hobb used for sale

Diameter capacity: 2000 mm; Maximum module: 20 mm; Max. work piece weight, kg 10000 Width of the gear: 560 mm; Spindle speed range, rpm 8...125 Main motor power: 15 kW Dimensions: mm 6910x2990x3460 Weight: 31 800 kg

Surface reference plates, roughness dimensions MASSI hobbing TGL 4763 Rz 6.3 μm and Rz 20 μm in wooden box Dimensions: 240 x 120 x 30 mm

Inv. Num. : 6635 Type: 16 GLS 25-90 Producer: Coburg Created: 1985 Parameters: Max. speed: 285-1700 1/min Maximum distance between tailstock tips: 4120 mm Max. thread diameter: 14-90 mm Equipment: Replacement clamping bushings Circular knife sets

Surface reference plates, roughness dimensions MASSI hobbing TGL 0-4763, DIN4763 Rz 6.3 μm - Rz 20 μm in wooden box used, tested ! Dimensions: 240 x 125 x 40 mm

Module 6.00 mm Cylindrical / profile grinding module 14.00 / 8.00 mm Workpiece diameter 380 mm Axial travel 1,000 / 600 mm Shift travel 320 mm Hob speed 12,000 min-1 Tool diameter 170 / 320 mm Tool length 230 mm

Surface reference plates, roughness measures MASSI hobbing TGL 4763 Rz 6.3 μm - Rz 20 μm in wooden box Dimensions: 240 x 125 x 40 mm

Key data: 1600 mm, 460 mm, 16

3 x heads , change gears

Key data: 460 mm, 10

BEVEL GEAR SPIRAL GENERATOR

Pfauter gear hobbing machine / module 2.5 x250 -Module 2.5mm -Wheel diameter 250mm -Mandrels -Interchangeable wheels -otherwise as pictured Dimensions: Ji7pv08nrp LxWxH 1.4x0.9x1.7 meters Weight approx. 900Kg

Gear hobbing machine 4000 mm Module 13 282

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 12 min. module: 0,5 total power requirement: 8 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 300 mm, 5

I am selling a well-used gear milling machine from WMW Modul, model ZFWZ 500x5. The machine is fully functional and runs without any problems. The foot (coolant device) and the entire machine were completely cleaned. The connection cable and plug were replaced. When sold, the entire oils are renewed. Largest wheel diameter is 500mm Largest module is 5. The weight of the machine is 1950kg. Incl. complete, original cabinet with interchangeable wheels and an instruction manual. The machine has already been overhauled. The guides show almost no signs of wear. If you have any further questions, please do not hesitate to contact us. The machine can be viewed and tested under power by prior appointment. On-site loading is no problem and free of charge. The sale is without guarantee and warranty. Returns are excluded. All information is subject to change.

CNC GEAR HOBBING MACHINE LIEBHERR LC 3000 FN Year: 2010 Control : SIMENS 840D Table diameter: 2600mm Max. workpiece diameter: 3000mm Table hole: 700mm Max. table speed: 5 RPM Center distance with external cutter head: 210…2100mm Center distance with internal cutter head: 0…1800mm Workpiece load: 300kN Max. axial travel: 1200mm Cutter head swiveling angle: +/-45 degrees Original table size is 2000mm, but the factory made a new sub table and put it on top of the original table and used it. Including external milling head, chip conveyor. All manual books available. Low working hours. Excellent working condition.

Gear hobbing machine STANKO 5B312 with change gears.

Key data: 250 , 400 , 10

The machine needs to install the new electric system Specification: Work table diameter 580 mm Gear diameter 630- 710 mm Gear width 400 mm Module range 1-10 Max. axial feed travel 400 mm Max. tangential feed travel 200 mm Max. helix angle 45 degrees Min. number of teeth hobbed 10 Min. number of teeth hobbed (indexing drive) 5 Max. hob diameter 200 mm Max. hob length 250 mm Diameter of hole in table 100-250 mm Depth of hole in table 45-300 mm Distance center of hob to table 175-575 mm Distance center of hob to center of table 50-505 mm Driving taper for hob arbor (step taper) 50 mm Hob speeds of universal hobbing head steeped 50-400 rpm Milling spindle speeds 40-400 rpm Axial feeds 0,2-10 mm/rev Tangential feeds 0,1-5 mm/rev Radial feeds 0,1-1 mm/rev Main motor capacity 29 kW Direct current 10 kW Machine dimensions 3380x2715x2250 mm Machine weight 9200 kg

max diam 340 , max modul 8

Key data: 3000 mm, 32

1 CNC Gear Milling Machine Make: Gleason-Pfauter Model No.: P2001/3000 Year of manufacture: 1980 / Retrovit 2000 Largest milling diameter: 3000 mm Largest module: 32 Face plate diameter: 1920 mm Power main drive: 30 kw. max. workpiece weight: 25 tons. Equipment / Accessories: CNC control made by Siemens Internal gear milling head Setting Stick - Counter Holder Workpiece fixtures Interchangeable wheels various milling cutters various cutter mounts Conveyor

Gear hobber sharpener Kapp AS 305 B

Inv. Num. : 7169 Type: RM 80 Producer: Wera Created: 2002 Parameters: Operating system: SIEMENS SINUMERIK Maximum gear diameter: 80 mm Machine weight: 3500 kg

Description: Various spare parts for Koepfer 140 gear hobbing machines Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 300 mm, weight approx.: 75 kg

Description: Technical details: Wheel diameter - max. 406 mm, wheel width 420 mm, module - max. 4.3, module - min. 0.5, cutter speeds 49 - 246 rpm, table bore diameter 80 mm, total power requirement 7 kW Approx. Onsite Dimension. (l x w x h): 2,800 x 1,600 x 2,200 mm, weight approx.: 3,500 kg

Description: Control type: conventional, technical details: tool holder MK4, tool diameter max. Ø 145 mm, table size L: 800 x W: 700 mm, clamping surface Ø 300 mm, table travel 200 mm, division max. 5 module, total power requirement 7.5 kW, machine weight approx. 4.9 t, space requirement approx. 2.8 x 1.5 x 2.3 m, additional information: Application: Gear hobbing machine for gearing straight and helical spur gears, worm gears as well as rollable profiles, cycle milling and individual milling as well as counter and synchronous milling , Information on the machining of spur and worm gears: -Outside Ø max. 250mm with counterholder -Division max. 5mm (module), -Tooth bevel max. 45°, -Tooth width max. Axial milling 200mm and radial-axial milling 240mm, -Milling width max. clamping table counterholder 655mm, milling slide: -swivel 210°, -travel path 350mm, -feed, 2 directions, 16 steps in ...

Description: Gear hobbing cutter, Module 15 R1 EA 126 DIN 3968 A DIN 3972 II E-W. 20 ° c. 4 ° 21` HSS-E Frst. 33.75 Approx. Onsite Dimension. (l x w x h): 230 x 230 x 210 mm, weight approx.: 40 kg

Description: Gleason-PFAUTER CNC Hobbing Machine for Gear Cutting of cylindrical and worm gears up to 2.4 m in diameter. Designed for internal milling Control system SIEMENS Sinumeric 840 D Working area Workpiece nominal diameter: 2000 mm Largest millable diameter: 2400 mm Distance between milling cutter and workpiece axis min./max.: 300 / 1400 mm Axial slide path max.: 1600 mm Radial slide path: 1050 mm Hob cutter length max.: 375 mm Hob cutter diameter max.: 350 mm Milling head Swivelling range: + 30 / -45° Cutter arbour taper: HSK-B160 (hollow shank taper according to DIN 69063) , Max. milling cutter displacement: 300 mm Nominal module hobbing approx.: 20 mm Nominal module tooth form milling approx.: 30 mm Internal milling head IFK2 , Workpiece table Table diameter: 1870 mm Table bore: 600 mm Chip removal through table bore Please take a l ...

Description: Gleason-PFAUTER CNC Gear Hobbing Machine for gear cutting of cylindrical and worm gears up to 1.2 m in diameter. , Control system and Machine number Control: SIEMENS Sinumeric 840 D Machine number: 30 190 Working area Workpiece nominal diameter: 1200 mm Axial slide path max.: 1000 mm (special version) Radial slide path: 800 mm Hob cutter length max.: 500 mm Hob cutter diameter max.: 450 mm Milling head Swivelling range: + 30 / -45° Cutter arbour taper: HSK-B160 (hollow shank taper according to DIN 69063) , Max. milling cutter movement: 450 mm Nominal module hobbing approx.: 25 mm Nominal module for tooth form milling approx.: 35 mm Workpiece table Table diameter: 1200 mm Table bore: 300 mm Please take a look at the t echnical data and layout plans in the PDF file . Travel of counterholder: 900 mm, module min./max.: max. 35, control: SI ...

Description: Gleason-PFAUTER CNC Gear Hobbing Machine for gear cutting of cylindrical and worm gears up to 1.2 m in diameter. , Control system and Machine number Control: SIEMENS Sinumeric 840 D Machine number: 30 024 Working area Workpiece nominal diameter: 1200 mm Axial slide path max.: 1000 mm (special version) Radial slide path: 800 mm Hob cutter length max.: 500 mm Hob cutter diameter max.: 450 mm Milling head Swivelling range: + 30 / -45° Cutter arbour taper: HSK-B160 (hollow shank taper according to DIN 69063) , Max. milling cutter movement: 450 mm Nominal module hobbing approx.: 25 mm Nominal module for tooth form milling approx.: 35 mm Workpiece table Table diameter: 1200 mm Table bore: 300 mm Please take a look at the t echnical data and layout plans in the PDF file . Travel of counterholder: 900 mm, module min./max.: max. 35, control: SI ...

max. wheel diameter:80 mm max. module:3 total power requirement:25-35 kW weight of the machine ca.:10 t workpiece weight:15 kg workpiece length - max.:-50+450 mm table diameter:145 mm diameter of hob:90 mm cutter length max.:220 mm hob turning speeds:1.000 U/min

max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation

weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine

max. wheel diameter:1500 mm gear width:600 mm max. module:16 min. module:1 total power requirement:38 kW weight of the machine ca.:18,7 t dimensions of the machine ca.:7,7 x 3,6 x 4,5 m m Retrofit in 2004, original from the 80s No internal hobbing device

max. wheel diameter:130 mm gear width:170 mm max. module:3 min. module:0,5 total power requirement:48 kVA weight of the machine ca.:9 t dimensions of the machine ca.:7,64 x 3,14 x 3,25 m For technical data, see PDF-File enclosed

max. wheel diameter:90 mm gear width:300 mm max. module:3 tip circle diameter:max. 65 mm root circle dia. min.:28 mm max. geared Length:150 mm tool length - max.:203 mm tangential ( y-axis ):140 mm axial ( z-axis ):400 mm Tailstock ( z²-axis ):350 mm loading and unloading portal ( z³-axis ):1850 mm milling head -swivable +/-:+ A = 40 / - A = 40 ° working piece table: max. outer diameter / bore hole:120 / 45 mm feeds X-axis:1 - 10000 mm/min feeds Z-axis:1 - 10000 mm/min rapid power traverse in X-and Z direction:10000 m/min rapid motion - y-axis:5000 mm/min fast rapid z²-axis ( tailstock ):10000 mm/min. speeds of tool:300 - 4000 U/min working piece table speed:0 - 1000 1/min. connected load:44 kVA voltage:400 V control voltage:24 kW weight of the machine ca.:7500 kg dimensions of the machine ca.:3170 x 2975 x 2440 mm

max. wheel diameter:280 mm max. module:7 weight of the machine ca.:13 t table turning speeds:100 U/min table diameter:250 mm min. number of teeth:4 hob turning speeds:1500 U/min max. hob diameter:160 cutter length max.:230 mm Machine in good condition. Available 01.08.2024

max. wheel diameter:200 mm gear width:60 mm max. module:7 weight of the machine ca.:15 t table diameter:180 mm table turning speeds:100 U/min hob turning speeds:750 U/min Machine in good condition, without feed, without automation Available 24.08.2024

max. workpiece diameter: 250 mm threading length: 800 mm max. module: 8 min. module: 1 total power requirement: 10 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 3,05x1,75x1,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter:130 mm max. module:3 total power requirement:15 kW weight of the machine ca.:6 t dimensions of the machine ca.:2,3 x 2,5 x 2,17 m A well-preserved CNC hobbing machine Vertical for shafts and wheels With tailstock Also suitable for hard milling (good for steering pinion) Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range 0,1 - 2000 mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm 2500 mm 2170mm Accessories : Hydraulical workpiece clamping ...

Komsomolec 5K328A Gear hobbing machine Max. work piece diameter 1250 mm Max. work piece diameter with support 850 mm Table diameter 1000 mm Module 12 Max. table load 2000 kg Min. number of processed teeth 20 Max. length of processed teeth mm: - straight 560 - 30 degrees angle 400 Main drive power 10 kW Machine dimensions 3560x1790x2590 mm Machine weight 14000 kg

GEAR HOBBING MACHINE MAKE: KARATS MODEL: GH-20H YEAR: 1984 Specification : Table dia. : 2000mm (Bore dia.: 300mm) Max. dia. : 3000/4300mm (HOB/SINGLE) Max.Module: M30/35 (HOB/SINGLE) Max.dia of hob: 380mm Max.Length of hob: 510mm Machine size: 7000 x 4100 x 4300 (L x W x H) Weight: Approx 45Ton

Wanderer 31 L500 Screws & Thread Milling Machine -Workpiece length max. 500mm -Oscillating range above bed approx. 400mm -Spindle bore approx. 80mm -Speed range 55 - 250 rpm -Work light -Interchangeable wheels (see range) Dimensions: LxWxH 2.5x1.4x1.6 meters /Weight 2600Kg Errors / input errors excepted Coqznl9t

Machine Type: Table Lathe Manufacturer: BERNARDO Model: Hobby 300 VD Year of construction: 2011 Condition: very good Offer Type: Used Machine Specifications: Center height: 90 mm Center width: 300 mm Spindle bore: 18 mm Speed range: 0 – 2500 rpm. Propulsion: 0.4 kW / 230 Volt Remark: infinitely variable speed control, Three-jaw chuck Ø 80 mm with interchangeable jaws, Auto. Feed / Thread, Digital display longitudinally and transversely, Moving grain tip, Quadruple steel bracket, Various turning steels Weight: 38 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

-Hobbing press -Make: Sack & Kiesselbach -Type: 500 Mp -Mach.No: 30407 -Capacity: 500 tons -Width between uprights : 420 -Daylight: 370 -Stroke: 340 -Clamping surface : Ø 500 -Closing speed: 100 mm/s -Pressing speed : 1.8 mm/s -Opening speed: 200 mm/s -Power -Dimension: -Weight 3.25 + .330 -L x W x H: 2.245 x 1.8 x 1.17

Spiral kneading machine for gastronomy, amateur or hobby baker NEW

Schnitzen wie ein Profi, geeignet zum Kopieren von Figuren, Bildern und Schriften, egal ob aus Holz, Metall, Stein, Kunststoff oder anderen festen Materialien. Technische Daten: - die ideale Maschine für Profi und Hobbyschnitzer - Kopieren von Figuren - Kopieren von Bildern und Schriftzügen - Fräslange max. 500 mm - Fräsbreite max. 350 mm - Werkzeugaufnahme Spannzange 8 mm - Spannhals 43 mm - Elektronik Fräsmotor 1050 W mit Vollwellenelektronik, dadurch immer materialgerechtes Arbeiten möglich. - Drehzahl 10000 - 32000 U/min - Abmessungen LxBxH 1200 x 750 x 1150 mm - Gewicht ca. 50 kg - solide, robuste und schwingungsarme Bauweise - leichte Handhabung - wartungsfreie, nachstellbare Linearführungen - hohe Lebensdauer - Made in GERMANY

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...

Lift trucks - counterweight forklifts - drawbar forklifts without battery to hobbyists pickers, also called "order pickers", are used for the sprinking of pallets in pure storage operation. The types LO2.0 M and LO2.0 are designed for the predominant access in the first level , the operator can also reach into the 2nd level with the help of the integrated ascent in the corner back. For the intensive picking in the first and second level, the type LO2.0 L was equipped with additional platform hub. With the foot switches in the ground for electric lifting and lowering, the operator has both sides free when picking. ; as is

Delford Labeler Sortaweigh Concept 500, MDLA0140 with Siemens TD 200 Control, stainless steel mobile stand, for hobbyists

Diameter: 0 mm Width: 0 mm Bore: mm Tangential head for gear hobber RS 2 - also available: Tangential head for gear hobber RS 00 ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Due to project abandonment, I offer here my Twin Heat wood chip heater, it is built in 2010 I bought the heater myself 3 years ago, disassembled, cleaned and replaced and reassembled defective parts It is mounted on a sturdy steel plate and can be moved with a forklift Originally, I wanted to use it as a hall heating system and install it in a shipping container There are a lot of new parts installed, such as valves, expansion vessels, bearings, rotary wheel blades, thermal drainage protection and a lot of small stuff You can either burn solid fuel or wood chips, but it has a huge combustion chamber The rotary valve is completely re-lined with sheet metal and welded and re-mounted The wood chip burner has been cleaned and resealed, extinguishing system has been provided with new hoses I had the system briefly test runs with water to test it, everything worked You can remove the  ...

GeneralTurning Center; Control: Control M730UM CharacteristicsMax machining diameter366 mmDimensions (L x W x H)3,84 x 2,36 x 1,80 mDrive power tool spindle7,5/5,3/3,7 kWDrive power main spindle22/11 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z250/1143 mmRotary tool spindle speed6000 rpmNumber of tool stations12 Speed max.4500 rpmBar diameter max.65 mmSpindle bore73 mmSwing- Ø, max.760 mmMax. Turning Length1085 mmWeight approx.6500 KgSLIMlineSLIMline DMG MORI operating system equipped with MAPPS. The large 15-inch display can reduce the number of switching of the screen as it provides the four-way split screen and allows user to see more information at once. It is also possible to customi(Spindle 1) 22/15/11 kW,4,500 min-1 (Standard)(Spindle 1) Standard Spindle 22/15/11 kW (30/20/15 HP), 4,500 min-1 The ALX2000 adopts a highly reliable ...

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmVertical850 mmCross1050 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H12 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360  ...