We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,294 used machines on RESALE, but how to find them? Machine Search
used
Diameter: 0 mm Width: 0 mm Bore: mm Tangential head for gear hobber RS 2 - also available: Tangential head for gear hobber RS 00 ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
groove width: 16 mm x-travel: 16-200 mm table length: 1500 mm table width: 375 mm milling spindle: ISO 40 max. clampable toolpiece shaft diameter: 30 mm max. useable hobs, normal diameter: 40 mm distance between milling spindle and table: 150-250 mm axial move. of milling spindle (auto./manual): 120 mm vertical adjust. of milling slide (manual): 100 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 2,00x1,40x2,40 m K4 - TECHDETAIL UK: 0,11 kW K4 - TECHDETAIL UK: 0,6/1,1 kW K4 - TECHDETAIL UK: 3 x 0,012-0,05 mm/U K4 - TECHDETAIL UK: 16x60 mm K4 - TECHDETAIL UK: 12 x 280 - 3550 U/min K4 - TECHDETAIL UK: 0,85 kW K4 - TECHDETAIL UK: 0-2,0 mm K4 - TECHDETAIL UK: 250 mm Condition: ready for production The machine is suitable for the manufacture of flutes and slots using undersize cutters with hydraulic adjustment. Roughing and finishing can be done in one single clamping. ...
used
max. grinding diameter: 320 mm grinding length: 500 mm workpiece length: 700 mm total power requirement: 10 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m Height of centres 220 mm Distance between centres / clamping length 750 / 500 mm Table size 290 x 1,600 mm Intermediate table 110 x 1,200 mm X / Y / Z axes 500 / 320 / 320 mm Feed speeds, X, Y & Z axes 0.005 - 5 m/min Grinding head swivelling, vertical axis, manual 200 ° Grinding head tilting, manual +/- 90 ° Speed range of R axis, approx. 0 - 50 rpm Grinding spindle speeds, infinitely variable, approx. 2,000 - 12,000 rpm Workpiece holding fixture 50 ISO Indexing 1 - 999 ° Leads 0.5 - 10,000 mm Spindle drive 4 kW Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4,000 kg Accessories / Special Features SCHÜTTE CNC Continuous Path Control for 4 axes with SIEMENS/BOSCH components and SIEMENS ...
used
hobbing length: 2100 mm milling width: 300 mm max. module: 16/18 min. module: total power requirement: 10 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
hobbing length: 1750 mm milling width: 260 mm max. module: 10 min. module: 12 total power requirement: 8 kW weight of the machine ca.: 4500 kg dimensions of the machine ca.: m D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Model UZFM – V 300 H Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 ...
used
Planer-saw combination copper mill DK-14 Year of construction 1982 Working width 605 mm Working height 200 mm Number of spindles 3 Shaft arrangement Hobewelle bottom+top / Saw shaft bottom Spindle speed 6000 rpm Motor power 5.5 - 7.5 - 30 kW Feed speeds 7 - 23 m/min Feed motor 2.2 / 3 kW Driven rollers in table 3 Feed rollers top 4 Yt9k30 Transport rollers in extract 2 Tool head horizontal dia. 126mm, L=610mm Chip removal below 12 mm Chip removal top 20 mm Suction nozzle diameter 140-140-120 mm Weight 3500 kg Space requirement 1500 x 1900 x 1500 mm Voltage / Frequency 380V 50Hz 3Ph Cutting height saw max.: 50mm Saw blade diameter max.: 250mm
used
Hydraulic tailstock, Ø max. gear: 250 with 3 cutter, Module: 5,5, Hobbing length: 70, Cutter module: 5,5, Outside ø max. acknowledged: 300 mm, Ø spindle: 85 mm, Ø hole table: 39 mm, Ø table: External centering Ø139,75, Power tool motor (b): 4 Cv, High: 1.800 mm, Long: 1.450 mm, Weight: 2.450 Kg, Width: 1.000 mm
used
Stroke: 750 mm Make Atlas shaping Type W 7 Year shaping / kurzhobel hobel maschine Stroke = 750 mm X / Y = 490 x 500 Stroke tool holder = 175 Head rotation + / - 60 Gr.- Table = 560 x 480 - Speed 12 - 132 M/min
used
No. 5104: 1 gebr. Coordinate measuring machine / CMM - Hobbyist device / ET carrier - Fabr. WENZEL / NUMEREX, Type 1318-10 Mnl, Bauj. 1987 Arb.-Ber.: 330 x 440 x 180 mm, Other: Space requirement approx. 1 x 1 x 1.5 m Weight approx. 300 kg
used
Steaker / Fleischmürber / Strip Cutter Manufacturer: BIZERBA / Type: S111 PLUS Specifications: 230 V / 50 Hz / 2.7 A Weight: 32 kg including 3 mm strip cutter insert Function tested, machine ready for use Sale as a defect/hobbyist device because sheet metal damage to side panel, see original pictures! Condition, see original pictures! If you have any questions, email or call.
used
machine measurements: -- mm machine weight: -- kg power capacity: -- kW Condition: used Specification: dosing unit type SiloStar 922 A - second-hand - for dosing liquid silicone LS - container: 20 litre hobbocks and 200 litre drums - Power connection: 400V, 50Hz Equipment of the plant with: - Fardoser SPS P1 - Mixer / material pressure regulator cooled with outlet valve - roll-in device - Pressure and material shortage protection - Machine connection outlet valve and pressure regulator - Pressure vessel Colour The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
HOFLER HF 2000L hobber/gasher with both internal/external heads Year: 2013 Installed in 2020 Less that 200 working hours Table diameter: 1500mm Table loading: 18000kg Working stroke (external hobbing): 1760mm Working range above table (external hobbing): 150-1910mm Working range above table (internal hobbing): 250-1460mm Counter support-end face above table: 800-2300mm External toothing, Max: 2000mm Internal toothing, Max: 2400mm CNC control: Siemens 840D Complete weight: 61000kg Equipped with counter support
used
Stephan MCV10 Microcut, continuous cutter, colloid mill, koial mill, emulsifier Voltage: 400V Speed: 2850rpm Stainless steel funnel Machine heavily soiled and with rust deposits on the housing without nameplate very loud run, because bearing damage, therefore sale as spare parts donor or hobbyist object Video about test run available
used
Key data: 4 , 220 , 120
Guiliet Profilier and Hobelautmat with Wepla heads Model: 220 KXR 220 Year built:1990 Condition: very good (used) MAX CROSS-SECTION 220 X 120 MM MIN CROSS-SECTION 30 X 6 MM ENTRANCE TABLE 2000 MM long. PLANING SHAFTS 40 MM Dressing shaft 5.5 kW right and left planing shaft combined 5,5kW Thickness planer shaft 5.5 kW WEIGHT APPROX. 1600 KG Cleaned, maintained and functionally tested. If necessary, we can gladly offer planing heads with continuous cutting edges.
used
CNC GEAR HOBBING MACHINE LIEBHERR LC 3000 FN Year: 2010 Control : SIMENS 840D Table diameter: 2600mm Max. workpiece diameter: 3000mm Table hole: 700mm Max. table speed: 5 RPM Center distance with external cutter head: 210…2100mm Center distance with internal cutter head: 0…1800mm Workpiece load: 300kN Max. axial travel: 1200mm Cutter head swiveling angle: +/-45 degrees Original table size is 2000mm, but the factory made a new sub table and put it on top of the original table and used it. Including external milling head, chip conveyor. All manual books available. Low working hours. Excellent working condition.
used
HOBBING MACHINE - LIEBHERR S 800 /Lorenz workpiece with counter holder 600mm workpiece with retracted holder 800mm distance of the milling carriage 360mm Largest millable pitch b. largest workpiece 5Pi in the normal power range 8 Pi Receiving cone - milling spindle MK 5 Milling mandrel 22/27/32/40mm milling cutter diameter 186mm cutter length 170mm milling cutter displacement 80mm Milling cutter speeds 40-220 rpm Feeds infinitely variable/vertical Feeds infinitely variable/horizontal Feeds infinitely variable / tangential Clamping table without water rim 550mm Clamping table bore 100mm Mandrel cone MK5 Mandrel 36mm COMPLETE TECHNICAL DATA CAN BE SENT BY E-MAIL BE SENT. ACCESSORIES SEE PICTURES. 1xpallet interchangeable wheels 1xPalette hobs 1xpallet clamping/mandrel Documentation Machine feet Chbaacmi7q Dimensions: LxWxH 3.6x1.8x1.9 meters Weight a ...
used
Schneeberger Aries ENP4 CNC Precision Tool Grinding Machine Manufacturer [manufacturer]: Schneeberger Type [ type]: Aries ENP4 Control unit: Fanuc control, 2 CNC axes, simultaneous interpolation 10.4" LCD color touchscreen, RS232 Baujahr[construction year]: 10/2008 Tool and cutter grinder Note: Ideal for tooling and sharpening Optimal grinder for grooving, circumferential, flank, front, rear and flank surfaces Axes Longitudinal travel X mm 400 (CNC) Transverse travel Y mm 260 (CNC) Vertical travel Z mm 300 (CNC) Workpiece rotation A degree free (CNC) C-axis, manual, position indicator integrated in the control unit. Resolution of the measuring system: 0.001°, grinding head ±180° rotatable Center height mm 210 Landing cone ISO50 Spindle Drive power kW 2.2 / 7.5 Double spindle HSK 50 - (2 + 2 grinding wheels) Spindle speed 1/min 9000 Grinding wheel diameter ...
used
Belt cylinder HÖBRIGER-ORIGA Ø 40 x 500 stroke series 120
used
Ecamo Supermatic BS relief powder line; is sold as a hobbyist's device, the conveyor belt of the boom is defective. Relief powder machine Ecamo Supermatic BS; only for spare parts; belts of the feeder are broken.
used
turning diameter over bed: 350 mm turning diameter over slide rest: 200 mm turning length: 800 mm spindle bore: 46 mm spindle turning speed range: 18: 25 - 2000 U/min spindle head: Din 55027 Gr. 5 total power requirement: 4,4/2,2 kW weight of the machine ca.: 800 kg dimensions of the machine ca.: 2 x 1 x 1,8 m Video available on our website.: Condition: ready for operation: Electric 380 Volt: 3 jaw chuck: neu 160 mm Multifix-toolholder with tapers: Rear chip protect: Faceplate: Röhm 310 mm Motor brake: Universal lathe from the training area with new 3-jaw chuck, face plate and multifix holder. It was not heavily used, which can be seen from the little paint wear on the back wall. We ask interested private parties to refrain from making an inquiry, as it is a well-preserved professional machine and is therefore too expensive (+ VAT!) for hobby mechanics. Machine dealer with own sto ...
used
Gear cutters, module cutters, tooth form cutters, module milling heads, shell end mills, shell cutters, milling cutters, hobs, spline shaft hobs -Manufacturer: WMW PWS, 29 pieces hobs -Recording: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Various types: see photos, more pictures can be sent -Price: complete -Dimensions: 490/300/H70 mm -Total weight: 30.7 kg
used
Gear cutters, module cutters, tooth form cutters, module milling heads, shell end mills, shell cutters, milling cutters, hobs, spline shaft hobs -Manufacturer: Fette/JAL, 23 pieces of hobs -Recording: Ø 16 mm 13 pieces, Ø 22 mm 4 pieces, Ø 27 mm 6 pieces -Various types: see photos, more pictures can be sent -Price: complete -Dimensions: 250/170/H90 mm -Total weight: 9.8 kg
used
Gear cutters, module cutters, gear cutters, module milling heads, shell end mills, shell milling cutters, milling cutters, hobs, spline hobs -Manufacturer: WMW PWS, 17 pieces of hobs -Intake: Ø 27 mm 4 pieces, Ø 32 mm 7 pieces, Ø 40 mm 6 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 400/400/H150 mm -Total weight.: 52.5 kg
used
hobbing length: 1750 mm milling width: 260 mm max. module: 10 table size incl. water gutter: 460 x 2100 mm table clamping surface:: 250 x 1850 mm cutter width - max.: 100 mm feed of the milling slide, stepless: 0 - 500 mm/min. rapid traverse feeds: 3000 mm/min milling head -swivable +/-: 30 ° Rotation speed range of milling head, in 9 steps: 29 - 178 rpm Milling head swivable 2 sides helical gearcutting: 30 ° total power requirement: 4 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 4 x 1,85 x 1,85 m Accessories: Change gears Milling arbors Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Mazak Integrex 200-IV ST Ø 660 x 1500 mm Control Unit: Mazatrol Matrix Maximum turning diameter : 660/260 mm Maximum turning length : 1.495 mm Milling spindle speed : 12.000 rpm Main spindle maximum speed : 5000 rpm Subspindle maximum speed : 5000 rpm ATC 40 Capto C6 system 9-station turret swarf conveyor 2 Stck. 3-jawchuck Kitagawa B-208 5-axis simultaneous Full C-axis sub spindle Flash-Tool Synch. MillTapp Gear Hobbing CE-Zeichen Come with tools purchased
used
workpiece dia.: 100 mm module: 3.0 mm fixture slide travel: 400 mm Control: Siemens - Sinumerik 840 D max. milling cutter diameter: 80 mm cutter length max.: 180 mm turning speed range: 50 - 12.000 U/min table turning speeds: 3.000 U/min Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached extraction system: Ringler, - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle - AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - Workspace, - tailstock, - measuring device, - refrigeration system, - Industrial robots: Epson, - goods carrier, - conveyor belts, - control panel, The machine is in very goo ...
used
tool taper: MK4 diameter of tools max.: Ø 145 mm table-size: L: 800 x B: 700 mm surface area: Ø 300 mm table travel: 200 mm total power requirement: 7,5 kW weight of the machine ca.: 4,9 t dimensions of the machine ca.: 2,8 x 1,5 x 2,3 m Additional information: Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: -counter-point taper MK4, co-rotating -Centre distance of ...
used
workpiece dia.: 80 mm module: 2,5 mm fixture slide travel: 220 mm Control: Siemens - Sinumerik 840 D max. milling cutter diameter: 100 mm cutter length max.: 160 mm turning speed range: 200 - 5.000 U/min table turning speeds: 3.000 U/min Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached exhaust system for dry processing: Ringler, - Noise insulation for dry milling machine - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - coolant device, - Automation unit: AMZ, The machine is in very good condition. For additional equipment information p ...
used
Ref.-No. 00764 Designation of the plant: Spare parts machine, saw To hobbyists Manufacturer: Wassmer Spezialmaschinen GmbH Model FBM 06 Year of construction: 1989 Volt 380 Frequency 50 Week 47 Ampere 125 Plant is sold as a spare parts machine A circuit board would probably have to be replaced – system currently not under function
used
folding machine Multigraf Foldmaster 235.122; is sold as a hobbyist tool; rollers defective; errors in the display; Folded pockets and delivery work. Folding machine Multigraf Foldmaster 235.122; only for spare parts; rollers damaged; error in display; pockets and delivery are ok.
used
On sale is a complete line for the production of longitudinal and transverse plates. 1. Weinig Dimter high frequency press. 2. Grecon Ultra4 longitudinal line. 3. Line for width connection Obel. 4. Hobelrotoles. 5. Timesavers 1350 mm grinding machine with three units. 6. Planer Schenko (with lifting platform for parcels) + conveyor belt + charger. 7. SLH cold width press. 8. Thermal tunnel for individual packaging of plates. 9. Glue applicator Inles. 10. Glue applicator for slats. 11. Obles line for longitudinal connection of slats.
used
Inv. Num. : 6855 Type: MA 1900 Producer: Motoman Created: 2012 Parameters: Operating hours: 2200 h The workstation consists of the following parts: Motoman MA 1900 Robot (DX 100 Controller) Source: Lorch Saprom Speed Pulse S8 Tbi Welding Torch GUDEL track - type TMF-1/4000 - with a carriage for a barrel with welding wire 2x fixed table with dimensions 2000x1500 mm and a load capacity of 650 kg Horizontal positioner WESTAX WXH-150 (load capacity 1500 kg) 3x internal automatic workstation doors 3x external telescopic doors 3x SICK safety scanners Automatic cooker hood 2x manually hinged hood Superior control system WESTAX RCU 50 TBI JetStream Automatic Welding Torch Cleaner Positioning frame in HOBES for the storage of fixtures Fencing of the robot workstation
used
CNC milling machine KNUTH WF 1 CNC The CNC milling machine of the renowned KNUTH brand, model WF 1 CNC, built in 1992, offers precise milling results and reliable performance. This used machine is ideal for beginners and hobbyists. Specifications: - Table clamping surface: 270 x 700 mm - Table movement longitudinal (X): 300 mm - Table movement vertical (Y): 200 mm - Table movement transverse (Z): 350 mm - Spindle mount horizontal and vertical: ISO 40 - 8 spindle speeds horizontal: 110 - 1230 rpm - 8 spindle speeds vertical: 150 - 1660 rpm - 8 feeds: 26 - 290 mm/min - Rapid traverse: 1100 mm/min - Quill travel: 60 mm - Drive power: 3.7 kW - Dimensions: approx. 1310 x 1380 x 1650 mm - Weight: approx. 1000 kg The machine is in a used condition and in need of repair. It has proven to be extremely reliable and will continue to work reliably for many years to come. With i ...
used
Hohner Boston Crucible OTTO HOHNER KG TUTTLINGEN Type: HOBO 1 Ma. No.: 1961 Closing frame internal dimensions: 16.5 x 23.0 cm Cleaned, Tested and Printed English Hohner Boston Crucible OTTO HOHNER KG TUTTLINGEN Type: HOBO 1 Serial: 1961 Frame: 16.5 x 23.0 cm Cleaned, checked and test printed
used
Description: Machine number: 1221 BL number: 140710 Table dimensions: approx. 745 x 160 mm With 3 T-slots Table movements: Lengthwise (by spindle or automatically): 260 mm Vertical (by spindle only): 310 mm Longitudinal (by means of lever): 235 mm Automatic table movements: 8 longitudinal feeds: 11 - 210 mm/min 8 vertical feeds: 11 - 210 mm/min Fast feed of the table: Longitudinal and vertical: 1000 mm/min Spindle head: Steep taper with driver according to standard ISO30 N.S.11/4' VSN33931 size 32 DIN2079 size 30 Spindle bore: diameter 15 mm Spindle speeds (infinitely variable by means of speed controller): 58 - 2000 rpm With accessories as shown in the pictures, including counter holder with horizontal spindles, with the corresponding side milling cutters, hobbing cutters and other cutters With technical documentation as shown in the pictures Approx. Onsite Dimension. (l x w x h): 1,050 ...
used
workpiece dia.: 100 mm Control: Siemens 840D weight of the machine ca.: 5 t Worm milling head with toothed belt drive. With infinitely variable high-performance drive and maintenance-free bearing. Spindle with hollow shank taper for holding milling arbor with counter bearing. - Workpiece spindle with direct and maintenance-free drive. Equipment: - CNC Siemens 840D - Cooling tank - chip conveyor Product data : - Diameter : 100 mm - Nominal module hobbing : approx. 3.0 mm Endless screw milling : approx. 5.0 mm - Max. axial movement : 320 mm - Cutting head orientation : -45 / + 115 ° - Main milling cutter max. diameter : 118 mm - Max. Max. cut-out length of the post cutter : 180 mm - Max. Mill movement ( shifting) : 160 mm - Max. Spindle speed of the workpiece carrier : 3000 t/mm - Min./max. distance between axes : 10/100 mm - Cutting head motor power : 14 kW - Main milling speed : 50-12 ...
used
max. wheel diameter: 1200 mm gear width: ca. 800 mm max. module: 25/35 Control: Simens 840 D PL workpiece diameter: 1200 mm Hobbing approx.: 25 mm tooth form milling approx.: 35 mm axial slide travel: 1000 mm table diameter: 1200 mm table bore diameter: 300 mm table load: 15000 kg total power requirement: 110 kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 8,1 x 6,2 x 3,8 m Equipment/Accessoires: - Motor milling head M3 special speed series - Colum - increased 1. 000 mm - Clamping device - Dialogue program Milling in single-indexing process” - Telephone diagnostic system - swivelable counter bearing holder - measuring device - machine with counter steady - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: - Hobs for spur gears & helical wheels, - Hobs for splined shafts, - Hobs for splines, - Hobs for sprockets, - Hobs for timing belt wheels, quantity 44 PCS weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 350 mm
used
CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...
used
Old clipper for sale. Still running, but very unreliable. For hobbyists etc. or as a spare parts warehouse.
used
Description: Date of first registration: 18 February 1994 Mileage: 27832 Displacement: 583 cm³ Rated power in kW/rated speed at 1/min: 29/6500 Fuel type: Petrol With vehicle registration document and vehicle license Vehicle is not registered Important note: Motorcycle is delivered without the vehicle key delivered. Vehicle is a vehicle for hobbyists Color: blue/black Approx. Onsite Dimension. (l x w x h): 2,350 x 1,000 x 1,200 mm, weight approx.: 160 kg
used
Description: Total permissible weight: 432 kg Engine capacity: 643 cm³ Top speed: 197 km/h Power: K52/9400 kW at 1/min Color: red Mileage: 77580 Important note: Vehicle is a hobbyist vehicle Vehicle is not registered Approx. Onsite Dimension. (l x w x h): 2,200 x 800 x 1,500 mm, weight approx.: 255 kg
used
Description: Date of first registration: 29 February 1996 Top speed: 158 km/h Engine capacity: 499 cm³ Permissible total weight: 374 kg Power: K25/8500 kW at 1/min With vehicle registration and vehicle license Vehicle is not registered Attention: Vehicle is only suitable for hobbyists Color: red Mileage: 46107 Approx. Onsite Dimension. (l x w x h): 2,200 x 1,000 x 1,300 mm, weight approx.: 190 kg
used
Description: First registration: 1985 Power: K74/9000 kW at 1/min Displacement: 1084 cm³ Permissible total weight: 450 kg With vehicle registration document Important note: Motorcycle is a vehicle for hobbyists Color: red Mileage: 51068 Vehicle is not registered Approx. Onsite Dimension. (l x w x h): 2,100 x 900 x 1,300 mm, weight approx.: 252 kg
used
Key data: 560 mm, 500 mm, 400 mm
used milling machine Mikron WF31D Control Heidenhain TNC355 electric handwheel Spindle speed 4000 rpm Feed rate 2-3000 mm/min Adapter SK40 Vertical milling head removable Documentation Can be tested under power Prices do not include VAT (domestic). The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved. Mechanische Werkstätte Höbbelmann GmbH Niederkasseler Str. 3a 51147 Cologne Phone: 02203/83584 eMail: hoebbelmannt-online.de
Capacity: 100 t Stroke: 355 mm Die length: 585 mm Die width: 620 mm Hydraulic pressSack Kiesselbach - HSVP 1000 Hydraulic cold hobbing press Swaging (wire rope clamps) Cold flow pressing (non ferrous material) Medal coining Bottom ejector Capacity Kg: 100000 Distance between column:585mm Table Length: 585mm Table Width: 620mm Table Height: 1000mm Ram stroke: 355mm Approche speed: 200mm/min. Working speed: 8.5mm/min. Return speed: 200mm/min. Power: 37kW Length: 3700mm W ...
used
max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...
used
max. wheel diameter:5 - 260 mm gear width:400 mm max. module:15 min. module:0,5 gear hobbing diameter - internal:30 mm max. helix angle:> 85 ° Aussenverz. max. helix angle:> 45° Innenverz. Testing Range vertical:400 mm dist. between centers:5 - 600 mm table diameter:260 mm max. table load:100 kg speeds:30 1/min total power requirement:1,6 kVA weight of the machine ca.:900 kg dimensions of the machine ca.:200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.)
used
Deck Oven Wachtel Columbus C520/120M Deck oven with 5 decks one above the other. Front in stainless steel, side panels and rear panel in stainless steel. All decks with interior lighting and cooker doors made of stainless steel. Natural stone hobs. Burner arrangement at the front below the decks. Year of construction: 2017 Deck dimensions: width 1200mm, depth 2000mm, height 165mm, Height of top deck 205 mm Baking area: 12.0 sqm External dimensions: width 1620mm, depth 2780mm, height 2345mm Heat output oil firing: 8.6 kg/h Elco oil burner for Columbus C520/120M Furnace control including energy management IQ Touch computer control Computer control with touch screen and smartphone character with tempered glass user interface and high-resolution 9 inch color screen