hob used for sale

Gear diameter: 0 mm Module: 0 mm Axial travel: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Maximum pivot diameter: 6.0 mm Maximum lenght of pivot: 10 mm Minimum pivot diameter: 0.50 mm Total workpiece length: 60 mm Execution: 2 Wheels Driving motor (motor power): 1.10 kW Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 300 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1400 mm Various accessories: Cast-iron base

Gear hobbing machine 53A50H, STANKO, with change gears

Automatic hobbing machine make MORAT type B 9for milling gears with spur toothinggr. workpiece diameter Magazine guide: 20 mmGr. workpiece diameter without magazine guide: 70 mmkl. Workpiece diameter: 1.5 mmgr. milling length: 40 mmgr. number of teeth to be milled: up to 360kl. number of teeth to be milled: 5Gr. Division: Module 1kl. Division: Module 0.1Pliers tension: 0.5 - 12 mmMain engine power: 0.5 hpPower return motor: 1/6 hpPower magazine engine: 1/6 hpWeight approx: 400 kgWith- compl. Change gear kit- 1 slider insert each- 1 additional gearbox for mehrgg. snails- 1 spindle insertdespite year of construction in very good, well-kept conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your querie ...

Gear milling machine / gear hobbing machine make NILES type RF 6 M 15Lizensbau Pfauter Chemnitz, year of construction unfortunately not visibleTechnical specifications:Wheel diameter to be milled for spur gears: 1500 mmmax. Milling to be milled: 15 Mod.Range of helical gear drm. at10 ° spiral approx.: 1500 mm20 ° spiral approx.: 1500 mm30 ° spiral approx: 1350 mm40 ° spiral approx.: 1060 mm45 ° spiral approx: 900 mm50 ° spiral "750 mm60 ° spiral approx.: 450 mmBurr turns per minute: 20-26-33-43-56-71-90-118gr. Outer diameter of the milling cutter: 200 mmDrm. Milling mandrels: 27-32-40 mmDrm. of the workpiece clamping mandrel: 60 mmRotation of the drive pulley on the machine per minute: 520Drm. the drive pulley on the machine: 500 mmWidth of the drive pulley on the machine: 130 mmPower requirement: 10 hpRotation of the engine: approx. 1000 rpmExternal dimensions of the machine: 320 ...

Hobbing machine make PFAUTER type RS 1Machine -No: 3108 built in 1941Technical specifications:largest diameter for face and worm gearswith / without counter holder: 400/750 mmlargest milling width for spur gears (up to 275 mm dia.over 275 mm diameter): 295 - 315 mmSmallest number of teeth to be milled: 12largest module division: 8Helical gearsHelical tooth angle: 10 ° 30 ° 45 ° 60 °largest millable wheel diameter: 750/600/500/200 mmMillable widths for the largest diameter: 270/270/270/270 mmmillable widths at Drm. under 275 mm: 260/250/245/235 mmClamping table diameter: 580 mmTable bore: 100 mmgreatest collet tension for shafts (large material passage64 mm): 65 mmsmallest axis distance between milling cutter and workpiece: 30 mmlargest axis distance between milling cutter and workpiece: 440 mmDrm. of the workpiece mandrel: 36 mmDrm. of the milling arbors: 27-32-40 mmLargest clampable ...

Gear hobbing machine STAEHELY mod. SH25US + n. 2 Basket sanders D 1700 and D 1400

Hobbing machine Manufacturer WMW Type ZFWZ 1250 x 14 diameter 1250mm module 14 Machine is in a used good condition. Ink. Documentation and interchangeable wheels

Hobbing machine Manufacturer Liebherr Type L400 diameter 400mm module 8 Machine is in a used good condition Incl. documentation and interchangeable wheels

EKU 750-6-1 6 burner gas stove 39 kW 6 burners 39 kW total power Stand-alone unit W 1200 x D 750 x H 850 mm open substructure More gas stoves in other sizes - new and used - can be found in our shop! International shipping costs on request!

CNC hobbing machine Manufacturer Koepfer EMAG Type K160 Year of construction 2018 diameter 100mm Longer1000mm 8 axis control Machine is in top condition

MIKRON 122.01 Gear hobbing machine Max. hobbing Ø straight/helical wheels 40 mm Max. hobbing length 40 mm Number of teeth 2 - 400 Max. module 1 Speed of the mill 250 – 2000 rpm Feed : 0.05 - 0.8 mm/R Helix pitch 15 - 2437 mm Helix angle to the right or to the left 0 - 90° Collet type W12 Weight 280 kg

Hobbing machine Manufacturer: Liebherr Type S600

From September 2022 immediately available newly overhauled Multigrind HT retrofit machine prepared for resharpening hobs / worm gear cutters / pushers and cutting rotor Control: Siemens 840 D X - axis 650 mm Y - axis 400 mm Z - axis 280 mm A - axis (dividing apparatus) 360 ° SK50 C - axis (rotary table) 270 ° X3 - axle with tailstock Grinding spindle: HSK50 Dressing unit Tool changer: 10-fold magazine plate Coolant system: Turbo Separator Suction: LTA Extinguishing system Other accessories: Available ex works Software: Customer-specific delivery Financing / hire purchase possible.

Max work-piece diameter: 1250 mm Max work-piece diameter: -With support: 850 mm -Without support: 1350 mm Max module: 12 Table diameter: 935 mm Max work-piece of producing: 2000 kg Milling length with vertical plunge cutting: 560 mm Min number of teeth machined: 20 Distance between Cutter axis and: -Arbor: 115-820 mm -Table: 230-880 mm Main motor power: 10 kW Overall dimensions: 3560x1790x2590 mm Machine weight: 14000 kg

max. work piece diameter, mm 2000 max.work piece length, mm 500 table diameter, mm 1800 max. work piece weight, kg 10000 module 20 max. diameter of installed worm mills, mm 300 max. length of installed worm mills, mm 500 main motor power, kW 14 machine weight, kg app. 32000

Gear Hobber WMW MODUL ZFWZ 1500 x 15

Gear hobbing machine OFE 22, with accessories

KOEPFER 153 Gear Hobbing machine Cutting diameter with loader 80 mm Cutting diameter without loader 142 mm Max. module 2 Cutting length 150 mm Workpiece length 300 mm Workpiece length with loader 220 mm Miller dimensions 70 x 71 mm Miller rotation speed 280 -2240 rpm Head inclination +/- 35° Dimensions : 1690 x 1410 x 1640 mm Weight 3t

Diameter capacity: 2000 mm; Maximum module: 20 mm; Max. work piece weight, kg 10000 Width of the gear: 560 mm; Spindle speed range, rpm 8...125 Main motor power: 15 kW Dimensions: mm 6910x2990x3460 Weight: 31 800 kg

Inv. Num. : 6635 Type: 16 GLS 25-90 Producer: Coburg Created: 1985 Parameters: Max. speed: 285-1700 1/min Maximum distance between tailstock tips: 4120 mm Max. thread diameter: 14-90 mm Equipment: Replacement clamping bushings Circular knife sets

MAX DIAMETER 640 MAX MODUL 8 TABLE DIAMEER 550

For sale is the following machine: Second-hand machine Type Koepfer 173 SPS Built in 1989, completely revised in 2022 The machine is equipped with Klöckner Moeller PLC control. Machine color is green, RAL6011. Speed adjustment of the cutter is carried out with inverter and speed indicator. The number of teeth of the workpiece and differential is adjusted by means of interchangeable wheels. The machine is equipped with a shift milling head with automatic shifting. 2. Technical data max. module 2.5 max. workpiece diameter, manual loading 156 mm max. workpiece diameter, automatic loading 100 mm max. toothing length 150 mm max. workpiece length, for manual loading 360 mm max. workpiece length, for automatic loading 260 mm max. cutter diameter 63 mm max. cutter length 70 mm max. cutter displacement (shifting) 70 mm Partial gearbox 4:45 Cutter speed max. 1,100 -1 ...

Surface reference plates, roughness dimensions MASSI hobbing TGL 4763 Rz 6.3 μm and Rz 20 μm in wooden box Dimensions: 240 x 120 x 30 mm

Surface reference plates, roughness dimensions MASSI hobbing TGL 0-4763, DIN4763 Rz 6.3 μm - Rz 20 μm in wooden box used, tested ! Dimensions: 240 x 125 x 40 mm

Surface reference plates, roughness measures MASSI hobbing TGL 4763 Rz 6.3 μm - Rz 20 μm in wooden box Dimensions: 240 x 125 x 40 mm

Key data: 1600 mm, 460 mm, 16

3 x heads , change gears

Key data: 460 mm, 10

BEVEL GEAR SPIRAL GENERATOR

Pfauter gear hobbing machine / module 2.5 x250 -Module 2.5mm -Wheel diameter 250mm -Mandrels -Interchangeable wheels -otherwise as pictured Dimensions: Ji7pv08nrp LxWxH 1.4x0.9x1.7 meters Weight approx. 900Kg

Gear hobbing machine 4000 mm Module 13 282

hobs, sprocket hobs WMW / PWS ( WMW/PWS ) type BP II ( BPII ) chain pitch 9,25 rollers Ø 5 mm 9317 HSS / Co bore Ø 27 mm New ! Dimensions: 70 x 70 x 57 mm

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 12 min. module: 0,5 total power requirement: 8 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 300 mm, 5

I am selling a well-used gear milling machine from WMW Modul, model ZFWZ 500x5. The machine is fully functional and runs without any problems. The foot (coolant device) and the entire machine were completely cleaned. The connection cable and plug were replaced. When sold, the entire oils are renewed. Largest wheel diameter is 500mm Largest module is 5. The weight of the machine is 1950kg. Incl. complete, original cabinet with interchangeable wheels and an instruction manual. The machine has already been overhauled. The guides show almost no signs of wear. If you have any further questions, please do not hesitate to contact us. The machine can be viewed and tested under power by prior appointment. On-site loading is no problem and free of charge. The sale is without guarantee and warranty. Returns are excluded. All information is subject to change.

CNC GEAR HOBBING MACHINE LIEBHERR LC 3000 FN Year: 2010 Control : SIMENS 840D Table diameter: 2600mm Max. workpiece diameter: 3000mm Table hole: 700mm Max. table speed: 5 RPM Center distance with external cutter head: 210…2100mm Center distance with internal cutter head: 0…1800mm Workpiece load: 300kN Max. axial travel: 1200mm Cutter head swiveling angle: +/-45 degrees Original table size is 2000mm, but the factory made a new sub table and put it on top of the original table and used it. Including external milling head, chip conveyor. All manual books available. Low working hours. Excellent working condition.

hobs, sprocket hobs JUGOALAT type BB chain pitch 31,75 Rolls Ø 19.05 mm 1018 HSS DIN 8198 bore Ø 32 mm New ! Dimensions: 120 x 120 x 40 mm

Gear hobbing machine STANKO 5B312 with change gears.

max diam 340 , max modul 8

Key data: 3000 mm, 32

1 CNC Gear Milling Machine Make: Gleason-Pfauter Model No.: P2001/3000 Year of manufacture: 1980 / Retrovit 2000 Largest milling diameter: 3000 mm Largest module: 32 Face plate diameter: 1920 mm Power main drive: 30 kw. max. workpiece weight: 25 tons. Equipment / Accessories: CNC control made by Siemens Internal gear milling head Setting Stick - Counter Holder Workpiece fixtures Interchangeable wheels various milling cutters various cutter mounts Conveyor

Hobs WMW / PWS ( WMW/PWS ) Type G pitch 3,5 HSS 9560 20° TGL 29-8002 bore Ø 40 mm New Dimensions ( cutter ): 108 x 100 x 100 mm Dimensions ( packaging ): 115 x 115 x 120 mm

Gear hobber sharpener Kapp AS 305 B

max. workpiece diameter: 250 mm threading length: 800 mm max. module: 8 min. module: 1 total power requirement: 10 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 3,05x1,75x1,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7169 Type: RM 80 Producer: Wera Created: 2002 Parameters: Operating system: SIEMENS SINUMERIK Maximum gear diameter: 80 mm Machine weight: 3500 kg

Komsomolec 5K328A Gear hobbing machine Max. work piece diameter 1250 mm Max. work piece diameter with support 850 mm Table diameter 1000 mm Module 12 Max. table load 2000 kg Min. number of processed teeth 20 Max. length of processed teeth mm: - straight 560 - 30 degrees angle 400 Main drive power 10 kW Machine dimensions 3560x1790x2590 mm Machine weight 14000 kg

Wanderer 31 L500 Screws & Thread Milling Machine -Workpiece length max. 500mm -Oscillating range above bed approx. 400mm -Spindle bore approx. 80mm -Speed range 55 - 250 rpm -Work light -Interchangeable wheels (see range) Dimensions: LxWxH 2.5x1.4x1.6 meters /Weight 2600Kg Errors / input errors excepted Coqznl9t

Description: Various spare parts for Koepfer 140 gear hobbing machines Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 300 mm, weight approx.: 75 kg

Description: Technical details: Wheel diameter - max. 406 mm, wheel width 420 mm, module - max. 4.3, module - min. 0.5, cutter speeds 49 - 246 rpm, table bore diameter 80 mm, total power requirement 7 kW Approx. Onsite Dimension. (l x w x h): 2,800 x 1,600 x 2,200 mm, weight approx.: 3,500 kg

Description: FETTE hobs with shank GREASE 2356808 GN461 DIN3968AAA 002.90 2697.1 02 m³ L1 E= 20° DIN3972 I - Stgs. 1°24 pz9.4276 HN PM3 Approx. Onsite Dimension. (l x w x h): 500 x 200 x 200 mm, weight approx.: 10 kg

Description: Gear hobbing cutter, Module 15 R1 EA 126 DIN 3968 A DIN 3972 II E-W. 20 ° c. 4 ° 21` HSS-E Frst. 33.75 Approx. Onsite Dimension. (l x w x h): 230 x 230 x 210 mm, weight approx.: 40 kg

Description: max. module: 8 mm table diameter: 370 mm largest diameter of the machined wheel: 400 mm rated power: 35 kVA chip conveyor  , equipment: shift wheel cabinet set of shift wheels shanks for mounting cutters - 5 pieces milling stands pins mounting sleeves claws for mounting pins technical and commissioning documentation and user manual in Polishwiring diagramsworm cutters  , , dimensions: installation dimensions: ,3300 x 2850 x 2300 mm transport dimensions: ,3150 x 2000 x 2300 mm control cabinet: ,1000 x 400 x 2300 mm 3 x Euro pallets with equipment: ,1200 x 800 x 500 mm tool locker: ,1000 x 650 x 1200 mm  , with equipment for cylindrical gears  , the offer does not include other elements of machines, devices and tools that are not related to the machine  , please also have a look at the videos and  ...

Description: serial number: 29660 control: SIEMENS Sinumerik 840D  , travels: X-axis: 160 mm Y-axis: 220 mm Z-axis: 350 mm max. tool diameter: 130 mm milling head swivel angle (A-axis): +/- 45°  , workpiece table: outer diameter: 200 mm clamping diameter: 150 mm bore: 45 mm max. table speed: 1000 rpm  , milling head: , drive power: 11.5 kW max. module: 3 mm max. milling cutter speed: 4000 rpm max. head circle diameter of the milling cutter: 100 mm max. cutter length: 317 mm max. cutter length (toothed): 240 mm  , rapid traverse: X-axis: 20 m/min. Y-axis: 10 m/min. Z-axis: 7 m/min.  , connected load: 40 kVA  , including: ASTOS DML200/1576/1340 Chip Conveyor, YOM: 2006, weight: 150 kg RELEN UC Compact 1 Extraction Filter, YOM: 2006, power: 0.57 kW, rotational speed: 2750 rpm, air supply 1200 m3/h  , witho ...

Description: Complete tool cabinet with 5 drawers, filled with various hobs in different sizes and modules, hobs for spur gears & helical gears, hobs for splined shafts, hobs for serrations, hobs for sprockets, hobs for toothed belt wheels, form cutters for gears, form cutters for worms, form cutters for splined shafts, etc ., weight without cabinet approx. 565 kg Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm, weight approx.: 640 kg