hohner head used for sale

Fully reconditioned cylinder heads for MWM engine type TCG2032, part number 0518 3232 Available on stock: 16 psc. partstscentras.lt

Slot head for milling machine, milling head, CCCP / USSR STANKO Type 1502Nr: 200 Year of construction 1974Stroke size: max. 60 mmStroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plateHole spacing machine-flange plate: 245 x 185 mmMounting hole: 17 mmCentering diameter on the machine flange plate: 190 mm- Stroke size adjustable via eccentric adjustment- The drive is as with the normal vertical head from the machine gearbox- Drive via driver, centric in the centering diameter- Degree scaling at the

Universal face and boring head LENZ type LPA 1SSpindle tool, spindle head similar to WOHLHAUPTER UPA3Tool holder: SK 40 - M16Adjustment accuracy: 0.01 mm- Accessories as shown- Storage boxWeight: approx. 5 kggood condition; used

1-head scale

Multihead weigher 14 head incl. flow-wrapper and feeder Condition: very good (used) Year of manufacture: 2023 Functionality: fully functional Description: Multihead weigher with 14 heads incl. flow-wrapping machine, feeding into the multihead weigher and removal belt for the finished goods. Built in 2023 and very little run. The system was bought 2 times at the time because the demand for products had increased at short notice. After a short time, however, it sank again, so that the machine is still almost completely NEW. All in stainless steel (304 SS) Weight range: 10 - 2000 g Speed: 120 bags/minute Accuracy: +-0.1g 220V 50/60Hz 1000 W 14 Heads, 1.6 L Volume, 7 Inch HMI, MCU Control Flow wrapping machine with SIEMENS PLC control, maximum film width 420 mm, bag size: B 60-200 mm, L60-300mm, SIEMENS servo motor, 3 line date printer, bagformer 120 mm ...

Four-way head spindle, galvanized Four-way head spindle for height-adjustable and tilt-proof connection of shoring and superstructure with one or two H20 formwork girders. 10.4 kg EUR 38,70 per piece 4-way screw-jack head 4 way screw-jack head for height-adjustable, anti-tip connection between load-bearing tower and superstructure with one or two H20 beams. 10.4 kg EUR 38,70 per piece

Doka head spindle Head spindle for height-adjustable connection of shoring and superstructure. 9.20 kg EUR 37,50 Doka Screw jack U-head Screw jack U-head for height-adjustable connection between load-bearing tower and superstructure. 9.20 kg EUR 37,50

Perkin Elmer Headspace Sampler HS 40XL, Headspace sampler for 40 vials

From a current exploitation we offer you an xyz. Year of construction: 2024 Condition: young used Original price: 622.500,00 EUR Equipment / accessories / other information: NIR Plus Package QUANTIMETER Yield Measurement Activation NIR Ingredient Determination Corn Cutting length adjustment, automatic Near-infrared sensor (NIR) for PREMIUM LINE Wizard Package Variable attachment drive incl. preparation DIRECT DISC Discharge manifold lighting LED, synchr. schwenkb. w. manifold flap Steering angle sensor Dynamic steering CEMOS AUTO PERFORMANCE Camera system, prepared AUTO FILL trolley filling system with CEBIS display GPS PILOT Ready Digital Package II - CEMIS Machine connect license SAT 900 GNSS receiver SAT 900 GNSS Receiver - SATCOR 15 Networked Documentation License 50 Years of JAGUAR Gutfluss XL PREMIUM LINE professional Counter Blade Universal PREMIUM LINE ...

RECON Part Number: 1231 3333 Diesel All parts new ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible.

Used head machine KÖNIG, type: Mini Rex Futura AB -in good bakery condition- - Head machine / dough divider: KÖNIG Mini Rex Futura AB - Knitting roller: SKG54 and RKG58 for round and square dough pieces - 2 rows - Weight range: 25 - 75 g for round - Weight range: 40 - 85 g for square ones - Capacity: max. 2,000 pcs./h - Band very good condition - Condition: Very good, ready to use Suitable for wheat and rye doughs (up to 40% rye content). Visits and test runs are possible by arrangement.

A small geared drilling machine Knuth is available. Drilling capacity steel: 25mm, thread cutting steel: M10-M12, spindle taper: MT3, speed: 2900rpm, quill stroke: 400mm, arm reach: 250mm, table dimensions X/Y: 270mm/300mm. Machine dimensions X/Y/Z: approx. 600mm/600mm/1200mm, weight: approx. 200kg. An on-site inspection is possible.

Extruder S 100/24D. Battery head 12 ltr. Nozzle diameter min/max 160 / 330 mm. Clamping force 62 tons. Max. mold size: length 1,300 mm, width 900 mm. Depth 2 x 250 mm. Opening min / max 500 / 1,400 mm

Extruder S 90/24D. Battery head 5 ltr. PLC-Control Blow-CVomand

Max. saw blade diameter: 400 mm Pneumatic material tensioners

Three milling heads for different machines of the brand Pfauter-Gleason are available. 1) Milling head for Gleason Genesis 130H. 2) Milling head for Pfauter P200, without counter bearing. 3) Milling head for Pfauter PE250. An on-site inspection is possible.

Dough dividing machine KÖNIG, type: Artisan SFC Compact machine for the production of square pastries with a high product variety thanks to interchangeable cutting rollers and punching tools. - Incl. 3 cutting rollers for longitudinal cutting - Incl. 2 cutting tools for the cross-section - Doughs up to a TA of 180 possible - Extremely gentle dough processing - Belt speed adjustment - Machine in stainless steel - Condition: Very good, ready to use - Everything technically checked and machine cleaned Capacity: up to 300 kg/h, at TA 180 Dough belt width: up to 170 mm Speed: max. 1.5m/min. EL. Connection: 3x 380-415 V, 50 Hz, 0.6 kW, 4.0 A Other punching tools are optionally available from KÖNIG: -Square -Heart - Crisp fresh -Quitting time -Rhombus The machine is in very good condition and is ready for immediate use. Visits and test runs are possible by arrang ...

for 6 - 10 t excavator

Accumulation Head Capacity : 4 l // Number Of Heads: 1

Accumulation Head Capacity : 1,8 l // Number Of Heads: 1

Overhauled battery head 12 ltr in very good condition

RECON MWM TBD 441 Part number: 1217 0190 / 6.440.0.180.021.7 -incl. starting valve Cast: 6.440.0.180.021.0 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

- Producer Costa - Type BF 25-1350 - Working width 1350 mm - Year of construction 2002 - Number of brush heads 2 Stk. - 1. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Bürstenkopf tiltable 0 - 30 Grad - 2. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Brush heades tiltable 0 - 30 Grad - Unit height adjustable - Vacuum transport belt - Operating side, left - Location - Druckluftbedarf, Enstaubung 4 bar bei 340 L/min - Diameter Connecting piece 4 x160mm mm - Absaugleistung 3.600+2.500, Gesamt: 6.100 m³/h - Airspeed, exhaust system 24 m/s - Switch cabinet built into the machine - Total connection 35 A / 15 kW - Voltage / HZ 400 / 50 - Spannungsschwankungen max. +/- 5 %

Year: 2018 technically efficient, ready to work – after full service motor power: 2.2 kW disc diameter: 400 mm (cross-cut) machine head can be moved 45° to the right and left head tilt 45° to the left pneumatic profile clamps pressure reducer cooling system

Laser counting head from Baumer electric, neuwertug Item no. Muller Martini: 0052.6174

Laser counting head from Baumer electric, neuwertug Item no. Muller Martini: 0052.6174

Solo Crown corker Arol with 8 capping heads capacity: approx. 18.000 bph incl. cap feeder year of manufacturing: 2019 delivery time: Oktober /November 2026 The machine can be inspected any time.

BR20 , Sandvik As good as new, see photos!

Piston head for Frech die-casting machine, bronze, 931603, Frech/Müller Weingarten, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Piston head for Frech/Müller Weingarten die casting machine, Outer diameter 251.5 mm, thread inner diameter 196.5 mm, height 200 mm, 34 kg

Häwa milling head debarking system is made of: Trunk diameter 0.30 to 1.30, Trunk length 22.0 - 6.50 m Drive motor 55 kW Log feeding station Log wagons Milling head Round timber sorting system li/right after milling Residual wood scraper with discharge Electrical control cabinet, control panel

Used dough divider / head machine KÖNIG, type: Mini Rex 4000 - AB -in bakery condition- - Tested and cleaned - Strap in very good condition - Condition: Good, ready to use - Video on request - Number of rows: 2 rows - Output: max. 4,000 pcs./h - Weight range: 25 - 130 g - El. Connection: 1.3 kW, 3x 400 V+N, 6 A, 50 Hz Visits and test runs are possible by arrangement.

centre height: 130 mm spindle bore: 18 mm ratio: 40:1 swivellable: - 10° bis 90° ° groove width: 16 / 18 mm weight: 35 kg dimensions of the machine ca.: 0,5 x 0,25 x 0,25 m Condition: unused: Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: 2007 - technically efficient, ready to work – after full service - disc diameter: 420 mm - cooling installation - double-sided pneumatic clamp - angle-adjustable crank - pressure reducer

Offer 20147 Technical data: - Load capacity 1000 kg - Tilt angle up to max. 90 ° - Foot pump - Fork length 820 mm - Fork width 550 mm - Space requirement approx. L 1230 x W 740 x H 650 mm - Weight approx. 220 kg

Offer 20148 Technical data: - Load capacity 1000 kg - Tilt angle up to max. 90 ° - Foot pump - Fork length 820 mm - Fork width 550 mm - Space requirement approx. L 1230 x W 740 x H 650 mm - Weight approx. 220 kg

A horizontal dual-head corner cleaning machine Stürtz for the simultaneous machining of two 90° internal and external corners on welded plastic windows is available. Tool stations top/bottom: 8/8, min. product dimensions X/Y without mullion machining: 320mm/370mm, min. product dimensions X/Y with mullion machining: 640mm/370mm, min. frame internal dimension X/Y: 180mm/180mm, max. frame dimensions X/Y: 4000mm/3000mm, installation depth range: 30mm-135mm, profile visible width range: 25mm-120mm, equipment: 4 gasket groove drilling units/4 internal corner measuring devices/4 shadow groove cutters/2 external contour units. Including various accessories and tools. Documentation available. An inspection on site is possible.

n° 4 indoor/outdoor LED headlights \"in their original state\", never used Overall dimensions: 1200 x 800 x 400 mm Weight: 10 kg Auction-ID: A7-44803-321

Technical features: heated knives, weld bead limitation 0.2mm, optimization of the welding result through the parallel sliding welding process, individual adjustment of the welding parameters, quick changing of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/Takt, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, supply voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg. An inspection on site is possible.

n° 4 indoor/outdoor LED headlights \"in their original state\", never used Overall dimensions: 1200 x 800 x 400 mm Weight: 10 kg Auction-ID: A7-44803-323

n° 4 indoor/outdoor LED headlights \"in their original state\", never used Overall dimensions: 1200 x 800 x 400 mm Weight: 10 kg Auction-ID: A7-44803-322

Masterfill Filling Machine S 500, The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products., Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards., The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill ...

diameter range 6 mm shaft length under head 40 mm max. cut-off length 60 mm output pieces/min 600

diameter range 5 mm shaft length under head 70 mm max. cut-off length 88 mm output pieces/min 500

diameter range 5-8 mm shaft length under head 60 mm max. cut-off length 90 mm output pieces/min 200

diameter range 2-5,5 mm shaft length under head 45 mm max. outside dia. Alu 6 mm output pieces/min 450 cutting length 64 mm

diameter range 3-6,35 mm shaft length under head 65 mm cutting length 87 mm output pieces/min 360

semi tubular rivets diameter range 5 mm shaft length under head 40 mm max. cut-off length 60 mm output pieces/min 470

diameter range 0,8-3,0 mm cutting length 30 mm shaft length under head 25 mm output - pieces/min 600

diameter range 2-6,35 mm shaft length under head 70(65) mm cutting length 87 mm output pieces/min 360(320)