x2850; cleaned and checked; width 1000mm; lenght 2850mm; speed control; automatic control.

Technical data: Total length mm: 19800 Working width: mm 1000 Working length mm: 6600x1000 Pass-through height mm: 100 Polishing discs: Yes Polishing discs for edges: yes Diameter polishing discs mm: 200 Vacuum table: Yes

General / technical data: used mechanical vertical internal clearing machine in very good condition. Pulling force at 3m/min: 4000 KG Clearance speed: 3m/min Return speed:6m/min maximum stroke: 1000mm maximum tool length: 1200mm Table area: 450mm x 250mm Table break: 90mm Workpiece diameter: any Dimensions ( h x w x t): 1610 x 630 x 855mm Engine power: 2.2 / 3.5KW Power supply:400 volts 50 HZ Accessories / Optional equipment: - integrated coolant/cutting agent system -electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) - Central lubrication system - CE machine marking Comment: The double spindle drive ensures a quiet and central pulling point as well as a constant clearance speed. The machine is mainly designed for the production of spring springs up to 20mm. The machine has a very quiet machine  ...

Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 yom: 2010 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

Sterile/Aseptic Containers Manufacturer : Vogelbusch Capacity: 18100 liters Technical specifications : Cylindrical, upright stainless steel tank with double jacket Weight 3950 kg Loading room: Pressure- and vacuum-resistant +4/-1 bar Test pressure 6.5 bar Operating temperature 145 °C Material 1.4435 Boiler room: Pressure- and vacuum-resistant +4/-1 bar Test pressure 6.5 bar Operating temperature 145 °C Capacity 230 litres Material 1.4404/316 l/ the container was used in the pharmaceutical industry for sterile water Insulating sheet outside is screwed would have to be partially replaced, since the container is insulated with glass wool, the sheet was deformed during transport. Equipment: Manhole Hand hole DN 200 Cip nozzle DN 50 2x sight glass Rupture disc Cooling/heating jacket inlet and outlet DN 25 GMP Various supports Manhole: DN 500 Documents: ...

Mono-plate system Material:PE, PP, PS, ABS. Built: 1985, last modification: 2003 Screw diameter: 100 mm, L/D 36 Extruder with degassing, vacuum pump, melt pump, hydr. Screen changer, nozzle 1350 x 1.0 - 6.0 mm, 3 rolls smoothing unit 1350 x x 350 mm with single drives, 3 temperature control units for roller temperature control, cooling section, side cut, printwith 2 rubber rollers, top and bottom protective foil lamination, cross saw 1,350 mm, switch cabinets with air conditioning, separate control panel

This Rational Ultra Vent hood for Rational combi steamers, including connection kit, fits the combi steamers CMP, SCC 61/101 Electric from year of construction 2011 to the present (index H+I). The hood has been tested in our in-house workshop and is fully functional. The RRP. for this Ultra Vent hood is € 3,696 net. The price quoted is net, plus 19% VAT. Service: We will be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6 months warranty on all electrical parts • Professional overhaul / inspection & expert cleaning • Tested & fully functional - or mo ...

Clocked working machine for fully automatic sealing of round, flat and mould objects made of glass, plastic or metal with up to two different types of closure. Rubber plugs, drip inserts, screw and pilferproof and flange caps can be easily machined. Power: up to 4200 units/h.

Extinguishing water tank Extinguishing water tank 100,000 litres steel tank, earth tank can be used as extinguishing water retaining tanks, Sports field irrigation, rain retention tanks, cisterns, etc. Factory new Dimensions: D = 2.90 m - L = approx. 16.00 m On request, the container can be fully equipped with a fire-fighting water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection, consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A, with Storz A-fixed coupling and Storz A-blind coupling, - 1 pc. vent pipe DN100 with stainless steel hood - V2A, - 1 pc. anti-vortex plate mounted on suction line, - 1 pc. sign "Extinguishing water colle ...

Material: PE, PP, PS, ABS, / Details: double screw, runner, segmented screws + cylinder, hydraulic. Cassette sieve changer, strand nozzle, 6m water bath, strand granulator, additive dosing. 3-fold degassing (vacuum pump vs. extra charge), For an additional price: dosing system, water ring or underwater granulation.

Longitudinal Splicer Manufactured by KUPER Model: FL/I-1000 - FL/INNOVATION

The vertical shelving system is a well-thought-out storage solution for the upright storage of long goods such as roof battens, strips, installation pipes or beams. It was specially developed for commercial as well as private use and offers a particularly space-saving alternative to classic horizontal storage. Thanks to the vertical storage, only a minimal footprint is required – ideal for confined storage areas or the self-service area in retail. The scope of delivery includes: 01x Vertical racking, new Shelf height: approx. 3,050 mm Shelf depth: approx. 1,000 mm Shelf length: approx. 2,360 mm Projection: approx. 500 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with a ...

Storage Tanks / Pressure Tanks in V2A Max. working pressure: 0,99 bar Test pressure: 1,5 bar with Cooling Jacket and Conical Bottom NEW TOTAL LIST Capacity: 200-1000 litres Cat-no. / Volume: 17-00176-1 200 17-00176-2 300 17-00176-3 400 17-00176-4 500 17-00176-5 625 17-00176-6 750 17-00176-7 1000 Material: V2A - AISI 304, 1.4301 Surface: outside marbled 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with 2 x thread connection DN 50 with CIP washing head (on extra charge) Tank cylinder: with cooling jacket with sample valve with spiral (on extra charge) with immersion socket for temperature indicator analog (on extra charge) Lower bottom: with clear outlet with butterfly valve DN 50 (on extra charge) with rest outlet with butterfly valve DN  ...

Welding edge shaper Offer number: 20120 Make: TRUMPF Type: TKF 103 Machine Number: 454106 Built: ca.1992 Technical data: min. / max. material thickness 3 - 25.0 mm max. bevel length steel 400N/mm2 10 mm max. bevel length steel 600N/mm2 8 mm max. bevel length steel 800N/mm2 5 mm Working speed approx. 2.5 m/min Stroke number 400 rpm Drive 400 V / 2000 Watt Space requirement approx. W 550 x D 200 x H 300 mm Weight approx. 13 kg

This is an UltraVent Plus hood from the manufacturer Rational, type UV PLUS 61/101/E, built in 2023. For the following Index series: Index H and I can also be used for DUO devices or individual devices. This hood not only binds escaping fumes, but also eliminates odors and smoke. You don't need an exhaust air path to the outside. An LED lamp automatically shows you when you need to change the filter. This version has stainless steel lamella filters, as well as a pre-filter mat behind it. In this way, the activated carbon filter, which is located in the hood as the centerpiece, is protected from too rapid contamination and offers optimal functionality. This Plus condensation hood can be used optimally in the front area, in closed rooms or for show cooking. Retrofitting and installation on the Rational SCC WE 61/101 can be retrofitted without much effort. The hood has been checked in our i ...

Pot sealer on stainless frame, 12 x pots, 90mm x 90mm pots, variable temp control and timer settings, 3Ph

Ladies and gentlemen, we have and now available used transformer stations Built: 2000 Power: 1000KVA Primary voltage: 20kV Secondary voltage: 690V, Switching group: DYN5 Switchgear: SF6 Immediately ready for use and available, nationwide good delivery. If you have any further questions, Mr. Serhan is here for you, available Monday to Saturday from 8 a.m. to 10 p.m. and 24 hours in case of emergency

Make: GÜNTNER Type: S-GVH 101 B/3 S Built: 1995 Power: 230kW Volume: 142 litres With subcooler Type GVV 066 C/1 L Volume subcooler: 20.1 liters With 3 fan condenser (1000mm) + 1 fan subcooler (x650mm) 3 pieces Available Price on request Contact details can be found under Contact

Electrical magnet size 1000 x 300m 110 volt supply IP 66

Hot foil stamper, available now, fully workshop refurbished, ready to test • ELEVATED MACHINE Machine elevated 415 mm, included elevation of the steps • Step • Centerline for job quick change • Electronic device for sheet travel control • Air conditioning for the electrical cabinet • Gripper bars • Bobst-electronic for managing the machine • Motore principale con variatore di frequenza • Pianale porta-pila con leva per la correzione laterale manuale della pila durante la produzione • NON-STOP FEEDER MANUAL DEVICE • Adjustable lateral blowers with Centerline references • Suction unit with multiple adjusting • Safety system for lowering the pile try • Introduction table covered by antistatic steel stainless plate • Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle • Feed belt slow-down device Ensures  ...

This is an UltraVent Plus hood from the manufacturer Rational, type UV PLUS 61/101/E, built in 2024. For the following Index series: Index H and I can also be used for DUO devices or individual devices. This hood not only binds escaping fumes, but also eliminates odors and smoke. You don't need an exhaust air path to the outside. An LED lamp automatically shows you when you need to change the filter. This version has stainless steel lamella filters, as well as a pre-filter mat behind it. For example, the activated carbon filter (newly installed) located in the hood as the heart is protected from too fast contamination and offers optimal functionality. This Plus condensation hood can be used optimally in the front area, in closed rooms or for show cooking. Retrofitting and installation on the Rational SCC WE 61/101 can be retrofitted without much effort. The hood has been checked in our i ...

GERDA HYDOMAT PAWN 100 automatic press was built by GERDA HYDOMAT S.A. in Poland in 2001. The machine, with a high press force of 100 tonnes, is dedicated to the mass production of precision steel parts. All machining processes, i.e. precise stamping and threading of the workpieces, are performed fully automatically. The sheet metal feeder accurately feeds the material into the workspace, where the slider and reliable threading head are located. The design, which is made from the highest quality raw materials, in turn maintains the highest stability during even the most intensive challenges. The GERDA HYDOMAT hydraulic press weighs 5200 kg. Technical specifications of the GERDA HYDOMAT PAWN 100 press - press force: 100 t (1000 kN) - work table dimensions (L x W): 700 x 320 mm - height of working space: 250 mm - slider stroke: 0-70 mm - number of slider strokes: 10-40/min - numbe ...

Key data: 80 KW, 100 kVA, 230 V

Made in the EU 30 months warranty On hand! Only 2 pieces available Power Generator Specifications: Model No.: EQ-I10080 Prime Rating: 100 kVA / 80 kW Standby Rating: 109 kVA / 87 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: NEF45TM2A Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression Ratio: 17.5:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2430 mm Width: 1056 mm Height: 1700 mm Weight: 1422 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-coated, weld ...

2 pieces curve belt conveyor 180 degrees, helix for climbing bands with SEW - used -: Price per piece from location: 2.995.-€ (net)! Manufacturer: Transnorm Type: 1600-105 Helix Built: 2011 Conveyor curve 180 degrees Nominal radius: 600mm Rated width: 700mm Condition: good Available: now Location: Bautzen warehouse

compressors / vacuumpumps Flowservice Sihi type KPHY-80540BNX6Y TB4 101 914 12, year 2016 and 2018, suitable for hot air and gas, with motor 90 kW, 985 tpm Price on request

GEMA GP 100 semi-automatic pallet wrapping machine was built in 2012 in Poland by GEMA sp. z o. o. This highly efficient machine is an indispensable tool in various types of warehouses and logistics centres. This is because it makes it possible to wrap loads with a maximum weight of 1500 kg in stretch film, increasing their safety and stability during transport. The process is performed by the machine semi-automatically. The GEMA pallet wrapping machine weighs 500 kg. We have two of these machines for sale. The price included in this advertisement is for one unit. Technical specifications of the GEMA GP 100 stretch wrapping machine - maximum wrapping height: 2200 mm - maximum load diagonal: 1650 mm - maximum load weight: 1500 kg - maximum film roll diameter: 270 mm - film thickness: 7-30 μm - rotary table height: 70 mm - rotary table positioning accuracy (with 1000 kg load) ...

Light curtain Photocell Make: Leuze Electronic Type: SD4R30-1050E 4 pairs, 4x receivers, and 4x transmitters Condition: used but fully functional Only to traders is sold. All information without guarantee

New machine! Max. Speed: 120 (Max. BPM.) Need to match the thickness of the film. Applicable Lable Thickness: 0.05 - 0.07 (m/m) Applicable Lable Lay Flat Width: 40 - 150 (m/m) Applicable Lable Cut Length: 25 - 50 (m/m) Air Pressure: 5.5 (80 psi) Applicable Products Shape: Round, Square, Oval & Others Applicable Material: PVC, PET, OPS, PLA Machine Dimension LхWхH: 1130 x 1000 x 1620 mm Power: 1Ø 220V 50/60HZ - HMI control system help worker operate machine & change size easily. - Single cutting knife cut shrink band without dog ear. - Shrink band apply to cap by sucker; it is good to work with wide cap container. - Single phase power is required, easy & convenient. - Door Interlocks safety feature protecting worker from injury.

The machine is completely overhauled and is then as good as new! The machine gets a completely new electric satisam with our control system. Technical specifications Drilling process: ELB Number of drilling spindles: 1 Min. Drilling diameter 4 mm Max. Drilling diameter 30 mm Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm Max. Rapid traverse speed X + Z axis 4000 mm / min Max. Rapid traverse speed y-axis 2000 mm Travels X-axis horizontal approx. 700 mm Y-axis vertical approx. 300 mm Z axis designed for max. Drilling depth 1000 mm

TURNING ROLLERS LAMBERT JOUTY CZ100 max load capacity 100 tons auto alignment good conditions, ready to work!

The diesel forklift with a load capacity of 10.0 tons (10,000 kg, 22,046 lbs) has been specially developed for the transport of particularly heavy loads. Equipped with a modern Cummins diesel engine, hydrostatic steering, pneumatic tires and a closed hydraulic system, it offers the highest performance and efficiency. For special requirements, we also have electric forklifts for zero-emission solutions, gas forklifts for versatile applications and four-wheel forklifts that are great for difficult off-road conditions. Specifications: - Engine: Cummins F3.8 - Power: 90 kW (120.6 hp) at 2200 rpm - Torque: 500 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 3.8 L - Fuel tank: 140 L - Transmission: 2-2 Powershift - Load capacity: 10,000 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1220 x 175 x 80 mm - Total weight: 12,900 kg  ...

Key data: 400 , 64 , 30

Manufacturer: Arburg Type: 270C 400 - 100 Built: 2000 Control: Selogica Closing force: 400 kN Closing type: Hydraulic Tie bar distance: 270 mm x 270 mm Plate size: 446 mm x 446 mm Tool installation height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 30 mm Lifting volume: 70 cc / 64 gram hp Spray pressure: 1550 bar General Engine: 11 kW Heating: 5.9 kW Dimensions: 3.42 m x 1.5 m x 1.7m Weight: 1980 kg Screen text: German Additional equipment Core train: x1 Robot interface

Key data: 1000 , 194 , 45

Manufacturer: Arburg Type: 420 C 1000 - 350 Built: 1999 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool installation height: min 250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 45 mm Lifting volume: 230 cc / 194 gram PS Spray pressure: 1670 bar General Engine: 22 kW Heating: 8.8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weight: 3430 kg Screen text: German

Key Features & Specifications of Nissan Muffler (550x170x150mm) ✔️ Product Overview: The Nissan Muffler is an essential component of the exhaust system, designed to reduce noise, improve engine efficiency, and manage emissions. It ensures optimal vehicle performance by directing and filtering exhaust gases. ✔️ Key Specifications: Type: Exhaust Muffler / Silencer Compatible Vehicle: Nissan (specific model compatibility may vary) Dimensions: 550mm (Length) × 170mm (Width) × 150mm (Height) Material: Stainless Steel / Aluminized Steel (depends on variant) Weight: Approx. 4-6 kg (varies by design) Inlet/Outlet Diameter: Standard sizes, typically between 40-70mm (check model-specific details) Function: Reduces exhaust noise, directs emissions, and enhances engine efficiency Durability: Rust-resistant and corrosion-resistant for extended lifespan Installation: Direct-fit ...

CNC monitor and keyboard NUM CNC (760-1040) top condition Visible in our warehouse in Gussago BS. Mimu Machine Tools

Key data: 1000 , 205 , 40

Manufacturer: Demag Type: 100/420 - 430 concept Built: 2004 Control: NC 4 Control Type of closure: Hydraulish Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 590 mm x 600 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 40 mm Lifting volume: 231 cc / 205 gram PS Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 11.1 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 4800 kg Screen text: German Optional extras Core train: x1 Air valve: x1 Robot interface

For sale is a fully automatic cleaning and disinfection system of the type Expert 100 / T from the manufacturer Melksysteme Niedersachsen (NISA). The system is ideal for daily cleaning of milking equipment and milk lines on farms. It takes over all dishwashing, disinfection and control functions fully automatically. Specifications: Manufacturer: Melksysteme Niedersachsen (NISA) Model: Expert 100/T Function: Automatic cleaning & disinfection of milking systems Control functions: start/stop, washing programs, temperature control Flushing: Pre-, main and post-flush programmable Power supply: 230 V / 50 Hz (standard connection) Condition: used, cleaned, tested