hobbing machine used for sale

Kneading machine Boku Type: AK 240 Year of construction: 1996 / 2004 Dough quantity: 240 kg additional 2 boilers Manual control 2 speed automatic Mechanical boiler locking Weight: 0.7 t per kneader Condition: from service, electrics and mechanics contra.

Profile machine for conversion and calibration/punching of coils. Includes Ink Jet printer Hitachi Clever CPL, PC screen Acer, and uncoiler Pinnacle MT-300 equipped with control box. Complete with 1 roller conveyor of approximately 300 x 25 x 100 cm high.

Equipped with Rated Input Voltage: 1P AC380V ±15% 50/60Hz; Rated Input Strength: 29A; Rated input power: 19 KVA; Open-circuit voltage: 280V; Output current setting: 30-120A; Rated output voltage: 128V; Cyclic duty cycle: 60%; Efficiency: 80%; Insulation class: F; Protection class: IP21; Non-contact welding (arc formation): Yes; Unused in box

With accessories; Rim width adjustment range: 1.5" to 20"; Rim diameter adjustment range: 10" to 30"; Maximum Wheel Diameter: 1,300 mm; Balancing speed: 8 to 20 seconds; Maximum Wheel Weight: 250 kg; Weight of the Machine: 169 kg; Connection values: 230V and 12V/24V DC (battery)

2x 4.0 amp/h batteries brushless

Spiral mixers with 2 speeds and 2 digital timers that automatically control the switching of speeds from mixing to kneading. Controls located at the front. Closed protective hood. Mobile. Dough holder for 2 - 25 kg dough, bowl capacity 45 liters W x D x H: 570 x 890 x 1190 mm Power: 400 V / 50 Hz / 1.9 kW Condition: as new, very little used.

Setter machine autonomous for pastry line Belt width 800 mm Settling length adjustable without substructure for sheet metal Condition very good, new settling belt

Production number: 1154 Operating voltage: 220/380 V Frequency: 50 Hz Connection: 2.5 kW Rated current: 10 A

Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets welding data memory, 2T / 4T function, double pulse function VRD, 4 drive supply, 5 total support

Jaw width: 125 mm Reference: Schönichen - Lot 21

Serial number: 46270311 Travel X-axis: approx. 550 mm Travel Y-axis: approx. 500 mm Travel Z-axis: approx. 300 mm incl. granite measuring plate Plate dimensions: 880 x 830 x 160 mm incl. measuring rings and documentation Reference: Hercegfi - Lot 91

Gebrauchte; 120l,; 1991; für schwere Kuchen - effizient. Für weitere Informationen kontaktieren Sie mich bitte. 3 Kessel enthalten

Wire stitching machine Hohner Economy 25/40; good condition; cleaned and tested; 1 stitching head; Yeast thickness max.25mm with folded clamp, 40mm with unfolded clamp; Saddle or block stitching. Wire stitcher Hohner Economy 25/40; good condition; cleaned and chekced; one head; max.stitching height 25mm on block or 40mm for saddle stitching; for block or saddle stitching.

Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets welding data memory, 2T / 4T function, double pulse function VRD, 4 drive supply, 5 total support

Flat bar bending machine Flat bar 100 x 5 mm Square steel 16 x16 mm Round steel 18 mm Angle steel 100 x 8 mm Dimensions 0.9 x 0.25 x 0.3 m Weight 0.025 t Condition: never used / new (5)

Manufacturer: Arburg Type: 270 C 300 - 100 Year of construction: 1999 Control: Selogica Closing type: Hydraulic Closing force: 300 kN Tie bar spacing: 270 mm x 270 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 30 mm Stroke volume: 70 ccm / 59 gram PS Injection pressure: 1550 bar General Engine: 7,5 kW Heating: 4.7 kW Dimensions: 3.4 m x 1.4 m x 1.6 m Weight: 2000 kg Screen text: German

Consisting of 1x WÜRTH EPM200 rotary polishing machine and 1x FESTTOOL ETS150/5-EQ random orbital sander, incl. pads

Jaw width: 160 mm Reference: L.Schaible - Lot 8

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input capacity: 5.5KVA No-load voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Bookslag by contacting us Weight: 6.9KG Dimensions: 375 x 155 x 300

Four-side planer with 4 planing heads •Powerful with 4 motors Hsvwvkytm Voltage 400 V / 3 / 50 Hz Motor power 17,1 kW finished workpiece width 180 mm min. finished workpiece width 25 mm finished workpiece thickness 105 mm min. finished workpiece thickness 10 mm min. length of the workpiece - for single feed 350 mm - at group feed 250 mm Number of working spindles 4 Spindle speed 6000 min-1 Spindle diameter 40 mm Cutterhead diameter 120 mm Length of horizontal spindles 190 mm Length of vertical spindles 120 mm Feed speed 6; 12 m/min Diameter of feed rollers 120 mm Length of feed table 1700 mm Distance of the feed table from the floor 920 mm Quick adjustment of the feed table and ruler 10 mm Weight 1000 kg

incl. welding hose and earthing with accessories for the welding gun as shown in the pictures Reference: Schiller - Lot 12

Manufacturer: Arburg Type: 320 C 500 - 150 Year of production: 2000 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 498 mm x 498 mm Tool height: min 225 mm Opening distance: 350 mm Plate spacing max.: 575 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15 kW Heating: 4,8 kW Dimensions: 3.4 m x 1.4 m x 1.7 m Weight: 2250 kg Screen text: German Additional equipment: Machine with handling Multilift Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor

Key data: 600 , 172 , 40

Manufacturer: Arburg Type: 370 C 600 - 250 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 600 kN Tie bar spacing: 370 mm x 370 mm Plate size: 570 mm x 570 mm Tool height: min 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 40 mm Stroke volume: 188 ccm / 172 gram PS Injection pressure: 1390 bar General Motor: 11 kW Heating: 5,5 kW Dimensions: 4,2 m x 1,5 m x 1,7 Weight: 3400 kg Screen text: German

Jaw width: 125 mm Reference: Seitz and Strenger - Lot 47

Volume: 100L Design Pressure: 12Bar Test pressure: 17.16Bar Min./MAX Temp. 10/50 c

Pneumatic Tapping Machine Version with an adjustable angle, horizontal tapping possible Tapping machines for M3 - M12 threads, angle adjustable. 6 quick-change chuck with slipper clutch. Thread diameter M3 - M12 metric Speed infinitely variable 400 rpm. Working pressure 6 - 8 bar Working range max. 1100 mm Weight 20 kg suitable clamping table Lot 224, 254 or 265. Condition: never used / new (5)

Key data: 500 , 132 , 35

Manufacturer: Arburg Type: 320 C 500 - 250 Year of production: 2002 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Max distance between plates: 550 mm Screw: 35 mm Stroke volume: 144 ccm / 132 gram PS Injection pressure: 1820 bar General Motor: 15 kW Heating: 6,5 kW Dimensions: 3,4 m x 1,4 m x 1,7 m Weight: 2830 kg Screen text: German Additional equipment Robot interface Core pull hydraulic: x1

Overview This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  Formats: KeyKeg Application: KEG filling Operating pressure: 5.5 bar Electrical supply: 230/400 VAC Control voltage: 24 VDC Frequency: 50 Hz  

Key data: 1000 , 166 , 40

Manufacturer: Arburg Type: 420 C 1000 - 350 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar spacing: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool height: min. 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 30 mm Stroke volume: 106 ccm / 97 gram PS Injection pressure: 2500 bar General Motor: 22 kW Heating: 5,8 kW Dimensions: 4,3 m x 1,6 m x 1,8 m Weight: 3700 kg Screen text: German Additional equipment: Robot Interface

This SCHÜBEL MT 630 CNC was manufactured in 1999. It is a horizontal turning machine featuring a point width of 2,000 mm, a circulation diameter of 630 mm over the bed, and 290 mm over the cross slide. The speed range is 8 - 3,000 rpm with a drive power of 28 kW. Contact us for more information about this machine.

Used bottle washer manufacturer: Klinger / Austria Year of construction: 2000 / General overhaul in 2010 at the Klinger Austria plant Type: Euro Class 24/1/844 Capacity: approx. 10,000 bph Control: Siemens S7 Total operating hours: 17,443 hours Net weight: approx. 18,000 kg Steam heated Can be used for bottles: Volume: 200ml - 1.000ml Bottle diameter: 50 - 90 mm Bottle height: 110 - 330 mm The bottle washer has so far been used for: 330ml Longneck 500ml Longneck 330ml swing top bottle 500ml swing-top bottle

This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information.

Magazzino DANOBAT 3 mt. 15 postazioni Circa 15 aanni

Combined Trumpf Trumatic 6000 TruFlow 2000 Co2 laser Preventive maintenance is carried out on the machine by Trumpf annually. installed January 2002 working hours 55734 laser on 16875 Field of work: combined exercise 2585x1280 punch press exercise 2585x1370 laser exercise 2585x1280 Performance: maximum sheet thickness 8mm punching force 220KN active blank holder (programmable) 4,5 - 20kn maximum piece weight 200kg passage height: in punching exercise 35mm in operation of laser 22mm workable materials of laser: iron maximum thickness 8mm stainless steel maximum 4mm aluminum maximum 3mm Speed': x-axis 90m/min y-axis 60m/min simultaneous 108m/min number of trips punching 900min marking 2800min c axis punching 60rpm threading 330rpm Tools: tool places 21 with three collets rotation of all tools tool change time 1.5 -5 seconds max folding height ...

This 3-axis DMG CTV-250 was manufactured in 2012. It features a maximum workpiece diameter of approximately 350 mm and a chuck diameter of 250 mm. The machine is equipped with a 12-position turret and operates at spindle speeds of up to 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTV-250 vertical turning machine we have for sale. Contact us for further details.

Sewingmachine Make Müller Martini Model FK-I1-S Year 1960 Min. size 40 x 60 Max size 250 x 440 mm Stitches 1-8 Details Independend thread tensioning, cutting function

Corner circular shaping machine Foellmer M; good condition; cleaned and tested; knives for straight corner section; .max. Insert height 65mm; Corner section max.70mm; Foot switch. Corner cutter Foellmer M; good condition; cleaned and checked; knife for straight cut; max.pile hight 65mm; corner cut max.70mm; Foot switch.

Horizontal turning machine manufactured in 2024. This STYLE 510 features a turning diameter over bed of 510 mm and a distance between centers of 1350 mm. It has a maximum spindle speed of 2500 rpm and a rapid traverse of 8 m/min. If you are looking to get high-quality turning capabilities, consider the STYLE 510 machine we have for sale. Contact us for further details.

Package strapping machine with frame size 1600 x 400 mm, width 12 mm. Very little used, because bad buy. Location Netherlands, Sold on order.

Grinding spindle for turning steel quick-change systems for machine tools, especially for small lathes, etc. Delivery handling according to picture no. 3.

This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us.

Profile Rolling / Crimping Machine manufactured in 2006. This SCHÜCO ISOMAT 4 features a maximum operating pressure of 0.8 MPa and a nominal pressure of 0.7 MPa. With a machine weight of 880 kg and an additional safety roller set weighing 250 kg, it is designed for robust performance. If you are looking to get high-quality profile rolling capabilities, consider the SCHÜCO ISOMAT 4 machine we have for sale. Contact us for further details.

We sell here a can sealing machine from the manufacturer Lanico, type V 10 A in a good used and functional condition. The machine runs on 400 volts, 0.55 kW, for 70 and 99 cans, workshop tested, immediately ready for use, dimensions W/D/H 50/50/157 cm, others on request.

We sell on behalf a pipe and profile bending machine of the company Knuth (type KPB 50 ). The condition is AS NEW and has a lot of accessories. Pictures to follow

This 4-axis SCHÜCO Profilbearbeitungscenter was manufactured in 2001. It features a travel range of 6,300 x 600 x 405 mm, continuous 180° A-axis rotation, and a high-speed capability of 24,000 rpm. Equipped with an HSK-40E tool holder and an 8+1 tool magazine, it ensures efficient machining. Consider the opportunity to buy this SCHÜCO Profilbearbeitungscenter. Contact us for more information about this machine.

Lapping machine manufactured in 1983. This MYLÄP 400 features a lapping plate diameter of 400 mm, suitable for precision lapping applications. If you are looking to get high-quality lapping capabilities, consider the MYLÄP 400 machine we have for sale. Contact us for further details.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Variovac; Model: 4000 VA; Year of production 1997; Working with soft or hard foil; Bottom foil: +/- 560 mm (approx); Upper foil: +/- 550 mm (approx); Molding length: 420mm; Forming width: 503 mm; Molding depth: 70mm; Formats: 3.2; Length: 8600 mm; Width: 1200 mm; Height: 2000 mm; Weight: 2500 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1997; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 492mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.2; Length: 7200 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1700 kg.