hobb used for sale

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmVertical850 mmCross1050 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H12 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360  ...

Remko AMT 80-E Dehumidifier Construction Dryer No damp walls, musty odours and mould growth, dry quickly and sparingly at the touch of a button. Locations of the devices The devices are used wherever dry rooms are important and consequential economic damage (e.g. due to mould growth) is to be avoided. The devices are used, among other things, for drying and dehumidifying: ■ New buildings, industrial buildings ■ Basements, storage rooms ■ Archives, laboratories ■ Cottages, caravans ■ Bathing, washing, changing rooms, etc. The recirculating air fan sucks in the moist room air via the dust filter, evaporator and the condenser behind it. At the cold evaporator, heat is extracted from the room air and cooled down to below the dew point. The water vapour contained in the room air precipitates as condensate or frost on the evaporator fins. In order to avoid mois ...

CharacteristicsSwing- Ø, max.450 mmWeight approx.10000 KgDrive power milling spindle9,5/5,5 kWDrive power main spindle15/11 kWDrive power second spindle15/11 kWNumber of Toolmagazine positions38 Speed max.12000 rpmSlewability of B-Axis+/-120 degreeMovements X / Z / Y455/800/+-105 mmMilling spindle upper side1 Input precision of C-axis on Counterspindle0,001 degreeSpindle speed 2nd Spindle max.6000 rpmInput precision of C-axis on Mainspindle0,001 degreeBar diametre52 mmSpeed max.6000 rpmMax. Turning Length800 mmMax machining diameter430 mmDimensions (L x W x H)4,17 x 2,5 x 2,5 (4,55 x 2,5 x 2,5) mGeneralTurning-milling centre SZM: Tool spindle, Spindle 1, Spindle 2 and Turret 2 (Milling); Control: CELOS - ERGOline Spindle 1 hobbing functionSpindle 1 hobbing function Gear machining or spline machining is possible by synchronizing the rotary tool spindle rotation on turret 1 with the spind ...

Key data: 420 mm, 1500 mm, 210 mm

well-preserved, used lathe Ramo a42 Built in 1987 Rapid traverse for longitudinal and flat Foot brake Circumferential diameter over bed 420 mm Center width 1500 mm Speed range 25-2000 rpm Center height 120 mm Spindle bore 80 mm Quick-change bracket Multifix Coolant device with chip tray Manual Can be tested under power Prices do not include VAT (domestic). The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved. Mechanische Werkstätte Höbbelmann GmbH Niederkasseler Str. 3a 51147 Cologne Phone: 02203/83584 eMail: hoebbelmannt-online.de

hobbing length: 2100 mm milling width: 300 mm max. module: 16/18 min. module: total power requirement: 10 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic tailstock, Ø max. gear: 250 with 3 cutter, Module: 5,5, Hobbing length: 70, Cutter module: 5,5, Outside ø max. acknowledged: 300 mm, Ø spindle: 85 mm, Ø hole table: 39 mm, Ø table: External centering Ø139,75, Power tool motor (b): 4 Cv, High: 1.800 mm, Long: 1.450 mm, Weight: 2.450 Kg, Width: 1.000 mm

hobbing length: 1750 mm milling width: 260 mm max. module: 10 min. module: 12 total power requirement: 8 kW weight of the machine ca.: 4500 kg dimensions of the machine ca.: m D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Model UZFM – V 300 H Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 � ...

No. 5104: 1 gebr. Coordinate measuring machine / CMM - Hobbyist device / ET carrier - Fabr. WENZEL / NUMEREX, Type 1318-10 Mnl, Bauj. 1987 Arb.-Ber.: 330 x 440 x 180 mm, Other: Space requirement approx. 1 x 1 x 1.5 m Weight approx. 300 kg

Steaker / Fleischmürber / Strip Cutter Manufacturer: BIZERBA / Type: S111 PLUS Specifications: 230 V / 50 Hz / 2.7 A Weight: 32 kg including 3 mm strip cutter insert Function tested, machine ready for use Sale as a defect/hobbyist device because sheet metal damage to side panel, see original pictures! Condition, see original pictures! If you have any questions, email or call.

machine measurements: -- mm machine weight: -- kg power capacity: -- kW Condition: used Specification: dosing unit type SiloStar 922 A - second-hand - for dosing liquid silicone LS - container: 20 litre hobbocks and 200 litre drums - Power connection: 400V, 50Hz Equipment of the plant with: - Fardoser SPS P1 - Mixer / material pressure regulator cooled with outlet valve - roll-in device - Pressure and material shortage protection - Machine connection outlet valve and pressure regulator - Pressure vessel Colour The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HOFLER HF 2000L hobber/gasher with both internal/external heads Year: 2013 Installed in 2020 Less that 200 working hours Table diameter: 1500mm Table loading: 18000kg Working stroke (external hobbing): 1760mm Working range above table (external hobbing): 150-1910mm Working range above table (internal hobbing): 250-1460mm Counter support-end face above table: 800-2300mm External toothing, Max: 2000mm Internal toothing, Max: 2400mm CNC control: Siemens 840D Complete weight: 61000kg Equipped with counter support

Stephan MCV10 Microcut, continuous cutter, colloid mill, koial mill, emulsifier Voltage: 400V Speed: 2850rpm Stainless steel funnel Machine heavily soiled and with rust deposits on the housing without nameplate very loud run, because bearing damage, therefore sale as spare parts donor or hobbyist object Video about test run available

HOBBING MACHINE - LIEBHERR S 800 /Lorenz workpiece with counter holder 600mm workpiece with retracted holder 800mm distance of the milling carriage 360mm Largest millable pitch b. largest workpiece 5Pi in the normal power range 8 Pi Receiving cone - milling spindle MK 5 Milling mandrel 22/27/32/40mm milling cutter diameter 186mm cutter length 170mm milling cutter displacement 80mm Milling cutter speeds 40-220 rpm Feeds infinitely variable/vertical Feeds infinitely variable/horizontal Feeds infinitely variable / tangential Clamping table without water rim 550mm Clamping table bore 100mm Mandrel cone MK5 Mandrel 36mm COMPLETE TECHNICAL DATA CAN BE SENT BY E-MAIL BE SENT. ACCESSORIES SEE PICTURES. 1xpallet interchangeable wheels 1xPalette hobs 1xpallet clamping/mandrel Documentation Machine feet Chbaacmi7q Dimensions: LxWxH 3.6x1.8x1.9 meters Weight a ...

CNC GEAR HOBBING MACHINE LIEBHERR LC 3000 FN Year: 2010 Control : SIMENS 840D Table diameter: 2600mm Max. workpiece diameter: 3000mm Table hole: 700mm Max. table speed: 5 RPM Center distance with external cutter head: 210…2100mm Center distance with internal cutter head: 0…1800mm Workpiece load: 300kN Max. axial travel: 1200mm Cutter head swiveling angle: +/-45 degrees Original table size is 2000mm, but the factory made a new sub table and put it on top of the original table and used it. Including external milling head, chip conveyor. All manual books available. Low working hours. Excellent working condition.

Hob, gear cutter for hobbing machine WMW / PWS Type G Module 3 ( Module 3 ) HSS / Co TGL 29-8002 Bore Ø 40 mm New Dimensions: 110 x 100 x 100 mm

Ecamo Supermatic BS relief powder line; is sold as a hobbyist's device, the conveyor belt of the boom is defective. Relief powder machine Ecamo Supermatic BS; only for spare parts; belts of the feeder are broken.

hob, gear cutter for hobbing machine WMW / PWS Type G Module 1,5 HSS / Co TGL 29-8002 Bore Ø 27 mm New Dimensions: 58 x 69 x 69 mm

max. wheel diameter: 2800 mm gear width: - mm max. module: 20/30 min. module: Control: Siemens 840 D total power requirement: 40 kW weight of the machine ca.: 50 t dimensions of the machine ca.: 7 x 4,5 x 4,75 m The machine has only a few working hours and is like new. The machine is under power and may be inspected by prior arrangement. CNC control Siemens 840 D Nominal workpiece diameter: 2800 mm Table diameter: 2500 mm Pitch wheel diameter: 2,200 mm Table bore diameter: 800 mm Table bore depth: 875 mm Machine nominal module Hobbing aprrox. 20 mm gear Milling approx.: 30 mm Smallest/largest distance between milling cutter and workpiece axis: 600/1,735 mm Largest axial slide path – special design: 1,000 mm Largest champable hob diameter: 350 mm Largest champable hob length: 375 mm Swivel range of the milling head: + 30/- 45o cutter arbor cone: HSK-B160 (hollow shank taper according t ...

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 2,25 1575 HSS / Co TGL 29-8002 bore Ø 27 mm New Dimensions: 70 x 70 x 58 mm

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1,5 1844 HSS / Co TGL 29-8002 bore Ø 27 mm New ! Dimensions: 69 x 69 x 58 mm

hob, gear cutter for hobbing machine WMW / PWS Type G Module 2 0175 HSS / Co TGL 29-8002 bore Ø 32 mm New Dimensions: 80 x 80 x 71 mm

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0191 HSS / Co TGL 29-8002 bore Ø 32 mm New Dimensions: 80 x 80 x 71 mm

turning diameter over bed: 350 mm turning diameter over slide rest: 200 mm turning length: 800 mm spindle bore: 46 mm spindle turning speed range: 18: 25 - 2000 U/min spindle head: Din 55027 Gr. 5 total power requirement: 4,4/2,2 kW weight of the machine ca.: 800 kg dimensions of the machine ca.: 2 x 1 x 1,8 m Video available on our website.: Condition: ready for operation: Electric 380 Volt: 3 jaw chuck: neu 160 mm Multifix-toolholder with tapers: Rear chip protect: Faceplate: Röhm 310 mm Motor brake: Universal lathe from the training area with new 3-jaw chuck, face plate and multifix holder. It was not heavily used, which can be seen from the little paint wear on the back wall. We ask interested private parties to refrain from making an inquiry, as it is a well-preserved professional machine and is therefore too expensive (+ VAT!) for hobby mechanics. Machine dealer with own sto ...

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0510 HSS / Co TGL 29-8002 Bore Ø 32 mm New ! Dimensions: 80 x 80 x 71 mm

hobbing length: 1750 mm milling width: 260 mm max. module: 10 table size incl. water gutter: 460 x 2100 mm table clamping surface:: 250 x 1850 mm cutter width - max.: 100 mm feed of the milling slide, stepless: 0 - 500 mm/min. rapid traverse feeds: 3000 mm/min milling head -swivable +/-: 30 ° Rotation speed range of milling head, in 9 steps: 29 - 178 rpm Milling head swivable 2 sides helical gearcutting: 30 ° total power requirement: 4 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 4 x 1,85 x 1,85 m Accessories: Change gears Milling arbors Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hob, gear cutter for hobbing machine WMW / PWS Type G Module 1,5 0082 HSS / Co TGL 29-8002 bore Ø 27 mm New Dimensions: 70 x 70 x 58 mm

GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter920 mmWeight approx.19900 KgRapid feed X / Z20/24 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z485/2150 mmNumber of tool stations12 Speed max.1600 rpmBar diameter max.116 mmSwing- Ø, max.733 mmMax. Turning Length2000 mmDrive power main spindle45/37 kWCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) Hollow Cylinder set for KITAGAWA 24in. Hollow Chuck B-24A1521D (without chuck body) (SK-OP)(Left Spindle) Hollow Cylinder Set for 24-inch) Chuck B-24A1521D (Bar work capacity dia. 117 mm (4.61 inch)) Hollow cylinder and draw bar are  ...

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0234 HSS / Co TGL 29-8002 bore Ø 32 mm New Dimensions: 80 x 80 x 71 mm

Mazak Integrex 200-IV ST Ø 660 x 1500 mm Control Unit: Mazatrol Matrix Maximum turning diameter : 660/260 mm Maximum turning length : 1.495 mm Milling spindle speed : 12.000 rpm Main spindle maximum speed : 5000 rpm Subspindle maximum speed : 5000 rpm ATC 40 Capto C6 system 9-station turret swarf conveyor 2 Stck. 3-jawchuck Kitagawa B-208 5-axis simultaneous Full C-axis sub spindle Flash-Tool Synch. MillTapp Gear Hobbing CE-Zeichen Come with tools purchased

hob, gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1,5 1432 HSS / Co TGL 29-8002 bore Ø 27 mm New Dimensions: 69 x 69 x 58 mm

workpiece dia.: 100 mm module: 3.0 mm fixture slide travel: 400 mm Control: Siemens - Sinumerik 840 D max. milling cutter diameter: 80 mm cutter length max.: 180 mm turning speed range: 50 - 12.000 U/min table turning speeds: 3.000 U/min Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached extraction system: Ringler, - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle - AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - Workspace, - tailstock, - measuring device, - refrigeration system, - Industrial robots: Epson, - goods carrier, - conveyor belts, - control panel, The machine is in very goo ...

hob, gear cutter for hobbing machine WMW / PWS Type G Module 2 0120 HSS / Co TGL 29-8002 bore Ø 32 mm New Dimensions: 78 x 78 x 71 mm

tool taper: MK4 diameter of tools max.: Ø 145 mm table-size: L: 800 x B: 700 mm surface area: Ø 300 mm table travel: 200 mm total power requirement: 7,5 kW weight of the machine ca.: 4,9 t dimensions of the machine ca.: 2,8 x 1,5 x 2,3 m Additional information: Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: -counter-point taper MK4, co-rotating -Centre distance of  ...

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1,5 1646 HSS / Co TGL 29-8002 bore Ø 27 mm New Dimensions: 70 x 70 x 58 mm

hob, gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1,5 0088 HSS / Co TGL 29-8002 bore Ø 27 mm New Dimensions: 70 x 70 x 58 mm

hob, gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1,5 1042 HSS / Co TGL 29-8002 bore Ø 27 mm New Dimensions: 70 x 70 x 58 mm

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1,5 0062 HSS / Co TGL 29-8002 bore Ø 27 mm New Dimensions: 70 x 70 x 58 mm

workpiece dia.: 80 mm module: 2,5 mm fixture slide travel: 220 mm Control: Siemens - Sinumerik 840 D max. milling cutter diameter: 100 mm cutter length max.: 160 mm turning speed range: 200 - 5.000 U/min table turning speeds: 3.000 U/min Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached exhaust system for dry processing: Ringler, - Noise insulation for dry milling machine - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - coolant device, - Automation unit: AMZ, The machine is in very good condition. For additional equipment information p ...

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0233 HSS / Co TGL 29-8002 bore Ø 32 mm New ! Dimensions: 79 x 79 x 71 mm

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1,5 0093 HSS / Co TGL 29-8002 bore Ø 27 mm New Dimensions: 70 x 70 x 58 mm

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0144 HSS / Co TGL 29-8002 bore Ø 32 mm New Dimensions: 80 x 80 x 71 mm

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0630 HSS / Co TGL 29-8002 bore Ø 32 mm New Dimensions: 78 x 78 x 71 mm

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 2 0140 HSS / Co TGL 29-8002 bore Ø 27 mm New Dimensions: 63 x 63 x 48 mm

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 1,5 1454 HSS / Co TGL 29-8002 bore Ø 22 mm New Dimensions: 54 x 54 x 38 mm

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 1,25 1057 HSS / Co TGL 29-8002 bore Ø 22 mm New ! Dimensions: 48 x 48 x 32 mm

CNC milling machine KNUTH WF 1 CNC The CNC milling machine of the renowned KNUTH brand, model WF 1 CNC, built in 1992, offers precise milling results and reliable performance. This used machine is ideal for beginners and hobbyists. Specifications: - Table clamping surface: 270 x 700 mm - Table movement longitudinal (X): 300 mm - Table movement vertical (Y): 200 mm - Table movement transverse (Z): 350 mm - Spindle mount horizontal and vertical: ISO 40 - 8 spindle speeds horizontal: 110 - 1230 rpm - 8 spindle speeds vertical: 150 - 1660 rpm - 8 feeds: 26 - 290 mm/min - Rapid traverse: 1100 mm/min - Quill travel: 60 mm - Drive power: 3.7 kW - Dimensions: approx. 1310 x 1380 x 1650 mm - Weight: approx. 1000 kg The machine is in a used condition and in need of repair. It has proven to be extremely reliable and will continue to work reliably for many years to come. With i ...

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 1 2120 HSS / Co TGL 29-8002 bore Ø 22 mm New Dimensions: 50 x 50 x 32 mm

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 1 2076 HSS / Co TGL 29-8002 bore Ø 22 mm New Dimensions: 50 x 50 x 32 mm

Description: Machine number: 1221 BL number: 140710 Table dimensions: approx. 745 x 160 mm With 3 T-slots Table movements: Lengthwise (by spindle or automatically): 260 mm Vertical (by spindle only): 310 mm Longitudinal (by means of lever): 235 mm Automatic table movements: 8 longitudinal feeds: 11 - 210 mm/min 8 vertical feeds: 11 - 210 mm/min Fast feed of the table: Longitudinal and vertical: 1000 mm/min Spindle head: Steep taper with driver according to standard ISO30 N.S.11/4' VSN33931 size 32 DIN2079 size 30 Spindle bore: diameter 15 mm Spindle speeds (infinitely variable by means of speed controller): 58 - 2000 rpm With accessories as shown in the pictures, including counter holder with horizontal spindles, with the corresponding side milling cutters, hobbing cutters and other cutters With technical documentation as shown in the pictures Approx. Onsite Dimension. (l x w x h): 1,050 ...

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 1 1605 HSS / Co TGL 29-8002 bore Ø 22 mm New Dimensions: 50 x 50 x 32 mm